Pranay Sarkar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pranay Sarkar has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Hifjur Raheman
Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur
6 shared publications Hifjur Raheman
3 shared publications- Ganesh Upadhyay
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering and Technology, Chaudhary Charan Singh Haryana Agricultural University, Hisar 125004, Haryana, India
2 shared publications - Abdallah Elshawadfy Elwakeel
Agricultural Engineering Department, Faculty of Agriculture and Natural Resources Aswan University Aswan Egypt
1 shared publication Ahmed Elbeltagi
1 shared publication- Ali Salem
Civil Engineering Department, Faculty of Engineering, Minia University, Minia, Egypt
1 shared publication
Latest Publications
- Open Access
- 20 March 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Development, optimization and field performance evaluation of tractor operated lathyrus (Lathyrus Sativus L.) harvester
- 20 March 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Open AccessDevelopment, optimization and field performance evaluation of tractor operated lathyrus (Lathyrus Sativus L.) harvester
- Open Access
- 1 October 2024
- Published by Taylor & Francis in International Journal of Sustainable Engineering
- Vol. 17 (1) , 806-828
Design, structural analysis and development of a walk-behind type electric cabbage harvester
- 1 October 2024
- Published by Taylor & Francis in International Journal of Sustainable Engineering
- Vol. 17 (1) , 806-828
Open AccessDesign, structural analysis and development of a walk-behind type electric cabbage harvester
- 15 May 2024
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 27 (1) , 141-155
Development of an electric cabbage harvester: an eco-friendly solution for mechanical harvesting of cabbage
- 15 May 2024
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 27 (1) , 141-155
Development of an electric cabbage harvester: an eco-friendly solution for mechanical harvesting of cabbage
- Open Access
- 3 May 2024
- Published by Elsevier in Smart Agricultural Technology
- Vol. 8
Development and performance evaluation of an electric cabbage harvester with a precise cabbage pushing mechanism
- 3 May 2024
- Published by Elsevier in Smart Agricultural Technology
- Vol. 8
Open AccessDevelopment and performance evaluation of an electric cabbage harvester with a precise cabbage pushing mechanism
- 1 January 2024
- Published by Springer Nature
- p. 591-604
Detection of Field Cabbages Using YOLOv8 Deep Learning Technique for an Electric Cabbage Harvester
- 1 January 2024
- Published by Springer Nature
- p. 591-604
Detection of Field Cabbages Using YOLOv8 Deep Learning Technique for an Electric Cabbage Harvester
- Open Access
- 28 June 2023
- Published by Elsevier in Smart Agricultural Technology
- Vol. 5
Optimization of cutting torque in a laboratory setup for harvesting cabbage following an AI-based approach
- 28 June 2023
- Published by Elsevier in Smart Agricultural Technology
- Vol. 5
Open AccessOptimization of cutting torque in a laboratory setup for harvesting cabbage following an AI-based approach
- Open Access
- 27 February 2023
- Published by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) in Spanish Journal of Agricultural Research
- Vol. 21 (1) , e0203
Development of a laboratory setup simulating cabbage harvesting mechanism and optimization of torque requirement for harvesting cabbage
Aim of study: To develop a new type of cabbage (Brassica oleracea L.) harvesting mechanism in the laboratory that can be used in small-scale cabbage harvester in Indian conditions with minimum power requirement. Area of study: Indian Institute of Technology, Kharagpur, India Material and methods: The mechanism consisted of a cutting unit, a pushing unit and a conveying unit. Two counter-rotating disc cutters were used as cutting devices. Cutting speed, forward speed and cutting position were considered as influential parameters for torque required to carry out the harvesting of cabbage. A full factorial design was followed for the experiment and response surface methodology was used to optimize these parameters for minimizing torque requirement for cutting and pushing the cabbage. Main results Torque decreased when cutting speed increased and when cutting height from the cabbage head decreased. Statistical analysis showed that cutting speed and cutting position affected the total torque significantly. The optimized cutting speed, forward speed and cutting position were found as 590 rpm, 0.25 m s-1 and 0 cm, respectively with a desirability of 0.995. A regression model was developed to predict the total torque for cutting the cabbage stem and it was validated against 10 datasets with a percentage of bias within 10%. Research highlights: The mechanism developed for cabbage harvesting could successfully cut and lift the cabbage heads in the laboratory. These optimized parameters are to be followed in the field prototype cabbage harvester for its successful operation in the field.
