Inga Lasenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Inga Lasenko has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Jaymin Vrajlal Sanchaniya
Institute of Mechanical and Biomedical Engineering, Riga Technical University, Ķīpsalas iela 6A, LV-1048 Rīga, Latvia
13 shared publications - Sai Pavan Kanukuntla
Mechanics and Biotextile Research Laboratory, Riga Technical University, 3/3-20 Pulka Street, LV-1007 Riga, Latvia
5 shared publications - Valters Gobins
Laboratory of Environmental Genetics, Institute of Biology, Faculty of Biology, Latvian University, Jelgavas Street 1, LV-1004 Riga, Latvia
5 shared publications - Andrejs Krasnikovs
Mechanical and Biomedical Engineering Institute, Riga Technical University, Kipsalas Street 6A, LV-1048 Riga, Latvia
4 shared publications - Arta Viluma-Gudmona
Mechanics and Biotextile Research Laboratory, Riga Technical University, 3/3-20 Pulka Street, LV-1007 Riga, Latvia
4 shared publications - Olga Kononova
Mechanical and Biomedical Engineering Institute, Riga Technical University, Kipsalas Street 6A, LV-1048 Riga, Latvia
4 shared publications
Latest Publications
- Open Access
The Effect of CO2 Laser Treatment on the Composition of Cotton/Polyester/Metal Fabric
The effect of CO2 laser treatment on the surface composition and properties of a woven fabric (polyester (PET) fiber (59 wt%)/cotton (CO) fiber (31 wt%)/stainless-steel (SS) metal fibers (10 wt%)) was investigated across a range of laser intensities (19.1 × 106 to 615.0 × 106 W/m2). Elemental analysis using wavelength-dispersive X-ray fluorescence (WD-XRF) revealed that for an intensity up to 225.4 × 106 W/m2, the carbon content on the fabric surface increased while the oxygen content decreased, indicating thermally induced surface modification. Fourier transform infrared (FT-IR) spectroscopy confirmed that no new chemical bonds were formed, suggesting that the changes observed were predominantly physical in nature. High-resolution scanning electron microscopy (HR-SEM) showed progressive fiber fusion and surface smoothing with increasing laser intensity, consistent with polyester melting. Tensile testing demonstrated a significant decline in peak load and elongation at peak load with rising laser fluence, indicating mechanical embrittlement. Overall, CO2 laser treatment alters the morphology and elemental composition of the fabric surface without inducing major chemical decomposition, markedly reducing its mechanical strength.
Open AccessThe Effect of CO2 Laser Treatment on the Composition of Cotton/Polyester/Metal Fabric
The effect of CO2 laser treatment on the surface composition and properties of a woven fabric (polyester (PET) fiber (59 wt%)/cotton (CO) fiber (31 wt%)/stainless-steel (SS) metal fibers (10 wt%)) was investigated across a range of laser intensities (19.1 × 106 to 615.0 × 106 W/m2). Elemental analysis using wavelength-dispersive X-ray fluorescence (WD-XRF) revealed that for an intensity up to 225.4 × 106 W/m2, the carbon content on the fabric surface increased while the oxygen content decreased, indicating thermally induced surface modification. Fourier transform infrared (FT-IR) spectroscopy confirmed that no new chemical bonds were formed, suggesting that the changes observed were predominantly physical in nature. High-resolution scanning electron microscopy (HR-SEM) showed progressive fiber fusion and surface smoothing with increasing laser intensity, consistent with polyester melting. Tensile testing demonstrated a significant decline in peak load and elongation at peak load with rising laser fluence, indicating mechanical embrittlement. Overall, CO2 laser treatment alters the morphology and elemental composition of the fabric surface without inducing major chemical decomposition, markedly reducing its mechanical strength.
