Dmytro Serhiichuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Dmytro Serhiichuk has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- David Aili
Department of Energy Conversion and Storage, Technical University of Denmark, Elektrovej, Building 375, 2800 Lyngby, Denmark
10 shared publications - Mikkel Rykær Kraglund
Technical University of Denmark (DTU)
8 shared publications - Jens Oluf Jensen
Department of Energy Conversion and Storage, Technical University of Denmark, Lyngby, Denmark
7 shared publications Yifan Xia
Department of Energy Conversion and Storage, Technical University of Denmark, Elektrovej, Building 375, Lyngby, 2800, Denmark
6 shared publications- Sinu Charamchirail Rajappan
Technical University of Denmark
5 shared publications - Dirk Henkensmeier
Center for Hydrogen and Fuel Cells, Korea Institute of Science and Technology (KIST), Seoul, Republic of Korea
3 shared publications
Latest Publications
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (40) , 1930
Local pH Detection and Transport Properties in Ionomers for AEM Water Electrolysis
The use of ion-exchange polymers in energy conversion devices has become a commodity; however, advanced morphological and electrochemical characterization techniques are essential for the continued development of emerging materials. For instance, a deep understanding of the ionomer-infused catalyst network of anion exchange membrane water electrolysers (AEMWEs), where the interplay of ion, water, and gas transport is critical for optimizing performance and longevity in green hydrogen production. During operation, the concentration profile close to the electrode surface provides valuable insights into mass transport and reaction dynamics. Interfacial in-situ mapping using pH-sensitive fluorescent probes embedded in ion-conducting polymers—via nano-encapsulation, blending, or direct incorporation during polymerization—could elucidate the ionomer’s role in near-neutral to strongly alkaline local pH conditions in AEMWEs. In this work, we utilize pH-sensitive coumarin-based model compounds (benzo-α-pyrones and benzo-γ-pyrones) with high fluorescence quantum yield and exceptional photostability. Tailored substitutions on the coumarin core enable precise tuning of the working pH range, yielding alkali-stable, pH-reactive fluorescent probes. These probes could facilitate visualization and mapping of local pH variations using spatially resolved fluorescence microscopy. Furthermore, the morphology and distribution of ionomers within AEMWE electrodes are governed by polymer chemical structure, solvation behaviour, and particle size. To investigate these factors, we employ small-angle X-ray scattering (SAXS) under parameter-controlled conditions. By varying relative humidity and temperature on top of the wet/dry/electrolyte conditioning, we gain a deeper understanding of catalyst/ionomer network evolution, particularly in response to dimensional swelling during AEMWE operation.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (40) , 1930
Local pH Detection and Transport Properties in Ionomers for AEM Water Electrolysis
The use of ion-exchange polymers in energy conversion devices has become a commodity; however, advanced morphological and electrochemical characterization techniques are essential for the continued development of emerging materials. For instance, a deep understanding of the ionomer-infused catalyst network of anion exchange membrane water electrolysers (AEMWEs), where the interplay of ion, water, and gas transport is critical for optimizing performance and longevity in green hydrogen production. During operation, the concentration profile close to the electrode surface provides valuable insights into mass transport and reaction dynamics. Interfacial in-situ mapping using pH-sensitive fluorescent probes embedded in ion-conducting polymers—via nano-encapsulation, blending, or direct incorporation during polymerization—could elucidate the ionomer’s role in near-neutral to strongly alkaline local pH conditions in AEMWEs. In this work, we utilize pH-sensitive coumarin-based model compounds (benzo-α-pyrones and benzo-γ-pyrones) with high fluorescence quantum yield and exceptional photostability. Tailored substitutions on the coumarin core enable precise tuning of the working pH range, yielding alkali-stable, pH-reactive fluorescent probes. These probes could facilitate visualization and mapping of local pH variations using spatially resolved fluorescence microscopy. Furthermore, the morphology and distribution of ionomers within AEMWE electrodes are governed by polymer chemical structure, solvation behaviour, and particle size. To investigate these factors, we employ small-angle X-ray scattering (SAXS) under parameter-controlled conditions. By varying relative humidity and temperature on top of the wet/dry/electrolyte conditioning, we gain a deeper understanding of catalyst/ionomer network evolution, particularly in response to dimensional swelling during AEMWE operation.
