ISIndra Surjati

Indra Surjati

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Indra Surjati has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Retrieving Delta Permittivity Using Highly Independent Dual-Band Microwave Sensor With Alternately Reference Capabilities

    by Syah Alam, Indra Surjati, Lydia Sari, Raden Deiny Mardian, Fitri Kurnia Sari, Teguh Firmansyah, Muhammad Iqbal, Nugraha, Dian Widi Astuti, Mudrik Alaydrus, et al.

    This paper proposes a delta permittivity detection using a microwave sensor based on dual-opposite interdigitated split ring resonator with alternately reference capabilities. The proposed sensor has two different sensing areas and has high independent characteristics operating at dual-band resonance frequencies at fr1 = 0.94 GHz and fr2 = 1.59 GHz. The delta permittivity is detected by placing the reference sample and the measured sample in each sensing area alternately and simultaneously in direct contact. The permittivity of the reference material has a fixed value using vacuum (εr = 1) and RO5880 (εr = 2.2), while the permittivity of the measured sample varies in the range 1 - 9.2. From the measurement results, the sensor has a high performance with a maximum ΔF of 0.81 GHz and 0.84 GHz, Frequency Detection Resolution (FDR) of 0.45 GHz and 0.48 GHz and Normalized Sensitivity (NS) of 6.00% and 6.03% for vacuum and RO5880 as reference, respectively. In addition, the average accuracy of the sensor is in the range of 91.46% - 97.40% for the detection of delta permittivity of the sample. Both sensing areas can be used as references interchangeably and have high performance, respectively. Therefore, the proposed sensor can be recommended for several applications such as material quality control, pharmaceutical industry and food quality control.


  • Open Access

    High Stability Single-Port Dual Band Microwave Sensor Based on Interdigital Capacitor Structure With Asymmetry Branch Feedline

    by Syah Alam, Indra Surjati, Lydia Sari, Raden Deiny Mardian, Teguh Firmansyah, Muhammad Iqbal, Slamet Widodo, Mudrik Alaydrus, Zahriladha Zakaria

    This paper proposes a single-port interdigital capacitor (IDC) resonator based on asymmetric branch feed line with high stability performance for permittivity detection of solid materials with a permittivity range of 1 - 6.15. The microwave sensor is designed using a single-port resonator operating at two different resonant frequencies fr1 = 1.61 GHz and fr2 = 2.52 GHz. Dual band frequency was proposed using asymmetric branch feed line. In addition, to confine the electric field concentration of the resonator, an interdigital capacitor (IDC) structure is proposed as a solution. Furthermore, a copper shield was proposed as conducting material to evaluate performance stability of the sensor from disturbance effect with range of d = 1 cm – 2.5 cm. Based on the measurement results, the sensor has high stability both without and with disturbance with an a Frequency Detection Resolution (FDR) of 0.009 - 0.4 GHz/Δεr, a Normalized Sensitivity (NS) of 0.4% - 4.4%, and an average accuracy of 90% - 95% for both resonance frequencies, respectively. Therefore, this sensor can be recommended for several applications such as biomedical industry, pharmaceuticals and material quality control especially for outdoor measurements that are potentially affected by electromagnetic interference and disturbance.


  • Open Access

    Development model of a high-performance multiple input multiple output microstrip antenna based on a planar series array with 8×2 elements for 5G communication systems

    by Syah Alam, Indra Surjati, Lydia Sari, Yuli Kurnia Ningsih, Suryadi Suryadi, Teguh Firmansyah, Zahriladha Zakaria

    MIMO (Multiple Input Multiple Output) makes a major contribution to 5G communication systems by increasing network capacity and spectrum efficiency. In 5G, MIMO enables the use of multiple antennas at base stations and user devices, allowing simultaneous sending and receiving of data over multiple paths. This significantly increases data throughput and connection reliability, especially in environments with high user density. In addition, MIMO technology supports the implementation of beamforming, which focuses signals on a specific direction, reduces interference, and improves signal coverage and quality, making it one of the keys to achieving faster and more responsive 5G performance. Therefore, antennas with wide bandwidth, high gain and MIMO performance are crucial for supporting 5G communication systems. This paper proposes a high-performance MIMO microstrip antenna based on a series planar array with 8×2 elements operating at a resonant frequency of 3.5 GHz for 5G communication systems. A spiral stub and a feed inset are proposed to control the reflection coefficient and bandwidth of the antenna while the series planar array is proposed to increase the gain. To support the MIMO communication system, the proposed antenna is separated into two different ports with a certain distance. From the measurement results, the proposed antenna has high performance indicated by a wide bandwidth of 680 MHz (3–3.68 GHz) and a high gain of 17.8 dB at a resonant frequency of 3.5 GHz. In addition, the proposed antenna has high mutual coupling and diversity indicated by ECC and DG of 0.001 and 9.99 dB, respectively. This work provides a solution to design a high-performance microstrip antenna and can be implemented as a receiving antenna for 5G communication systems

