Yujing Wu
Yujing Wu has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Liquan Chen
Key Laboratory for Renewable Energy Beijing Key Laboratory for New Energy Materials and Devices Beijing National Laboratory for Condensed Matter Physics Institute of Physics Chinese Academy of Sciences Beijing 100190 China
4 shared publications- Fan Wu
Eastern Institute for Advanced Study Ningbo Institute of Digital Twin, Eastern Institute of Technology Ningbo China
3 shared publications - Hong Li
Chinese Academy of Sciences
3 shared publications Shuo Wang
Tianmu Lake Institute of Advanced Energy Storage Technologies Liyang Jiangsu 213300 China
3 shared publications- Chen Li
Department of Biology, Chemistry, Pharmacy, Free University of Berlin, Berlin, Germany
1 shared publication Fan Wu
Key Laboratory for Renewable Energy, Beijing Key Laboratory for New Energy Materials and Devices, Beijing National Laboratory for Condensed Matter Physics Institute of Physics, Chinese Academy of Sciences Beijing China
1 shared publication
Latest Publications
- Open Access
- 1 December 2023
- Published by American Association for Cancer Research (AACR) in Cancer Immunology Research
- Vol. 11 (12_Supplem) , B049
Abstract B049: Lipid nanoparticle-delivered toll-like receptor agonists are highly effective in cancer immunotherapy
Background: Tumor immunotherapy has shown promising efficacy in various types of cancer. However, the effectiveness of immunotherapy is often limited by the immune-suppressive microenvironment within tumors. To address this challenge, we developed a method of intratumoral injection using lipid nanoparticles (LNPs) to deliver Toll-like receptor 7, 8, and 9 agonists. LNPs effectively enhance immune activation while reducing systemic responses by increasing drug retention within the tumor. Methods: We encapsulated 30nt-CpG and Resiquimod into LNPs (QTsomeTM). Subcutaneous inoculation of 2 × 106 MC38 cells was performed in mice. Once the average tumor volume reached approximately 100mm3, we divided 15 mice into 3 groups based on tumor volume. Intratumoral injections began on the same day of grouping, with a dosage of 1mg/kg (5 injections every 3 days). Tumor volume and body weight were measured twice a week. We conducted two parallel experiments, each with 7 mice for the MC38 model and 8 mice for the B16 melanoma model in each group, to compare the efficacy of 26nt-CpG and 30nt-CpG. Results: On the 15th day post-dosing, the tumor growth inhibition rate (TGI) was 79.9% (PConclusion: In conclusion, the use of LNP-delivered Toll-like receptor agonists demonstrated excellent tumor therapeutic effects and good safety in mouse models. Activation of Toll-like receptors effectively stimulated immune cells such as CD8+ T cells and NK cells, enhancing their ability to kill tumor cells. Direct injection of LNPs into the tumor improved this effect while reducing systemic side effects. This drug holds promise as a broad-spectrum anti-tumor treatment and may have potential for expanding the indications of existing tumor immunotherapies. Citation Format: Jun Bai, Fei Su, Chen Li, Yujing Wu, Jing Li, Xiaobin Zhao, Yongsheng Yang, Robert J Lee. Lipid nanoparticle-delivered toll-like receptor agonists are highly effective in cancer immunotherapy [abstract]. In: Proceedings of the AACR Special Conference in Cancer Research: Tumor Immunology and Immunotherapy; 2023 Oct 1-4; Toronto, Ontario, Canada. Philadelphia (PA): AACR; Cancer Immunol Res 2023;11(12 Suppl):Abstract nr B049.