- 25 November 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (47) , 32697-32702
Tetrazole functionalization: a new strategy toward stable alkaline ion-solvating polymer electrolytes
Tetrazole functionalization is described as a new strategy toward synthesis of stable and high-performing quaternary ammonium-free alkaline ion-solvating membranes for alkaline water electrolysis.
- 25 November 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (47) , 32697-32702
Tetrazole functionalization: a new strategy toward stable alkaline ion-solvating polymer electrolytes
Tetrazole functionalization is described as a new strategy toward synthesis of stable and high-performing quaternary ammonium-free alkaline ion-solvating membranes for alkaline water electrolysis.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (43) , 2870
Tuning the Hydrophilicity of Polymers for Ion-Solvating Membranes for Alkaline Electrolysis
Ion-solvating membranes constitute an alternative to both porous diaphragms and anion-exchange membranes for alkaline electrolysis. [1,2] The underlying principle is to imbibe a nonporous hydrophilic membrane with concentrated aqueous KOH and thus obtain high ionic conductivity from the sorbed electrolyte. It is well-established that high ionic conductivity can be reached, [3] and the main challenge is to identify or develop polymers with the right affinity for aqueous KOH and with long-term stability in the aggressive environment. Polymers known for their alkaline stability are generally hydrophobic and will not take up KOH. One strategy to promote and control the KOH uptake is to tune the polymer hydrophilicity to the extent that enough KOH is sorbed without dissolving the polymer. [4] The paper presents recent progress with hydrophilicity adjustment of polymers by hydrophilic functionalities. Hydrophilic tetrazole moieties are particularly stable in the alkaline environment due to deprotonation at high pH and the resulting formation of a negative charge that repels the aggressive hydroxide ions. See Figure 1. It is easy to adhere to the backbone by a click reaction. Chemical stability screening, electrolyte uptake, ion conductivity, and initial electrolyzer tests are presented. - References [1] D. Aili, M. R. Kraglund, S. C. Rajappan, D. Serhiichuk, Y. Xia, V. Deimede, J. Kallitsis, C. Bae, P. Jannasch, D. Henkensmeier and J. O. Jensen. Electrode Separators for the Next-Generation Alkaline Water Electrolyzers. ACS Energy Lett. 8 1900-1910 (2023). DOI: 10.1021/acsenergylett.3c00185 [2] D. Henkensmeier, W. Cho, P. Jannasch, J. Stojadinovic, Q. Li, D. Aili and J. O. Jensen. Separators and membranes for advanced alkaline water electrolysis. In press, Chemical Reviews. DOI: 10.1021/acs.chemrev.3c00694 [3] M. R. Kraglund, M. Carmo, G. Schiller, S. A. Ansar, D. Aili, E. Christensen and J. O. Jensen. Ion-solvating membranes as a new approach towards high rate alkaline electrolyzers. Energy Environ. Sci. 12, 3313 – 3318 (2019). DOI: 10.1039/c9ee00832b [4] D. Serhiichuk, S. Rajappan, Y. Krishnan, Y. Xia, M. R. Kraglund, H. A. Hansen, J. O. Jensen and D. Aili. Tetrazole functionalization: A new strategy toward stable ion-solvating polymer electrolytes for alkaline water electrolysis. Submitted. DOI: 10.26434/chemrxiv-2024-29p7m - Figure 1. Tetrazole functionalization of poly(styrene-co-acrylonitrile) (SAN) followed by formation of the corresponding potassium tetrazolide. [4] Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (43) , 2870
Tuning the Hydrophilicity of Polymers for Ion-Solvating Membranes for Alkaline Electrolysis
