Zaure Absat
Zaure Absat has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
A.M. Gyulmaliev
1 shared publication- Aigul Muratbekova
Academician E.A. Buketov Karaganda University, Karaganda, Kazakstan
1 shared publication - Alexandr Pudov
Academician E.A. Buketov Karaganda University, Karaganda, Kazakstan
1 shared publication - Almas Tusipkhan
Karaganda Buketov University, Karaganda, Kazakhstan
1 shared publication - Anton Stanislavovich Mostovoy
Laboratory of Modern Methods of Research of Functional Materials and Systems, Yuri Gagarin State Technical University of Saratov, Polytechnichskaya St., 77, 410054 Saratov, Russia
1 shared publication - Arai K. Zhumabekova
Department of Chemistry, Chemical Technology and Ecology, Kazakh University of Technology and Business, Kayym Mukhamedkhanov Str., Building 37 A, 010000 Astana, Kazakhstan
1 shared publication
Latest Publications
- Open Access
- 31 March 2025
- Published by Kazakh University of Technology and Business in Вестник КазУТБ
- Vol. 1 (26)
TESTING A NEW TECHNOLOGY OF PROCESSING COPPER ELECTROLYTE TO OBTAIN NICKEL SULFATE
Integrated processing of the electrolyte is one of the priority tasks for copper producers. In this work, in order to obtain high-quality copper and nickel sulfate, the method of neutralization, dehydrogenation, extraction of impurities (As, Sb, Bi) with pseudobrookite, additional oxidation of iron to trivalent, neutralization of the solution with nickel carbonate with the release of insoluble compounds of copper, iron and zinc, and crystallization of sulfate nickel.
- 31 March 2025
- Published by Kazakh University of Technology and Business in Вестник КазУТБ
- Vol. 1 (26)
Open AccessTESTING A NEW TECHNOLOGY OF PROCESSING COPPER ELECTROLYTE TO OBTAIN NICKEL SULFATE
Integrated processing of the electrolyte is one of the priority tasks for copper producers. In this work, in order to obtain high-quality copper and nickel sulfate, the method of neutralization, dehydrogenation, extraction of impurities (As, Sb, Bi) with pseudobrookite, additional oxidation of iron to trivalent, neutralization of the solution with nickel carbonate with the release of insoluble compounds of copper, iron and zinc, and crystallization of sulfate nickel.
- Open Access
- 1 January 2022
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 87 (7-8) , 925-937
A study of copper leaching from the tailings of the Karagaily (Republic of Kazakhstan) concentrating factory using an electric hydropulse discharge
The method of using of concentration plants tailings is proposed for the first time in this study. These tailings contain a number of valuable metals, such as Cu, Fe, Zn, etc. and are a potential raw material for obtaining concentrates of some elements. An electrohydropulse discharge is used to intensify the process of leaching of copper and other metals. Ammonium bifluoride, the most effective of the ammonium salts used in the copper leaching by the ammonization method, was chosen as a reagent. The influence of significant leaching parameters is studied and optimized using probabilistic deterministic planning of experiment. Based on the study findings, the following process conditions were found to be optimal: the mass ratio of S : L (solid : liquid) = 1 : 1; Cu : F = 1 : 6; sulfuric acid concentration - 40 g/l; the experiment duration - 30 min; discharge voltage - 10 kV and the leaching efficiency can be achieved 80-85 %. Comparative features of tailings samples from the Karagaily concentration plant (Republic of Kazakhstan) were studied using X-ray diffraction (XRD), scanning electron microscope (SEM), atomic emission spectral analysis. It was found that the copper minerals contained in the tailings are completely shattered and the copper is maximally transferred to the aqueous phase.
- 1 January 2022
- Published by National Library of Serbia in Journal of the Serbian Chemical Society
- Vol. 87 (7-8) , 925-937
Open AccessA study of copper leaching from the tailings of the Karagaily (Republic of Kazakhstan) concentrating factory using an electric hydropulse discharge
The method of using of concentration plants tailings is proposed for the first time in this study. These tailings contain a number of valuable metals, such as Cu, Fe, Zn, etc. and are a potential raw material for obtaining concentrates of some elements. An electrohydropulse discharge is used to intensify the process of leaching of copper and other metals. Ammonium bifluoride, the most effective of the ammonium salts used in the copper leaching by the ammonization method, was chosen as a reagent. The influence of significant leaching parameters is studied and optimized using probabilistic deterministic planning of experiment. Based on the study findings, the following process conditions were found to be optimal: the mass ratio of S : L (solid : liquid) = 1 : 1; Cu : F = 1 : 6; sulfuric acid concentration - 40 g/l; the experiment duration - 30 min; discharge voltage - 10 kV and the leaching efficiency can be achieved 80-85 %. Comparative features of tailings samples from the Karagaily concentration plant (Republic of Kazakhstan) were studied using X-ray diffraction (XRD), scanning electron microscope (SEM), atomic emission spectral analysis. It was found that the copper minerals contained in the tailings are completely shattered and the copper is maximally transferred to the aqueous phase.
