Duraivelu Jayabalakrishnan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Duraivelu Jayabalakrishnan has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Santhana Babu Amur Venugopal
Department of Mechanical Engineering Chennai Institute of Technology Chennai India
5 shared publications - Manickam Balasubramanian
Department of Mechanical Engineering, RMK College of Engineering and Technology, Chennai, India
3 shared publications - Arun Prakash Vincent Rethnam
Department of Mechanical Engineering, J.N.N Institute of Engineering, Chennai 600025, India
2 shared publications T. Maridurai
Department of Mechanical Engineering, Saveetha School of Engineering, SIMATS, Chennai, India
2 shared publications- Veerasundaram Jayaseelan
Department of Mechanical Engineering, Saveetha Engineering College, Chennai, India
2 shared publications Antony Benson Benjamin
Chennai Institute of Technology
1 shared publication
Latest Publications
- 16 July 2026
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- p. e70248
Laser Controlled Solid Propulsion: Advances, Challenges, and Future Trends
Laser controlled solid propulsion (LCSP) represents a novel technology currently under development that offers controllable ignition, throttling, extinguishing, and reignition capabilities for solid rocket motors. The present review emphasizes two decades of research into the concepts, propellant compositions, combustion mechanisms, component development, and systems‐level demonstrations for LCSP. Key advancements associated with the laser/propellant interaction, photosensitive/gel propellants, carbon black absorbents, and diode laser microthrusters are discussed. Experimental studies showed that laser power density influences ignition delay time, burn rate, chamber pressure, and thrust production, which are covered in the present review. Possible challenges in LCSP development including optical contamination, combustion instability, formulation improvements, scaling, environmental effects, modeling, and testing issues are identified. Innovative approaches involving new propellant chemistries, optical contaminants tolerant optics, feedback control, integration, and flying LCSP have been outlined briefly.
- 16 July 2026
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- p. e70248
Laser Controlled Solid Propulsion: Advances, Challenges, and Future Trends
Laser controlled solid propulsion (LCSP) represents a novel technology currently under development that offers controllable ignition, throttling, extinguishing, and reignition capabilities for solid rocket motors. The present review emphasizes two decades of research into the concepts, propellant compositions, combustion mechanisms, component development, and systems‐level demonstrations for LCSP. Key advancements associated with the laser/propellant interaction, photosensitive/gel propellants, carbon black absorbents, and diode laser microthrusters are discussed. Experimental studies showed that laser power density influences ignition delay time, burn rate, chamber pressure, and thrust production, which are covered in the present review. Possible challenges in LCSP development including optical contamination, combustion instability, formulation improvements, scaling, environmental effects, modeling, and testing issues are identified. Innovative approaches involving new propellant chemistries, optical contaminants tolerant optics, feedback control, integration, and flying LCSP have been outlined briefly.
- 5 July 2026
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 51 (10) , 1622-1636
Microwave‐Controlled Solid Propulsion: Mechanisms, Materials, Actuation Strategies, and Pathways to Digitally Throttleable Rocket Motors
Significant success has been achieved in the area of microwave‐controlled solid propulsion starting from investigations in the realm of passively boosting burn rates to active microwave‐controlled propulsion with a digital controller. This review discusses recent advancements in the combination of microwaves with different propellant materials through such phenomena as plasma‐aided combustion, eddy current heating of conductive particles, switching susceptors made of graphene, and microwave‐assisted formation of porosity. Burn rate modulation, ignition‐extinction cycles, and local burn rate amplification by up to six times have been observed using electromagnetic actuation. Multiphysics simulation and diagnostics reveal the physics underlying burn rate modulation in alkali‐doped AP/HTPB propellants, embedded antenna arrays, and reduced graphene oxide‐encapsulated thermites, which provide localized energy delivery and fast ignition capabilities. Current research directions include trade‐offs related to dopants, cavity detuning, scale‐up to rocket motor geometries, electromagnetic interference, power‐system design, and compatibility with additive manufacturing techniques. The emphasis lies on solid propulsion‐specific aspects of controllability, energy efficiency, and reliability. Last, research roadmaps are outlined for next‐generation solid rocket motors.