- 27 February 2023
- Published by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) in Spanish Journal of Agricultural Research
- Vol. 21 (1) , e0203
Open AccessDevelopment of a laboratory setup simulating cabbage harvesting mechanism and optimization of torque requirement for harvesting cabbage
Aim of study: To develop a new type of cabbage (Brassica oleracea L.) harvesting mechanism in the laboratory that can be used in small-scale cabbage harvester in Indian conditions with minimum power requirement. Area of study: Indian Institute of Technology, Kharagpur, India Material and methods: The mechanism consisted of a cutting unit, a pushing unit and a conveying unit. Two counter-rotating disc cutters were used as cutting devices. Cutting speed, forward speed and cutting position were considered as influential parameters for torque required to carry out the harvesting of cabbage. A full factorial design was followed for the experiment and response surface methodology was used to optimize these parameters for minimizing torque requirement for cutting and pushing the cabbage. Main results Torque decreased when cutting speed increased and when cutting height from the cabbage head decreased. Statistical analysis showed that cutting speed and cutting position affected the total torque significantly. The optimized cutting speed, forward speed and cutting position were found as 590 rpm, 0.25 m s-1 and 0 cm, respectively with a desirability of 0.995. A regression model was developed to predict the total torque for cutting the cabbage stem and it was validated against 10 datasets with a percentage of bias within 10%. Research highlights: The mechanism developed for cabbage harvesting could successfully cut and lift the cabbage heads in the laboratory. These optimized parameters are to be followed in the field prototype cabbage harvester for its successful operation in the field.
- Open Access
- 18 November 2021
- Published by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) in Spanish Journal of Agricultural Research
- Vol. 19 (4) , e02R01
Active-passive and passive-passive configurations of combined tillage implements for improved tillage and tractive performance: A review
Proper selection of energy-efficient agricultural machinery helps to reduce drudgery, increase cropping intensity and reduce time required for field preparation. With conventional tillage implements, multiple passes are required to obtain desired seedbed which increase soil compaction due to repeated movement of tractor in field. With combined tillage implements two or more tillage implements are combined to reduce time and fuel energy required for seedbed preparation. In this paper, various researches on active-passive and passive-passive configurations of combined tillage implements have been discussed along with their working principles. It was found that these were associated with less draft, specific energy, and tire slippage compared to conventional implements which provides a sound basis for using them with suitable engine power to improve the power utilization of tractors. Hence, use of these implements could help to reduce soil compaction, labour, fuel cost as well as save time in preparing seedbed. More analytical studies and classical approaches are needed to predict energy requirements of these implements from the knowledge of individual energy requirements of conventional implements to help in proper matching of tractor-implement and also to develop decision support systems. Considering their promising outcomes, they will emerge as effective tools to improve agricultural mechanization.
- 18 November 2021
- Published by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) in Spanish Journal of Agricultural Research
- Vol. 19 (4) , e02R01
Open AccessActive-passive and passive-passive configurations of combined tillage implements for improved tillage and tractive performance: A review
Proper selection of energy-efficient agricultural machinery helps to reduce drudgery, increase cropping intensity and reduce time required for field preparation. With conventional tillage implements, multiple passes are required to obtain desired seedbed which increase soil compaction due to repeated movement of tractor in field. With combined tillage implements two or more tillage implements are combined to reduce time and fuel energy required for seedbed preparation. In this paper, various researches on active-passive and passive-passive configurations of combined tillage implements have been discussed along with their working principles. It was found that these were associated with less draft, specific energy, and tire slippage compared to conventional implements which provides a sound basis for using them with suitable engine power to improve the power utilization of tractors. Hence, use of these implements could help to reduce soil compaction, labour, fuel cost as well as save time in preparing seedbed. More analytical studies and classical approaches are needed to predict energy requirements of these implements from the knowledge of individual energy requirements of conventional implements to help in proper matching of tractor-implement and also to develop decision support systems. Considering their promising outcomes, they will emerge as effective tools to improve agricultural mechanization.
- 1 October 2021
- Published by Elsevier in Journal of Terramechanics
- Vol. 97, 35-43
Embedded digital display and warning system of velocity ratio and wheel slip for tractor operated active tillage implements
- 1 October 2021
- Published by Elsevier in Journal of Terramechanics
- Vol. 97, 35-43
Embedded digital display and warning system of velocity ratio and wheel slip for tractor operated active tillage implements
- 12 July 2021
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series A
- Vol. 102 (3) , 861-869
A Comprehensive Review of Mechanized Cabbage Harvesting Systems and Its Present Status in India
- 12 July 2021
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series A
- Vol. 102 (3) , 861-869
A Comprehensive Review of Mechanized Cabbage Harvesting Systems and Its Present Status in India