WOWaldemar Ogloza

Waldemar Ogloza

*This is an algorithmically generated author record based on publicly available information.

Waldemar Ogloza has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Size, Shape, Density, and Atmospheric Limit of (50000) Quaoar Revealed from 14 years of Stellar Occultation

    by Giuliano Margoti, Felipe Braga-Ribas, José Luis Ortiz, Bruno Sicardy, Josselin Desmars, B. E. Morgado, Eros de Oliveira Gradovski, Chrystian Luciano Pereira, Pablo Santos-Sanz, Altair Ramos Gomes-Júnior, et al.

    We present results from 28 stellar occultations by the large trans-Neptunian object (50000) Quaoar registered between 2018 and 2025. By performing a joint analysis of this occultation dataset, along with nine other published events, we were able to fit an oblate ellipsoid shape, with equatorial semiaxes a and b of 566 . 1 − 2.2 + 2.5 km, and a polar semiaxis, c , of 511 . 2 − 3.7 + 3.6 km. It provides an equivalent volumetric diameter of 1094.4 ± 4.6 km and polar oblateness of 0.097 ± 0.011. Considering an absolute magnitude of H = 2.79 ± 0.35, we derive a geometric albedo of p V = 0.125 ± 0.038. We have derived new upper limits to the surface pressure of a CH 4 atmosphere of 0.15 nbar (1 σ ) and 0.65 nbar (3 σ ). We also provide a table with the 36 new astrometric positions for Quaoar. Using the new system mass derived from Weywot’s orbit around Quaoar, we calculated a density of 1.760 ± 0.109 g cm −3 . Moreover, from the derived size and rotation period (8.8394 ± 0.0002 hr, we calculated that, if Quaoar is in Maclaurin hydrostatic equilibrium state, it would have a density of 1.859 ± 0.200 g cm −3 . This result, within the error bars, is compatible with the value we found. Therefore, this work shows that Quaoar can be a Maclaurin object, being eligible as a dwarf planet.

  • Open Access

    Rigorous Use of Light-curve Inversion and Stellar Occultation Techniques for Deriving a Scaled Three-dimensional Shape for the Jupiter Trojan (911) Agamemnon

    by Eros de O. Gradovski, Felipe Braga-Ribas, Altair R. Gomes-Junior, Bruno Sicardy, Jose Luis Ortiz, Giuliano Margoti, Chrystian L. Pereira, Pablo Santos-Sanz, Konrad Guhl, Josselin Desmars, et al.

    This work presents a methodology for determining the size, three-dimensional shape, and rotational parameters of small solar system objects, with rigorous uncertainty determination, using stellar occultations, rotational and phase-angle light curves. Here we analyze (911) Agamemnon, considered the third-largest Jupiter Trojan, using five rotational light curves, phase-angle data, and 12 occultations (22 positive chords). The methodology uses a genetic algorithm to compare the rotational data with synthetic light curves from the 3D model, obtaining the uncertainties from the χ 2 minimization. The model is scaled with the occultation data, to calculate dimensions, and the uncertainties. We obtained the first nonconvex model for Agamemnon using the All-Data Asteroid Modeling, considering new rotational, phase-angle, and occultation data. The methodological process was applied to derive the uncertainties, obtaining the rotational parameters λ = 128 . ° 1 ± 0 . ° 8, β = 2 . ° 3 ± 2 . ° 1, P = 6.581797 ± 0.000003 hr, and D S = 156.0 ± 7.8 km, with a σ model of 3 km (indicating the model quality relative to the occultation data). We also used the new data to test the 3D model provided by the Database of Asteroid Models from Inversion Techniques. From the nonconvex shape model rotated to Gaia observation epochs, we derive a geometric albedo of p G = 0.051 ± 0.005 for Agamemnon. The final results also indicate that (911) Agamemnon may be the second-largest known Jupiter Trojan, being smaller than (624) Hektor and larger than (617) Patroclus.

  • Open Access

    An Irregular Shape of the Jupiter Trojan (3317) Paris Revealed by Stellar Occultations and Rotational Light Curves

    by Luan M. Catani, Bruno E. Morgado, Eros Gradovski, Pablo Santos-Sanz, Bruno Sicardy, Felipe Braga-Ribas, Gustavo Benedetti-Rossi, Roberto Vieira-Martins, José-Luis Ortiz, Flavia L. Rommel, et al.

