Hasan Bayındır
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hasan Bayındır has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Hüseyin Aydın
Department of Mechanical Engineering, Thermodynamics, Batman University, Batman, Turkey
7 shared publications Mehmet Zerrakki Işık
2 shared publicationsBahattin İscan
1 shared publicationC. İlkiliç
Department of Automotive, Faculty of Technical Education , Firat University , Elaziğ, Turkey
1 shared publicationH. S. Yücesu
Department of Automotive, Faculty of Technical Education , Gazi University , Ankara , Turkey
1 shared publicationHalit Lütfü Yücel
1 shared publication
Latest Publications
- Open Access
- 30 December 2024
- Published by Dicle University in Dicle Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 13 (2) , 177-196
İkinci Dereceden Bir Transfer Fonksiyonu Kullanılarak Elektrikli Araç Bataryalarının Modellenmesi
Son yıllarda, küresel ısınma ve fosil yakıt kaynaklarının hızla azalması nedeniyle yenilenebilir enerji kaynaklarının kullanımında artış gözlenmektedir. Bu bağlamda, araştırmacılar, bilim insanları ve hükümetler tarafından elektrikli ve hibrit araçlar büyük ilgi görmektedir. Elektrikli araçların temel bileşenlerinden biri güç bataryasıdır. Elektrikli araçların karşılaştığı en büyük zorluk, verimli sürüş, hızlı şarj olabilme ve uzun menzil sunabilen uygun bir enerji depolama cihazı bulmaktır. Mevcut teknolojiye göre, elektrikli araçların enerji kaynakları arasında lityum polimer piller, nikel metal hibrit piller ve lityum iyon piller yaygındır. Lityum iyon piller, yüksek enerji yoğunluğu, uzun ömür, hafiflik, düşük deşarj oranı, uygun maliyet ve hafıza etkisi olmaması gibi birçok avantaja sahiptir. Ayrıca, lityum iyon piller, zararlı emisyon üretmeyen çevre dostu malzemelerden yapılmıştır ve yüksek güvenlik sunar. Ancak, bu pilleri tasarlamak ve davranışlarını tahmin etmek hala tam olarak çözülememiş bir mühendislik sorunudur. Bu çalışmada, elektrikli araçlarda kullanılan lityum iyon pillerin davranışını tahmin etmek için basit ve etkili bir yaklaşım olan ikinci dereceden transfer fonksiyonu yaklaşımı kullanılmıştır. Sonuçlar, önerilen yaklaşımın olumlu sonuçlar verdiği termal eşdeğer devre modellemesiyle karşılaştırılmıştır. Önerilen yöntemin ana avantajlarından biri, hesaplama belleğine olan ihtiyacı azaltmasıdır. Bu durum, basitleştirilmiş modelin elektrikli araçların enerji depolama sistemlerinin verimliliği, performansı ve güvenliğini çeşitli işletme koşullarında iyileştirmek için kullanılmasına olanak tanır.
- 30 December 2024
- Published by Dicle University in Dicle Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 13 (2) , 177-196
Open Accessİkinci Dereceden Bir Transfer Fonksiyonu Kullanılarak Elektrikli Araç Bataryalarının Modellenmesi
Son yıllarda, küresel ısınma ve fosil yakıt kaynaklarının hızla azalması nedeniyle yenilenebilir enerji kaynaklarının kullanımında artış gözlenmektedir. Bu bağlamda, araştırmacılar, bilim insanları ve hükümetler tarafından elektrikli ve hibrit araçlar büyük ilgi görmektedir. Elektrikli araçların temel bileşenlerinden biri güç bataryasıdır. Elektrikli araçların karşılaştığı en büyük zorluk, verimli sürüş, hızlı şarj olabilme ve uzun menzil sunabilen uygun bir enerji depolama cihazı bulmaktır. Mevcut teknolojiye göre, elektrikli araçların enerji kaynakları arasında lityum polimer piller, nikel metal hibrit piller ve lityum iyon piller yaygındır. Lityum iyon piller, yüksek enerji yoğunluğu, uzun ömür, hafiflik, düşük deşarj oranı, uygun maliyet ve hafıza etkisi olmaması gibi birçok avantaja sahiptir. Ayrıca, lityum iyon piller, zararlı emisyon üretmeyen çevre dostu malzemelerden yapılmıştır ve yüksek güvenlik sunar. Ancak, bu pilleri tasarlamak ve davranışlarını tahmin etmek hala tam olarak çözülememiş bir mühendislik sorunudur. Bu çalışmada, elektrikli araçlarda kullanılan lityum iyon pillerin davranışını tahmin etmek için basit ve etkili bir yaklaşım olan ikinci dereceden transfer fonksiyonu yaklaşımı kullanılmıştır. Sonuçlar, önerilen yaklaşımın olumlu sonuçlar verdiği termal eşdeğer devre modellemesiyle karşılaştırılmıştır. Önerilen yöntemin ana avantajlarından biri, hesaplama belleğine olan ihtiyacı azaltmasıdır. Bu durum, basitleştirilmiş modelin elektrikli araçların enerji depolama sistemlerinin verimliliği, performansı ve güvenliğini çeşitli işletme koşullarında iyileştirmek için kullanılmasına olanak tanır.