- Open Access
Advances in CO2 Laser Treatment of Cotton-Based Textiles: Processing Science and Functional Applications
CO2 laser processing has emerged as an efficient dry-finishing technique capable of inducing controlled chemical and morphological transformations in cotton and denim textiles. The strong mid-infrared absorption of cellulose enables localised photothermal heating, leading to selective dye decomposition, surface oxidation, and micro-scale ablation while largely preserving the bulk fabric structure. These laser-driven mechanisms modify colour, surface chemistry, and topography in a predictable, parameter-dependent manner. Low-fluence conditions predominantly produce uniform fading through fragmentation and oxidation of indigo dye; in comparison, moderate thermal loads promote the formation of carbonyl and carboxyl groups that increase surface energy and enhance wettability. Higher fluence regimes generate micro-textured regions with increased roughness and anchoring capacity, enabling improved adhesion of dyes, coatings, and nanoparticles. Compared with conventional wet processes, CO2 laser treatment eliminates chemical effluents, strongly reduces water consumption and supports digitally controlled, Industry 4.0-compatible manufacturing workflows. Despite its advantages, challenges remain in standardising processing parameters, quantifying oxidation depth, modelling thermal behaviour, and assessing the long-term stability of functionalised surfaces under real usage conditions. In this review, we consolidate current knowledge on the mechanistic pathways, processing windows, and functional potential of CO2 laser-modified cotton substrates. By integrating findings from recent studies and identifying critical research gaps, the review supports the development of predictable, scalable, and sustainable laser-based cotton textile processing technologies.
Open AccessAdvances in CO2 Laser Treatment of Cotton-Based Textiles: Processing Science and Functional Applications
CO2 laser processing has emerged as an efficient dry-finishing technique capable of inducing controlled chemical and morphological transformations in cotton and denim textiles. The strong mid-infrared absorption of cellulose enables localised photothermal heating, leading to selective dye decomposition, surface oxidation, and micro-scale ablation while largely preserving the bulk fabric structure. These laser-driven mechanisms modify colour, surface chemistry, and topography in a predictable, parameter-dependent manner. Low-fluence conditions predominantly produce uniform fading through fragmentation and oxidation of indigo dye; in comparison, moderate thermal loads promote the formation of carbonyl and carboxyl groups that increase surface energy and enhance wettability. Higher fluence regimes generate micro-textured regions with increased roughness and anchoring capacity, enabling improved adhesion of dyes, coatings, and nanoparticles. Compared with conventional wet processes, CO2 laser treatment eliminates chemical effluents, strongly reduces water consumption and supports digitally controlled, Industry 4.0-compatible manufacturing workflows. Despite its advantages, challenges remain in standardising processing parameters, quantifying oxidation depth, modelling thermal behaviour, and assessing the long-term stability of functionalised surfaces under real usage conditions. In this review, we consolidate current knowledge on the mechanistic pathways, processing windows, and functional potential of CO2 laser-modified cotton substrates. By integrating findings from recent studies and identifying critical research gaps, the review supports the development of predictable, scalable, and sustainable laser-based cotton textile processing technologies.
- Open Access
Layer-by-Layer Integration of Electrospun Nanofibers in FDM 3D Printing for Hierarchical Composite Fabrication
This study presents a novel integrated manufacturing approach that combines fused deposition modeling (FDM) 3D printing with in situ electrospinning to fabricate hierarchical composite structures composed of polylactic acid (PLA) reinforced with polyacrylonitrile (PAN) nanofibers. A mounting fixture was employed to enable layer-by-layer nanofiber deposition directly onto printed PLA layers in a continuous automated process, eliminating the need for prefabricated electrospun nanofiber mats. The influences of nozzle temperature (210–230 °C) and electrospinning time (5–15 min per layer) on mechanical, thermal, and morphological properties were systematically investigated. Optimal performance was achieved at an FDM nozzle temperature of 220 °C with 5 min of electrospinning time (sample E1), showing a 36.5% increase in tensile strength (71 MPa), a 33.3% increase in Young’s modulus (2.8 GPa), and a 62.0% increase in flexural strength (128 MPa) compared with the neat PLA. This enhancement resulted from the complete infiltration of molten PLA into the thin nanofiber mats, creating true fiber–matrix integration. Excessive nanofiber content (15 min ES) caused a 36.5% reduction in strength due to delamination and incomplete infiltration. Thermal analysis revealed a decrease in glass transition temperature (1.2 °C) and onset of thermal degradation (5.3–15.2 °C) with nanofiber integration. Fracture morphology confirmed that to achieve optimal properties, it was critical to balance the nanofiber reinforcement content with the depth of infiltration, as excessive content created poorly bonded interleaved layers. This integrated fabrication platform enables the production of lightweight hierarchical composites with multiscale, custom-made reinforcement for applications in biomedical scaffolds, protective equipment, and structural components.
