Nan Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nan Hu has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Li-Wu Fan
State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou, People’s Republic of China
12 shared publications Li-Wu Fan
5 shared publications- Howard A. Stone
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544 USA
4 shared publications Xiang Gao
Zhejiang University
4 shared publicationsZi-Rui Li
4 shared publicationsRun-Hui Zhang
3 shared publications
Latest Publications
- Open Access
- 31 August 2026
- Published by Springer Nature in Research Square
Universal mapping of drop impact spreading from wetting to Leidenfrost regimes
We establish a universal mapping between the maximum spreading of a drop under wetting and Leidenfrost impact conditions from an energy-dissipation perspective, with the latter featuring a stable vapor film between the drop and the substrate. Experiments and direct numerical simulations demonstrate that the mapping remains valid over two to three orders of magnitude in the Ohnesorge and Weber numbers. This framework provides a simple route for converting established predictions for wetting impacts into their Leidenfrost counterparts, with implications for predicting and controlling droplet impact.
- 31 August 2026
- Published by Springer Nature in Research Square
Open AccessUniversal mapping of drop impact spreading from wetting to Leidenfrost regimes
We establish a universal mapping between the maximum spreading of a drop under wetting and Leidenfrost impact conditions from an energy-dissipation perspective, with the latter featuring a stable vapor film between the drop and the substrate. Experiments and direct numerical simulations demonstrate that the mapping remains valid over two to three orders of magnitude in the Ohnesorge and Weber numbers. This framework provides a simple route for converting established predictions for wetting impacts into their Leidenfrost counterparts, with implications for predicting and controlling droplet impact.
- 14 May 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (20) , 14738-14748
Unraveling Non-aqueous Phase Liquid (NAPL) Migration Regimes during Water–NAPL Co-boiling under Heating-Induced Unsaturated Conditions: Insights from Two-Dimensional Sandbox Visualization
In situ thermal remediation of non-aqueous phase liquid (NAPL)-contaminated soils involves coupled heat transfer, phase change, and multiphase migration processes, which complicate the interpretation of temperature signals. Under fully saturated conditions, NAPL pools remain capillarity confined and co-boiling proceeds in place, often producing temperature plateaus that reflect local phase change and removal. However, heating-induced desaturation can alter capillary entry resistance and phase connectivity, enabling NAPL redistribution and modifying the temperature response. In this study, a controlled two-dimensional sandbox system with spatially resolved temperature measurements and visualization was used to investigate NAPL migration and temperature behavior under saturated and heating-induced unsaturated conditions. Four representative NAPLs (n-hexane, n-octane, trichloroethylene, and perchloroethylene) were examined. The results show that, under saturated conditions, co-boiling remains spatially localized and temperature plateaus correspond to local removal behavior. Under heating-induced desaturation, reduced capillary constraints and evolving phase connectivity allow NAPL migration, leading to shortened, shifted, or absent temperature plateaus. LNAPLs primarily migrate with declining water saturation, while DNAPLs tend to redistribute toward deeper and cooler regions. These observations provide a mechanistic basis for understanding how the temperature response is influenced by saturation-dependent migration behavior. The results indicate that temperature plateaus remained representative of local NAPL removal when co-boiling occurred in place but became less representative of local residual distribution when redistribution occurred under heating-induced desaturation.
- 14 May 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (20) , 14738-14748
Unraveling Non-aqueous Phase Liquid (NAPL) Migration Regimes during Water–NAPL Co-boiling under Heating-Induced Unsaturated Conditions: Insights from Two-Dimensional Sandbox Visualization
In situ thermal remediation of non-aqueous phase liquid (NAPL)-contaminated soils involves coupled heat transfer, phase change, and multiphase migration processes, which complicate the interpretation of temperature signals. Under fully saturated conditions, NAPL pools remain capillarity confined and co-boiling proceeds in place, often producing temperature plateaus that reflect local phase change and removal. However, heating-induced desaturation can alter capillary entry resistance and phase connectivity, enabling NAPL redistribution and modifying the temperature response. In this study, a controlled two-dimensional sandbox system with spatially resolved temperature measurements and visualization was used to investigate NAPL migration and temperature behavior under saturated and heating-induced unsaturated conditions. Four representative NAPLs (n-hexane, n-octane, trichloroethylene, and perchloroethylene) were examined. The results show that, under saturated conditions, co-boiling remains spatially localized and temperature plateaus correspond to local removal behavior. Under heating-induced desaturation, reduced capillary constraints and evolving phase connectivity allow NAPL migration, leading to shortened, shifted, or absent temperature plateaus. LNAPLs primarily migrate with declining water saturation, while DNAPLs tend to redistribute toward deeper and cooler regions. These observations provide a mechanistic basis for understanding how the temperature response is influenced by saturation-dependent migration behavior. The results indicate that temperature plateaus remained representative of local NAPL removal when co-boiling occurred in place but became less representative of local residual distribution when redistribution occurred under heating-induced desaturation.