- 5 July 2026
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 51 (10) , 1622-1636
Microwave‐Controlled Solid Propulsion: Mechanisms, Materials, Actuation Strategies, and Pathways to Digitally Throttleable Rocket Motors
Significant success has been achieved in the area of microwave‐controlled solid propulsion starting from investigations in the realm of passively boosting burn rates to active microwave‐controlled propulsion with a digital controller. This review discusses recent advancements in the combination of microwaves with different propellant materials through such phenomena as plasma‐aided combustion, eddy current heating of conductive particles, switching susceptors made of graphene, and microwave‐assisted formation of porosity. Burn rate modulation, ignition‐extinction cycles, and local burn rate amplification by up to six times have been observed using electromagnetic actuation. Multiphysics simulation and diagnostics reveal the physics underlying burn rate modulation in alkali‐doped AP/HTPB propellants, embedded antenna arrays, and reduced graphene oxide‐encapsulated thermites, which provide localized energy delivery and fast ignition capabilities. Current research directions include trade‐offs related to dopants, cavity detuning, scale‐up to rocket motor geometries, electromagnetic interference, power‐system design, and compatibility with additive manufacturing techniques. The emphasis lies on solid propulsion‐specific aspects of controllability, energy efficiency, and reliability. Last, research roadmaps are outlined for next‐generation solid rocket motors.
- 11 April 2026
- Published by Wiley in Propellants, Explosives, Pyrotechnics
Electrically Controlled Solid Propulsion: Advances, Challenges, and Future Trends
Electrically Controlled Solid Propulsion (ECSP) is a revolutionary method of propulsion, which combines the solid propellant high energy density with real time controllability made possible by electrical current. ECSP is a sharp contrast to the traditional solid propellants whose thrust profiles were fixed, with on‐demand ignition, extinguishment, and fine modulation of the thrust. New developments have seen optimized electrochemical salt systems, nanostructured additives and advanced electrode materials, all of which have enhanced ignition reliability, control of burning rate and combustion efficiency. Additionally, multi‐stage decomposition studies and ion transport studies have further broadened the knowledge of the electro thermal coupling mechanisms. They find use in micro‐propulsion units to serve from satellite missions to rocket motors, where programmability increases the safety, flexibility in the missions, and operational requirements. Nonetheless, there are still some problems with ignition delays, long‐term stability, electrode degeneration, and scaling to increased application. The state‐of‐the‐art in ECSP, including technical innovations, outstanding shortcomings, and future direction to a practical implementation in aerospace and defense propulsion are critically examined in this review.
- 11 April 2026
- Published by Wiley in Propellants, Explosives, Pyrotechnics
Electrically Controlled Solid Propulsion: Advances, Challenges, and Future Trends
Electrically Controlled Solid Propulsion (ECSP) is a revolutionary method of propulsion, which combines the solid propellant high energy density with real time controllability made possible by electrical current. ECSP is a sharp contrast to the traditional solid propellants whose thrust profiles were fixed, with on‐demand ignition, extinguishment, and fine modulation of the thrust. New developments have seen optimized electrochemical salt systems, nanostructured additives and advanced electrode materials, all of which have enhanced ignition reliability, control of burning rate and combustion efficiency. Additionally, multi‐stage decomposition studies and ion transport studies have further broadened the knowledge of the electro thermal coupling mechanisms. They find use in micro‐propulsion units to serve from satellite missions to rocket motors, where programmability increases the safety, flexibility in the missions, and operational requirements. Nonetheless, there are still some problems with ignition delays, long‐term stability, electrode degeneration, and scaling to increased application. The state‐of‐the‐art in ECSP, including technical innovations, outstanding shortcomings, and future direction to a practical implementation in aerospace and defense propulsion are critically examined in this review.