- 1 December 2023
- Published by American Association for Cancer Research (AACR) in Cancer Immunology Research
- Vol. 11 (12_Supplem) , B049
Open AccessAbstract B049: Lipid nanoparticle-delivered toll-like receptor agonists are highly effective in cancer immunotherapy
Background: Tumor immunotherapy has shown promising efficacy in various types of cancer. However, the effectiveness of immunotherapy is often limited by the immune-suppressive microenvironment within tumors. To address this challenge, we developed a method of intratumoral injection using lipid nanoparticles (LNPs) to deliver Toll-like receptor 7, 8, and 9 agonists. LNPs effectively enhance immune activation while reducing systemic responses by increasing drug retention within the tumor. Methods: We encapsulated 30nt-CpG and Resiquimod into LNPs (QTsomeTM). Subcutaneous inoculation of 2 × 106 MC38 cells was performed in mice. Once the average tumor volume reached approximately 100mm3, we divided 15 mice into 3 groups based on tumor volume. Intratumoral injections began on the same day of grouping, with a dosage of 1mg/kg (5 injections every 3 days). Tumor volume and body weight were measured twice a week. We conducted two parallel experiments, each with 7 mice for the MC38 model and 8 mice for the B16 melanoma model in each group, to compare the efficacy of 26nt-CpG and 30nt-CpG. Results: On the 15th day post-dosing, the tumor growth inhibition rate (TGI) was 79.9% (PConclusion: In conclusion, the use of LNP-delivered Toll-like receptor agonists demonstrated excellent tumor therapeutic effects and good safety in mouse models. Activation of Toll-like receptors effectively stimulated immune cells such as CD8+ T cells and NK cells, enhancing their ability to kill tumor cells. Direct injection of LNPs into the tumor improved this effect while reducing systemic side effects. This drug holds promise as a broad-spectrum anti-tumor treatment and may have potential for expanding the indications of existing tumor immunotherapies. Citation Format: Jun Bai, Fei Su, Chen Li, Yujing Wu, Jing Li, Xiaobin Zhao, Yongsheng Yang, Robert J Lee. Lipid nanoparticle-delivered toll-like receptor agonists are highly effective in cancer immunotherapy [abstract]. In: Proceedings of the AACR Special Conference in Cancer Research: Tumor Immunology and Immunotherapy; 2023 Oct 1-4; Toronto, Ontario, Canada. Philadelphia (PA): AACR; Cancer Immunol Res 2023;11(12 Suppl):Abstract nr B049.
- 7 August 2023
- Published by Wiley in Advanced Energy Materials
- Vol. 13 (36)
Thermal Stability of Sulfide Solid Electrolyte with Lithium Metal
All solid–state battery (ASSB) is widely recognized as one of the most promising high‐energy‐density systems/technologies. However, thermal safety issues induced by highly reactive materials still exist for solid electrolytes (SEs). Insights on thermal behaviors at elevated temperatures and the underlying mechanism for thermal stability of SE‐based systems are still missing. Herein, thermal stability performance of typical sulfide SEs is systematically investigated with metal Li, whose order of interfacial thermal stability is concluded to be Li6PS5Cl > Li3PS4 > Li9.54Si1.74P1.44S11.7Cl0.3 > Li4SnS4 > Li7P3S11 after a comprehensive evaluation. Interestingly, Li4SnS4, which achieves good air stability, has poor thermal stability with Li metal. This is possibly caused by Li─Sn alloy products generated during thermal decomposition, and their great thermodynamic driving force towards SE for accelerated thermal runaway. Moreover, electrolytes with poor material‐level thermal stability (e.g., Li7P3S11) may form a dense passivation layer by self‐decomposition with Li metal to retard thermal runaway. Conclusively, the material structure affects the thermodynamic stability of the system, but the reaction products (interphase) affects the kinetic process of the thermal reaction within a certain temperature range. Therefore, thermal stability with both metallic lithium and decomposition products is a necessary condition for interfacial thermal stability of sulfide SEs.
