Lesego M. Mohlala
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lesego M. Mohlala has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Michael Oluwatosin Bodunrin
School of Chemical and Metallurgical Engineering, Faculty of Engineering and the Built Environment, University of the Witwatersrand, Johannesburg, South Africa
2 shared publications Peter A. Olubambi
University of Johannesburg, Johannesburg, South Africa
2 shared publicationsTien-Chien Jen
University of Johannesburg, Johannesburg, South Africa
2 shared publications- Adefunke Abosede Fabuyide
School of Chemical and Metallurgical Engineering, University of the Witwatersrand, Wits 2050, Johannesburg, South Africa
1 shared publication - Ayotunde A. Awosusi
Centre of Competence in Environmental Biotechnology, University of South Africa’s College of Agriculture and Environmental Studies, Cnr Pioneer and Christian De Wet Roads, Private Bag X6, Florida 1710, South Africa
1 shared publication - Blessing Ozah
Department of Metallurgical and Materials Engineering, Federal University of Technology Akure, PMB 704, Ondo State, Nigeria
1 shared publication
Latest Publications
- 13 April 2022
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 917, 170-181
Effect of Ni Doping and Vacancy Defects on the Sensing Characteristics of Graphene for NO2 and CO Detection: A DFT Study
The sensing characteristics of pristine, Ni-doped, and C-vacancy graphene towards CO and NO2 gas molecules were studied using density functional theory (DFT). The adsorption energies, electronic properties, charge transfer, and stable geometries were calculated to evaluate the gas-surface interaction mechanisms. Both pristine and vacancy graphene have smaller CO and NO2 adsorption energies and charge transfer than the Ni-doped graphene, whereas the adsorption energy on Ni-doped vacancy graphene is higher than that of Ni-doped graphene. The results indicate that both CO and NO2 gas molecules only attach to pristine graphene through weak physical adsorption. Stronger chemisorption occurs when the gas molecules adsorb on the surface of vacancy, Ni-doped, and Ni-doped vacancy graphene. Additionally, the results demonstrated that Ni-doped vacancy graphene has higher sensitivity and selectivity towards the NO2.
- 13 April 2022
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 917, 170-181
Effect of Ni Doping and Vacancy Defects on the Sensing Characteristics of Graphene for NO2 and CO Detection: A DFT Study
The sensing characteristics of pristine, Ni-doped, and C-vacancy graphene towards CO and NO2 gas molecules were studied using density functional theory (DFT). The adsorption energies, electronic properties, charge transfer, and stable geometries were calculated to evaluate the gas-surface interaction mechanisms. Both pristine and vacancy graphene have smaller CO and NO2 adsorption energies and charge transfer than the Ni-doped graphene, whereas the adsorption energy on Ni-doped vacancy graphene is higher than that of Ni-doped graphene. The results indicate that both CO and NO2 gas molecules only attach to pristine graphene through weak physical adsorption. Stronger chemisorption occurs when the gas molecules adsorb on the surface of vacancy, Ni-doped, and Ni-doped vacancy graphene. Additionally, the results demonstrated that Ni-doped vacancy graphene has higher sensitivity and selectivity towards the NO2.
- Open Access
- 23 November 2021
- Published by EDP Sciences in Manufacturing Review
- Vol. 8, 29
Welding of magnesium and its alloys: an overview of methods and process parameters and their effects on mechanical behaviour and structural integrity of the welds
An overview of welding methods and process parameters and its effects on mechanical behaviour and structural integrity of magnesium and its alloys are discussed. These alloys are less dense and beneficial structural alloys for improved energy efficiency, eco-friendliness and driver of circular economic model for sustainable design and innovative ecosystem. While the application of Mg-alloys is projected to increase, understanding the mechanical behaviour and structural integrity of welded joints are critical. Thus, fusion and solid-state welding processes of these alloys are discussed with emphasis on mechanical characterization. Laser welding is the most effective fusion welding technique for most Mg alloys whereas, the predominant solid-state method is friction stir welding. The importance of process variables such as heat inputs, welding velocity (speed) and post weld treatments on the microstructural evolution, on mechanical and physical properties of the distinct zones of the weld joints are described. The weldment is the most susceptible to failure due to phase transformation, defects such as microporosity and relatively coarse grain sizes after solidification. The implication of the design of quality weld joints of Mg alloys are explored with areas for future research directions briefly discussed.
