Saurabh Parmar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Saurabh Parmar has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Bishakha Ray
Department of Applied Physics, Defence Institute of Advanced Technology (D.U.), Pune, India
6 shared publications - Suwarna Datar
Department of Applied Physics, Defence Institute of Advanced Technology, Pune, India
6 shared publications Suwarna Datar
Department of Applied Physics, Defence Institute of Advanced Technology, Pune 25, India
2 shared publicationsAbhijit Biswas
Department of Physics and Centre for Energy Science, Indian Institute of Science Education and Research Pune, Maharashtra 411008, India
1 shared publicationAshutosh Abhyankar
Department of Metallurgical and Material Engineering, Defence Institute of Advanced Technology 2 , Pune, Maharashtra 411025, India
1 shared publicationBishakha Ray
Defense Institute of Advanced Technology, Pune, Maharashtra 411025, India
1 shared publication
Latest Publications
- 12 January 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (2) , 023906
Magnetic force microscopy study of induced magnetism in graphene nanoribbons influenced by magnetic nanoparticles
Nanoscale analysis of magnetic properties of graphene nanoribbons (GNRs) conjugated with magnetic nanoparticles has been studied in this work. The effect of varying concentrations of and Ni nanoparticles on the magnetic domain structure of GNRs has been investigated using magnetic force microscopy (MFM). A variable external magnetic field was applied to the samples, and an evident variation in the domain structure with a change in the magnetic field was observed. It was found that magnetic properties and the imaged magnetic domain structure are influenced by the concentration of magnetic nanoparticles conjugated with GNRs. The vibrating sample magnetometry (VSM) studies support the nano-domain studies done using MFM such that the trend observed for the saturation magnetization obtained from vibrating sample magnetometry (VSM) matches that of the phase difference obtained using MFM.- 12 January 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (2) , 023906
Magnetic force microscopy study of induced magnetism in graphene nanoribbons influenced by magnetic nanoparticles
Nanoscale analysis of magnetic properties of graphene nanoribbons (GNRs) conjugated with magnetic nanoparticles has been studied in this work. The effect of varying concentrations of and Ni nanoparticles on the magnetic domain structure of GNRs has been investigated using magnetic force microscopy (MFM). A variable external magnetic field was applied to the samples, and an evident variation in the domain structure with a change in the magnetic field was observed. It was found that magnetic properties and the imaged magnetic domain structure are influenced by the concentration of magnetic nanoparticles conjugated with GNRs. The vibrating sample magnetometry (VSM) studies support the nano-domain studies done using MFM such that the trend observed for the saturation magnetization obtained from vibrating sample magnetometry (VSM) matches that of the phase difference obtained using MFM.- 28 July 2022
- Published by Taylor & Francis in Composite Interfaces
- Vol. 30 (3) , 301-321
Reduced graphene oxide(rGO)-Ferrite composite inks and their printed meta-structures as an adaptable EMI shielding material
Electromagnetic interference (EMI) shielding inks are generally conducting inks and therefore, are mostly reflection based. EMI shielding based on reflection are sometimes not suitable for certain applications apart from the fact that they themselves act as secondary source of EM waves. Here, we develop reduced graphene oxide (rGO)- zinc nickel ferrite (ZNF) and rGO-manganese (Mn)-doped zinc nickel ferrite inks for EM absorption in X-band, which have been tested in liquid state, coatings, and as printed meta-structures demonstrating versatile use of the inks. As a coating, the average EMI shielding of more than 30 dB is achieved in the 8 to 12 GHz range. The absorption properties of the rGO based ink can be increased from 50% to more than 80% by addition of a ferrite composite and can further be tuned by Mn doping. The dielectric measurement studies reveal that addition of Mn creates sites for interfacial polarization. The interfaces between polymer matrix, rGO, ZNF, and Mn contribute to conductivity, dipole and interfacial polarization losses, thereby augmenting absorption dominated EMI shielding. Cole-cole plot for the inks also indicates multiple relaxation processes confirming the role interfaces in absorption properties of the composite ink. Graphical abstract
- 28 July 2022
- Published by Taylor & Francis in Composite Interfaces
- Vol. 30 (3) , 301-321
Reduced graphene oxide(rGO)-Ferrite composite inks and their printed meta-structures as an adaptable EMI shielding material
Electromagnetic interference (EMI) shielding inks are generally conducting inks and therefore, are mostly reflection based. EMI shielding based on reflection are sometimes not suitable for certain applications apart from the fact that they themselves act as secondary source of EM waves. Here, we develop reduced graphene oxide (rGO)- zinc nickel ferrite (ZNF) and rGO-manganese (Mn)-doped zinc nickel ferrite inks for EM absorption in X-band, which have been tested in liquid state, coatings, and as printed meta-structures demonstrating versatile use of the inks. As a coating, the average EMI shielding of more than 30 dB is achieved in the 8 to 12 GHz range. The absorption properties of the rGO based ink can be increased from 50% to more than 80% by addition of a ferrite composite and can further be tuned by Mn doping. The dielectric measurement studies reveal that addition of Mn creates sites for interfacial polarization. The interfaces between polymer matrix, rGO, ZNF, and Mn contribute to conductivity, dipole and interfacial polarization losses, thereby augmenting absorption dominated EMI shielding. Cole-cole plot for the inks also indicates multiple relaxation processes confirming the role interfaces in absorption properties of the composite ink. Graphical abstract
