VMViktoria Maikher

Viktoria Maikher

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Viktoria Maikher has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Construction of mathematical models of heat exchange for digital devices with local near-surface and internal heating

    by Vasyl Havrysh, Svitlana Yatsyshyn, Viktoria Maikher, Oksana Hrytsai, Fedir Honchar

    This study investigates heat exchange processes for thermally sensitive media with local near-surface and internal heating. As a result of the thermal load, significant temperature gradients arise. To establish temperature regimes for effective operation of electronic devices, linear and nonlinear mathematical models for determining the temperature field have been constructed, which could allow further analysis of temperature regimes. Based on the stated linear and nonlinear boundary value problems of thermal conductivity, their analytical and numerical solutions have been derived. Using these solutions, numerical calculations of the temperature distribution in spatial coordinates for given geometric and thermophysical parameters have been performed. Reliability of the results has been confirmed by experimental findings and the determined numerical values of temperature distribution in the medium. For an effective description of local heating, the theory of generalized functions was used. A technique for linearizing nonlinear mathematical models has been introduced. As a result, linear second-order differential equations with partial derivatives and a singular right-hand side have been derived. The numerical results reflect the temperature distribution in the medium in spatial coordinates for the given geometric and thermophysical parameters. The number of divisions of the interval (0; x*) was chosen to be 9, which made it possible to derive numerical values of temperature with an accuracy of 10–6. The obtained numerical values of temperature for silicon under a linear temperature dependence of the thermal conductivity coefficient differ from the results obtained for its constant value by 2%.

  • Open Access

    Education 4.0: Development of the Ukrainian Education System in the Context of Artificial Intelligence and Information Technologies

    by Svitlana Kryshtanovych, Yuliia Bekh, Olga Stadnichenko, Zhanna Shevchenko, Viktoriia Maikher, Orysia Liubinska

    The rapid advancement of artificial intelligence (AI) and information technologies (IT) has significantly influenced global education systems, leading to the emergence of Education 4.0. This article explores the development of the Ukrainian education system within this context, focusing on the integration of AI and IT to enhance educational outcomes and foster sustainable regional development. Drawing on a comprehensive literature review and methodological analysis, the study identifies key stages of digital transformation, the role of AI in educational management, and the impact of modern digital technologies on the educational environment. The findings highlight the importance of methodological approaches to developing creative thinking, optimizing state regulation, and ensuring the safety and security of educational institutions. The article concludes with recommendations for further research and policy implementation to support the sustainable development of the Ukrainian education system in the era of Education 4.0.


  • Open Access

    Development of mathematical models of heat conductivity for modern electronic devices with elements containing foreign inclusions

    by Vasyl Havrysh, Elvira Dzhumelia, Oksana Hrytsai, Stepan Kachan, Viktoria Maikher

    This paper considers the heat conduction process for an isotropic medium containing a foreign half-through inclusion and heated by a locally concentrated heat flow. Linear and non-linear mathematical models for determining the temperature field have been built to establish the temperature regimes for the effective operation of electronic devices. The coefficient of thermal conductivity of a non-uniform structure is represented as a whole, using asymmetric unit functions, which automatically provides the conditions of ideal thermal contact on the surfaces of materials. This results in solving one heat conduction equation with discontinuous and singular coefficients. A linearizing function was introduced to linearize the nonlinear boundary value problem. Analytical-numerical solutions of linear and nonlinear boundary-value problems have been obtained in a closed form. A linear temperature dependence of the coefficient of thermal conductivity of structural materials was chosen for a heat-sensitive medium. As a result, an analytical-numerical solution was derived, which determines the temperature distribution in this medium. On this basis, a numerical experiment was performed, the results of which are graphically displayed and confirm the adequacy of the constructed mathematical models to a real physical process. The materials of the plate and inclusion are silicon and silver. The results for these materials based on the linear and non-linear model differ by 7 %. Their slight difference is explained by the fact that the values of the temperature coefficient of thermal conductivity are small. The models built make it possible to analyze the given environments in terms of their thermal resistance. As a result, it becomes possible to improve it, and protect structures from overheating, which could lead to the failure of individual nodes and their elements and the entire electronic device


  • Open Access

    Construction of mathematical models of thermal conductivity for modern electronic devices with elements of a layered structure

    by Vasyl Havrysh, Elvira Dzhumelia, Stepan Kachan, Viktoria Maikher, Ihor Rabiichuk

    This paper considers a heat conduction process for isotropic layered media with internal thermal heating. As a result of the heterogeneity of environments, significant temperature gradients arise as a result of the thermal load. In order to establish the temperature regimes for the effective operation of electronic devices, linear and non-linear mathematical models for determining the temperature field have been constructed, which would make it possible to further analyze the temperature regimes in these heat-active environments. The coefficient of thermal conductivity for the above structures was represented as a whole using asymmetric unit functions. As a result, the conditions of ideal thermal contact were automatically fulfilled on the surfaces of the conjugation of the layers. This leads to solving one heat conduction equation with discontinuous and singular coefficients and boundary conditions at the boundary surfaces of the medium. For linearization of nonlinear boundary value problems, linearizing functions were introduced. Analytical solutions to both linear and nonlinear boundary value problems were derived in a closed form. For heat-sensitive environments, as an example, the linear dependence of the coefficient of thermal conductivity of structural materials on temperature, which is often observed when solving many practical problems, was chosen. As a result, analytical relations for determining the temperature distribution in these environments were obtained. Based on this, a numerical experiment was performed, and it was geometrically represented depending on the spatial coordinates. This proves that the constructed linear and nonlinear mathematical models testify to their adequacy to the real physical process. They make it possible to analyze heat-active media regarding their thermal resistance. As a result, it becomes possible to increase it and protect it from overheating, which can cause the destruction of not only individual nodes and their elements but also the entire structure