  • Open Access

    Dual Functional Liquid Displacement and Angular Detection Based on Band Stop Response Microwave Sensor

    by Syah Alam, Indra Surjati, Lydia Sari, R. Deiny Mardian, Marouane Abicha, Zahriladha Zakaria, Teguh Firmansyah, Mudrik Alaydrus, Yusnita Rahayu

    This paper proposes dual functional microwave sensor for displacement and angular detection of liquid material based on electric coupled (ELC) resonator. The liquid was placed in polystyrene-mm pipe channel filled with water content. The proposed resonator uses a two-port band stop filter operating at a resonant frequency of 2.72 GHz. Polystyrene-mm pipe channels are used to accommodate water samples placed in the sensing area of the sensor in the center of the ELC resonator. Displacement and angular detection were observed based on the shift in the resonant frequency of the resonator. Based on the measurement results, the proposed sensor has a sensitivity for displacement detection of 31.5 MHz/cm with a distance range of d = 1 – 4 cm while for angular detection it is 0.33 MHz/° with a rotation angle of 0 – 9° for polystyrene-mm pipe channel filled with water content. This paper makes a significant contribution by proposed a dual functional microwave sensor for displacement and angular detection that can be recommended for the automotive, robotics and aerospace industries.


  • Collaboratively Far-Field and Near-Field Regions for Dual-Modalities Microwave Permittivity Sensor Using T-Shaped Resonator Embedded With IDC

    by Syah Alam, Zahriladha Zakaria, Indra Surjati, Noor Azwan Shairi, Mudrik Alaydrus, Teguh Firmansyah, Yuli Kurnia Ningsih, Lydia Sari

    This letter introduces collaboratively far-field and near-field regions for dual modalities permittivity sensor to characterized solid materials. The proposed sensor comprises a T-shaped resonator featuring a single port embedded with Interdigital capacitor (IDC). The 1 st resonator, operating at fr1 = 2.43 GHz as the long-distance detection utilizes the far field region, while the 2 nd resonator, working at fr2 = 1.64 GHz, functions as the contact detection utilizes the near field region. These resonators possess distinct sensing hotspots, enabling independent utilization. Contact detection is achieved by utilized the near-field region by placing the material under test (MUT) directly above the surface of the 2 nd resonator, while the 1 st resonator for long-distance detection utilized the far-field region by using the interrogator antenna at a distance of d = 10 cm. The experimental results demonstrate that the proposed sensors exhibit a maximum sensitivity of 5.13% and 3.40% for near field and far field detection, respectively. Moreover, the average accuracy for both contact and long-distance detection is 95.99% and 95.16%, respectively, when compared to the permittivity values obtained from the datasheet within the range of 1 - 6.15. This research holds significant practical value for the contact and long-distance characterization of solid materials, particularly in applications such as biomedical, quality control, and pharmaceutical industries.


  • Open Access

    Wide band and high gain microstrip antenna using planar series array 4×2 element for 5G communication system

    by Syah Alam, Indra Surjati, Lydia Sari, Yuli Kurnia Ningsih, Suryadi Suryadi, Galang Trihantoro, Teguh Firmansyah, Zahriladha Zakaria

    The 5G communication system requires an antenna as a receiving device that has high performance including wide bandwidth and high gain. Microstrip antennas have advantages such as low cost, suitable for high frequencies and easy to integrate with other devices. One of the disadvantages of microstrip antennas is their narrow bandwidth and low gain. Therefore, microstrip antennas with wide bandwidth and high gain are especially needed to support 5G communication systems. This paper provides a solution by proposed a wide bandwidth and high gain microstrip antenna operating at a resonant frequency of 3.5 GHz for a 5G communication system. The proposed antenna was developed in four stages starting from a single element, a two-element series array, a 4-element series array and a 4×2-element planar series array. A series planar array technique is proposed to increase the gain and bandwidth of the microstrip antenna simultaneously. In this paper, simulations and measurements from the proposed antenna are displayed and compared comprehensively to show the performance improvement from each stage of the development of the proposed model. Based on the measurement results, the designed antenna has an impedance bandwidth (IBW) of 0.6 GHz and fractional bandwidth (FBW) of 17.14 % with a frequency range of 3.11–3.71 GHz and maximum gain of 12.2 dB at a resonant frequency of 3.5 GHz. The bandwidth and gain of the antennas increased by 205 % and 99.03 % compared to single element antennas, respectively. Therefore, the proposed antenna can be recommended to be used as a receiving antenna for 5G communication systems


  • Integrated Microwave Sensor and Antenna Sensor Based on Dual T-Shaped Resonator Structures for Contact and Noncontact Characterization of Solid Material

    by Syah Alam, Zahriladha Zakaria, Indra Surjati, Noor Azwan Shairi, Mudrik Alaydrus, Teguh Firmansyah