- 1 December 2021
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 332
Detection of binary and ternary mixtures of volatile organic compounds using quartz tuning fork based sensor array
- 1 December 2021
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 332
Detection of binary and ternary mixtures of volatile organic compounds using quartz tuning fork based sensor array
- Open Access
- 19 May 2021
- Published by MDPI AG in Engineering Proceedings
- Vol. 6 (1) , 62
Polymer-Modified Quartz Tuning Forks for Breath Biomarker Sensing
The change in levels of volatile organic compounds (VOC) present in exhaled breath can be indicative of bodily disorders. Detection of such low levels of VOCs can allow early detection and diagnosis of diseases. A polymer- modified Quartz Tuning Fork (QTF) is a promising, cost-effective sensor that can detect a change in ppm levels of VOCs exhaled from the breath at room temperature. Acetone and acetaldehyde are biomarkers that are readily exhaled by human beings. Increased levels of these analytes can serve as indicators for toxicity or a wide array of diseases. The present work uses an array of QTFs modified separately using nanomaterials embedded in polystyrene to detect low VOC concentrations present in simulated human breath successfully. The sensor response shows a clear distinction between healthy human breath and breath spiked with varying VOC concentrations (5–400 ppm). The sensor response proves it can potentially serve as an economical and non-invasive tool for disease diagnostics.
- 19 May 2021
- Published by MDPI AG in Engineering Proceedings
- Vol. 6 (1) , 62
Open AccessPolymer-Modified Quartz Tuning Forks for Breath Biomarker Sensing
The change in levels of volatile organic compounds (VOC) present in exhaled breath can be indicative of bodily disorders. Detection of such low levels of VOCs can allow early detection and diagnosis of diseases. A polymer- modified Quartz Tuning Fork (QTF) is a promising, cost-effective sensor that can detect a change in ppm levels of VOCs exhaled from the breath at room temperature. Acetone and acetaldehyde are biomarkers that are readily exhaled by human beings. Increased levels of these analytes can serve as indicators for toxicity or a wide array of diseases. The present work uses an array of QTFs modified separately using nanomaterials embedded in polystyrene to detect low VOC concentrations present in simulated human breath successfully. The sensor response shows a clear distinction between healthy human breath and breath spiked with varying VOC concentrations (5–400 ppm). The sensor response proves it can potentially serve as an economical and non-invasive tool for disease diagnostics.
- 1 May 2020
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 20 (5) , 2847-2857
Co/Co3O4 Based Nanoparticles and Their Polymer Composites for Tuned Electromagnetic Interference Shielding Application
The magnetic properties of the metal nanoparticles (NPs) can play remarkable role in electromagnetic interference shielding (EMI Shielding) of many defence and commercial electronic devices. In the present work, coconut oil and PVA capped magnetic cobalt/cobalt oxide nanoparticles (Co/Co3O4 NPs) were synthesized by chemical reduction method and impregnated in polymer matrix to verify their EMI shielding behaviour. The coconut oil capped Co/Co3O4 NPs with presence of hcp and fcc phases were prepared in the size domain of 7–10 nm and the effect of surfactant (the oil) on size and oxidation state was studied by varying the ratios. The shielding efficiencies of Co/Co3O4 NPs PVA nanocomposites were analysed by using vector network analyser (VNA) in X- and Ku-band ranging from 8 GHz–18 GHz. The VNA results showed increased shielding efficiency with increasing concentration of NPs.
- 1 May 2020
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 20 (5) , 2847-2857
Co/Co3O4 Based Nanoparticles and Their Polymer Composites for Tuned Electromagnetic Interference Shielding Application
The magnetic properties of the metal nanoparticles (NPs) can play remarkable role in electromagnetic interference shielding (EMI Shielding) of many defence and commercial electronic devices. In the present work, coconut oil and PVA capped magnetic cobalt/cobalt oxide nanoparticles (Co/Co3O4 NPs) were synthesized by chemical reduction method and impregnated in polymer matrix to verify their EMI shielding behaviour. The coconut oil capped Co/Co3O4 NPs with presence of hcp and fcc phases were prepared in the size domain of 7–10 nm and the effect of surfactant (the oil) on size and oxidation state was studied by varying the ratios. The shielding efficiencies of Co/Co3O4 NPs PVA nanocomposites were analysed by using vector network analyser (VNA) in X- and Ku-band ranging from 8 GHz–18 GHz. The VNA results showed increased shielding efficiency with increasing concentration of NPs.
