Sheng Luo

Rockburst is a kind of dynamic rock failure process that is easily induced by the excavation of a high-stress rock mass. However, from an energy perspective, the existing indexes for rockburst tendency have a limitation in that they do not consider the energy release speed. In this study, energy release effectiveness was proposed based on the local energy release rate while considering the influence of the energy release speed. The index can evaluate the stability of surrounding rock during the excavation of high-stress rock. The index can be obtained by recording the strain energy density of every element in the model during excavation and identifying the maximum strain energy density (E_imax), the minimum strain energy density (E_imin), the maximum time (t_imax), and the minimum time (t_imin) to calculate energy release speed and energy release effectiveness. A case study of the excavation of an experimental tunnel, namely, the URL of AECL, was adopted to validate the index. The results indicated that the proposed index can clearly identify the location and strength of the impact tendency area, and it can be effectively applied to the stability analysis during the excavation of deep tunnels.

To recommend the excavation procedures and design parameters for underground powerhouses, excavation procedures of fifty-one underground powerhouses in China were summarized and analyzed based on in situ stress conditions. Firstly, the complex stress environment in China was introduced and fifty-one underground powerhouses with their engineering scale, size, lithology, rock classification and in situ stress level were listed in detail. Subsequently, to evaluate the influence of in situ stress levels on excavation procedure design, the correlation between excavation procedures and in situ stress level in three main excavation zones were analyzed accordingly. Moreover, to provide the excavation design recommendations, the strength–stress ratio (SSR) was promoted to analyze and recommend the design parameters, and the blasting excavation design based on the stress transient unloading control was also supplemented. The results show that excavation procedures have different priorities under different in situ stress levels, and the design parameters show an obvious relationship with in situ stress levels. Moreover, the excavation procedure parameters are suggested to adjust accordingly under different SSR. The discussion of influencing factors and specification ensures its rationality and accuracy. It is believed that the summary and recommendations can provide a good reference for excavation procedure optimization of underground powerhouse under high in situ stress.