- 2 March 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Advancements in flux composition for flux-assisted tungsten inert gas welding: Innovations, challenges and future directions
This review critically considers recent advances in flux composition for flux-assisted tungsten inert gas welding methods viz. activated tungsten inert gas and flux-bounded tungsten inert gas. This manuscript, looking beyond the penetration-focused discussions, integrates new flux design approaches such as nanoparticle-enhanced, multicomponent, and sustainability-based flux systems that assess their mechanistic roles in arc constriction, reversal of Marangoni convection, and arc-pool interactions. Among the novelties here is a holistic analysis of flux chemistry-process-property relationships across a wide range of alloy systems, with particular emphasis on material-specific responses and inevitable trade-offs between penetration enhancement, microstructural stability, and mechanical integrity. Contradictions and divergences in reported results are deeply analyzed. Laboratory-scale observations are also placed in the context of recorded industrial applications, documenting reasons for poor large-scale adoption: flux sensitivity, lack of standardization, and environmental concerns. Through bringing together the fundamental mechanisms, engineering implications, and future research priorities, this work will provide a process-engineering-based framework to take flux-assisted tungsten inert gas welding forward toward robust and industrially deployable solutions.
- 2 March 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Advancements in flux composition for flux-assisted tungsten inert gas welding: Innovations, challenges and future directions
This review critically considers recent advances in flux composition for flux-assisted tungsten inert gas welding methods viz. activated tungsten inert gas and flux-bounded tungsten inert gas. This manuscript, looking beyond the penetration-focused discussions, integrates new flux design approaches such as nanoparticle-enhanced, multicomponent, and sustainability-based flux systems that assess their mechanistic roles in arc constriction, reversal of Marangoni convection, and arc-pool interactions. Among the novelties here is a holistic analysis of flux chemistry-process-property relationships across a wide range of alloy systems, with particular emphasis on material-specific responses and inevitable trade-offs between penetration enhancement, microstructural stability, and mechanical integrity. Contradictions and divergences in reported results are deeply analyzed. Laboratory-scale observations are also placed in the context of recorded industrial applications, documenting reasons for poor large-scale adoption: flux sensitivity, lack of standardization, and environmental concerns. Through bringing together the fundamental mechanisms, engineering implications, and future research priorities, this work will provide a process-engineering-based framework to take flux-assisted tungsten inert gas welding forward toward robust and industrially deployable solutions.
- 13 February 2026
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
- Vol. 33 (04)
EFFECT OF REINFORCEMENT PARTICLES (SiC/ALUMINA) ADDITION ON Al6061 ALLOY AND OPTIMIZATION OF DRY SLIDING WEAR PROPERTIES USING GRA
Metal matrix composites have witnessed a sharp rise in interest in the latest trends due to their superior strength-to-weight ratios. These composites display outstanding qualities including resistance to wear and corrosion, improved specific strength, high specific strength, and a high elastic modulus. The goal of this research work is to enhance the parameters of dry sliding wear in an Al6061 matrix by adding 3% alumina (Al 2 O[ ] and 10% silicon carbide (SiC). Stir-cast composite material specimens are produced in compliance with ASTM guidelines. To reduce wear rate and coefficient of friction, Taguchi’s L[ ] orthogonal array and pin-on-disc wear testing apparatus are utilized. Analysis of variance is a method to look at the rate of wear and coefficient of friction (ANOVA). SEM analysis is carried out to study wear trends as well as confirm the results of the experiment. It shows that the suggested technique enhances the hybrid composites made of aluminum 6061, SiC, and Al 2 O 3 .
- 13 February 2026
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
- Vol. 33 (04)
EFFECT OF REINFORCEMENT PARTICLES (SiC/ALUMINA) ADDITION ON Al6061 ALLOY AND OPTIMIZATION OF DRY SLIDING WEAR PROPERTIES USING GRA
Metal matrix composites have witnessed a sharp rise in interest in the latest trends due to their superior strength-to-weight ratios. These composites display outstanding qualities including resistance to wear and corrosion, improved specific strength, high specific strength, and a high elastic modulus. The goal of this research work is to enhance the parameters of dry sliding wear in an Al6061 matrix by adding 3% alumina (Al 2 O[ ] and 10% silicon carbide (SiC). Stir-cast composite material specimens are produced in compliance with ASTM guidelines. To reduce wear rate and coefficient of friction, Taguchi’s L[ ] orthogonal array and pin-on-disc wear testing apparatus are utilized. Analysis of variance is a method to look at the rate of wear and coefficient of friction (ANOVA). SEM analysis is carried out to study wear trends as well as confirm the results of the experiment. It shows that the suggested technique enhances the hybrid composites made of aluminum 6061, SiC, and Al 2 O 3 .