  • Open Access

    Constructing mathematical models of thermal conductivity in individual elements and units of electronic devices at local heating considering thermosensitivity

    by Vasyl Havrysh, Elvira Dzhumelia, Stepan Kachan, Pavlo Serdyuk, Viktoria Maikher

    This paper considers a heat conduction process for an isotropic medium with local external and internal thermal heating. It was necessary to construct linear and non-linear mathematical models for determining the temperature field, and consequently, for the analysis of temperature regimes in these heat-active environments. To solve the linear boundary value problems and the resulting linearized boundary value problems with respect to the Kirchhoff transformation, the Henkel integral transformation method was used, as a result of which the analytical solutions to these problems were obtained. For a heat-sensitive environment, as an example, a linear dependence of the coefficient of thermal conductivity of the structural material of the structure on temperature, which is often used in many practical problems, was chosen. As a result, analytical relations for determining the temperature distribution in this environment were established. To determine the numerical values of the temperature and analyze the heat exchange processes in the given structure, caused by the external heat load, a geometric image of the temperature distribution was constructed depending on spatial coordinates. The resulting linear and non-linear mathematical models testify to their adequacy to the real physical process. They make it possible to analyze heat-active media regarding their thermal resistance. As a result, it becomes possible to increase it and protect it from overheating, which can cause the destruction of not only individual nodes and their elements but the entire structure as well


  • Open Access

    Температурне поле у пластині з локальним нагріванням

    by В. І. Гавриш, В. Ю. Майхер

    Розроблено математичні моделі аналізу температурних режимів у ізотропній пластині, яка нагрівається локально зосередженими джерелами тепла. Для цього теплоактивні зони пластини описано з використанням теорії узагальнених функцій. З огляду на це рівняння теплопровідності та крайові умови містять сингулярні праві частини. Для розв'язування крайових задач теплопровідності, що містять ці рівняння та крайові умови на межових поверхнях пластини, використано інтегральне перетворення Фур'є і внаслідок отримано аналітичні розв'язки задач у зображеннях. До цих розв'язків застосовано обернене інтегральне перетворення Фур'є, яке дало змогу отримати остаточні аналітичні розв'язки вихідних задач. Отримані аналітичні розв'язки подано у вигляді невласних збіжних інтегралів. За методом Ньютона (трьох восьмих) отримано числові значення цих інтегралів з певною точністю для заданих значень товщини пластини, просторових координат, питомої потужності джерел тепла, коефіцієнта теплопровідності конструкційного матеріалу пластини та ширини теплоактивної зони. Матеріалом пластини є кремній та германій. Для визначення числових значень температури в наведеній конструкції, а також аналізу теплообмінних процесів у середині пластини, зумовлених нагріванням локально зосередженими джерелами тепла, розроблено обчислювальні програми. Із використанням цих програм наведено графіки, що відображають поведінку кривих, побудованих із використанням числових значень розподілу температури залежно від просторових координат, коефіцієнта теплопровідності, питомої густини теплового потоку. Отримані числові значення температури свідчать про відповідність розроблених математичних моделей аналізу теплообмінних процесів у пластині з локально зосередженими джерелами тепла, реальному фізичному процесу. Програмні засоби також дають змогу аналізувати такого роду середовища, які піддаються локальному нагріванню, щодо їх термостійкості. Як наслідок, стає можливим її підвищити і захистити від перегрівання, яке може спричинити руйнування не тільки окремих елементів, а й усієї конструкції.


  • MATHEMATICAL MODEL OF HEAT EXCHANGE IN ELEMENTS OF DIGITAL DEVICES

    by Havrysh Havrysh, W. Yu.

    A mathematical model of heat exchange analysis between an isotropic two-layer plate heated ba point heat source concentrated on the conjugation surfaces of layers and the environment has been developed. To do this, using the theory of generalized functions, the coefficient of thermal conductivity of the materials of the plate layers is shown as a whole for the wholesystem.Given this, instead of two equations of thermal conductivity for each of the plate layers and the conditions of ideal thermal contact, one equation of thermal conductivity ingeneralized derivatives with singular coefficients is obtained between them. To solve the boundary value problem of thermal conductivity containing this equation and boundary conditions on the boundary surfaces of the plate, the integral Fourier transform was used and as a result an analytical solution of the problem in images was obtained. An inverse integral Fourier transform was applied to this solution, which made it possible to obtain the final analytical solution of the original problem. The obtained analytical solution is presented in the form of an improper convergent integral. According to Simpsons method, numerical values of this integral are obtained with a certain accuracy for given values of layer thickness, spatial coordinates, specific power of a point heat source, thermal conductivity of structural materials of the plate and heat transfer coefficient from the boundary surfaces of the plate. The material of the first layer of the plate is copper, and the second is aluminum. Computational programs have been developed to determine the numerical values of temperature in the given structure, as well as to analyze the heat exchange between the plate and the environment due to different temperature regimes due to heating the plate by a point heat source concentrated on the conjugation surfaces. Using these programs, graphs are shown that show the behavior of curves constructed using numerical values of the temperature distribution depending on the spatial coordinates. The obtained numerical values of temperature indicate the correspondence of the developed mathematical model of heat exchange analysis between a two-layer plate with a point heatsource focused on the conjugation surfaces of the layersand the environment, the real physical process.