Himabindu Bantikatla
Himabindu Bantikatla has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Bhogoju Rajini Kanth
LSMS, Department of Physical Sciences, T.K.R. College of Engineering and Technology, Hyderabad, India
2 shared publicationsA. Hymavathi
1 shared publicationAtmakur Hymavathi
1 shared publicationB. Rajini Kanth
LSMS, Department of Physical Sciences, TKR College of Engineering and Technology, Hyderabad-500097, Telangana, India
1 shared publicationChandra Shekar Gantepogu
1 shared publicationKranthi Kiran Royal
1 shared publication
Latest Publications
- Open Access
- 10 June 2025
- Published by Elsevier in Next Materials
- Vol. 8
Enhancing the magnetic properties of CoFe2O4 ceramics through neodymium doping
- 10 June 2025
- Published by Elsevier in Next Materials
- Vol. 8
Open AccessEnhancing the magnetic properties of CoFe2O4 ceramics through neodymium doping
- 1 February 2024
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 13 (2) , 027006
Synthesis and Characterization of Flower-Like Cobalt-Doped ZnO Nanostructures for Ammonia Sensing Applications
The future trajectory of gas sensor development focuses mainly on two key aspects: minimizing power consumption and enhancing the capability to detect hazardous gases at lower concentrations under ambient conditions. The present study used the co-precipitation method to explore the synthesis of zinc oxide and cobalt-doped ZnO sensors, encompassing a range of cobalt concentrations from 1 wt% to 4 wt%. The synthesized samples undergo comprehensive analysis to evaluate their structural, morphological, optical, and gas-sensing properties. X-ray Diffraction (XRD) revealed a hexagonal Wurtzite structure, and the crystallite size decreased from 16.92 to 15.39 nm. Energy-Dispersive X-ray spectroscopy (EDX) and Fourier-Transform Infrared (FTIR) Spectroscopy collectively affirmed the presence of cobalt. Scanning Electron Microscopy (SEM) was used to analyze the morphological characteristics. The Tauc-plot was used to determine the optical bandgap via diffuse reflectance spectroscopy. As cobalt doping increased, the band gap increased from 3.18 to 3.23 eV. Further, Atomic Force Microscopy (AFM) and Brunauer–Emmett–Teller (BET) analysis were used to assess the surface topography and pore size distribution. The AFM measurements indicated roughness increased from 435 to 700 nm. The BET analysis revealed mesoporous properties, with surface area increased from 18.657 to 21.962 m2/g and pore sizes varying from 3.67 to 3.72 nm. Subsequently, the gas-sensing capabilities of the Co-doped ZnO sensors were examined for various volatile organic compounds (VOCs) at room temperature. The experimental results demonstrated excellent performance in detecting NH3 gas precisely. The sensor with 4% cobalt doping exhibited a fast response and recovery time of 21 and 20 s towards 2 ppm of NH3.
- 1 February 2024
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 13 (2) , 027006
Synthesis and Characterization of Flower-Like Cobalt-Doped ZnO Nanostructures for Ammonia Sensing Applications
The future trajectory of gas sensor development focuses mainly on two key aspects: minimizing power consumption and enhancing the capability to detect hazardous gases at lower concentrations under ambient conditions. The present study used the co-precipitation method to explore the synthesis of zinc oxide and cobalt-doped ZnO sensors, encompassing a range of cobalt concentrations from 1 wt% to 4 wt%. The synthesized samples undergo comprehensive analysis to evaluate their structural, morphological, optical, and gas-sensing properties. X-ray Diffraction (XRD) revealed a hexagonal Wurtzite structure, and the crystallite size decreased from 16.92 to 15.39 nm. Energy-Dispersive X-ray spectroscopy (EDX) and Fourier-Transform Infrared (FTIR) Spectroscopy collectively affirmed the presence of cobalt. Scanning Electron Microscopy (SEM) was used to analyze the morphological characteristics. The Tauc-plot was used to determine the optical bandgap via diffuse reflectance spectroscopy. As cobalt doping increased, the band gap increased from 3.18 to 3.23 eV. Further, Atomic Force Microscopy (AFM) and Brunauer–Emmett–Teller (BET) analysis were used to assess the surface topography and pore size distribution. The AFM measurements indicated roughness increased from 435 to 700 nm. The BET analysis revealed mesoporous properties, with surface area increased from 18.657 to 21.962 m2/g and pore sizes varying from 3.67 to 3.72 nm. Subsequently, the gas-sensing capabilities of the Co-doped ZnO sensors were examined for various volatile organic compounds (VOCs) at room temperature. The experimental results demonstrated excellent performance in detecting NH3 gas precisely. The sensor with 4% cobalt doping exhibited a fast response and recovery time of 21 and 20 s towards 2 ppm of NH3.