- 12 February 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Enhanced mechanical properties and penetration in AA 6061-T6 welds using flux bounded TIG (FBTIG) welding
Flux bounded tungsten inert gas (FBTIG) welding is investigated as an advanced joining technique to overcome the limited penetration and joint efficiency of regular tungsten inert gas (TIG) welding in AA6061-T6 aluminum alloy. Bead-on-plate welding of 8 mm thick plates showed a significant increase in effective weld zone depth from 1.6 mm in regular TIG weld to 5.2 mm in FBTIG weld. Tensile test results revealed that regular TIG welds could achieve only 42% of base metal strength with ultimate tensile strength (UTS) of 129 MPa and elongation of 6.5%, whereas FBTIG welds showed improved joint efficiency of 54% with UTS of 166 MPa and elongation of 8.5%. Post-weld heat treatment further increased strength and ductility, achieving 65% joint efficiency with UTS of 200 MPa and elongation of 10%. Scanning electron microscope fractography confirmed progressive grain refinement from TIG to FBTIG welds, with finer and more uniform dimples indicating enhanced ductile fracture behavior. Post-FBTIG weld heat treatment showed increased equiaxed and relatively coarse fracture surface features, suggesting changes in stress and precipitation conditions that favor enhanced void development and recovery of ductility demonstrating the novelty of FBTIG welding process.
- 12 February 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Enhanced mechanical properties and penetration in AA 6061-T6 welds using flux bounded TIG (FBTIG) welding
Flux bounded tungsten inert gas (FBTIG) welding is investigated as an advanced joining technique to overcome the limited penetration and joint efficiency of regular tungsten inert gas (TIG) welding in AA6061-T6 aluminum alloy. Bead-on-plate welding of 8 mm thick plates showed a significant increase in effective weld zone depth from 1.6 mm in regular TIG weld to 5.2 mm in FBTIG weld. Tensile test results revealed that regular TIG welds could achieve only 42% of base metal strength with ultimate tensile strength (UTS) of 129 MPa and elongation of 6.5%, whereas FBTIG welds showed improved joint efficiency of 54% with UTS of 166 MPa and elongation of 8.5%. Post-weld heat treatment further increased strength and ductility, achieving 65% joint efficiency with UTS of 200 MPa and elongation of 10%. Scanning electron microscope fractography confirmed progressive grain refinement from TIG to FBTIG welds, with finer and more uniform dimples indicating enhanced ductile fracture behavior. Post-FBTIG weld heat treatment showed increased equiaxed and relatively coarse fracture surface features, suggesting changes in stress and precipitation conditions that favor enhanced void development and recovery of ductility demonstrating the novelty of FBTIG welding process.
- 17 December 2024
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
- Vol. 33 (10)
MICROSTRUCTURAL ANALYSIS OF AN AZ31 ALLOY PLATE PROCESSED WITH ECAP AND ELECTRO PULSING TREATMENT
The electro-pulsing treatment (EPT) method enhanced material properties, such as recrystallization, structure, microstructural recrystallization, and grain refinement. The EPT precipitation behavior of the [ ]-Mg[ ]Al[ ] Phase in the AZ31 composite was inspected using SEM and EBSD patterns. The experimental outcomes indicate that the EPT process efficiently achieved a spherical Mg[ ]Al[ ]phase (nearly 310 nm) and a regular UFG structure (almost 890[ ]nm). AZ31 alloys with strengthened texture after EPT for 40[ ][ ]m for 3[ ]min. Structural characteristics, recrystallization, and microstructure grain enhancement can be achieved through performing EPT at the lowest temperature over a short period of time.