- Open Access
- 16 February 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (7)
Close-contact melting regulated by structured slip surfaces
This paper investigates the close-contact melting (CCM) of phase change materials on effective slip surfaces enabled by superhydrophobic microgroove structures. The CCM of ice cubes on hydrophobic grooved surfaces with different parameters is measured, and a modified theoretical framework is developed to account for the spatial variation of the liquid–gas meniscus induced by the pressure gradient along the flow direction. The modified model predicts lower melting rates, attributed to the smaller equivalent average meniscus curvature (i.e., a flatter meniscus), which reduces the slip length and slows the drainage of the melt film. The experimental results validate that the heat transfer of CCM can be further enhanced under specific groove geometry conditions for the first time and confirm the predictions of the modified model. A detailed test of varying superheat conditions was conducted to verify the applicability of the model. These findings provide experimental support and application potential for using slippery surfaces to enhance CCM under specific conditions, which is of great significance for scientific exploration and engineering applications, including thermal management and thermal energy storage.
- 16 February 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (7)
Open AccessClose-contact melting regulated by structured slip surfaces
This paper investigates the close-contact melting (CCM) of phase change materials on effective slip surfaces enabled by superhydrophobic microgroove structures. The CCM of ice cubes on hydrophobic grooved surfaces with different parameters is measured, and a modified theoretical framework is developed to account for the spatial variation of the liquid–gas meniscus induced by the pressure gradient along the flow direction. The modified model predicts lower melting rates, attributed to the smaller equivalent average meniscus curvature (i.e., a flatter meniscus), which reduces the slip length and slows the drainage of the melt film. The experimental results validate that the heat transfer of CCM can be further enhanced under specific groove geometry conditions for the first time and confirm the predictions of the modified model. A detailed test of varying superheat conditions was conducted to verify the applicability of the model. These findings provide experimental support and application potential for using slippery surfaces to enhance CCM under specific conditions, which is of great significance for scientific exploration and engineering applications, including thermal management and thermal energy storage.
- Top Cited Papers
- 7 January 2026
- Published by Springer Nature in Nature
- Vol. 649 (8096) , 360-365
Pulse heating and slip enhance charging of phase-change thermal batteries
Phase-change thermal batteries for renewable energy storage and waste heat recovery demand high energy density and fast charging1,2,3,4,5, which are mutually exclusive because phase-change materials (PCMs) with high melting enthalpy are usually poor heat conductors6,7,8. The charging rate can be improved by making composite phase-change materials (CPCMs) with increased thermal conductivity9 and/or by exerting an external force to realize close-contact melting (CCM)10,11,12. However, these methods inevitably result in energy density losses and/or extra energy consumption. Here we report a strategy to boost the charging rates without sacrificing energy density, based on a rational design of a composite coating that enables slip-enhanced close-contact melting (sCCM) inside sealed thermal batteries. Using organic PCMs, we demonstrate a record-high power density of 1,100 ± 2% kW m−3 in a prototype. Our coating design integrates a pulse-heated (PH) layer that premelts the PCM to initiate CCM, together with a liquid-like slip surface that ensures unimpeded sinking of the remaining solid and sustains the sCCM mode throughout charging. We develop a model to explain how the slip surface enhances the charging rate. With high cycling life, adaptability and scalability, this strategy is generalizable to diverse PCMs, enabling high-performance thermal energy storage over a wide range of temperatures.
- 7 January 2026
- Published by Springer Nature in Nature
- Vol. 649 (8096) , 360-365
Top Cited PapersPulse heating and slip enhance charging of phase-change thermal batteries
Phase-change thermal batteries for renewable energy storage and waste heat recovery demand high energy density and fast charging1,2,3,4,5, which are mutually exclusive because phase-change materials (PCMs) with high melting enthalpy are usually poor heat conductors6,7,8. The charging rate can be improved by making composite phase-change materials (CPCMs) with increased thermal conductivity9 and/or by exerting an external force to realize close-contact melting (CCM)10,11,12. However, these methods inevitably result in energy density losses and/or extra energy consumption. Here we report a strategy to boost the charging rates without sacrificing energy density, based on a rational design of a composite coating that enables slip-enhanced close-contact melting (sCCM) inside sealed thermal batteries. Using organic PCMs, we demonstrate a record-high power density of 1,100 ± 2% kW m−3 in a prototype. Our coating design integrates a pulse-heated (PH) layer that premelts the PCM to initiate CCM, together with a liquid-like slip surface that ensures unimpeded sinking of the remaining solid and sustains the sCCM mode throughout charging. We develop a model to explain how the slip surface enhances the charging rate. With high cycling life, adaptability and scalability, this strategy is generalizable to diverse PCMs, enabling high-performance thermal energy storage over a wide range of temperatures.
