LDLenny Van Daele

Lenny Van Daele

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lenny Van Daele has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fabrication of hollow microneedles from photo-crosslinkable poly(ε-caprolactone-co-δ-valerolactone-co-D,L-lactide) via two-photon polymerization

    by Alexandra Cleyman, Bo Van Durme, Antonio Jaén-Ortega, Bart Bijleveld, Nele Pien, Lenny Van Daele, Joost Brancart, Vincent Van Rompaey, Phillip Blondeel, Sandra Van Vlierberghe

  • A Platform Material for Melt Electrowriting: Shape Memory Poly(Alkylene Terephthalate)s with Tunable Thermo‐Mechanical Properties

    by Lenny Van Daele, Johannes Braig, Joost Brancart, Sandra Van Vlierberghe, Tomasz Jungst, Peter Dubruel

    Melt electrowriting (MEW) is a state‐of‐the‐art additive manufacturing technique, often used in tissue engineering, that enables the high‐resolution production of constructs composed of accurately positioned and stacked microscale fibers. One major limitation is the small pool of processable polymers, limiting the obtainable material properties and therefore the ability to match the requirements of certain applications. In this work, poly(alkylene terephthalate)s (PATs) are introduced to the MEW field, and their potential is demonstrated. PATs are biocompatible and have adjustable material properties depending on their alkyl chain length, making them highly versatile and tunable. PATs with alkyl chain lengths of 5 to 12 are synthesized and characterized chemically, thermally, and mechanically. Melting points ranging from 98°C to 150°C and Young's moduli between 117.2 and 574.7 MPa are obtained, highlighting their diversity in material properties. All tested PATs are processable using the same parameters, only varying the applied voltage difference. Further optimization using PAT with an alkyl chain length of 7 enables fabrication of constructs with various architectures, which exhibit excellent shape memory behavior. With their broad range of thermal and mechanical properties and minimal process optimization requirements, PATs offer a promising material platform for a plethora of applications.


  • Open Access

    Light-Based 3D Printing of Polyesters: From Synthesis to Fabrication

    by Quinten Thijssen, Astrid Quaak, Bart Bijleveld, Bo Li, Lenny Van Daele, Andreas Heise, Sandra Van Vlierberghe

    Polyesters represent a versatile class of materials whose biodegradability, biocompatibility, mechanical tunability, and broad chemical design space have made them valuable across a wide range of application areas, including tissue engineering, biomedical engineering, sustainable manufacturing, and soft robotics. Light-based 3D printing has further expanded their potential by enabling precise spatial control across nano- to macroscales, supporting the fabrication of resorbable implants, drug-delivery systems, microneedle arrays, and stimuli-responsive materials. This review discusses the essential steps toward light-based 3D printing of polyesters from synthetic strategies for producing these materials to functionalization methods that render them suitable for light-based 3D printing. Particular attention is given to the synthetic origin of the polyester, the way photoreactive groups are introduced and organized within the network, and how the formulation of the resulting photoresin together govern the ultimate photoreactivity, degradation behavior, print resolution, and mechanical performance. Advantages and limitations of current photochemical approaches are discussed across different light-based 3D printing technologies. With continuing advancements in manufacturing, the field of light-based 3D printing of polyesters shows substantial promise, poised to redefine material design, and influence a broad range of future technologies.


  • Polymers for Biomedical Applications: the Quest for Treating Cardiovascular Diseases

    by Lenny Van Daele, Sandra Van Vlierberghe, Peter Dubruel

    Cardiovascular diseases are the leading causes of death worldwide. Current treatments using balloon angioplasty, stents, and bypass grafts still suffer from significant risks of restenosis and thrombosis. This review outlines key research areas where polymers are used in treatments for cardiovascular diseases, highlighting developments from the last decade. Designed to serve both experts and non‐experts in the field, it requires little prior knowledge of the subject. A description of the cardiovascular system, cardiovascular diseases, current treatments, and their limitations are first introduced. After providing a detailed overview of the basic and advanced requirements for new treatments, recent advances in key research fields where polymers are applied to achieve these goals are highlighted. While surface modifications aim to improve endothelialization and/or prevent neointimal proliferation, shape memory polymer stents are intended to reduce damage to the arterial wall upon expansion. Research has also focused on developing biodegradable polymer stents to avoid any remaining material in the artery after healing. Finally, various advanced processing methods enable the production of polymeric personalized stents. By addressing various research areas in a single review, the interplay among them is highlighted, demonstrating that their convergence is essential for optimizing treatments and improving human quality of life.