Open AccessLayer-by-Layer Integration of Electrospun Nanofibers in FDM 3D Printing for Hierarchical Composite Fabrication
This study presents a novel integrated manufacturing approach that combines fused deposition modeling (FDM) 3D printing with in situ electrospinning to fabricate hierarchical composite structures composed of polylactic acid (PLA) reinforced with polyacrylonitrile (PAN) nanofibers. A mounting fixture was employed to enable layer-by-layer nanofiber deposition directly onto printed PLA layers in a continuous automated process, eliminating the need for prefabricated electrospun nanofiber mats. The influences of nozzle temperature (210–230 °C) and electrospinning time (5–15 min per layer) on mechanical, thermal, and morphological properties were systematically investigated. Optimal performance was achieved at an FDM nozzle temperature of 220 °C with 5 min of electrospinning time (sample E1), showing a 36.5% increase in tensile strength (71 MPa), a 33.3% increase in Young’s modulus (2.8 GPa), and a 62.0% increase in flexural strength (128 MPa) compared with the neat PLA. This enhancement resulted from the complete infiltration of molten PLA into the thin nanofiber mats, creating true fiber–matrix integration. Excessive nanofiber content (15 min ES) caused a 36.5% reduction in strength due to delamination and incomplete infiltration. Thermal analysis revealed a decrease in glass transition temperature (1.2 °C) and onset of thermal degradation (5.3–15.2 °C) with nanofiber integration. Fracture morphology confirmed that to achieve optimal properties, it was critical to balance the nanofiber reinforcement content with the depth of infiltration, as excessive content created poorly bonded interleaved layers. This integrated fabrication platform enables the production of lightweight hierarchical composites with multiscale, custom-made reinforcement for applications in biomedical scaffolds, protective equipment, and structural components.
- Open Access
Influence of Perforation on Elastic Modulus and Shear Modulus of Lightweight Thin-Walled Cylindrical Shells
Perforated cylindrical shaped metal plates are used with high efficiency in the manufacture of deflectors, components of cooling systems, wind tunnels, climatic chambers, filters, and cylindrical implants. This is particularly important for lightweight cylindrical structures, where even minor changes in stiffness can affect structural strength. One of the most important parameters determining the mechanical behavior of such structures is the effective elastic modulus of the perforated element which characterizes its resistance to deformation. The research involves plates made of stainless steel 304 alloy, where perforations were created using the laser-cutting method. The cylindrical shape of the samples with height 50 mm, thickness 1 mm, and diameter 48 mm of each specimen was obtained using metal rolling and welding techniques. To determine the effective elastic modulus, a non-destructive material property evaluation method was applied by solving an inverse problem. In this research, resonance frequencies were determined using a laser vibrometer and a full factorial experimental plan was developed. Physical samples were digitized into 3D models using 3D scanning technology. To evaluate the accuracy of the applied finite element numerical model, its convergence analysis was performed. Numerical results were approximated using the least-squares method, while the effective elastic modulus was calculated by formulating and minimizing the error functional between experimental and numerical eigenfrequencies. The results indicate that increasing the relative perforation area from 0% to 50.24% leads to a decrease in the effective elastic modulus from 184.76 GPa to 50.69 GPa, confirming that increasing the perforation area in a stainless steel 304 cylinder reduces its elastic properties. The observed reduction in resonance frequencies and elastic properties is primarily due to the stiffness decrease caused by the higher perforation volume.
Open AccessInfluence of Perforation on Elastic Modulus and Shear Modulus of Lightweight Thin-Walled Cylindrical Shells
Perforated cylindrical shaped metal plates are used with high efficiency in the manufacture of deflectors, components of cooling systems, wind tunnels, climatic chambers, filters, and cylindrical implants. This is particularly important for lightweight cylindrical structures, where even minor changes in stiffness can affect structural strength. One of the most important parameters determining the mechanical behavior of such structures is the effective elastic modulus of the perforated element which characterizes its resistance to deformation. The research involves plates made of stainless steel 304 alloy, where perforations were created using the laser-cutting method. The cylindrical shape of the samples with height 50 mm, thickness 1 mm, and diameter 48 mm of each specimen was obtained using metal rolling and welding techniques. To determine the effective elastic modulus, a non-destructive material property evaluation method was applied by solving an inverse problem. In this research, resonance frequencies were determined using a laser vibrometer and a full factorial experimental plan was developed. Physical samples were digitized into 3D models using 3D scanning technology. To evaluate the accuracy of the applied finite element numerical model, its convergence analysis was performed. Numerical results were approximated using the least-squares method, while the effective elastic modulus was calculated by formulating and minimizing the error functional between experimental and numerical eigenfrequencies. The results indicate that increasing the relative perforation area from 0% to 50.24% leads to a decrease in the effective elastic modulus from 184.76 GPa to 50.69 GPa, confirming that increasing the perforation area in a stainless steel 304 cylinder reduces its elastic properties. The observed reduction in resonance frequencies and elastic properties is primarily due to the stiffness decrease caused by the higher perforation volume.
