Huiying Qi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Huiying Qi has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Tonghuan Zhang
8 shared publicationsDi Liu
7 shared publications- Baofeng Tu
Shandong University of Science and Technology, Qingdao 266590, China
6 shared publications Baofeng Tu
College of Chemical and Biological Engineering, Shandong University of Science and Technology, Qingdao 266590, China
5 shared publicationsMojie Cheng
5 shared publicationsPeng Qiu
4 shared publications
Latest Publications
- 6 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (41) , 55343-55352
Boost Electrocatalytic Activity of La0.6Sr0.4Co0.2Fe0.8O3−δ Air Electrode Prepared by High-Temperature Shock for Solid Oxide Electrochemical Cells
High-temperature shock (HTS) is an emerging material synthesis technology with advantages, such as rapid processing, low energy consumption, and high controllability. This technology can prepare ultrafine nanoparticles with uniform particle size distribution and introduce additional oxygen vacancies, offering significant potential for the preparation of key materials for solid oxide electrochemical cells (SOCs). In this study, the La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) air electrode was successfully prepared using HTS technology. Compared to the conventional muffle furnace calcination, the HTS-prepared LSCF exhibits a larger specific surface area and a higher oxygen vacancy concentration, and it demonstrates significant improvements in performance. The oxygen ion conducting SOC (O-SOC) with the HTS-LSCF air electrode achieved a peak power density (PPD) of 960 mW cm-2 and a current density of 0.38 A cm-2 (at 1.3 V) at 700 °C. Meanwhile, the proton conducting SOC (P-SOC) with HTS-LSCF air electrode reached a PPD value of 1.34 W cm-2 and a current density of 3.43 A cm-2 (at 1.3 V) at 700 °C. Additionally, the P-SOC with HTS-LSCF air electrode showed no significant degradation during over 200 h of long-term testing, reflecting the excellent stability of HTS-LSCF. This work provides a fast, efficient, and economical approach for synthesizing high-performance, high-stability SOC air electrode materials.
- 6 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (41) , 55343-55352
Boost Electrocatalytic Activity of La0.6Sr0.4Co0.2Fe0.8O3−δ Air Electrode Prepared by High-Temperature Shock for Solid Oxide Electrochemical Cells
High-temperature shock (HTS) is an emerging material synthesis technology with advantages, such as rapid processing, low energy consumption, and high controllability. This technology can prepare ultrafine nanoparticles with uniform particle size distribution and introduce additional oxygen vacancies, offering significant potential for the preparation of key materials for solid oxide electrochemical cells (SOCs). In this study, the La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) air electrode was successfully prepared using HTS technology. Compared to the conventional muffle furnace calcination, the HTS-prepared LSCF exhibits a larger specific surface area and a higher oxygen vacancy concentration, and it demonstrates significant improvements in performance. The oxygen ion conducting SOC (O-SOC) with the HTS-LSCF air electrode achieved a peak power density (PPD) of 960 mW cm-2 and a current density of 0.38 A cm-2 (at 1.3 V) at 700 °C. Meanwhile, the proton conducting SOC (P-SOC) with HTS-LSCF air electrode reached a PPD value of 1.34 W cm-2 and a current density of 3.43 A cm-2 (at 1.3 V) at 700 °C. Additionally, the P-SOC with HTS-LSCF air electrode showed no significant degradation during over 200 h of long-term testing, reflecting the excellent stability of HTS-LSCF. This work provides a fast, efficient, and economical approach for synthesizing high-performance, high-stability SOC air electrode materials.
- 25 September 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (23) , 49185-49193
The comparative effects of cobalt and/or iron ions as dopants into Ba(Zr, Y)O3-δ-based perovskite cathodes for intermediate-temperature SOFCs
- 25 September 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (23) , 49185-49193
The comparative effects of cobalt and/or iron ions as dopants into Ba(Zr, Y)O3-δ-based perovskite cathodes for intermediate-temperature SOFCs
- 4 June 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 72, 958-966
Investigation of microstructure evolution and redox behavior of Ni-GDC cermet by cyclic re-oxidation in CO2
- 4 June 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 72, 958-966
Investigation of microstructure evolution and redox behavior of Ni-GDC cermet by cyclic re-oxidation in CO2
- 7 November 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 51, 1136-1144
Investigation of the special surface state of BaCo0.4Fe0.4Zr0.1Y0.1O3-δ vs Ba0.5Sr0.5Co0.8Fe0.2O3-δ and La0.6Sr0.4Co0.2Fe0.8O3-δ for high oxygen catalysis activity on the intermediate-temperature solid oxide fuel cell
- 7 November 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 51, 1136-1144
Investigation of the special surface state of BaCo0.4Fe0.4Zr0.1Y0.1O3-δ vs Ba0.5Sr0.5Co0.8Fe0.2O3-δ and La0.6Sr0.4Co0.2Fe0.8O3-δ for high oxygen catalysis activity on the intermediate-temperature solid oxide fuel cell
- 31 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (45) , 52673-52685
Enhanced Oxygen Evolution Rate and Anti-interfacial Delamination Property of the SrCo0.9Ta0.1O3-δ@La0.6Sr0.4Co0.2Fe0.8O3-δ Oxygen-Electrode for Solid Oxide Electrolysis Cells
Interfacial delamination between the oxygen-electrode and electrolyte is a significant factor impacting the reliability of solid oxide electrolysis cells (SOECs) when operating at high voltages. The most effective method to mitigate this delamination is to decrease the interfacial oxygen partial pressure, which can be accomplished by amplifying the oxygen exsolution rate and the O2- transport rate of the oxygen-electrode. In this study, a SrCo0.9Ta0.1O3-δ (SCT) film with an outstanding oxygen surface exchange coefficient and an outstanding O2- conductivity was introduced onto the La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) surface by infiltration. This composite oxygen-electrode exhibited a notably high electrochemical catalytic activity primarily due to the significantly improved O2- transport and oxygen surface exchange rate. Single cells with a 15-LSCF oxygen-electrode achieved a peak power density of 1.33 W cm-2 at 700 °C and a current density of 1.25 A cm-2 at 1.3 V (60% H2O-H2) at 750 °C. Additionally, an electrolysis cell with a 15 wt % SCT-infiltrated LSCF oxygen-electrode demonstrated stable operation even at high current densities for over 330 h with no noticeable delamination. The remarkable durability of the 15-LSCF oxygen-electrode can be attributed to the boosted oxygen exsolution reaction (OER) activity and the suppression of Sr segregation due to SCT infiltration. The impressive OER activity and resistance to interfacial delamination make the 15-LSCF a promising candidate for a composite oxygen-electrode in SOECs.