- 30 June 2021
- Published by Karagandy University of the name of academician E.A. Buketov in Bulletin of the Karaganda University. "Chemistry" Series
- Vol. 102 (2) , 89-95
Thermokinetic parameters of the primary coal tars destruction in the presence of catalysts and polymeric materials
The hydrogen-donor abilities of polymers and the activity of catalysts in the process of thermal destruction of the organic mass of primary coal tar (PCT) are studied by non-isothermal kinetics methods. PCT,magnetic microspheres, nickel-deposited chrysotilechrysotile and Fe3O4nanocatalysts were used as initial raw materials. Рolymers such as polyethylene (PE), polystyrene(PS) and polyethylene glycol (PEG) were selected as a hy-drogen donor. The phases Mg3[OH]4{Si2O5} and NiO were determined by X-ray phase analysis (XRD) in the obtained catalyst (nickel-deposited chrysotile), and the presence of highly dispersed nickel oxide particles on the surface and inside the nanotubes was shown by the transmission electron microscope (TEM). Nickel oxide particles of 8–11 nmand 30–37 nmwere evenly distributed on the surface and inside the chrysotile nanotubes. The kinetic parameters of the thermal destruction of a mixture of PCT, catalyst and polymer material were determined on the basis of thermogravimetric analysis using the integral method and the method for determin-ing the thermokinetic parameters by the inflection point on the thermogravimetric curve(TG). The change in the activation energy, rate constant and pre-exponential factor with an increase in the degree of destruction of the organic mass of the PCT is established. It was shown that the nature of polymers and catalysts significantly affects the value of the rate constant and the activation energy. The calculated activation energies of the thermal destruction of a mixture of coal tar with PS and PE in the presence of a catalyst (nickel-deposited chrysotile) by the first method are 47.6 kJ/mol and 40.4 kJ/mol, and by the second method are 47.3 kJ/mol and 86.5kJ/mol respectively.
- 30 June 2021
- Published by Karagandy University of the name of academician E.A. Buketov in Bulletin of the Karaganda University. "Chemistry" Series
- Vol. 102 (2) , 89-95
Thermokinetic parameters of the primary coal tars destruction in the presence of catalysts and polymeric materials
The hydrogen-donor abilities of polymers and the activity of catalysts in the process of thermal destruction of the organic mass of primary coal tar (PCT) are studied by non-isothermal kinetics methods. PCT,magnetic microspheres, nickel-deposited chrysotilechrysotile and Fe3O4nanocatalysts were used as initial raw materials. Рolymers such as polyethylene (PE), polystyrene(PS) and polyethylene glycol (PEG) were selected as a hy-drogen donor. The phases Mg3[OH]4{Si2O5} and NiO were determined by X-ray phase analysis (XRD) in the obtained catalyst (nickel-deposited chrysotile), and the presence of highly dispersed nickel oxide particles on the surface and inside the nanotubes was shown by the transmission electron microscope (TEM). Nickel oxide particles of 8–11 nmand 30–37 nmwere evenly distributed on the surface and inside the chrysotile nanotubes. The kinetic parameters of the thermal destruction of a mixture of PCT, catalyst and polymer material were determined on the basis of thermogravimetric analysis using the integral method and the method for determin-ing the thermokinetic parameters by the inflection point on the thermogravimetric curve(TG). The change in the activation energy, rate constant and pre-exponential factor with an increase in the degree of destruction of the organic mass of the PCT is established. It was shown that the nature of polymers and catalysts significantly affects the value of the rate constant and the activation energy. The calculated activation energies of the thermal destruction of a mixture of coal tar with PS and PE in the presence of a catalyst (nickel-deposited chrysotile) by the first method are 47.6 kJ/mol and 40.4 kJ/mol, and by the second method are 47.3 kJ/mol and 86.5kJ/mol respectively.