RKRaihan Sayeed Khan

Raihan Sayeed Khan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Raihan Sayeed Khan has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Electronic transport in amorphous Ge2Sb2Te5 phase-change memory line cells and its response to photoexcitation

    by A. Talukder, M. Kashem, M. Hafiz, R. Khan, F. Dirisaglik, H. Silva, A. Gokirmak

    We electrically characterized melt-quenched amorphized Ge2Sb2Te5 (GST) phase-change memory cells of 20 nm thickness, ∼66–124 nm width, and ∼100–600 nm length with and without photoexcitation in the 80–275 K temperature range. The cells show distinctly different current–voltage characteristics in the low-field (≲19 MV/m), with a clear response to optical excitation by red light, and high-field (≳19 MV/m) regimes, with a very weak response to optical excitation. The reduction in carrier activation energy with photoexcitation in the low-field regime increases from ∼10 meV at 80 K to ∼50 meV at 150 K (highest sensitivity) and decreases again to 5 meV at 275 K. The heterojunctions at the amorphous–crystalline GST interfaces at the two sides of the amorphous region lead to formation of a potential well for holes and a potential barrier for electrons with activation energies in the order of 0.7 eV at room temperature. The alignment of the steady state energy bands suggests the formation of tunnel junctions at the interfaces for electrons and an overall electronic conduction by electrons. When photoexcited, the photo-generated holes are expected to be stored in the amorphous region, leading to positive charging of the amorphous region, reducing the barrier for electrons at the junctions and hence the device resistance in the low-field regime. Holes accumulated in the amorphous region are drained under a high electric field. Hence, the potential barrier cannot be modulated by photogenerated holes, and the photo-response is significantly reduced. These results support the electronic origin of resistance drift in amorphous GST.


  • Open Access

    Self-sustainable intermittent deep brain stimulator

    by Esraa Elsanadidy, Islam M. Mosa, Bowen Hou, Tobias Schmid, Maher F. El-Kady, Raihan Sayeed Khan, Andreas Haeberlin, Anastasios V. Tzingounis, James F. Rusling


  • Computational analysis of multi-contact phase change device for toggle logic operations

    by Raihan Sayeed Khan, Nadim H. Kan'AN, Jake Scoggin, Helena Silva, Ali Gokirmak

  • Open Access

    Artificial Intelligence-Based Techniques for Rainfall Estimation Integrating Multisource Precipitation Datasets

    by Raihan Sayeed Khan, Abul Ehsan Bhuiyan

    This study presents a comprehensive investigation of multiple Artificial Intelligence (AI) techniques—decision tree, random forest, gradient boosting, and neural network—to generate improved precipitation estimates over the Upper Blue Nile Basin. All the AI methods merged multiple satellite and atmospheric reanalysis precipitation datasets to generate error-corrected precipitation estimates. The accuracy of the model predictions was evaluated using 13 years (2000–2012) of ground-based precipitation data derived from local rain gauge networks in the Upper Blue Nile Basin region. The results indicate that merging multiple sources of precipitation substantially reduced the systematic and random error statistics in the Upper Blue Nile Basin. The proposed methods have great potential in predicting precipitation over the complex terrain region.


  • Reset Variability in Phase Change Memory for Hardware Security Applications

    by Nafisa Noor, Sadid Muneer, Raihan Sayeed Khan, Anna Gorbenko, L'HAcene Adnane, Tashfiq Bin Kashem, Jake Scoggin, Faruk Dirisaglik, Adam Cywar, Ali Gokirmak, et al.

    The rapid quench from melt associated with the reset operation in phase change memory is a suitable physical process to leverage programming variability for hardware security. We have experimentally characterized cell-to-cell programming variability in Ge2Sb2Te5 (GST) line cells using a single reset voltage pulse with moderate amplitude. We have observed that the cell dimensions and programming pulse parameters play a critical role on the programming variability. Cells with larger length-to-width ratios (L/W 1.8) show greater programming variability when moderate reset voltage amplitudes (Vappl) are applied. This variability is further increased with shorter pulse edges (tedge) of the applied pulses. We have performed a study for a reset-variability-based physical unclonable function (PUF) with 85 cells (with L/W = 4) by applying identical single pulses with shorter tedge and a pre-calibrated Vappl. Cells are randomly programmed to the full reset (high-resistance-state or HRS), or the partial reset or set (low-resistance-state or LRS) states with an equal probability and the two states are separated by ~1.5 order of magnitude. No bit flipping is observed after 9 months of programming and instead, the separation increases to ~3 orders of magnitude because of the upward and downward resistance drift of the HRS and LRS states. The underlying physical mechanisms behind the enhanced variability are identified as thermal runaway at the onset of GST melting and the additional current overshoot due to the parasitic capacitances, based on the results obtained from COMSOL finite element simulations and SPICE circuit modeling of the experimental setup.