Ion-solvating membranes constitute an alternative to both porous diaphragms and anion-exchange membranes for alkaline electrolysis. [1,2] The underlying principle is to imbibe a nonporous hydrophilic membrane with concentrated aqueous KOH and thus obtain high ionic conductivity from the sorbed electrolyte. It is well-established that high ionic conductivity can be reached, [3] and the main challenge is to identify or develop polymers with the right affinity for aqueous KOH and with long-term stability in the aggressive environment. Polymers known for their alkaline stability are generally hydrophobic and will not take up KOH. One strategy to promote and control the KOH uptake is to tune the polymer hydrophilicity to the extent that enough KOH is sorbed without dissolving the polymer. [4] The paper presents recent progress with hydrophilicity adjustment of polymers by hydrophilic functionalities. Hydrophilic tetrazole moieties are particularly stable in the alkaline environment due to deprotonation at high pH and the resulting formation of a negative charge that repels the aggressive hydroxide ions. See Figure 1. It is easy to adhere to the backbone by a click reaction. Chemical stability screening, electrolyte uptake, ion conductivity, and initial electrolyzer tests are presented. - References [1] D. Aili, M. R. Kraglund, S. C. Rajappan, D. Serhiichuk, Y. Xia, V. Deimede, J. Kallitsis, C. Bae, P. Jannasch, D. Henkensmeier and J. O. Jensen. Electrode Separators for the Next-Generation Alkaline Water Electrolyzers. ACS Energy Lett. 8 1900-1910 (2023). DOI: 10.1021/acsenergylett.3c00185 [2] D. Henkensmeier, W. Cho, P. Jannasch, J. Stojadinovic, Q. Li, D. Aili and J. O. Jensen. Separators and membranes for advanced alkaline water electrolysis. In press, Chemical Reviews. DOI: 10.1021/acs.chemrev.3c00694 [3] M. R. Kraglund, M. Carmo, G. Schiller, S. A. Ansar, D. Aili, E. Christensen and J. O. Jensen. Ion-solvating membranes as a new approach towards high rate alkaline electrolyzers. Energy Environ. Sci. 12, 3313 – 3318 (2019). DOI: 10.1039/c9ee00832b [4] D. Serhiichuk, S. Rajappan, Y. Krishnan, Y. Xia, M. R. Kraglund, H. A. Hansen, J. O. Jensen and D. Aili. Tetrazole functionalization: A new strategy toward stable ion-solvating polymer electrolytes for alkaline water electrolysis. Submitted. DOI: 10.26434/chemrxiv-2024-29p7m - Figure 1. Tetrazole functionalization of poly(styrene-co-acrylonitrile) (SAN) followed by formation of the corresponding potassium tetrazolide. [4] Figure 1
- 16 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (43) , 58637-58647
Bipolar Membranes Via Divergent Synthesis: On the Interplay between Ion Exchange Capacity and Water Dissociation Catalysis
Bipolar membranes (BPMs) enable the operation of electrochemical reactors with electrode compartments in different chemical environments or pH. The transport properties at the microscopic scale are dictated by the composition and morphology of the interfacial junctions as well as the specific chemistry of the ion-exchange layers that support the current of protons and hydroxide ions. This work elucidates the relation between water-dissociation efficiency and the physicochemical properties of the individual ion-exchange membrane layers in the poly(styrene-b-poly(ethylene-ran-butylene)-b-polystyrene) (SEBS)-based BPM. The optimal water dissociation performance of three previously reported water-dissociation catalysts in the SEBS-based BPM was examined, with junction thickness of graphene oxide > TiO2 > SnO2, resulting in disparate junction morphologies at the BPM's interface. A hybrid junction system, which included both the effective water dissociation catalyst SnO2 and direct contacting of the ion-exchange membrane layer, exhibited high water dissociation efficiency. This was likely due to the immediate ion transport pathway provided by direct membrane contact around the catalyst, which also improved the interfacial adhesion. A higher ion exchange capacity (IEC) in BPMs substantially enhanced the water dissociation performance in BPMs without water-dissociation catalysts. However, the incorporation of the effective SnO2 catalyst into the BPMs with a lower IEC significantly improved performance, an effect attributed to the hybrid junction system. Additionally, the increase in water uptake and ion conductivity of the cation exchange layer with higher IEC suggested that the cation exchange layer and its interface to the water-dissociation catalyst layer may play a key role in water dissociation. This study identifies the key parameters of individual BPM components and their interactions to water dissociation performance, offering new insights to guide in the construction of future BPMs optimized for enhanced water dissociation efficiency at high current densities.