    Jupiter Trojans are key remnants of the solar system formation, preserving primordial material and recording the history of planetary migration. We present the first 3D shape model of the Jupiter Trojan (3317) Paris, obtained by combining stellar occultations and rotational light curves. We analyzed 12 occultation events between 2020 and 2022, yielding 27 positive light curves. In addition, we compiled 45 rotational light curves covering ∼8 yr, obtained from observations at the Observatório do Pico dos Dias (OPD-Brazil) and from publicly available databases such as the Asteroid Light Curve Data Exchange Format. Light-curve inversion, combined with occultation constraints, yielded an irregular 3D shape model with an equivalent-volume diameter of 126.2 ± 6.2 km and an equivalent-surface diameter of 131.5 ± 6.5. We refined the rotation period to 7.081013 ± 0.000005 hr, consistent with previous estimates and the spin axis as λ = 100 . ° 5 ± 1 . ° 1 and β = 50 . ° 7 ± 1 . ° 4. Using the surface-equivalent diameter of the shape model, we determined a geometric albedo of p V = 0.045 ± 0.002 for Paris. This study contributes to improving our understanding of the physical properties of Jupiter Trojans, and the methodologies developed in this work can be applied to the study of other small bodies in the solar system.

  • Open Access

    Detection and characterisation of binary asteroid candidates through stellar occultations

    by R. Lallemand, J. Desmars, B. Sicardy, Z. Liu, P. Tanga, L. Liberato, B. Carry, A. Leroy, Y. Kilic, M. Assafin, et al.

    Binary asteroids provide key access to fundamental parameters of Solar System remnants and planetary formations. However, the current knowledge of binary asteroids remains strongly biased by observational limitations, and main belt binary systems are still poorly characterised since current techniques preferentially detect either widely separated binaries through direct imaging or close and bright systems via photometry and radar for near-Earth asteroids. In this context, the high-precision astrometry of the Gaia mission has revealed a new population of candidate binaries exhibiting dynamical signatures consistent with unresolved companions. Stellar occultations have therefore emerged as one of the most effective methods to confirm the binary nature of a candidate and improve the current census of intermediate-size systems. This work is part of the GaiaMoons program, and our aim with it was to characterise a sample of 357 potential binary asteroid targets and confirm or refute their binary nature. The properties of these candidates were derived from the high-precision photometric and astrometric observations provided by the Gaia satellite. We adopted stellar occultation as the observational method to study these targets. Between October 2023 and February 2026, we successfully carried out 165 observations for 101 targets. We subsequently analysed these events in the context of the available literature and previously reported observations. Out of the 165 observations, 76 led at least to one positive observation. Among these, 33 had at least two positives for 24 objects that have undergone unprecedented occultation observation campaigns, with four objects showing indications of binary or contact binary features, namely (1127) Mimi, (35420) 1998 AG_6, (206) Hersilia, and (36882) 2000 SW_155. For the vast majority of these objects, the resulting dataset from all reduced observations provides unique physical and astrometric constraints, as they had never been observed through stellar occultations before. In addition, 89 observations with only negatives allowed the near environment of the targets to be probed. GaiaMoons illustrates how stellar occultation campaigns associated with Gaia observations generate a self-improving cycle to find new binary, thereby probing size and shape to constrain future observations. By standardising this approach, we deliver critical data in unexplored parameter spaces, resolving long-standing observational ambiguities.


  • Open Access

    The spin state of asteroid Apophis and a prediction of its change during the 2029 close encounter with Earth

    by J. Ďurech, D. Vokrouhlický, P. Pravec, K. Hornoch, P. Kušnirák, P. Fatka, H. Kučáková, J. Hanuš, M. Ferrais, E. Jehin, et al.

    Context . On April 13, 2029, the asteroid Apophis will pass near Earth at a geocentric distance of about 38 000 km. This will provide a unique opportunity to study the effects of Earth’s gravitational torque on the asteroid’s spin state and figure. Numerical models have suggested that the post-encounter spin state will critically depend on the orientation of Apophis during the flyby. Aims . We aim to determine the spin state of Apophis from its photometric observations collected during two apparitions in 2012–2013 and 2020–2021. This will enable us to accurately predict the pre-encounter rotation state and, by accounting for Earth’s gravitational torque, predict a range of possible post-encounter states. Methods . We used the light curve inversion method for tumbling asteroids to reconstruct the spin state of Apophis and its convex shape model. The result is adopted as the initial condition of a numerical model describing Apophis’s future rotation state. Results . The data from the two apparitions are insufficient to determine Apophis’s rotation and precession periods uniquely. The formally best-fit solution is P ϕ = 27.374 ± 0.001 h for the precession period and P ψ = 262.2 ± 0.1 h for the rotation period, but at least two other combinations of the periods provide a similarly good fit to the available data. All the currently acceptable models result in approximately the same pre-encounter orientation of Apophis in early 2029 (within 20° in terms of Euler angles). This is because the accurate photometric data were collected during two apparitions separated by 8 years, which is the same interval as from 2021 to 2029. Although the close encounter with Earth in April 2029 hugely increases the post-encounter uncertainty of Apophis’s spin state, the short-axis spin mode will be preserved with a high likelihood. Conclusions . Additional observations taken in 2027 and 2028 will break the ambiguity in Apophis’s pre-encounter spin solution and allow us to get a more accurate post-encounter spin state prediction.