  • Open Access

    Cationic Polyelectrolyte Adsorption onto Anionic Nanoparticles Analyzed with Frequency‐Domain Scanning Fluorescence Correlation Spectroscopy

    by Lucas Oorlynck, Lenny Van Daele, Alina Myslovska, Sarah Goddaer, Sumit Sumit, Yera Ye. Ussembayev, Katrien Remaut, Iwan Moreels, Peter Dubruel, Filip Strubbe

    An improved small‐circle scanning fluorescence correlation spectroscopy (sFCS) technique is introduced by combining acousto‐optical laser scanning with fitting the autocorrelation function in the frequency domain. The technique is validated using both simulation and experimental data on various fluorescent nanoparticles, including polystyrene beads, CdSe/CdS quantum dots, and lipid nanoparticles. Then, the sFCS method is used to investigate the adsorption of in‐house synthesized poly(2‐guanidinoethyl methacrylate) (PGUMA) polymers on polystyrene beads as a model system for polymer‐coated particles in biomedical and gene delivery applications. Using the particle diffusion and illumination beam waist values obtained from our sFCS analysis, regions of polymer concentrations are identified where polymer‐particle complexes remain stable. An increase in hydrodynamic size is also observed with the molecular mass of the adsorbed polymer. Beyond quantifying polymer‐particle stability and hydrodynamic size, the sFCS technique offers the advantage of not requiring a time‐consuming calibration step for the measurement volume, unlike standard FCS.


  • 3D‐Printed Shape Memory Poly(alkylene terephthalate) Scaffolds as Cardiovascular Stents Revealing Enhanced Endothelialization

    by Lenny Van Daele, Victor Chausse, Laurens Parmentier, Joost Brancart, Marta Pegueroles, Sandra Van Vlierberghe, Peter Dubruel

    Cardiovascular diseases are the leading cause of death and current treatments such as stents still suffer from disadvantages. Balloon expansion causes damage to the arterial wall and limited and delayed endothelialization gives rise to restenosis and thrombosis. New more performing materials that circumvent these disadvantages are required to improve the success rate of interventions. To this end, the use of a novel polymer, poly(hexamethylene terephthalate), is investigated for this application. The synthesis to obtain polymers with high molar masses up to 126.5 kg mol−1 is optimized and a thorough chemical and thermal analysis is performed. The polymers are 3D‐printed into personalized cardiovascular stents using the state‐of‐the‐art solvent‐cast direct‐writing technique, the potential of these stents to expand using their shape memory behavior is established, and it is shown that the stents are more resistant to compression than the poly(l‐lactide) benchmark. Furthermore, the polymer's hydrolytic stability is demonstrated in an accelerated degradation study of 6 months. Finally, the stents are subjected to an in vitro biological evaluation, revealing that the polymer is non‐hemolytic and supports significant endothelialization after only 7 days, demonstrating the enormous potential of these polymers to serve cardiovascular applications.


  • Effect of molar mass and alkyl chain length on the surface properties and biocompatibility of poly(alkylene terephthalate)s for potential cardiovascular applications

    by Lenny Van Daele, Babs Van de Voorde, Robin Colenbier, Lobke De Vos, Laurens Parmentier, Louis Van der Meeren, André Skirtach, Ruslan I. Dmitriev, Peter Dubruel, Sandra Van Vlierberghe

    A series of poly(alkylene terephthalate)s was synthesized and the effect of the polymer molar mass and alkyl chain length on the surface properties of spin-coated films was investigated, as well as the endothelial cell adhesion and proliferation.


  • Single‐particle electrophoresis for studying the adsorption of cationic polymers onto anionic particles

    by Íngrid Amer Cid, Lenny Van Daele, Peter Dubruel, Kristiaan Neyts, Filip Strubbe

    Understanding the adsorption of polymers onto particles is crucial for many technological and biomedical applications. Even though polymer adsorption on particles is a dynamic process, most experimental techniques can only study the adsorption indirectly, in equilibrium and on the ensemble level. New analysis methods are required to overcome these limitations. We investigated the use of single‐particle electrophoresis to study the adsorption kinetics of cationic polymers onto anionic particles and compared the resulting data to a theoretical model. In this approach, the electrophoretic mobility of single polystyrene (PS) particles, exposed to different concentrations of poly(2‐guanidinoethyl methacrylate), was measured as a function of time. The polymer adsorption leads to an electrophoretic mobility change of the PS particle over time, from the initial negative value to a positive value at equilibrium. By fitting the kinetics data to the Langmuir model, the adsorption rate, desorption rate and equilibrium constant were determined. Finally, the adsorption kinetics of several other polymers was investigated. This showed that the presented technique enables direct analysis and comparison of the kinetics of polymer adsorption on the single‐particle level.


  • Open Access

    Microwave-assisted synthesis of nanoscale VO2 structures

    by Matthias Van Zele, Hannes Rijckaert, Laura Van Bossele, Davy Deduytsche, Lenny Van Daele, Emile Drijvers, Christophe Detavernier, Isabel Van Driessche, Klaartje De Buysser