- 16 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (43) , 58637-58647
Bipolar Membranes Via Divergent Synthesis: On the Interplay between Ion Exchange Capacity and Water Dissociation Catalysis
Bipolar membranes (BPMs) enable the operation of electrochemical reactors with electrode compartments in different chemical environments or pH. The transport properties at the microscopic scale are dictated by the composition and morphology of the interfacial junctions as well as the specific chemistry of the ion-exchange layers that support the current of protons and hydroxide ions. This work elucidates the relation between water-dissociation efficiency and the physicochemical properties of the individual ion-exchange membrane layers in the poly(styrene-b-poly(ethylene-ran-butylene)-b-polystyrene) (SEBS)-based BPM. The optimal water dissociation performance of three previously reported water-dissociation catalysts in the SEBS-based BPM was examined, with junction thickness of graphene oxide > TiO2 > SnO2, resulting in disparate junction morphologies at the BPM's interface. A hybrid junction system, which included both the effective water dissociation catalyst SnO2 and direct contacting of the ion-exchange membrane layer, exhibited high water dissociation efficiency. This was likely due to the immediate ion transport pathway provided by direct membrane contact around the catalyst, which also improved the interfacial adhesion. A higher ion exchange capacity (IEC) in BPMs substantially enhanced the water dissociation performance in BPMs without water-dissociation catalysts. However, the incorporation of the effective SnO2 catalyst into the BPMs with a lower IEC significantly improved performance, an effect attributed to the hybrid junction system. Additionally, the increase in water uptake and ion conductivity of the cation exchange layer with higher IEC suggested that the cation exchange layer and its interface to the water-dissociation catalyst layer may play a key role in water dissociation. This study identifies the key parameters of individual BPM components and their interactions to water dissociation performance, offering new insights to guide in the construction of future BPMs optimized for enhanced water dissociation efficiency at high current densities.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (34) , 1759
PFAS-Free: Robust and Chemically Stable Ion-Solvating Polymer Membrane Derived from Poly(arylene alkylene) for High-Performance Alkaline Water Electrolysis
Polymeric ion-solvating membranes1 derived from poly(arylene alkylene)s2 have emerged as promising candidates for alkaline water electrolysis, offering a PFAS-free, robust, and chemically stable alternative. This work focuses on the development of such a membrane with an emphasis on high resistance to gas crossover, addressing the challenges associated with conventional ion-exchange materials. The polymer membrane presented in this study demonstrated very good performance in alkaline water electrolysis. At 80 degrees Celsius, the membrane exhibits a specific conductivity of 36 mS/cm, underscoring its ion-solvating ability and efficiency in a 20 wt% KOH solution. The electrochemical performance is exemplified by the attainment of a 700-mA current below 2.6V with uncatalyzed nickel foam electrodes, showcasing the superior conductivity and efficiency in facilitating the electrolysis process. One of the key features of these membranes is their longevity, as evidenced by their ability to operate for more than 200 hours without any discernible voltage decay. This extended operational lifespan underscores the robustness and durability of the developed membranes, making them highly suitable for practical applications in alkaline water electrolysis. Furthermore, the membranes exhibit a high resistance to gas crossover, addressing a common challenge in electrolysis systems. This property ensures enhanced selectivity and efficiency by minimizing unwanted reactions and improving the overall electrolysis process. In conclusion, the presented work signifies a significant advancement in the development of ion-solvating polymer membranes derived from poly(arylene alkylene) for alkaline water