  • TESS light curve and apsidal motion in the eccentric eclipsing binary V871 Aquilae

    by Marek Wolf, Hana Kučáková, Waldemar Ogłoza, Martin Mašek, Andrej Mudray

  • Open Access

    A Combined TESS and Ground-based Study of Transit Timing Variations in HAT-P-16, TOI-1516 and TOI-2046 Systems

    by E. Sonbas, K. Kaplan, M. Tanriver, A. Keskin, K. Dhuga, A. Bulut, E. Göğüş, W. Ogłoza

    We present new results for the hot Jupiters HAT-P-16b, TOI-1516b, and TOI-2046b, based on photometric observations collected using both space- and ground-based facilities. Ground-based data were collected in the 2020–2024 time span with the 0.6 m telescope (ADYU60) located at the Adiyaman University Application and Research Center (Adiyaman, Türkiye) and the 1.0 m telescope at the Türkiye National Observatory (TUG, Türkiye). Through a combination of fits to our ground-based data, the midtransit times data from TESS, and additional data taken from the literature, we present an updated linear ephemeris for each system. Transit timing variations (TTVs) were analyzed using linear, orbital decay, and apsidal precession models. The resulting BIC(ΔBIC) values indicate that the orbital decay model is statistically favored for HAT-P-16b and TOI-1516b, while the constant period model is preferred for TOI-2046b. False alarm probabilities (FAPs) were computed to assess the significance of any periodic signals. TOI-1516b displays a strong TTV signal with a FAP (of 0.0001) well below the 0.01 threshold, suggesting a likely dynamical origin that warrants further investigation. The higher FAP value (0.0055) for HAT-P-16b suggests that the case of a possible presence of an additional body in the system is less convincing. In contrast, the much higher FAP value (0.0196) for TOI-2046b implies that there are no statistically significant TTVs.

  • Open Access

    A high geometric albedo and small size for the Haumea cluster member (24835) 1995 SM 55 determined from a stellar occultation and photometric observations

    by J. L. Ortiz, N. Morales, B. Sicardy, F. L. Rommel, F. Braga-Ribas, Y. Kilic, E. Fernández-Valenzuela, J. L. Rizos, B. Morgado, L. Catani, et al.

    Context . Trans-Neptunian objects (TNOs) are thought to be some of the most ancient and primitive bodies in our Solar System. Understanding their basic physical properties is crucial to unraveling their origin and the evolution of the outer Solar System beyond Neptune. Stellar occultations are a highly effective and sensitive method of studying these distant and faint objects, allowing us to gather essential information about their physical characteristics. (24835) 1995 SM 55 is one of the few members of the Haumea orbital cluster and, therefore, is an especially relevant body to study within the TNO population. Aims . The main objectives of the present work are to determine the projected size, absolute magnitude, and geometric albedo of 1995 SM 55 and to analyze the results compared to Haumea. Methods . We predicted a stellar occultation by this TNO for February, 25, 2024, carried out a specific campaign to observe the occultation, and derived the projected size and shape from the occultation observations using an elliptical fit to the occultation chords. We also analyzed a large set of photometric observations of (24835) 1995 SM 55 to obtain the absolute magnitude and the rotational period. Finally, we combined these results to derive the geometric albedo of this TNO. Results . The occultation was successfully detected from seven instruments located at five different sites; 33 other sites reported negative detections. Using an elliptical fit to the occultation chords, we determined the size and shape of the limb of (24835) 1995 SM 55 during the occultation: an ellipse with semi-axes (104.3 ± 0.4) × (83.5 ± 0.5) km. The area-equivalent diameter ( D eq,A ) for this ellipse is 186.7 ± 1.8 km. This is consistent with the upper limit of 250 km estimated from Herschel Observatory thermal data. From our photometric observations, we derived an absolute magnitude ( H V ) of 4.55 ± 0.03, a phase slope parameter of 0.04 ± 0.02 mag/deg, and a V − R value of 0.37 ± 0.05. The rotational variability has a maximum peak-to-valley amplitude (∆ m ) of 0.05 mag, but we could not derive an unambiguous rotational period. Combining the projected size from the occultation with the absolute photometry, we obtained a geometric albedo in the V band ( p V ) of 0.80 ± 0.04 for 1995 SM 55 . This value is remarkably high for a TNO and somewhat higher than that of Haumea, but consistent with the concept that 1995 SM 55 is a member of the orbital cluster of Haumea.