- 1 April 2017
- Published by Elsevier in Journal of the Energy Institute
- Vol. 90 (2) , 174-184
The effect of n-butanol additive on low load combustion, performance and emissions of biodiesel-diesel blend in a heavy duty diesel power generator
- 1 April 2017
- Published by Elsevier in Journal of the Energy Institute
- Vol. 90 (2) , 174-184
The effect of n-butanol additive on low load combustion, performance and emissions of biodiesel-diesel blend in a heavy duty diesel power generator
- 1 March 2017
- Published by Elsevier in Applied Thermal Engineering
- Vol. 114, 234-244
Evaluation of combustion, performance and emission indicators of canola oil-kerosene blends in a power generator diesel engine
- 1 March 2017
- Published by Elsevier in Applied Thermal Engineering
- Vol. 114, 234-244
Evaluation of combustion, performance and emission indicators of canola oil-kerosene blends in a power generator diesel engine
- 20 October 2010
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 33 (2) , 130-137
Emissions From an Engine Fueled With Biodiesel-kerosene Blends
Biofuels are renewable energy sources for internal combustion engines and they have low emissions. They are increasingly used as an alternative to petroleum fuels. In this work, three different fuel types, such as commercial diesel fuel (D2), 20% biodiesel and 80% diesel fuel called here as B20, and 80% biodiesel and 20% kerosene, called here as BK20, were used in a single cylinder, four stroke, direct injection compression ignition engine. Kerosene was used as an additive to approach the properties of biodiesel to D2. The effects of the blends on CO, NOx, and smoke emissions as well as on some of the performance parameter of the engine were investigated. The prepared fuel, BK20 blend, has almost the same fuel properties as conventional diesel fuel. The experimental results showed that the exhaust emissions for BK20 were fairly reduced as compared to diesel fuel as well as B20. Besides, the performance of CI engine was improved with the use of the BK20, especially in comparison to B20. Results suggest that the BK20 can be substituted to the petroleum-based diesel fuel in diesel engines.
- 20 October 2010
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 33 (2) , 130-137
Emissions From an Engine Fueled With Biodiesel-kerosene Blends
Biofuels are renewable energy sources for internal combustion engines and they have low emissions. They are increasingly used as an alternative to petroleum fuels. In this work, three different fuel types, such as commercial diesel fuel (D2), 20% biodiesel and 80% diesel fuel called here as B20, and 80% biodiesel and 20% kerosene, called here as BK20, were used in a single cylinder, four stroke, direct injection compression ignition engine. Kerosene was used as an additive to approach the properties of biodiesel to D2. The effects of the blends on CO, NOx, and smoke emissions as well as on some of the performance parameter of the engine were investigated. The prepared fuel, BK20 blend, has almost the same fuel properties as conventional diesel fuel. The experimental results showed that the exhaust emissions for BK20 were fairly reduced as compared to diesel fuel as well as B20. Besides, the performance of CI engine was improved with the use of the BK20, especially in comparison to B20. Results suggest that the BK20 can be substituted to the petroleum-based diesel fuel in diesel engines.
- 5 October 2010
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 33 (1) , 49-56
The Effects of λ and ∊ on Engine Performance and Exhaust Emissions Using Ethanol–unleaded Gasoline Blends in an SI Engine
In this study, the effect of relative air-fuel ratio (λ) and compression ratio (∊) on engine performance and exhaust emissions was experimentally investigated. The experiments were performed by varying ethanol–unleaded gasoline blends as E0 (100% unleaded gasoline), E10 (10% ethanol and 90% gasoline blend), E30 (30% ethanol and 70% gasoline blend), and E85 (85% ethanol and 15% gasoline blend). In experiments, first the effects of ethanol–unleaded gasoline blends on engine performance and exhaust emissions at 0.931, 1, and 1.069 λ values were clarified. Second, tests were carried out with compression ratios of 7:1, 9:1, and 11:1. The results indicated that the relative air-fuel ratio and ethanol content play an important role in reducing CO (carbon monoxide emissions) and HC (hydrocarbon) emissions. Results also showed that the engine power was slightly decreased, especially at higher engine speeds. A probable knocking phenomenon did not occur with the increase of compression ratio because of a higher octane number of ethanol–unleaded gasoline blends.