electrolysis. The membranes not only outperform existing alternatives but also offer a sustainable and environmentally friendly solution by being PFAS-free. The demonstrated high performance, stability, and resistance to gas crossover make these membranes promising candidates for the advancement of alkaline water electrolysis technology, contributing to the development of efficient and environmentally conscious hydrogen production systems. Keywords: Alkaline; electrolysis; Poly (arylene alkylene)s; membranes; ion-solvating References: Aili, D.; Kraglund, M. R.; Rajappan, S. C.; Serhiichuk, D.; Xia, Y.; Deimede, V.; Kallitsis, J.; Bae, C.; Jannasch, P.; Henkensmeier, D.; Jensen, J. O. ACS Energy Lett. 2023, 8, 1900–1910. Zolotukhin, M. G.; Fomine, S.; Lazo, L. M.; Hernndez, M. D. C. G.; Guzmáln-Gutiérrez, M. T.; Ruiz-Trevino, A.; Fritsch, D.; Cuellas, D. C.; Fernandez-G., J. M. High Perform. Polym. 2007, 19, 638–648.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (34) , 1759
PFAS-Free: Robust and Chemically Stable Ion-Solvating Polymer Membrane Derived from Poly(arylene alkylene) for High-Performance Alkaline Water Electrolysis
Polymeric ion-solvating membranes1 derived from poly(arylene alkylene)s2 have emerged as promising candidates for alkaline water electrolysis, offering a PFAS-free, robust, and chemically stable alternative. This work focuses on the development of such a membrane with an emphasis on high resistance to gas crossover, addressing the challenges associated with conventional ion-exchange materials. The polymer membrane presented in this study demonstrated very good performance in alkaline water electrolysis. At 80 degrees Celsius, the membrane exhibits a specific conductivity of 36 mS/cm, underscoring its ion-solvating ability and efficiency in a 20 wt% KOH solution. The electrochemical performance is exemplified by the attainment of a 700-mA current below 2.6V with uncatalyzed nickel foam electrodes, showcasing the superior conductivity and efficiency in facilitating the electrolysis process. One of the key features of these membranes is their longevity, as evidenced by their ability to operate for more than 200 hours without any discernible voltage decay. This extended operational lifespan underscores the robustness and durability of the developed membranes, making them highly suitable for practical applications in alkaline water electrolysis. Furthermore, the membranes exhibit a high resistance to gas crossover, addressing a common challenge in electrolysis systems. This property ensures enhanced selectivity and efficiency by minimizing unwanted reactions and improving the overall electrolysis process. In conclusion, the presented work signifies a significant advancement in the development of ion-solvating polymer membranes derived from poly(arylene alkylene) for alkaline water electrolysis. The membranes not only outperform existing alternatives but also offer a sustainable and environmentally friendly solution by being PFAS-free. The demonstrated high performance, stability, and resistance to gas crossover make these membranes promising candidates for the advancement of alkaline water electrolysis technology, contributing to the development of efficient and environmentally conscious hydrogen production systems. Keywords: Alkaline; electrolysis; Poly (arylene alkylene)s; membranes; ion-solvating References: Aili, D.; Kraglund, M. R.; Rajappan, S. C.; Serhiichuk, D.; Xia, Y.; Deimede, V.; Kallitsis, J.; Bae, C.; Jannasch, P.; Henkensmeier, D.; Jensen, J. O. ACS Energy Lett. 2023, 8, 1900–1910. Zolotukhin, M. G.; Fomine, S.; Lazo, L. M.; Hernndez, M. D. C. G.; Guzmáln-Gutiérrez, M. T.; Ruiz-Trevino, A.; Fritsch, D.; Cuellas, D. C.; Fernandez-G., J. M. High Perform. Polym. 2007, 19, 638–648.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (40) , 3038
Tetrazole-Containing Polyelectrolytes: A New Class of Ion-Solvating Membranes for Alkaline Water Electrolysis
