JWJinwu Wu

Jinwu Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinwu Wu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Gradient distributed absorber for efficient broadband absorption and hierarchical dissipation

    by Xun Yang, Jinwu Wu, Qibo Mao

    How to realize broadband sound absorption in microperforated plate (MPP) structure and reduce the thickness of the structure has been the focus of research. In this paper, a solution for broadband sound absorption and lightweight design of MPP is proposed. Based on the conventional MPP acoustic structure, the built-in double-layer and triple-layer gradient microperforated plates (DL-GMPP and TL-GMPP, collectively referred to as GMPP) were designed by gradient distribution of the multilayer MPP resonators. Compared to the conventional MPP acoustic structure, the configuration of gradient MPP resonators within the cavity facilitates the confinement of sound waves of different frequencies within discrete spatial domains. Thus, the spatial separation of different frequencies is realized. Furthermore, the structural parameters of TL-GMPP with different thicknesses were optimized through the application of the particle swarm optimization (PSO) algorithm. The results show that TL-GMPP is adequate to attain varying degrees of sound absorption, contingent on the total thickness of the structure. Finally, the experiments verified the accuracy of the theoretical model and the simulation prediction results. The results show that the absorption efficiencies of DL-GMPP and TL-GMPP with a thickness of 35 mm in the frequency range of 540–1600 Hz are greater than 73% and 80%, respectively, indicating superior broadband sound absorption performance.

  • Open Access

    Study on the Characteristics of a Composite Power System with a Tip-Jet-Driven Rotor

    by Yifei Wu, Yun Wang, Jinwu Wu, Jianxiang Tang

    Tip-jet helicopters operate by utilizing the reaction force generated by a high-speed tip jet, offering advantages such as a simplified and compact fuselage design and a reduction in empty weight by eliminating anti-torque balancing equipment. In tip-jet helicopter research, the composite power system is regarded as a crucial and bottleneck element. This study employs numerical simulations to comprehensively analyze the internal flow characteristics of the gas generator and tip-jet-driven rotor within the composite power system. Specifically, an in-depth investigation has been conducted on the influence laws of various parameters on the system characteristics. These parameters encompass the tip-jet-driven rotor speed, which takes on values of 50 rad/s, 80 rad/s, 100 rad/s, 120 rad/s, and 150 rad/s, the tip-jet-driven rotor length, measured at 1585 mm, 1785 mm, 1985 mm, 2185 mm, 2385 mm, 2585 mm, and 2785 mm, and the tip-jet-driven rotor nozzle area, which is specified by six values corresponding to multiples of the straight section area of the rotor’s internal channel, namely 0.25 times, 0.5 times, 0.75 times, 1 times, 1.25 times, and 1.5 times. The analysis of the obtained results indicates several significant relationships. Firstly, it is observed that the available moment exhibits a linear decrease as the tip-jet-driven rotor speed increases. Secondly, the maximum available moment is attained when the tip-jet-driven rotor length (L) satisfies the relationship L = Vr/2ω. Additionally, the maximum available power is achieved when the transport velocity of the tip-jet-driven rotor nozzle is precisely half of the relative velocity of the nozzle. Moreover, under the condition that the mass flow rate of the tip-jet-driven rotor nozzle remains constant, a positive correlation between the available moment and the reduction in the tip-jet-driven rotor nozzle area is noted.

  • Open Access

    Development on Light and Thin Broadband Sound Absorption Structure Based on Unequal-Cross-Section Microperforated Plate Series Connection

    by Xin Jv, Jinwu Wu, Qibo Mao, Qi Li, Tianhang Zhang

    The sound absorption structure of a microperforated plate has many advantages and has great potential in the field of noise control. In order to solve the problem of broadband sound absorption of microperforated plates, a series acoustic structure of microperforated plates of unequal cross-section was designed based on the traditional microperforated plate series acoustic structure. Compared with the traditional series structure, the sudden change of cross-section increases the sound energy dissipation and greatly improves the sound absorption performance. Through the analysis of its parameters, when the overall thickness of the structure is 20 mm, its sound absorption coefficient is above 0.5 in the frequency range of 1000–3450 Hz; there are three formants, and the sound absorption coefficients corresponding to the three formants reach 1. This study provides new ideas and methods for the design of broadband acoustic structures.


  • Development of a low-frequency broadband sound absorber based on a micro-perforated panel coupled with the Helmholtz resonator system

    by Qi Li, Jinwu Wu, Qibo Mao, Xin Jv, Minghao Chen

    In the field of vibration and noise reduction, micro-perforated panel (MPP) structures and Helmholtz resonators (HR) play crucial roles as common sound-absorbing elements. However, independently applied MPP and HR structures cannot provide sufficiently wide absorption bandwidths at low frequencies. To achieve low-frequency broadband sound absorption, this study proposes a novel low-frequency broadband sound absorption structure (EMH) based on MPP and HR with a thickness of 40 mm to achieve a subwavelength, efficient, and compact design. We establish theoretical models of MPP and HR coupled systems, systematically analyze the sound absorption performance of same-element and different-element coupled structures, and employ the particle swarm optimization (PSO) algorithm to obtain structural parameters for efficient coupled sound absorption. Furthermore, we compare the sound absorption performance of three optimized coupled structures (MPP-coupled (SM), HR-coupled (SH), and MPP and HR-coupled) from the perspective of the theoretical calculation of the sound absorption coefficient and finite element analysis of the sound absorption mechanism. Finally, samples fabricated using 3D printing technology are tested in an impedance tube. The results demonstrate that efficient coupled sound absorption of MPP and HR can be achieved through parameter optimization. SH and SM exhibit nearly perfect sound absorption in the frequency ranges of 323–495 Hz and 615–1600 Hz, respectively, whereas the effective absorption bandwidth of EMH can reach 1225 Hz in the range of 200–1600 Hz. EMH shows superior low-frequency broadband sound absorption performance with a lightweight and simple structure, which holds the potential for application in low-frequency noise control.


  • Optimization design and analysis of the broadband acoustic absorber of the microperforated panel with an interpolated straight tube

    by Qi Li, Jinwu Wu, Qibo Mao, Xin Jv, Minghao Chen

    The microperforated panel (MPP) structure is widely used in the field of noise reduction. The traditional MPP structure has a fixed absorption peak, and the optimized MPP structure has an improved absorption band, but the frequency range of the absorption is not ideal. For the design of broadband absorption in MPP structures, this paper presents a MPP acoustic absorber structure (N-MH) with an interpolated straight tube (IST) designed for superior broadband acoustic performance. The N-MH structure combines the advantages of the MPP and the embedded necked Helmholtz resonator, as well as having a sub-wavelength thickness of only 60 mm, which is only 1/14th of the wavelength at the first resonant frequency. The N-MH structure is optimized based on the particle swarm optimization (PSO) algorithm. In comparison to traditional microperforated panel structures, the N-MH structure exhibits a significantly broader sound absorption frequency band. Additionally, we thoroughly investigate the factors influencing the mid-low-frequency sound absorption performance of the N-MH structure. Through theoretical prediction, simulation analysis, and experimental testing, it is verified that the N-MH structure has excellent broadband sound absorption characteristics in the frequency interval of 0–2000 Hz, and the percentage of sound absorption bands with absorption coefficients exceeding 0.9 can reach 78.2%.