- 23 July 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 135 (4) , 048201
Revealing Actual Viscoelastic Relaxation Times in Capillary Breakup
We use experiments and theory to elucidate the size effect in capillary breakup rheometry, where prestretching in the viscocapillary stage causes the apparent relaxation time to be consistently smaller than the actual value. We propose a method accounting for both the experimental size and the finite extensibility of polymers to extract the actual relaxation time. A phase diagram characterizes the expected measurement variability and delineates scaling law conditions. The results refine capillary breakup rheometry for viscoelastic fluids and advance the understanding of breakup dynamics across scales.
- 23 July 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 135 (4) , 048201
Revealing Actual Viscoelastic Relaxation Times in Capillary Breakup
We use experiments and theory to elucidate the size effect in capillary breakup rheometry, where prestretching in the viscocapillary stage causes the apparent relaxation time to be consistently smaller than the actual value. We propose a method accounting for both the experimental size and the finite extensibility of polymers to extract the actual relaxation time. A phase diagram characterizes the expected measurement variability and delineates scaling law conditions. The results refine capillary breakup rheometry for viscoelastic fluids and advance the understanding of breakup dynamics across scales.
- Open Access
- 10 May 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1010
Close-contact melting on hydrophobic textured surfaces: confinement and meniscus effects
We investigate the dynamics of close-contact melting (CCM) on ‘gas-trapped’ hydrophobic surfaces, with specific focus on the effects of geometrical confinement and the liquid–air meniscus below the liquid film. By employing dual-series and perturbation methods under the assumption of small meniscus deflections, we obtain numerical solutions for the effective slip lengths associated with velocity $\lambda$ and temperature $\lambda _t$ fields, across various values of aspect ratio $\Lambda$ (defined as the ratio of the film thickness $h$ to the structure’s periodic length $l$ ) and gas–liquid fraction $\phi$ . Asymptotic solutions of $\lambda$ and $\lambda _t$ for $\Lambda \ll 1$ and $\Lambda \gg 1$ are derived and summarised for different surface structures, interface shapes and $\Lambda$ , which reveal a different trend of $\lambda$ for $\Lambda \ll 1$ and depending on the presence of a meniscus. In the context of constant-pressure CCM, our results indicate that longitudinal grooves can enhance heat transfer under the effects of confinement and a meniscus when $\Lambda \lesssim 0.1$ and $\phi \lt 1 - 0.5^{2/3} \approx 0.37$ . For gravity-driven CCM, the parameters of $l$ and $\phi$ determine whether the melting rate is enhanced, reduced or nearly unaffected. We construct a phase diagram based on the parameter matrix $(\log _{10} l, \phi )$ to delineate these three regimes. Lastly, we derive two asymptotic solutions for predicting the variation in time of the unmelted solid height.- 10 May 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1010
Open AccessClose-contact melting on hydrophobic textured surfaces: confinement and meniscus effects
We investigate the dynamics of close-contact melting (CCM) on ‘gas-trapped’ hydrophobic surfaces, with specific focus on the effects of geometrical confinement and the liquid–air meniscus below the liquid film. By employing dual-series and perturbation methods under the assumption of small meniscus deflections, we obtain numerical solutions for the effective slip lengths associated with velocity $\lambda$ and temperature $\lambda _t$ fields, across various values of aspect ratio $\Lambda$ (defined as the ratio of the film thickness $h$ to the structure’s periodic length $l$ ) and gas–liquid fraction $\phi$ . Asymptotic solutions of $\lambda$ and $\lambda _t$ for $\Lambda \ll 1$ and $\Lambda \gg 1$ are derived and summarised for different surface structures, interface shapes and $\Lambda$ , which reveal a different trend of $\lambda$ for $\Lambda \ll 1$ and depending on the presence of a meniscus. In the context of constant-pressure CCM, our results indicate that longitudinal grooves can enhance heat transfer under the effects of confinement and a meniscus when $\Lambda \lesssim 0.1$ and $\phi \lt 1 - 0.5^{2/3} \approx 0.37$ . For gravity-driven CCM, the parameters of $l$ and $\phi$ determine whether the melting rate is enhanced, reduced or nearly unaffected. We construct a phase diagram based on the parameter matrix $(\log _{10} l, \phi )$ to delineate these three regimes. Lastly, we derive two asymptotic solutions for predicting the variation in time of the unmelted solid height. - Open Access