- Open Access
- 8 June 2025
- Published by Riga Technical University in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
- Vol. 4, 169-180
MECHANICAL AND MORPHOLOGICAL PROPERTIES OF PP/PE COMPOSITE FISHING NET ROPES
This study examined how the extrusion process, which is affected by different thermal settings, and the raw material sources, composed of various polypropylene (PP) and polyethylene (PE) blends with or without calcium carbonate (CaCO3) additives, influence the quality and mechanical properties, such as tensile strength, elongation, and stiffness, of composite ropes for fishing net production. A comparative analysis of extrusion process parameters was conducted among four distinct extruders from the Promatech, Miyachi, Sima, and Ichikawa companies with a focus on their thermal settings, characterized by varying the temperature profiles. The investigation was extended to the utilization of PP derived from different sources and granule compositions, including formulations with CaCO3 additives. In terms of breaking force, the samples with CaCO3 showed an average increase of 5.2% when compared to those without CaCO3. With the addition of CaCO3, the elongation at break increased by an average of 8.7%. The addition of CaCO3, surprisingly, resulted in a slight decrease in stiffness, averaging a decrease of 2.1% when compared to the samples without CaCO3. Most significantly, the addition of CaCO3 resulted in a significant decrease in Young's modulus, with an average reduction of approximately 66.4% compared to the samples without CaCO3. This study reveals substantial differences in rope mechanical quality due to variations in raw materials and extrusion parameters, emphasizing the need for adapting the manufacturing process to consistently produce high-quality composite ropes for knitting fishing nets.
- 8 June 2025
- Published by Riga Technical University in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
- Vol. 4, 169-180
Open AccessMECHANICAL AND MORPHOLOGICAL PROPERTIES OF PP/PE COMPOSITE FISHING NET ROPES
This study examined how the extrusion process, which is affected by different thermal settings, and the raw material sources, composed of various polypropylene (PP) and polyethylene (PE) blends with or without calcium carbonate (CaCO3) additives, influence the quality and mechanical properties, such as tensile strength, elongation, and stiffness, of composite ropes for fishing net production. A comparative analysis of extrusion process parameters was conducted among four distinct extruders from the Promatech, Miyachi, Sima, and Ichikawa companies with a focus on their thermal settings, characterized by varying the temperature profiles. The investigation was extended to the utilization of PP derived from different sources and granule compositions, including formulations with CaCO3 additives. In terms of breaking force, the samples with CaCO3 showed an average increase of 5.2% when compared to those without CaCO3. With the addition of CaCO3, the elongation at break increased by an average of 8.7%. The addition of CaCO3, surprisingly, resulted in a slight decrease in stiffness, averaging a decrease of 2.1% when compared to the samples without CaCO3. Most significantly, the addition of CaCO3 resulted in a significant decrease in Young's modulus, with an average reduction of approximately 66.4% compared to the samples without CaCO3. This study reveals substantial differences in rope mechanical quality due to variations in raw materials and extrusion parameters, emphasizing the need for adapting the manufacturing process to consistently produce high-quality composite ropes for knitting fishing nets.
- Open Access
- 8 June 2025
- Published by Riga Technical University in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
- Vol. 4, 383-387
STRENGTHENING INTERFACIAL BONDING IN NANOFIBRE LAMINATED TEXTILE COMPOSITES
Textiles that use electrospun nanofibre membranes (ENMs) in laminated configurations recently achieved substantial progress in three application areas, including robotic skins, electronic sensors, and medical textiles. Research evaluates nanofibre-laminated textile bonding strength by using multiple experimental methods. The study presents the development of three different textile composites in which polyacrylonitrile (PAN) polymer was treated with electrospinning on fabric through various adhesive techniques. The testing evaluates the different nanofibre-fabric bonding methods using T-peel tests to determine their effectiveness. The direct electrospinning methods used to produce laminated textiles led to negligible or no attachment between fabric materials and ENMs. The electrospinning process led to initial ENM layer adhesion when an adhesion agent was incorporated during the process. The tested composite achieved a 60% higher strength after using adhesive pressure to create it. Research findings show that applying an adhesive agent with pressure between textile materials and ENMs produces optimal interfacial adhesion during the fabrication of laminated textile composites.