- 17 December 2024
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
- Vol. 33 (10)
MICROSTRUCTURAL ANALYSIS OF AN AZ31 ALLOY PLATE PROCESSED WITH ECAP AND ELECTRO PULSING TREATMENT
The electro-pulsing treatment (EPT) method enhanced material properties, such as recrystallization, structure, microstructural recrystallization, and grain refinement. The EPT precipitation behavior of the [ ]-Mg[ ]Al[ ] Phase in the AZ31 composite was inspected using SEM and EBSD patterns. The experimental outcomes indicate that the EPT process efficiently achieved a spherical Mg[ ]Al[ ]phase (nearly 310 nm) and a regular UFG structure (almost 890[ ]nm). AZ31 alloys with strengthened texture after EPT for 40[ ][ ]m for 3[ ]min. Structural characteristics, recrystallization, and microstructure grain enhancement can be achieved through performing EPT at the lowest temperature over a short period of time.
- 10 November 2023
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 18 (14)
Influence on the Energy Conservation and Green Environment R152A Refrigeration with Various Nanorefrigerants
Global Warming Potential (GWP) has proven to be just as critical in determining a possible coolant in recent years as Ozone Depletion Potential (ODP). By lowering the refrigerant charge and enhancing the coolant containment systems, R152A emissions are now aggressively reduced. The option to use the R152A device must be discussed due to concerns about its global warming potential. Disperse the specified quantities of nanoparticles in the compressor oil using a magnetic stirrer for two hours, and then ultrasonic dissolve for four hours to prepare the necessary volume fractions. The experiments showed a performance improvement using CuOs with 0.5% volume fractions with a base refrigerant such as R152A. Experimental results from three different nanoparticles, such as CuO, ZnO and Al2O3, indicate strong miscibility of the nano-CuO lubricant and an increase in lubricity oil to two nanoparticles.
- 10 November 2023
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 18 (14)
Influence on the Energy Conservation and Green Environment R152A Refrigeration with Various Nanorefrigerants
Global Warming Potential (GWP) has proven to be just as critical in determining a possible coolant in recent years as Ozone Depletion Potential (ODP). By lowering the refrigerant charge and enhancing the coolant containment systems, R152A emissions are now aggressively reduced. The option to use the R152A device must be discussed due to concerns about its global warming potential. Disperse the specified quantities of nanoparticles in the compressor oil using a magnetic stirrer for two hours, and then ultrasonic dissolve for four hours to prepare the necessary volume fractions. The experiments showed a performance improvement using CuOs with 0.5% volume fractions with a base refrigerant such as R152A. Experimental results from three different nanoparticles, such as CuO, ZnO and Al2O3, indicate strong miscibility of the nano-CuO lubricant and an increase in lubricity oil to two nanoparticles.
- Open Access
- 24 July 2023
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2023, 1-8
Tribological Behavior of Ni-P Electroless Coating of Inconel 625 with Multiwall Nano Carbon Tubes
An attempt was taken to study the wear rate of coated Inconel 625 using 0.3gm of multiwall carbon tubes (MWCNT).The coating was carried out by the Ni-P electroless coating method. The Ni-P-MWCNT coating was prepared by using nickel phosphorous solution. The sliding wear test was conducted using pin on discs tribometer. The wear rate behavior was investigated at various levels of pin on discs tribometer factors, and a predictive model was developed using regression equations. The wear test experiment was carried out based on the L27 orthogonal array. The wear process parameters load, sliding velocity, and sliding distance were chosen. It was observed that the rate of wear increased as the load increases, whereas increase in sliding velocity and sliding distance reduces the rate of wear. The developed regression model was validated with the measured wear rate. The percentage error was observed within 0.99.
- 24 July 2023
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2023, 1-8
Open AccessTribological Behavior of Ni-P Electroless Coating of Inconel 625 with Multiwall Nano Carbon Tubes
An attempt was taken to study the wear rate of coated Inconel 625 using 0.3gm of multiwall carbon tubes (MWCNT).The coating was carried out by the Ni-P electroless coating method. The Ni-P-MWCNT coating was prepared by using nickel phosphorous solution. The sliding wear test was conducted using pin on discs tribometer. The wear rate behavior was investigated at various levels of pin on discs tribometer factors, and a predictive model was developed using regression equations. The wear test experiment was carried out based on the L27 orthogonal array. The wear process parameters load, sliding velocity, and sliding distance were chosen. It was observed that the rate of wear increased as the load increases, whereas increase in sliding velocity and sliding distance reduces the rate of wear. The developed regression model was validated with the measured wear rate. The percentage error was observed within 0.99.