Close-contact melting on hydrophobic textured surfaces: Confinement and meniscus effects
We investigate the dynamics of close-contact melting (CCM) on gas-trapped hydrophobic surfaces, with specific focus on the effects of geometrical confinement and the liquid-air meniscus below the liquid film. By employing dual-series and perturbation methods, we obtain numerical solutions for the effective slip lengths associated with velocity $λ$ and temperature $λ_t$ fields, across various values of aspect ratio $Λ$ (defined as the ratio of the film thickness $h$ to the structure's periodic length $l$) and gas-liquid fraction $φ$. Asymptotic solutions of $λ$ and $λ_t$ for $Λ\ll 1$ and $Λ\gg 1$ are derived and summarized for different surface structures, interface shapes and $Λ$, which reveal a different trend for $λ$ and $Λ\ll 1$ and the presence of a meniscus. In the context of constant-pressure CCM, our results indicate that transverse-grooves surfaces consistently reduced the heat transfer. However, longitudinal grooves can enhance heat transfer under the effects of confinement and meniscus when $Λ\lessapprox 0.1$ and $φ< 1 - 0.5^{2/3} \approx 0.37$. For gravity-driven CCM, the parameters of $l$ and $φ$ determine whether the melting rate is enhanced, reduced, or nearly unaffected. We construct a phase diagram based on the parameter matrix $(\log_{10} l, φ)$to delineate these three regimes. Lastly, we derived two asymptotic solutions for predicting the variation in time of the unmelted solid height.Open AccessClose-contact melting on hydrophobic textured surfaces: Confinement and meniscus effects
We investigate the dynamics of close-contact melting (CCM) on gas-trapped hydrophobic surfaces, with specific focus on the effects of geometrical confinement and the liquid-air meniscus below the liquid film. By employing dual-series and perturbation methods, we obtain numerical solutions for the effective slip lengths associated with velocity $λ$ and temperature $λ_t$ fields, across various values of aspect ratio $Λ$ (defined as the ratio of the film thickness $h$ to the structure's periodic length $l$) and gas-liquid fraction $φ$. Asymptotic solutions of $λ$ and $λ_t$ for $Λ\ll 1$ and $Λ\gg 1$ are derived and summarized for different surface structures, interface shapes and $Λ$, which reveal a different trend for $λ$ and $Λ\ll 1$ and the presence of a meniscus. In the context of constant-pressure CCM, our results indicate that transverse-grooves surfaces consistently reduced the heat transfer. However, longitudinal grooves can enhance heat transfer under the effects of confinement and meniscus when $Λ\lessapprox 0.1$ and $φ< 1 - 0.5^{2/3} \approx 0.37$. For gravity-driven CCM, the parameters of $l$ and $φ$ determine whether the melting rate is enhanced, reduced, or nearly unaffected. We construct a phase diagram based on the parameter matrix $(\log_{10} l, φ)$to delineate these three regimes. Lastly, we derived two asymptotic solutions for predicting the variation in time of the unmelted solid height. - 28 July 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 968, A9
Close-contact melting of shear-thinning fluids
This study aims at establishing a model for close-contact melting (CCM) of shear-thinning fluids. We presented a theoretical framework for predicting the variation of liquid melt film thickness and motion of unmelted solid for both Carreau and power-law fluids. We identified the appropriate energy equation considering the convective effect and derived an analytical temperature profile across the liquid film. Using the lubrication approximation, force equilibrium relationships and the corresponding numerical approaches were built. By using laser interferometry and photographic recording methods, we found excellent agreement between numerical solutions and experimental results for Carreau liquids, revealing that the convective effect weakens heat transfer and melting rate. We identified the critical liquid film thickness that determines three situations of CCM in the theoretical model for Carreau fluids. Numerical prediction demonstrated that the CCM of Carreau fluids can be almost equivalent to that of power-law fluids if the initial film thickness is greater than the critical value. Finally, approximate analytical models were developed for both Carreau and power-law models. For the applicability of the approximate analytical solutions, we derived two- and three-dimensional dimensionless phase diagrams of validity range and identified a key dimensionless group $(\varLambda Re)^{4/3}{Re}\left [3\ln (Ste+1)\right ]^{1/3}{Pe}^{-1/3}$ , where $\varLambda$ is dimensionless characteristic time, Re is Reynolds number, Ste is Stefan number and Pe is Peclect number. The reliability of the approximate solutions was verified by comparing with the numerical results. These approximate solutions enable convenient and low-cost computational prediction of the dynamic CCM process of shear-thinning fluids.- 28 July 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 968, A9