- 22 April 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (12) , 1-18
A nanostructured Al-doped ZnO as an ultra-sensitive room-temperature ammonia gas sensor
Novel chemi-resistive gas sensors with strong detection capabilities operating at room temperature are desirable owing to their extended cycle life, high stability, and low power consumption. The current study focuses on detecting NH3 at room temperature using lower gas concentrations. The co-precipitation technique was employed to produce pure and Al-doped ZnO nanoparticles, which were calcined at 300 °C for three hours. The effect of aluminium (Al) doping on the structural, morphological, optical, and gas-sensing abilities was investigated and reported. The presence of aluminium was confirmed by XRD, EDX, and FTIR spectroscopy. Additionally, to assess the various characteristics of Al-doped ZnO nanoparticles, scanning electron microscopy (SEM), ultraviolet–visible diffuse reflectance spectroscopy (UV-DRS), atomic force microscopy (AFM), and Brunauer–Emmett–Teller (BET) techniques were used. The crystallite size increased from 14.82 to 17.49 nm in the XRD analysis; the SEM pictures showed a flower-like morphology; and the energy gap decreased from 3.240 to 3.210 eV when Al doping was raised from 1 wt% to 4 wt%. AFM studies revealed topographical information with significant roughness in the range of 230–43 nm. BET analysis showed a mesoporous nature with surface areas varying from 25.274 to 14.755 m2/g and pore diameters ranging from 8.34 to 7.00 nm. The sensing capacities of pure and Al-doped ZnO nanoparticles towards methanol (CH3OH), toluene (C7H8), ethanol (C2H5OH), and ammonia (NH3) were investigated at room temperature. The one-wt% Al-doped ZnO sensor demonstrated an ultrafast response and recovery times at one ppm compared to other AZO-based sensors towards NH3.
- 22 April 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (12) , 1-18
A nanostructured Al-doped ZnO as an ultra-sensitive room-temperature ammonia gas sensor
Novel chemi-resistive gas sensors with strong detection capabilities operating at room temperature are desirable owing to their extended cycle life, high stability, and low power consumption. The current study focuses on detecting NH3 at room temperature using lower gas concentrations. The co-precipitation technique was employed to produce pure and Al-doped ZnO nanoparticles, which were calcined at 300 °C for three hours. The effect of aluminium (Al) doping on the structural, morphological, optical, and gas-sensing abilities was investigated and reported. The presence of aluminium was confirmed by XRD, EDX, and FTIR spectroscopy. Additionally, to assess the various characteristics of Al-doped ZnO nanoparticles, scanning electron microscopy (SEM), ultraviolet–visible diffuse reflectance spectroscopy (UV-DRS), atomic force microscopy (AFM), and Brunauer–Emmett–Teller (BET) techniques were used. The crystallite size increased from 14.82 to 17.49 nm in the XRD analysis; the SEM pictures showed a flower-like morphology; and the energy gap decreased from 3.240 to 3.210 eV when Al doping was raised from 1 wt% to 4 wt%. AFM studies revealed topographical information with significant roughness in the range of 230–43 nm. BET analysis showed a mesoporous nature with surface areas varying from 25.274 to 14.755 m2/g and pore diameters ranging from 8.34 to 7.00 nm. The sensing capacities of pure and Al-doped ZnO nanoparticles towards methanol (CH3OH), toluene (C7H8), ethanol (C2H5OH), and ammonia (NH3) were investigated at room temperature. The one-wt% Al-doped ZnO sensor demonstrated an ultrafast response and recovery times at one ppm compared to other AZO-based sensors towards NH3.
- 1 January 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 54, 557-559
Design, green synthesis and characterization of zinc oxide nanoparticles from Ocimum tenuiflorum Var. Ram tulsi
- 1 January 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 54, 557-559
Design, green synthesis and characterization of zinc oxide nanoparticles from Ocimum tenuiflorum Var. Ram tulsi
- Top Cited Papers
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 4891-4896
Microstructural parameters from X-ray peak profile analysis by Williamson-Hall models; A review
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 4891-4896
Top Cited PapersMicrostructural parameters from X-ray peak profile analysis by Williamson-Hall models; A review
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 19, 761-766
Design and fabrication of hybrid solar silicon PV system
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 19, 761-766
Design and fabrication of hybrid solar silicon PV system