  • Open Access

    A high geometric albedo and small size of the Haumea cluster member (24835) 1995 SM55 from a stellar occultation and photometric observations

    by J. L. Ortiz, N. Morales, B. Sicardy, F. L. Rommel, F. Braga-Ribas, Y. Kilic, E. Fernández-Valenzuela, J. L. Rizos, B. Morgado, L. Catani, et al.

    Trans-Neptunian objects (TNOs) are among the most ancient bodies of the solar system. Understanding their physical properties is key to constraining their origin and the evolution of the outer regions beyond Neptune. Stellar occultations provide highly accurate size and shape information. (24835) 1995 SM55 is one of the few members of the Haumea cluster and thus of particular interest. We aimed to determine its projected size, absolute magnitude, and geometric albedo, and to compare these with Haumea. A stellar occultation on 25 February 2024 was observed from five sites, with seven positive detections and 33 negative chords. An elliptical fit to the occultation chords yields semi-axes of $(104.3 \pm 0.4) \times (83.5 \pm 0.5)$ km, giving an area-equivalent diameter of $186.7 \pm 1.8$ km, smaller than the 250 km upper limit from Herschel thermal data. Photometry provides an absolute magnitude $H_V = 4.55 \pm 0.03$, a phase slope of $0.04 \pm 0.02$ mag/deg, and a $V-R = 0.37 \pm 0.05$. The rotational variability has an amplitude $Δm = 0.05$ mag, but the period remains uncertain. Combining occultation and photometry, we derive a geometric albedo $p_V = 0.80 \pm 0.04$, one of the highest values measured for a TNO. This value is slightly higher than that of Haumea, consistent with the interpretation that 1995 SM55 belongs to the Haumea cluster.

  • Open Access

    Asteroid sizes determined with thermophysical model and stellar occultations

    by A. Choukroun, A. Marciniak, J. Ďurech, J. Perła, W. Ogłoza, R. Szakáts, L. Molnár, A. Pál, F. Monteiro, I. Mieczkowska, et al.

    Context. The sizes of many asteroids, especially slowly rotating, low-amplitude targets, remain poorly constrained due to selection effects. These biases limit the availability of high-quality data, leaving size estimates reliant on spherical shape assumptions. Such approximations introduce significant uncertainties propagating, for example, into density determinations or thermophysical and compositional studies, affecting our understanding of asteroid properties. Aims. This work targets poorly studied main-belt asteroids, for most of which no shape models were previously available. Using only high-quality, dense light curves, thermal infrared observations (systematically including WISE data), and stellar occultations, we aimed to produce reliable shape models and scale them using two independent techniques, allowing for size comparison at the end. We conducted two observing campaigns to achieve this: one to obtain dense photometric light curves and another to acquire multi-chord stellar occultations by these objects. Methods. Shape and spin models were reconstructed using light curve inversion techniques. Sizes were determined via two methods: (1) advanced thermophysical modelling using the convex inversion thermophysical model (CITPM), which optimises spin and shape models to light curve data in the visible range together with infrared data, and (2) scaling the shape models with stellar occultations. Results. We obtained precise sizes and shape models for 15 asteroids. CITPM and occultation-derived sizes agree within 5% for most cases, demonstrating the reliability of the modelling approach. Larger discrepancies are usually linked to incomplete occultation chord coverage. The study also provides insights into surface properties, including albedo, surface roughness and thermal inertia. Conclusions. The use of high-quality data, coupled with an advanced TPM that uses both thermal and visible data while allowing the shape model to be adjusted according to both types of data, enabled us to determine sizes with precision comparable to those derived from multichord stellar occultations. We resolved substantial inconsistencies in previous size determinations for target asteroids, providing good input for future studies on asteroid densities and surface properties.