- 31 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (45) , 52673-52685
Enhanced Oxygen Evolution Rate and Anti-interfacial Delamination Property of the SrCo0.9Ta0.1O3-δ@La0.6Sr0.4Co0.2Fe0.8O3-δ Oxygen-Electrode for Solid Oxide Electrolysis Cells
Interfacial delamination between the oxygen-electrode and electrolyte is a significant factor impacting the reliability of solid oxide electrolysis cells (SOECs) when operating at high voltages. The most effective method to mitigate this delamination is to decrease the interfacial oxygen partial pressure, which can be accomplished by amplifying the oxygen exsolution rate and the O2- transport rate of the oxygen-electrode. In this study, a SrCo0.9Ta0.1O3-δ (SCT) film with an outstanding oxygen surface exchange coefficient and an outstanding O2- conductivity was introduced onto the La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) surface by infiltration. This composite oxygen-electrode exhibited a notably high electrochemical catalytic activity primarily due to the significantly improved O2- transport and oxygen surface exchange rate. Single cells with a 15-LSCF oxygen-electrode achieved a peak power density of 1.33 W cm-2 at 700 °C and a current density of 1.25 A cm-2 at 1.3 V (60% H2O-H2) at 750 °C. Additionally, an electrolysis cell with a 15 wt % SCT-infiltrated LSCF oxygen-electrode demonstrated stable operation even at high current densities for over 330 h with no noticeable delamination. The remarkable durability of the 15-LSCF oxygen-electrode can be attributed to the boosted oxygen exsolution reaction (OER) activity and the suppression of Sr segregation due to SCT infiltration. The impressive OER activity and resistance to interfacial delamination make the 15-LSCF a promising candidate for a composite oxygen-electrode in SOECs.
- 14 December 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (12) , 14881-14890
Investigation of in Situ Co-assembled Sr(Co,Zr)O3−δ-Based Perovskite Nanocomposite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells
- 14 December 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (12) , 14881-14890
Investigation of in Situ Co-assembled Sr(Co,Zr)O3−δ-Based Perovskite Nanocomposite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells
- 18 June 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (19) , 28669-28677
Self-assembled, high-performing cobalt-free Ba0.5A0.5Fe0.8Zr0.2O3-δ (A=Sr2+/Sm3+) composite cathode for intermediate-temperature solid oxide fuel cells
- 18 June 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (19) , 28669-28677
Self-assembled, high-performing cobalt-free Ba0.5A0.5Fe0.8Zr0.2O3-δ (A=Sr2+/Sm3+) composite cathode for intermediate-temperature solid oxide fuel cells
- 7 April 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (35) , 15721-15730
Comparison of nanostructured composite cathodes synthesized by liquid self-assembly and nanosolid mechanical-mixing for solid oxide fuel cell
- 7 April 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (35) , 15721-15730
Comparison of nanostructured composite cathodes synthesized by liquid self-assembly and nanosolid mechanical-mixing for solid oxide fuel cell
- 1 March 2022
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 42 (3) , 1042-1052
Rational design of the self-assembled BaCo1-xZrxO3-δ (x = 0.8–0.2) nanocomposites as the promising low/intermediate-temperature solid oxide fuel cell cathodes
- 1 March 2022
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 42 (3) , 1042-1052
Rational design of the self-assembled BaCo1-xZrxO3-δ (x = 0.8–0.2) nanocomposites as the promising low/intermediate-temperature solid oxide fuel cell cathodes
- 1 October 2021
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 46 (74) , 36652-36662
Investigation of surficial and interfacial properties of BaCo0.4Fe0.4Zr0.1Y0.1O3-δ cathode directly on yttria-stabilized zirconia electrolyte for solid oxide fuel cell
- 1 October 2021
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 46 (74) , 36652-36662
Investigation of surficial and interfacial properties of BaCo0.4Fe0.4Zr0.1Y0.1O3-δ cathode directly on yttria-stabilized zirconia electrolyte for solid oxide fuel cell