    This paper proposes the integration of microwave sensors (MS) and antenna sensors (AS) for contact and non-contact characterization of solid materials. Integration between MS and AS were determined based on the reflection coefficient (S11) where S11 of ≥ -10 dB was proposed as MS and S 11 of ≤ -10 dB was proposed as AS. The proposed sensor consists of a dual T-Shaped resonator with single port operating at a resonant frequency of f r1 = 1.81 GHz for MS and f r2 = 2.34 GHz for AS using FR-4 substrate with ε r of 4.3, tan δ of 0.0265 and thickness of 1.6 mm. Furthermore, the two resonant frequencies had independent characteristics with different sensing hotspots. MS are proposed for permittivity detection of the Material Under Test (MUT) for contact detection while non-contact detection is proposed by utilizing AS. The procedure for contact detection was carried out by placing the material under test on the surface of the sensor while non-contact detection was carried out by placing the MUT with an air gap between the MUT (d) and the AS was 0.5 - 1.5 mm. The measurement results showed that the average accuracy was 99.30% and 99.31% for the MS and AS for the permittivity range of 1 - 6.15 while the normalized sensitivities of the proposed sensors were 1.15 % and 0.16%, respectively. The results of this research are novel and can be recommended for several purposes related to biomedical and pharmaceutical industries requiring contact and non-contact detection of material characterization.


  • Dual-Band Independent Permittivity Sensor Using Single-Port With a Pair of U-Shaped Structures for Solid Material Detection

    by Syah Alam, Zahriladha Zakaria, Indra Surjati, Noor Azwan Shairi, Mudrik Alaydrus, Teguh Firmansyah

    This study proposes a single-port dual-band independent microwave sensor for detecting solid materials. The sensor structure consists of a pair U-shaped resonators connected by a power divider and a microstrip feed line with an impedance of 50 Ohms with two different sensing hotspots. The $1^{\text {st}}$ and $2^{\text {nd}}$ resonators operate at a frequency of 1.200 GHz and 2.100 GHz, respectively. The type of material under test (MUT) is a standard material with a size of 10 mm $\times10$ mm (RO5880, RO4003C, and FR4). The proposed sensor had a very high accuracy compared with both of using permitivitty from datasheet and calibrated frequency from simulation for the $1^{\text {st}}$ and $2^{\text {nd}}$ resonator, respectively. Moreover, the pair of the U-shaped resonators had independent performances and they did not affect each other when the MUT was loaded. Furthermore, it can also operate with single-port measurement, which is a more efficient resource. Finally, the proposed microwave sensor can be a promising solution for detecting different permittivity of solid materials independently with high accuracy for applications such as the food industry, material quality control, and biomedical.


  • Open Access

    Miniaturization of Microstrip Antenna Using Spiral labyrinth Method at Frequency of Work 3.5 GHz

    by Diah Setiyowati, Syah Alam, Indra Surjati

    Along with the times, communication technology has developed so that it is currently included in the Fifth Generation (5G) Communication System. The 5G communication system is divided into three frequency categories, namely low band, middle band and high band. One of the important devices in the telecommunications sector is the antenna. Antenna serves to send and receive electromagnetic signals at a certain working frequency. Currently, antennas have been completely integrated into the needs of modern society. One type of antenna that can support the needs of today's technology is a microstrip antenna. This antenna has several advantages, especially in its antenna compact design, low profile configuration and affordable manufacturing costs. In this article, a microstrip antenna is designed with the spiral labyrinth method that works at a frequency of 3.5 GHz for 5G communication system. Propsosed antena designed using RT Duroid R5880 with dielectric constant ( ) 2.2, dielectric loss (loss tan) 0.0009 and thickness (h) 1.57 mm. The simulation results show the reflection coefficient -29.58 dB, VSWR 1.069, gain 6.432 dB at frequency of 3.5 GHz . Spiral labyrinth has been succesfully reduced patch antenna and enclosure until 22.5% and 24.8%, respectively.


  • Open Access

    Microstip Antenna Reflection Coefficient with X Slot Addition Method for 5G Connection

    by Yessi Kartini Gultom, Syah Alam, Indra Surjati

    The development of cellular technology has now entered the 5th generation (5G), this 5th generation provides 3 types of services, eMBB (enhanced Mobile BroadBand), URLLC (Ultra-Reliable and Low-Latency Communications) and mMTC (massive Machine Type of Communications). One of the important devices in 5G technology is an antenna device which is able to support these 3 services. 5G technology requires an antenna that has high performance. There are various types of antennas, one of which is a microstrip antenna. Microstrip antenna is one of the most widely used antennas in telecommunications because of its light mass, small dimensions and easy fabrication. There are various ways or methods that can be done to overcome the narrow bandwidth of microstrip antennas, by increasing the thickness of the substrate, using parasitic elements, reducing the value of the dielectric constant, adding inserts to the feeder, or by modifying the patch by adding slots on the patch antenna. In this study to improve the performance value of the microstrip antenna, the researchers discussed increasing the reflection coefficient by adding X Slots to a microstrip antenna with a working frequency of 3.5 GHz for 5G communication. The results of this study showed an increase in the reflection coefficient of 67%, and an increase in bandwidth of 5%.