- 7 August 2023
- Published by Wiley in Advanced Energy Materials
- Vol. 13 (36)
Thermal Stability of Sulfide Solid Electrolyte with Lithium Metal
All solid–state battery (ASSB) is widely recognized as one of the most promising high‐energy‐density systems/technologies. However, thermal safety issues induced by highly reactive materials still exist for solid electrolytes (SEs). Insights on thermal behaviors at elevated temperatures and the underlying mechanism for thermal stability of SE‐based systems are still missing. Herein, thermal stability performance of typical sulfide SEs is systematically investigated with metal Li, whose order of interfacial thermal stability is concluded to be Li6PS5Cl > Li3PS4 > Li9.54Si1.74P1.44S11.7Cl0.3 > Li4SnS4 > Li7P3S11 after a comprehensive evaluation. Interestingly, Li4SnS4, which achieves good air stability, has poor thermal stability with Li metal. This is possibly caused by Li─Sn alloy products generated during thermal decomposition, and their great thermodynamic driving force towards SE for accelerated thermal runaway. Moreover, electrolytes with poor material‐level thermal stability (e.g., Li7P3S11) may form a dense passivation layer by self‐decomposition with Li metal to retard thermal runaway. Conclusively, the material structure affects the thermodynamic stability of the system, but the reaction products (interphase) affects the kinetic process of the thermal reaction within a certain temperature range. Therefore, thermal stability with both metallic lithium and decomposition products is a necessary condition for interfacial thermal stability of sulfide SEs.
- Open Access
Improving thermal stability of sulfide solid electrolytes: An intrinsic theoretical paradigm
All‐solid‐state batteries (ASSBs) have been widely acknowledged as the key next‐generation energy storage technology/device, due to their high safety and energy density. Among all solid electrolytes (SEs) that have been studied for ASSBs, sulfide SEs represent the most promising technical route due to their ultra‐high ionic conductivity and desirable mechanical property. However, few results have been reported to study the thermal stability/safety issue of sulfide SEs and ASSBs. Herein, we develop the first‐of‐its‐kind theoretical paradigm and a new conceptual parameter Th to quantitatively calculate/predict the essential thermal stability of sulfide SEs. This theoretical paradigm takes all types of parameters (e.g. crystal structure, localized polyhedra configuration, bond energy, bond type, bond number, normalization factor, and the energy correction factor) into consideration, and more importantly, can be simplified into one straightforward equation for its convenient application in any crystalline systems. To prove its functionality, the typical experimental strategies (stoichiometric ratio control and elemental doping) are adopted for typical sulfide SEs (Li7P3S11, Li3PS4) to improve their thermal stabilities, based on the predictions obtained from the derived theory and equation. Moreover, the potential doping elements to improve thermal stability of sulfide SEs are screened throughout the whole periodic table, and the theoretically predicted trends correspond well with experimental evidence. This work may represent the most critical breakthroughs in the research field of thermal stability for sulfide SEs, not only because it fills the gap of this field, but also due to its precise and quantitative prediction based on a complete consideration of all parameters that determine their thermal stabilities. The handy model developed herein can also be applied to any crystalline materials. image
Open AccessImproving thermal stability of sulfide solid electrolytes: An intrinsic theoretical paradigm
All‐solid‐state batteries (ASSBs) have been widely acknowledged as the key next‐generation energy storage technology/device, due to their high safety and energy density. Among all solid electrolytes (SEs) that have been studied for ASSBs, sulfide SEs represent the most promising technical route due to their ultra‐high ionic conductivity and desirable mechanical property. However, few results have been reported to study the thermal stability/safety issue of sulfide SEs and ASSBs. Herein, we develop the first‐of‐its‐kind theoretical paradigm and a new conceptual parameter Th to quantitatively calculate/predict the essential thermal stability of sulfide SEs. This theoretical paradigm takes all types of parameters (e.g. crystal structure, localized polyhedra configuration, bond energy, bond type, bond number, normalization factor, and the energy correction factor) into consideration, and more importantly, can be simplified into one straightforward equation for its convenient application in any crystalline systems. To prove its functionality, the typical experimental strategies (stoichiometric ratio control and elemental doping) are adopted for