Close-contact melting of shear-thinning fluids
This study aims at establishing a model for close-contact melting (CCM) of shear-thinning fluids. We presented a theoretical framework for predicting the variation of liquid melt film thickness and motion of unmelted solid for both Carreau and power-law fluids. We identified the appropriate energy equation considering the convective effect and derived an analytical temperature profile across the liquid film. Using the lubrication approximation, force equilibrium relationships and the corresponding numerical approaches were built. By using laser interferometry and photographic recording methods, we found excellent agreement between numerical solutions and experimental results for Carreau liquids, revealing that the convective effect weakens heat transfer and melting rate. We identified the critical liquid film thickness that determines three situations of CCM in the theoretical model for Carreau fluids. Numerical prediction demonstrated that the CCM of Carreau fluids can be almost equivalent to that of power-law fluids if the initial film thickness is greater than the critical value. Finally, approximate analytical models were developed for both Carreau and power-law models. For the applicability of the approximate analytical solutions, we derived two- and three-dimensional dimensionless phase diagrams of validity range and identified a key dimensionless group $(\varLambda Re)^{4/3}{Re}\left [3\ln (Ste+1)\right ]^{1/3}{Pe}^{-1/3}$ , where $\varLambda$ is dimensionless characteristic time, Re is Reynolds number, Ste is Stefan number and Pe is Peclect number. The reliability of the approximate solutions was verified by comparing with the numerical results. These approximate solutions enable convenient and low-cost computational prediction of the dynamic CCM process of shear-thinning fluids.- Top Cited Papers
- 23 December 2022
- Published by Elsevier in Energy Storage Materials
- Vol. 55, 727-753
Nanocomposite phase change materials for high-performance thermal energy storage: A critical review
- 23 December 2022
- Published by Elsevier in Energy Storage Materials
- Vol. 55, 727-753
Top Cited PapersNanocomposite phase change materials for high-performance thermal energy storage: A critical review
- Open Access
- 16 September 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-12
Tackling realistic Li+ flux for high-energy lithium metal batteries
Electrolyte engineering advances Li metal batteries (LMBs) with high Coulombic efficiency (CE) by constructing LiF-rich solid electrolyte interphase (SEI). However, the low conductivity of LiF disturbs Li+ diffusion across SEI, thus inducing Li+ transfer-driven dendritic deposition. In this work, we establish a mechanistic model to decipher how the SEI affects Li plating in high-fluorine electrolytes. The presented theory depicts a linear correlation between the capacity loss and current density to identify the slope k (determined by Li+ mobility of SEI components) as an indicator for describing the homogeneity of Li+ flux across SEI, while the intercept dictates the maximum CE that electrolytes can achieve. This model inspires the design of an efficient electrolyte that generates dual-halide SEI to homogenize Li+ distribution and Li deposition. The model-driven protocol offers a promising energetic analysis to evaluate the compatibility of electrolytes to Li anode, thus guiding the design of promising electrolytes for LMBs.
- 16 September 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-12
Open AccessTackling realistic Li+ flux for high-energy lithium metal batteries
Electrolyte engineering advances Li metal batteries (LMBs) with high Coulombic efficiency (CE) by constructing LiF-rich solid electrolyte interphase (SEI). However, the low conductivity of LiF disturbs Li+ diffusion across SEI, thus inducing Li+ transfer-driven dendritic deposition. In this work, we establish a mechanistic model to decipher how the SEI affects Li plating in high-fluorine electrolytes. The presented theory depicts a linear correlation between the capacity loss and current density to identify the slope k (determined by Li+ mobility of SEI components) as an indicator for describing the homogeneity of Li+ flux across SEI, while the intercept dictates the maximum CE that electrolytes can achieve. This model inspires the design of an efficient electrolyte that generates dual-halide SEI to homogenize Li+ distribution and Li deposition. The model-driven protocol offers a promising energetic analysis to evaluate the compatibility of electrolytes to Li anode, thus guiding the design of promising electrolytes for LMBs.