  • Phase‐Change Logic via Thermal Cross‐Talk for Computation in Memory

    by Nadim Kanan, Raihan Sayeed Khan, Zachary Woods, Helena Silva, Ali Gokirmak

    Herein, logic function implementations are computationally demonstrated using lateral and vertical multicontact phase‐change devices integrated with complementary metal–oxide–semiconductor (CMOS) circuitry, which use thermal cross‐talk as a coupling mechanism to implement logic functions at smaller CMOS footprints. Thermal cross‐talk during the write operations is utilized to recrystallize the previously amorphized regions to achieve toggle operations. Amorphized regions formed between different pairs of write contacts are utilized to isolate read contacts. Typical expected reduction in CMOS footprint is ≈50% using the described approach for toggle‐multiplexing, JK‐multiplexing, and 2 × 2 routing. The switching speeds of the phase‐change devices are in the order of nanoseconds and are inherently nonvolatile. An electrothermal modeling framework with dynamic materials models is used to capture the device dynamics, and current and voltage requirements.


  • Enhancing Programming Variability in Multi-Bit Phase Change Memory Cells for Security

    by Nafisa Noor, Sadid Muneer, Raihan Sayeed Khan, Anna Gorbenko, Helena Silva

    We performed gradual programming of phase change memory (PCM) line cells with repeated pulses to transition from the crystalline to the amorphous state through various intermediate states and analyzed the variability in programming trends for different cell shapes and sizes. The crystalline PCM cells experienced sequences of repeated applied voltage pulses of either identical amplitudes or gradually increasing amplitudes. With repeated identical amplitude pulses, large number of pulses (~1,000) were required to reach a full reset of the cells through partial reset and partial set steps. With repeated increasing amplitude pulses, ~20-30 pulses were sufficient to fully reset the cells through gradual partial reset steps. Both programming approaches resulted in significant cell-to-cell variability for all cells, with stronger variability for narrower cells. However, the latter pulsing approach was more practical and resulted in more uniform distribution of all states. The stronger cell-to-cell programming variability for the narrower cells is attributed to the smaller number of crystalline grains in each cell and to the larger relative impact of manufacturing process variations. Statistical analysis of two example data sets shows promise of PCM programming variability for hardware security applications.


  • Open Access

    Resistance drift in Ge2Sb2Te5 phase change memory line cells at low temperatures and its response to photoexcitation

    by R. S. Khan, F. Dirisaglik, A. Gokirmak, H. Silva

    Resistance drift in amorphous Ge2Sb2Te5 is experimentally characterized in melt-quenched line cells in the range of 300 K to 125 K and is observed to follow the previously reported power-law behavior with drift coefficients in the range of 0.07 to 0.11 in the dark, linearly decreasing with 1/kT. While these drift coefficients measured in the dark are similar to commonly observed drift coefficients (∼0.1) at and above room temperature, measurements under light show a significantly lower drift coefficient (0.05 under illumination vs 0.09 in the dark at 150 K). Periodic on/off switching of light shows a sudden decrease/increase in resistance, attributed to photo-excited carriers, followed by a very slow response (∼30 min at 150 K) attributed to contribution of electron traps and slow trap-to-trap charge exchanges. A device-level electronic model is used to relate these experimental findings to gradual charging of electron traps in amorphous Ge2Sb2Te5, which gives rise to growth of a potential barrier for holes in time and, hence, resistance drift.


  • Open Access

    Advanced wind speed prediction using convective weather variables through machine learning application

    by Bhuiyan Md Abul Ehsan, Fatema Begum, Sheikh Jawad Ilham, Raihan Sayeed Khan


  • Open Access

    Intrinsically Reliable and Lightweight Physical Obfuscated Keys

    by Raihan Sayeed Khan, Nadim Kanan, Chenglu Jin, Jake Scoggin, Nafisa Noor, Sadid Muneer, Faruk Dirisaglik, Phuong Ha Nguyen, Helena Silva, Marten van Dijk, et al.

    Physical Obfuscated Keys (POKs) allow tamper-resistant storage of random keys based on physical disorder. The output bits of current POK designs need to be first corrected due to measurement noise and next de-correlated since the original output bits may not be i.i.d. (independent and identically distributed) and also public helper information for error correction necessarily correlates the corrected output bits.For this reason, current designs include an interface for error correction and/or output reinforcement, and privacy amplification for compressing the corrected output to a uniform random bit string. We propose two intrinsically reliable POK designs with only XOR circuitry for privacy amplification (without need for reliability enhancement) by exploiting variability of lithographic process and variability of granularity in phase change memory (PCM) materials. The two designs are demonstrated through experiments and simulations.