typical sulfide SEs (Li7P3S11, Li3PS4) to improve their thermal stabilities, based on the predictions obtained from the derived theory and equation. Moreover, the potential doping elements to improve thermal stability of sulfide SEs are screened throughout the whole periodic table, and the theoretically predicted trends correspond well with experimental evidence. This work may represent the most critical breakthroughs in the research field of thermal stability for sulfide SEs, not only because it fills the gap of this field, but also due to its precise and quantitative prediction based on a complete consideration of all parameters that determine their thermal stabilities. The handy model developed herein can also be applied to any crystalline materials. image
- Open Access
Front Cover Image
The highly flammable and volatile organic liquid electrolytes in commercial LIBs (green battery) suffers from serious thermal problems. Substituting liquid electrolytes with solid‐state electrolyte (SE) is a promising solution. This review summarizes thermal stability of all solid‐state battery from the aspects of SE materials, SE‐electrode interface and battery device. The five balls represent different SE materials, including polymer, oxide, sulfide, halide and hydride. The clapboard above the five balls represents the interface between SE and electrode. Above the clapboard, thermal stability of battery device (blue battery) still needs to be explored in the future. (DOI: 10.1002/inf2.12224) image
Open AccessFront Cover Image
The highly flammable and volatile organic liquid electrolytes in commercial LIBs (green battery) suffers from serious thermal problems. Substituting liquid electrolytes with solid‐state electrolyte (SE) is a promising solution. This review summarizes thermal stability of all solid‐state battery from the aspects of SE materials, SE‐electrode interface and battery device. The five balls represent different SE materials, including polymer, oxide, sulfide, halide and hydride. The clapboard above the five balls represents the interface between SE and electrode. Above the clapboard, thermal stability of battery device (blue battery) still needs to be explored in the future. (DOI: 10.1002/inf2.12224) image
- Open Access
Progress in thermal stability of all‐solid‐state‐Li‐ion‐batteries
Thermal safety is one of the major issues for lithium‐ion batteries (LIBs) used in electric vehicles. The thermal runaway mechanism and process of LIBs have been extensively studied, but the thermal problems of LIBs remain intractable due to the flammability, volatility and corrosiveness of organic liquid electrolytes. To ultimately solve the thermal problem, all‐solid‐state LIBs (ASSLIBs) are considered to be the most promising technology. However, research on the thermal stability of solid‐state electrolytes (SEs) is still in its initial stage, and the thermal safety of ASSLIBs still needs further validation. Moreover, the specified reviews summarizing the thermal stability of ASSLIBs and all types of SEs are still missing. To fill this gap, this review systematically discussed recent progress in the field of thermal properties investigation for ASSLIBs, form levels of materials and interface to the whole battery. The thermal properties of three major types of SEs, including polymer, oxide, and sulfide SEs are systematically reviewed here. This review aims to provide a comprehensive understanding of the thermal stability of SEs for the benign development of ASSLIBs and their promising application under practical operating conditions. image
Open AccessProgress in thermal stability of all‐solid‐state‐Li‐ion‐batteries
Thermal safety is one of the major issues for lithium‐ion batteries (LIBs) used in electric vehicles. The thermal runaway mechanism and process of LIBs have been extensively studied, but the thermal problems of LIBs remain intractable due to the flammability, volatility and corrosiveness of organic liquid electrolytes. To ultimately solve the thermal problem, all‐solid‐state LIBs (ASSLIBs) are considered to be the most promising technology. However, research on the thermal stability of solid‐state electrolytes (SEs) is still in its initial stage, and the thermal safety of ASSLIBs still needs further validation. Moreover, the specified reviews summarizing the thermal stability of ASSLIBs and all types of SEs are still missing. To fill this gap, this review systematically discussed recent progress in the field of thermal properties investigation for ASSLIBs, form levels of materials and interface to the whole battery. The thermal properties of three major types of SEs, including polymer, oxide, and sulfide SEs are systematically reviewed here. This review aims to provide a comprehensive understanding of the thermal stability of SEs for the benign development of ASSLIBs and their promising application under practical operating conditions. image