SCSitangshu Chatterjee

Sitangshu Chatterjee

*This is an algorithmically generated author record based on publicly available information.

Sitangshu Chatterjee has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Decoding roughness perception in distributed haptic devices

    by Sitangshu Chatterjee, Sylvia Tan, Changhyun Choi, Aditya Kuchibhotla, Guangchao Wan, Michael A Peshkin, J Edward Colgate, M Cynthia Hipwell

    The ability to render realistic texture perception using haptic devices has been consistently challenging. A key component of texture perception is roughness. When we touch surfaces, mechanoreceptors present under the skin are activated and the information is processed by the nervous system, enabling perception of roughness/smoothness. Several distributed haptic devices capable of producing localized skin stretch have been developed with the aim of rendering realistic roughness perception; however, current state-of-the-art devices rely on device fabrication and psychophysical experimentation to determine whether a device configuration will perform as desired. Predictive models can elucidate physical mechanisms, providing insight and a more effective design iteration process. Since existing models (1, 2) are derived from responses to normal stimuli only, they cannot predict the performance of laterally actuated devices which rely on frictional shear forces to produce localized skin stretch. They are also unable to predict the augmentation of roughness perception when the actuators are spatially dispersed across the contact patch or actuated with a relative phase difference (3). In this study, we have developed a model that can predict the perceived roughness for arbitrary external stimuli and validated it against psychophysical experimental results from different haptic devices reported in the literature. The model elucidates two key mechanisms: (i) the variation in the change of strain across the contact patch can predict roughness perception with strong correlation and (ii) the inclusion of lateral shear forces is essential to correctly predict roughness perception. Using the model can accelerate device optimization by obviating the reliance on trial-and-error approaches.


  • Open Access

    High‐Performance and High Bandwidth Electroadhesive Clutch Enabled by Fracture Mechanics and a Dielectric Nanoparticle‐Based High‐k Composite

    by Changhyun Choi, Sophia Gardner, Sitangshu Chatterjee, Aditya Kuchibhotla, Guangchao Wan, M. Cynthia Hipwell

    Clutches are integral components in robotic systems, enabling programming of system stiffness and precise control over a wide range of motion types. While different types of clutches exist, electroadhesive (EA) clutches present several key advantages, such as flexibility, low mass, low power consumption, simplicity, and fast response. Achieving high EA stress in EA clutches has remained a challenge, however, necessitating high voltage input or a large contact area to achieve the desired force. In this work, an EA clutch is proposed with a high EA stress achieved by taking fracture mechanics into account and using a high dielectric composite layer while still maintaining a comparable high switching speed to other dielectric‐based EA clutches. The maximum EA stress is observed to be 108.8 N cm −2 , which is four times larger than what has been reported previously among dielectric‐based EA clutches at room temperature. This high EA stress clutch can facilitate miniaturization and lower the operating voltage as well as extend to high load capacity applications. The proposed approach holds promise for advancements in various domains, including haptics (both kinesthetic and cutaneous), exoskeletons, walking robots, and other systems that require compliance, low mass, and precise force control.


  • Open Access

    Preferential Contamination in Electroadhesive Touchscreens: Mechanisms, Multiphysics Model, and Solutions

    by Sitangshu Chatterjee, Yuan Ma, Adit Sanghani, Mondher Cherif, J. Edward Colgate, M. Cynthia Hipwell

    Electroadhesive surface haptic touchscreens can help augment user experiences by providing tactile effects. The electrode layout in current commercialized designs has separated electrodes for the sensing and actuating functions. During regular use, it is observed that fingerprint residue preferentially deposits on the actuating electrodes far more than the sensing electrodes, which makes the underlying electrode pattern apparent and is highly undesirable for touchscreen users. To address this issue, various physical phenomena (electrohydrodynamic deformation, capillary bridge stabilization, electrowetting, and electrophoretic deposition) are investigated to understand the mechanism. Through experimentation, multiphysics modeling, and surface characterization, it is found that the root cause can be attributed to two mechanisms occurring in the actuating regions: 1) electrohydrodynamic deformation of sebum droplets attached to the finger valleys leading to the formation of additional capillary bridges and residual droplets on the screen surface after their rupture, and 2) electric field‐induced stabilization of sebum capillary bridges existing between the finger ridges and the screen, leading to the coalescence and formation of larger‐sized droplets. The developed model can then be used to address the issue during the screen design process. An example of using the model to explore the impact of changes in screen oleophobicity is shown.


  • Surface haptic rendering of virtual shapes through change in surface temperature

    by Changhyun Choi, Yuan Ma, Xinyi Li, Sitangshu Chatterjee, Sneha Sequeira, Rebecca F. Friesen, Jonathan R. Felts, M. Cynthia Hipwell

    Compared to relatively mature audio and video human-machine interfaces, providing accurate and immersive touch sensation remains a challenge owing to the substantial mechanical and neurophysical complexity of touch. Touch sensations during relative lateral motion between a skin-screen interface are largely dictated by interfacial friction, so controlling interfacial friction has the potential for realistic mimicry of surface texture, shape, and material composition. In this work, we show a large modulation of finger friction by locally changing surface temperature. Experiments showed that finger friction can be increased by ~50% with a surface temperature increase from 23° to 42°C, which was attributed to the temperature dependence of the viscoelasticity and the moisture level of human skin. Rendering virtual features, including zoning and bump(s), without thermal perception was further demonstrated with surface temperature modulation. This method of modulating finger friction has potential applications in gaming, virtual and augmented reality, and touchscreen human-machine interaction.


  • Nanotexture Shape and Surface Energy Impact on Electroadhesive Human–Machine Interface Performance

    by Xinyi Li, Yuan Ma, Changhyun Choi, Xuezhi Ma, Sitangshu Chatterjee, Shoufeng Lan, M. Cynthia Hipwell

    With the ubiquity of touch screens and the commercialization of electroadhesion‐based surface haptic devices, modeling tools that capture the multiphysical phenomena within the finger–device interface and their interaction are critical to design devices that achieve higher performance and reliability at lower cost. While electroadhesion has successfully demonstrated the capability to change tactile perception through friction modulation, the mechanism of electroadhesion in the finger–device interface is still unclear, partly due to the complex interfacial physics including contact deformation, capillary formation, electric field, and their complicated coupling effects that have not been addressed comprehensively. A multiphysics model is presented here to predict the friction force for finger–surface tactile interactions at the nanoscale. The nanoscopic multiphysical phenomena are coupled to study the impacts of nanotexture and surface energy in the touch interface. With macroscopic friction force measurements as verification, the model is further used to propose textures that have maximum electroadhesion effect and minimum sensitivity to relative humidity and user perspiration rate. This model can guide the performance improvement of future electroadhesion‐based surface haptic devices and other touch‐based human–machine interfaces.