- 25 July 2019
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 3 (7) , 074007
Coexisting 1T/2H polymorphs, reentrant resistivity behavior, and charge distribution in 2D/2D composite thin filmsIn view of their immensely intriguing properties, two-dimensional (2D) materials are being intensely researched in search of novel phenomena and diverse application interests; however, studies on the realization of 2D/2D nanocomposites in the application-worthy thin-film platform are rare. Here we have grown -hexagonal boron nitride (hBN) 2D/2D composite thin films on different substrates by the pulsed laser deposition technique and made comparative studies with the pristine and hBN films. The Raman and x-ray photoelectron spectroscopy techniques as well as high-resolution transmission electron microscopy confirm the concomitant presence of both the 1T (conducting) and 2H (semiconducting) polymorphs of in the composite film. Interestingly, a peculiar reentrant semiconductor-metal-insulator transition is seen in the 2D/2D composite film which is absent in the film, and it correlates well with the signatures of phonon softening seen in temperature-dependent Raman spectroscopy. Furthermore, electrostatic force microscopy reveals the presence of three distinct regions (metallic, semiconducting, and insulating) in the composite film with differing contact potentials and enhanced propensity for charge transfer with respect to pristine . A triboelectric nanogenerator device containing biphasic composite film as an electron acceptor exhibits more than twofold (sixfold) enhancement in peak-to-peak output voltage as compared to the pristine (hBN) film. These observations bring out the potential of 2D/2D nanocomposite thin films for unfolding emergent phenomena and technological applications.- 25 July 2019
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 3 (7) , 074007
Coexisting 1T/2H polymorphs, reentrant resistivity behavior, and charge distribution in 2D/2D composite thin filmsIn view of their immensely intriguing properties, two-dimensional (2D) materials are being intensely researched in search of novel phenomena and diverse application interests; however, studies on the realization of 2D/2D nanocomposites in the application-worthy thin-film platform are rare. Here we have grown -hexagonal boron nitride (hBN) 2D/2D composite thin films on different substrates by the pulsed laser deposition technique and made comparative studies with the pristine and hBN films. The Raman and x-ray photoelectron spectroscopy techniques as well as high-resolution transmission electron microscopy confirm the concomitant presence of both the 1T (conducting) and 2H (semiconducting) polymorphs of in the composite film. Interestingly, a peculiar reentrant semiconductor-metal-insulator transition is seen in the 2D/2D composite film which is absent in the film, and it correlates well with the signatures of phonon softening seen in temperature-dependent Raman spectroscopy. Furthermore, electrostatic force microscopy reveals the presence of three distinct regions (metallic, semiconducting, and insulating) in the composite film with differing contact potentials and enhanced propensity for charge transfer with respect to pristine . A triboelectric nanogenerator device containing biphasic composite film as an electron acceptor exhibits more than twofold (sixfold) enhancement in peak-to-peak output voltage as compared to the pristine (hBN) film. These observations bring out the potential of 2D/2D nanocomposite thin films for unfolding emergent phenomena and technological applications.- 12 July 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 52 (37) , 375302
Modified graphene as a conducting ink for electromagnetic interference shielding
Research on electromagnetic interference (EMI) shielding materials has become very important as one looks for polymer composites as EMI shielding paints and coatings. EMI Shielding is mainly dependent on absorption and reflection losses, which in turn depend on conductivity, permittivity and permeability of the material. In the present work, we have tried to use the properties of graphene to improve EMI shielding and absorbing properties of the polymer composite. The work is focussed on two aspects of the materials; firstly, to developed an EMI shielding paint which can be used as coating and secondly, development of such paint which has absorption as the dominant mechanism of shielding. Reduced graphene oxide(rGO) has been conjugated with ferromagnetic nanostructures. Absorption of up to ∼12 dB for composite of rGO-Fe 3 O 4 and ∼18 dB for the composite of rGO-Ni was observed, which is more than 99% of the total radiation and hence, can be useful for commercial applications.
- 12 July 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 52 (37) , 375302
Modified graphene as a conducting ink for electromagnetic interference shielding
Research on electromagnetic interference (EMI) shielding materials has become very important as one looks for polymer composites as EMI shielding paints and coatings. EMI Shielding is mainly dependent on absorption and reflection losses, which in turn depend on conductivity, permittivity and permeability of the material. In the present work, we have tried to use the properties of graphene to improve EMI shielding and absorbing properties of the polymer composite. The work is focussed on two aspects of the materials; firstly, to developed an EMI shielding paint which can be used as coating and secondly, development of such paint which has absorption as the dominant mechanism of shielding. Reduced graphene oxide(rGO) has been conjugated with ferromagnetic nanostructures. Absorption of up to ∼12 dB for composite of rGO-Fe 3 O 4 and ∼18 dB for the composite of rGO-Ni was observed, which is more than 99% of the total radiation and hence, can be useful for commercial applications.