Alkaline ion-solvating membranes, such as those based on polybenzimidazole (PBI), offer high ion conductivity and good gas barrier properties, making them promising for next-generation alkaline water electrolyzers.1 However, the stability of commonly used PBI derivatives is limited due to gradual backbone degradation. Consequently, alternative PBI chemistries and other polymer options like poly(vinyl alcohol),2 and carboxylate functionalized styrene-ethylene-butylene copolymers are being explored to address this inherent stability issue.3 In this study, we present the synthesis and characterization of a novel type of ion-solvating membranes for alkaline water electrolyzers. These membranes are based on tetrazole functionalized polymers derived from poly(styrene-co-acrylonitrile). A one-step click-type [3+2] cycloaddition reaction was utilized to introduce tetrazole pendants by converting acrylonitrile groups in poly(styrene-co-acrylonitrile). The degree of functionalization was controlled by adjusting the content of acrylonitrile units in the polymer. Subsequent treatment in aqueous KOH solution led to the formation of negatively charged tetrazolide pendants with high ionization degrees. The alkaline stability of the tetrazolides was evaluated using both DFT simulations and model compound studies, demonstrating remarkable stability with no degradation observed for over 3000 hours in 25 wt.% KOH at 80 °C. Physicochemical properties such as electrolyte uptake, swelling behavior, thermal stability, and ion conductivity were assessed for the synthesized polymers. The electrolyte-imbibed membranes exhibited high ion conductivity, reaching up to 90 mS cm-1 in 15 wt% KOH at 80 °C. Electrolysis operation using these membranes showed stable performance for 600 hours with no signs of degradation. 1 D. Aili, M. R. Kraglund, S. C. Rajappan, D. Serhiichuk, Y. Xia, V. Deimede, J. Kallitsis, C. Bae, P. Jannasch, D. Henkensmeier, J. O. Jensen, ACS Energy Letters, 2023, 1900–1910. 2 Y. Xia, S. C. Rajappan, D. Serhiichuk, M. R. Kraglund, J. O. Jensen, D. Aili, J Memb Sci 2023, 680, 121719. 3 D. Serhiichuk, D. Tian, M. R. Almind, Z. Ma, Y. Xia, M. R. Kraglund, C. Bae, J. O. Jensen, D. Aili ACS Applied Energy Materials 2024 7 (3), 1080-1091 Figure 1 Tetrazolation of poly(styrene-co-acrylonitrile) and formation of corresponding potassium tetrazolide following equilibration in aqueous KOH. Figure 1
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (40) , 3038
Tetrazole-Containing Polyelectrolytes: A New Class of Ion-Solvating Membranes for Alkaline Water Electrolysis
Alkaline ion-solvating membranes, such as those based on polybenzimidazole (PBI), offer high ion conductivity and good gas barrier properties, making them promising for next-generation alkaline water electrolyzers.1 However, the stability of commonly used PBI derivatives is limited due to gradual backbone degradation. Consequently, alternative PBI chemistries and other polymer options like poly(vinyl alcohol),2 and carboxylate functionalized styrene-ethylene-butylene copolymers are being explored to address this inherent stability issue.3 In this study, we present the synthesis and characterization of a novel type of ion-solvating membranes for alkaline water electrolyzers. These membranes are based on tetrazole functionalized polymers derived from poly(styrene-co-acrylonitrile). A one-step click-type [3+2] cycloaddition reaction was utilized to introduce tetrazole pendants by converting acrylonitrile groups in poly(styrene-co-acrylonitrile). The degree of functionalization was controlled by adjusting the content of acrylonitrile units in the polymer. Subsequent treatment in aqueous KOH solution led to the formation of negatively charged tetrazolide pendants with high ionization degrees. The alkaline stability of the tetrazolides was evaluated using both DFT simulations and model compound studies, demonstrating remarkable stability with no degradation observed for over 3000 hours in 25 wt.% KOH at 80 °C. Physicochemical properties such as electrolyte uptake, swelling behavior, thermal stability, and ion conductivity were assessed for the synthesized polymers. The electrolyte-imbibed membranes exhibited high ion conductivity, reaching up to 90 mS cm-1 in 15 wt% KOH at 80 °C. Electrolysis operation using these membranes showed stable performance for 600 hours with no signs of degradation. 1 D. Aili, M. R. Kraglund, S. C. Rajappan, D. Serhiichuk, Y. Xia, V. Deimede, J. Kallitsis, C. Bae, P. Jannasch, D. Henkensmeier, J. O. Jensen, ACS Energy Letters, 2023, 1900–1910. 2 Y. Xia, S. C. Rajappan, D. Serhiichuk, M. R. Kraglund, J. O. Jensen, D. Aili, J Memb Sci 2023, 680, 121719. 3 D. Serhiichuk, D. Tian, M. R. Almind, Z. Ma, Y. Xia, M. R. Kraglund, C. Bae, J. O. Jensen, D. Aili ACS Applied Energy Materials 2024 7 (3), 1080-1091 Figure 1 Tetrazolation of poly(styrene-co-acrylonitrile) and formation of corresponding potassium tetrazolide following equilibration in aqueous KOH. Figure 1