- 8 June 2025
- Published by Riga Technical University in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
- Vol. 4, 383-387
Open AccessSTRENGTHENING INTERFACIAL BONDING IN NANOFIBRE LAMINATED TEXTILE COMPOSITES
Textiles that use electrospun nanofibre membranes (ENMs) in laminated configurations recently achieved substantial progress in three application areas, including robotic skins, electronic sensors, and medical textiles. Research evaluates nanofibre-laminated textile bonding strength by using multiple experimental methods. The study presents the development of three different textile composites in which polyacrylonitrile (PAN) polymer was treated with electrospinning on fabric through various adhesive techniques. The testing evaluates the different nanofibre-fabric bonding methods using T-peel tests to determine their effectiveness. The direct electrospinning methods used to produce laminated textiles led to negligible or no attachment between fabric materials and ENMs. The electrospinning process led to initial ENM layer adhesion when an adhesion agent was incorporated during the process. The tested composite achieved a 60% higher strength after using adhesive pressure to create it. Research findings show that applying an adhesive agent with pressure between textile materials and ENMs produces optimal interfacial adhesion during the fabrication of laminated textile composites.
- Open Access
- 8 June 2025
- Published by Riga Technical University in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
- Vol. 4, 375-382
EFFECT OF INFILL PATTERN DESIGN ON TENSILE STRENGTH OF FUSED DEPOSITION MODELLED SPECIMENS
Deep knowledge of the connections between additive manufacturing design elements and the mechanical qualities of additive manufactured products becomes essential as the adoption of technology expands. Research analyses how the arrangement of material inside the printed object affects the tensile strength in specimens made through fused deposition modelling. The evaluation of 18 different infill patterns occurred through standardised tests, while technicians maintained identical processing parameters that included print temperature and both layer height and print speed. The test specimens underwent tensile testing for mechanical analysis. The test results indicate that the concentric pattern delivers maximum elastic modulus values at 1078 MPa, as well as a maximum tensile strength of 26.4 MPa which exceeds other patterns by 12-62% for modulus and 24-98% for strength. The elongation-at-break measurement of 10.5% is the best result for this pattern because it offers 10-338% more flexibility than competing structures. The elastic modulus (665 MPa) and the tensile strength (13.3 MPa) of the lightning pattern are the minimum among all tested patterns. The study also evaluated mass efficiency through strength-to-mass ratio calculations, with the concentric pattern achieving the highest value of 29.7 MPa/g, demonstrating superior weight-normalised mechanical performance alongside its absolute strength advantages. The study provides essential data on the performance-mechanical relationship of infill patterns that allow improvements to additive manufacturing processes to enhance structural integrity. These important results provide guidance for designers working on products that need particular mechanical characteristics.
- 8 June 2025
- Published by Riga Technical University in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
- Vol. 4, 375-382
Open AccessEFFECT OF INFILL PATTERN DESIGN ON TENSILE STRENGTH OF FUSED DEPOSITION MODELLED SPECIMENS
Deep knowledge of the connections between additive manufacturing design elements and the mechanical qualities of additive manufactured products becomes essential as the adoption of technology expands. Research analyses how the arrangement of material inside the printed object affects the tensile strength in specimens made through fused deposition modelling. The evaluation of 18 different infill patterns occurred through standardised tests, while technicians maintained identical processing parameters that included print temperature and both layer height and print speed. The test specimens underwent tensile testing for mechanical analysis. The test results indicate that the concentric pattern delivers maximum elastic modulus values at 1078 MPa, as well as a maximum tensile strength of 26.4 MPa which exceeds other patterns by 12-62% for modulus and 24-98% for strength. The elongation-at-break measurement of 10.5% is the best result for this pattern because it offers 10-338% more flexibility than competing structures. The elastic modulus (665 MPa) and the tensile strength (13.3 MPa) of the lightning pattern are the minimum among all tested patterns. The study also evaluated mass efficiency through strength-to-mass ratio calculations, with the concentric pattern achieving the highest value of 29.7 MPa/g, demonstrating superior weight-normalised mechanical performance alongside its absolute strength advantages. The study provides essential data on the performance-mechanical relationship of infill patterns that allow improvements to additive manufacturing processes to enhance structural integrity. These important results provide guidance for designers working on products that need particular mechanical characteristics.