- 5 October 2010
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 33 (1) , 49-56
The Effects of λ and ∊ on Engine Performance and Exhaust Emissions Using Ethanol–unleaded Gasoline Blends in an SI Engine
In this study, the effect of relative air-fuel ratio (λ) and compression ratio (∊) on engine performance and exhaust emissions was experimentally investigated. The experiments were performed by varying ethanol–unleaded gasoline blends as E0 (100% unleaded gasoline), E10 (10% ethanol and 90% gasoline blend), E30 (30% ethanol and 70% gasoline blend), and E85 (85% ethanol and 15% gasoline blend). In experiments, first the effects of ethanol–unleaded gasoline blends on engine performance and exhaust emissions at 0.931, 1, and 1.069 λ values were clarified. Second, tests were carried out with compression ratios of 7:1, 9:1, and 11:1. The results indicated that the relative air-fuel ratio and ethanol content play an important role in reducing CO (carbon monoxide emissions) and HC (hydrocarbon) emissions. Results also showed that the engine power was slightly decreased, especially at higher engine speeds. A probable knocking phenomenon did not occur with the increase of compression ratio because of a higher octane number of ethanol–unleaded gasoline blends.
- 13 April 2010
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 32 (12) , 1076-1085
An Experimental Study on the Exhaust Emissions of a Partially Loaded Compressed Ignition Engine Fueled with Biodiesel Derived from Cottonseed Oil
The world energy demand is increasing rapidly due to the excessive use of the fuels but because of limited reserves, the researchers are now looking for alternative fuels. Another serious problem associated with the use of petroleum fuel is the increase in pollutants emissions. In this study, cottonseed oil methyl ester was added to diesel fuel by volume of 5% (B5), 20% (B20), and 50% (B50). Blends were used in a single cylinder, direct injection, air-cooled diesel engine at partial and full load condition. In experiments, the effects of cottonseed oil methyl ester ester-diesel fuel blend on the engine fuel consumption and exhaust emissions were investigated at 2,000 rpm of engine speed that most engines run on. At the tests, the effect of blends on fuel consumption, exhaust gases temperature, CO, NOx, SO2, and smoke opacity was clarified. The experimental results showed that cottonseed oil methyl ester can be substituted for the diesel fuel without any modifications in diesel engines.
- 13 April 2010
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 32 (12) , 1076-1085
An Experimental Study on the Exhaust Emissions of a Partially Loaded Compressed Ignition Engine Fueled with Biodiesel Derived from Cottonseed Oil
The world energy demand is increasing rapidly due to the excessive use of the fuels but because of limited reserves, the researchers are now looking for alternative fuels. Another serious problem associated with the use of petroleum fuel is the increase in pollutants emissions. In this study, cottonseed oil methyl ester was added to diesel fuel by volume of 5% (B5), 20% (B20), and 50% (B50). Blends were used in a single cylinder, direct injection, air-cooled diesel engine at partial and full load condition. In experiments, the effects of cottonseed oil methyl ester ester-diesel fuel blend on the engine fuel consumption and exhaust emissions were investigated at 2,000 rpm of engine speed that most engines run on. At the tests, the effect of blends on fuel consumption, exhaust gases temperature, CO, NOx, SO2, and smoke opacity was clarified. The experimental results showed that cottonseed oil methyl ester can be substituted for the diesel fuel without any modifications in diesel engines.
- 8 March 2010
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 32 (10) , 901-908
The Effects of Cottonseed Oil–Kerosene Blends on a Diesel Engine Performance and Exhaust Emissions
Nowadays, increasing crude oil prices and environmental pollution problems have lead to investigation of alternative fuel necessities, such as vegetable oils for internal combustion engines. This article presents the possibility of using cottonseed oil-kerosene blends in compression ignition engines. Engine performance and exhaust emissions were examined and diesel fuel was used as a basis for comparison. The influences of using various blended cottonseed oil-kerosenes on brake specific fuel consumption, exhaust gas temperature, and exhaust emissions values were investigated. Experimental results indicated that engine performance and brake specific fuel consumption were slightly different and SOx emissions were remarkably different from diesel fuel usage.
- 8 March 2010
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 32 (10) , 901-908
The Effects of Cottonseed Oil–Kerosene Blends on a Diesel Engine Performance and Exhaust Emissions
Nowadays, increasing crude oil prices and environmental pollution problems have lead to investigation of alternative fuel necessities, such as vegetable oils for internal combustion engines. This article presents the possibility of using cottonseed oil-kerosene blends in compression ignition engines. Engine performance and exhaust emissions were examined and diesel fuel was used as a basis for comparison. The influences of using various blended cottonseed oil-kerosenes on brake specific fuel consumption, exhaust gas temperature, and exhaust emissions values were investigated. Experimental results indicated that engine performance and brake specific fuel consumption were slightly different and SOx emissions were remarkably different from diesel fuel usage.
- Top Cited Papers
- 1 March 2010
- Published by Elsevier in Renewable Energy
- Vol. 35 (3) , 588-592
Performance and emission analysis of cottonseed oil methyl ester in a diesel engine
- 1 March 2010
- Published by Elsevier in Renewable Energy
- Vol. 35 (3) , 588-592
Top Cited PapersPerformance and emission analysis of cottonseed oil methyl ester in a diesel engine