- 23 November 2021
- Published by EDP Sciences in Manufacturing Review
- Vol. 8, 29
Open AccessWelding of magnesium and its alloys: an overview of methods and process parameters and their effects on mechanical behaviour and structural integrity of the welds
An overview of welding methods and process parameters and its effects on mechanical behaviour and structural integrity of magnesium and its alloys are discussed. These alloys are less dense and beneficial structural alloys for improved energy efficiency, eco-friendliness and driver of circular economic model for sustainable design and innovative ecosystem. While the application of Mg-alloys is projected to increase, understanding the mechanical behaviour and structural integrity of welded joints are critical. Thus, fusion and solid-state welding processes of these alloys are discussed with emphasis on mechanical characterization. Laser welding is the most effective fusion welding technique for most Mg alloys whereas, the predominant solid-state method is friction stir welding. The importance of process variables such as heat inputs, welding velocity (speed) and post weld treatments on the microstructural evolution, on mechanical and physical properties of the distinct zones of the weld joints are described. The weldment is the most susceptible to failure due to phase transformation, defects such as microporosity and relatively coarse grain sizes after solidification. The implication of the design of quality weld joints of Mg alloys are explored with areas for future research directions briefly discussed.
- 11 November 2019
- Published by ASME International
A First Principle Study on the Adhesion and Stability of Al203 (0001)/Pt (111) Film Interface
The first-principles calculation with density functional theory (DFT) is a powerful tool for studying solid-solid interfacial behaviour at the atomic scale. In this study, the interfacial properties of Al2O3 (0001)/Pt (111) atomic layer deposited film, such as adhesion strength, fracture toughness; interfacial energy and stability are investigated using the Cambridge Serial Total Energy Package (CASTEP) code in Material Studio. Two interface models with different Pt (111) configurations are investigated to elucidate their influence on the adhesion strength and interfacial stability. Moreover, the density of states plots (PDCS) is presented to further comprehend the electronic structures and bonding nature of interface. The work of adhesion obtained from the calculations is 2.836 J/m2 and 2.694 J/m2 for model 1 and 2 respectively. In addition, the interfacial energy for model 1 (−6.429J/m2) is smaller than that of model 2 (−5.881J/m2). The calculated results indicate that model 1 possesses high interface strength and thermodynamic stability. The lattice mismatch was calculated to be 10.46%, suggesting the formation of semi-coherent interface formation with coherent structural interface structures and misfit dislocation networks (MDN). The results obtained from the density functional theory simulations were compared and correlated with available literature.
- 11 November 2019
- Published by ASME International
A First Principle Study on the Adhesion and Stability of Al203 (0001)/Pt (111) Film Interface
The first-principles calculation with density functional theory (DFT) is a powerful tool for studying solid-solid interfacial behaviour at the atomic scale. In this study, the interfacial properties of Al2O3 (0001)/Pt (111) atomic layer deposited film, such as adhesion strength, fracture toughness; interfacial energy and stability are investigated using the Cambridge Serial Total Energy Package (CASTEP) code in Material Studio. Two interface models with different Pt (111) configurations are investigated to elucidate their influence on the adhesion strength and interfacial stability. Moreover, the density of states plots (PDCS) is presented to further comprehend the electronic structures and bonding nature of interface. The work of adhesion obtained from the calculations is 2.836 J/m2 and 2.694 J/m2 for model 1 and 2 respectively. In addition, the interfacial energy for model 1 (−6.429J/m2) is smaller than that of model 2 (−5.881J/m2). The calculated results indicate that model 1 possesses high interface strength and thermodynamic stability. The lattice mismatch was calculated to be 10.46%, suggesting the formation of semi-coherent interface formation with coherent structural interface structures and misfit dislocation networks (MDN). The results obtained from the density functional theory simulations were compared and correlated with available literature.
- Open Access
- 1 January 2019
- Published by Elsevier in Procedia Manufacturing
- Vol. 35, 1250-1255
Initial reaction mechanism on the atomic layer deposition of platinum on a graphene surface: A density functional theory study
- 1 January 2019
- Published by Elsevier in Procedia Manufacturing
- Vol. 35, 1250-1255
Open AccessInitial reaction mechanism on the atomic layer deposition of platinum on a graphene surface: A density functional theory study
- Open Access
- 1 September 2016
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 55 (3) , 3025-3036
Beneficiation of corncob and sugarcane bagasse for energy generation and materials development in Nigeria and South Africa: A short overview
- 1 September 2016
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 55 (3) , 3025-3036
Open AccessBeneficiation of corncob and sugarcane bagasse for energy generation and materials development in Nigeria and South Africa: A short overview