- Open Access
- 8 August 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (23) , e202400844
Poly(Arylene Alkylene)s with Tetrazole Pendants for Alkaline Ion‐Solvating Polymer Electrolytes
Alkaline ion‐solvating membranes derived from a tetrazole functionalized poly(arylene alkylene) are prepared, characterized and evaluated as electrode separators in alkaline water electrolysis. The base polymer, poly[[1,1′‐biphenyl]‐4,4′‐diyl(1,1,1‐trifluoropropan‐2‐yl)], is synthesized by superacid catalyzed polyhydroxyalkylation and subsequently functionalized with tetrazole pendants. After equilibration in aqueous KOH, the relatively acidic tetrazole pendants are deprotonated to form the corresponding potassium tetrazolides. The room temperature ion conductivity is found to peak at 19 mS cm−1 in 5 wt. % KOH, and slightly declines with increasing KOH concentration to 13 mS cm−1 in 30 wt. % KOH. Based on an overall assessment of the mechanical properties, conductivity and electrode activity, 30 wt. % KOH is applied for alkaline electrolysis cell tests. Current densities of up to 1000 mA cm−2 were reached with uncatalyzed Ni‐foam electrodes at a cell voltage of less than 2.6 V, with improved gas barrier characteristics compared to that of the several times thicker Zirfon separator.
- 8 August 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (23) , e202400844
Open AccessPoly(Arylene Alkylene)s with Tetrazole Pendants for Alkaline Ion‐Solvating Polymer Electrolytes
Alkaline ion‐solvating membranes derived from a tetrazole functionalized poly(arylene alkylene) are prepared, characterized and evaluated as electrode separators in alkaline water electrolysis. The base polymer, poly[[1,1′‐biphenyl]‐4,4′‐diyl(1,1,1‐trifluoropropan‐2‐yl)], is synthesized by superacid catalyzed polyhydroxyalkylation and subsequently functionalized with tetrazole pendants. After equilibration in aqueous KOH, the relatively acidic tetrazole pendants are deprotonated to form the corresponding potassium tetrazolides. The room temperature ion conductivity is found to peak at 19 mS cm−1 in 5 wt. % KOH, and slightly declines with increasing KOH concentration to 13 mS cm−1 in 30 wt. % KOH. Based on an overall assessment of the mechanical properties, conductivity and electrode activity, 30 wt. % KOH is applied for alkaline electrolysis cell tests. Current densities of up to 1000 mA cm−2 were reached with uncatalyzed Ni‐foam electrodes at a cell voltage of less than 2.6 V, with improved gas barrier characteristics compared to that of the several times thicker Zirfon separator.
- 16 January 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (3) , 1080-1091
Carboxylated Polystyrene-b-poly(ethylene-ran-butylene)-b-polystyrene Membranes for Alkaline Water Electrolysis
- 16 January 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (3) , 1080-1091
Carboxylated Polystyrene-b-poly(ethylene-ran-butylene)-b-polystyrene Membranes for Alkaline Water Electrolysis
- Open Access
- 16 May 2023
- Published by Elsevier in Journal of Membrane Science
- Vol. 680
Poly(vinyl alcohol-co-vinyl acetal) gel electrolytes for alkaline water electrolysis
- 16 May 2023
- Published by Elsevier in Journal of Membrane Science
- Vol. 680
Open AccessPoly(vinyl alcohol-co-vinyl acetal) gel electrolytes for alkaline water electrolysis
- Top Cited PapersOpen Access
- 27 March 2023
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 8 (4) , 1900-1910
Electrode Separators for the Next-Generation Alkaline Water Electrolyzers
- 27 March 2023
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 8 (4) , 1900-1910
Top Cited PapersOpen AccessElectrode Separators for the Next-Generation Alkaline Water Electrolyzers