- Open Access
Assessment of Physical and Mechanical Parameters of Spun-Bond Nonwoven Fabric
The selection of an appropriate fabric for technical applications, such as protective masks, hinges on a thorough understanding of the fabric’s physical and mechanical properties. This study addresses the challenge of selecting the optimal material structure for the upper layer of a protective mask, aiming to ensure adequate breathability while providing effective filtration against airborne particles and contaminants. We assessed and compared the physical–mechanical properties of five polymer spun-bond nonwoven fabrics from different suppliers. Our comprehensive evaluation included, as follows: a visual inspection; light permeability analysis; mass and thickness measurements; elongation and tensile strength tests; breathing resistance assessments; and filter penetration tests with paraffin oil. The results revealed significant variations in performance among the samples, with one fabric consistently outperforming the others across multiple parameters. Notably, this top-performing fabric met or exceeded the EN 149:2001+A1:2009 standard for breathing resistance and filtration efficiency and, in combination with additional filter layers, met the requirements or exceeded class FFP2 (filtering face piece). This study underscores the importance of meticulous material selection and quality control in optimizing PPE (personal protective equipment) performance and user safety, providing valuable insights for mask manufacturers and healthcare professionals.
Open AccessAssessment of Physical and Mechanical Parameters of Spun-Bond Nonwoven Fabric
The selection of an appropriate fabric for technical applications, such as protective masks, hinges on a thorough understanding of the fabric’s physical and mechanical properties. This study addresses the challenge of selecting the optimal material structure for the upper layer of a protective mask, aiming to ensure adequate breathability while providing effective filtration against airborne particles and contaminants. We assessed and compared the physical–mechanical properties of five polymer spun-bond nonwoven fabrics from different suppliers. Our comprehensive evaluation included, as follows: a visual inspection; light permeability analysis; mass and thickness measurements; elongation and tensile strength tests; breathing resistance assessments; and filter penetration tests with paraffin oil. The results revealed significant variations in performance among the samples, with one fabric consistently outperforming the others across multiple parameters. Notably, this top-performing fabric met or exceeded the EN 149:2001+A1:2009 standard for breathing resistance and filtration efficiency and, in combination with additional filter layers, met the requirements or exceeded class FFP2 (filtering face piece). This study underscores the importance of meticulous material selection and quality control in optimizing PPE (personal protective equipment) performance and user safety, providing valuable insights for mask manufacturers and healthcare professionals.
- Open Access
A Novel Method to Enhance the Mechanical Properties of Polyacrylonitrile Nanofiber Mats: An Experimental and Numerical Investigation
This study addresses the challenge of enhancing the transverse mechanical properties of oriented polyacrylonitrile (PAN) nanofibers, which are known for their excellent longitudinal tensile strength, without significantly compromising their inherent porosity, which is essential for effective filtration. This study explores the effects of doping PAN nanofiber composites with varying concentrations of polyvinyl alcohol (PVA) (0.5%, 1%, and 2%), introduced into the PAN matrix via a dip-coating method. This approach ensured a random distribution of PVA within the nanofiber mat, aiming to leverage the synergistic interactions between PAN fibers and PVA to improve the composite’s overall performance. This synergy is primarily manifested in the structural and functional augmentation of the PAN nanofiber mats through localized PVA agglomerations, thin films between fibers, and coatings on the fibers themselves. Comprehensive evaluation techniques were employed, including scanning electron microscopy (SEM) for morphological insights; transverse and longitudinal mechanical testing; a thermogravimetric analysis (TGA) for thermal stability; and differential scanning calorimetry (DSC) for thermal behavior analyses. Additionally, a finite element method (FEM) analysis was conducted on a numerical simulation of the composite. Using our novel method, the results demonstrated that a minimal concentration of the PVA solution effectively preserved the porosity of the PAN matrix while significantly enhancing its mechanical strength. Moreover, the numerical simulations showed strong agreement with the experimental results, validating the effectiveness of PVA doping in enhancing the mechanical properties of PAN nanofiber mats without sacrificing their functional porosity.
Open AccessA Novel Method to Enhance the Mechanical Properties of Polyacrylonitrile Nanofiber Mats: An Experimental and Numerical Investigation
This study addresses the challenge of enhancing the transverse mechanical properties of oriented polyacrylonitrile (PAN) nanofibers, which are known for their excellent longitudinal tensile strength, without significantly compromising their inherent porosity, which is essential for effective filtration. This study explores the effects of doping PAN nanofiber composites with varying concentrations of polyvinyl alcohol (PVA) (0.5%, 1%, and 2%), introduced into the PAN matrix via a dip-coating method. This approach ensured a random distribution of PVA within the nanofiber mat, aiming to leverage the synergistic interactions between PAN fibers and PVA to improve the composite’s overall performance. This synergy is primarily manifested in the structural and functional augmentation of the PAN nanofiber mats through localized PVA agglomerations, thin films between fibers, and coatings on the fibers themselves. Comprehensive evaluation techniques were employed, including scanning electron microscopy (SEM) for morphological insights; transverse and longitudinal mechanical testing; a thermogravimetric analysis (TGA) for thermal stability; and differential scanning calorimetry (DSC) for thermal behavior analyses. Additionally, a finite element method (FEM) analysis was conducted on a numerical simulation of the composite. Using our novel method, the results demonstrated that a minimal concentration of the PVA solution effectively preserved the porosity of the PAN matrix while significantly enhancing its mechanical strength. Moreover, the numerical simulations showed strong agreement with the experimental results, validating the effectiveness of PVA doping in enhancing the mechanical properties of PAN nanofiber mats without sacrificing their functional porosity.
- Open Access
A Finite Element Method for Determining the Mechanical Properties of Electrospun Nanofibrous Mats
This study focuses on the mechanical properties of electrospun nanofibrous mats, highlighting the importance of the characteristics of single nanofibers in determining the overall mechanical behavior of the mats. Recognizing the significant impacts of the diameter and structural properties of the nanofibers, this research introduces a novel methodology for deriving the effects of the mechanical properties of single nanofibers on the aggregate mechanical performance of electrospun oriented nanofiber mats. For this purpose, a finite element method (FEM) model is developed to simulate the elastoplastic response of the mats, incorporating the influence of structural parameters on mechanical properties. The validation of the FEM model against experimental data from electrospun polyacrylonitrile (PAN) nanofibers with different orientations demonstrates its effectiveness in capturing the elastic–plastic tensile behaviors of the material and confirms its accuracy in terms of reflecting the complex mechanical interactions within the nanofibrous mats. Through a detailed analysis of how nanofiber diameter, orientation of fibers, length-to-width ratio, and porosity affect the mechanical properties of the mats, this research provides valuable insights for the engineering of nanofibrous materials to meet specific mechanical requirements. These findings improve our understanding of nanofibrous mat structures, allowing for better performance in diverse applications as well as highlighting the critical importance of identifying the properties of single nanofibers and their associated impacts on material design.
Open AccessA Finite Element Method for Determining the Mechanical Properties of Electrospun Nanofibrous Mats
This study focuses on the mechanical properties of electrospun nanofibrous mats, highlighting the importance of the characteristics of single nanofibers in determining the overall mechanical behavior of the mats. Recognizing the significant impacts of the diameter and structural properties of the nanofibers, this research introduces a novel methodology for deriving the effects of the mechanical properties of single nanofibers on the aggregate mechanical performance of electrospun oriented nanofiber mats. For this purpose, a finite element method (FEM) model is developed to simulate the elastoplastic response of the mats, incorporating the influence of structural parameters on mechanical properties. The validation of the FEM model against experimental data from electrospun polyacrylonitrile (PAN) nanofibers with different orientations demonstrates its effectiveness in capturing the elastic–plastic tensile behaviors of the material and confirms its accuracy in terms of reflecting the complex mechanical interactions within the nanofibrous mats. Through a detailed analysis of how nanofiber diameter, orientation of fibers, length-to-width ratio, and porosity affect the mechanical properties of the mats, this research provides valuable insights for the engineering of nanofibrous materials to meet specific mechanical requirements. These findings improve our understanding of nanofibrous mat structures, allowing for better performance in diverse applications as well as highlighting the critical importance of identifying the properties of single nanofibers and their associated impacts on material design.