RBRajarshi Bhattacharya

Rajarshi Bhattacharya

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rajarshi Bhattacharya has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analysis of a highly isolated MIMO antenna with slotted ground for THz applications

    by Mayuri Kulshreshtha, Rajarshi Bhattacharya

    Advances in modern communication systems have increased the demand for low-profile and high-performance antennas. In this context, multiple-input multiple-output (MIMO) antennas play a significant role in achieving high performance by mitigating the propagation losses and attenuation in the terahertz (THz) frequency spectrum. However, the key challenge is to maintain the balance between the size and isolation of antenna elements in the MIMO antenna. This communication presents a MIMO antenna (32×32μm²) designed on a silicon substrate using graphene for THz applications by investigating various diversity parameters. Defected ground structure (strategic placement of a square slot in the ground) addresses the challenge of mutual coupling in the antenna by restricting the current flow between the excitation and coupling ports. The proposed design operates at a center frequency of 4.49 THz with a simulated peak gain of 4.5 dBi and an isolation level ≈ -180dB in the operating band. The RLC-based model is developed using the Advanced Design System (ADS) to verify and demonstrate a strong correlation between modeled and simulated S-parameters. The designed antenna is an outstanding option for future 6G ultra-high-speed communication, biomedical imaging, security scanning, material spectroscopy, and astronomy.

  • Angularly Robust Ultra-Wideband Terahertz Metasurface Absorber Using Tunable Graphene Layer

    by Surajit Sur, Rajarshi Bhattacharya, Debajyoti Chatterjee

    Mitigating undesired radiation and eliminating stray radiation in a high-frequency circuit may be challenging. Ultra-high frequency (UHF) electromagnetic wave absorbers are being used innovatively in both military and commercial applications. Achieving a wide absorption band in a tiny, single-layer Terahertz absorber is challenging. Accurate determination of the absorption bandwidth for transverse electric ($T E$) and transverse magnetic ($T M$) modes is critical. This research presents polarization-independent graphene-based absorbers demonstrating near-unity absorption bands at 3.08 to 5.27 THz within the lower mid-infrared spectrum. The unit cell of the structure comprises a central square patch, four right-angle supporting patches, with gold as the substrate and silicon dioxide as the dielectric layer. An additional graphene layer was inserted between the upper layer and the dielectric material to broaden the absorption band. The absorber is unaffected by polarization when light strikes it perpendicularly due to the fourfold symmetry of the deposited graphene structure. We examined both $T E_{00}$ and $T M_{00}$ polarizations and found that they absorbed a wide spectrum of wavelengths up to an incidence angle of 65°. The prototype is deemed to be about $\sim 0.1 \lambda_{{\max}}$ in thickness for both absorbers at the lowest frequency of absorption. The unit cell's period of about $\sim 0.14 \lambda_{{\max}}$ further corroborates the effective homogeneity condition inside the subwavelength region. The proposed absorber exhibits a higher fractional bandwidth than previous studies.

  • High gain SIW integrated reconfigurable MIMO antenna in THz regime

    by Mayuri Kulshreshtha, Rajarshi Bhattacharya

    A new design of a reconfigurable multiple input multiple output (MIMO) antenna with dual-band/triple-band response is presented in this article. The graphene strips are placed above the decoupling structure near the ports to create additional resonance. Graphene changes the surface current arrangement, resulting in a reconfigurable antenna response. The proposed antenna without graphene strip resonates at resonating bands (1.66–1.81 THz), and (4.11–4.69 THz) with impedance bandwidths of 8.7%, and 13.06% respectively. The proposed antenna with graphene strip resonates at (1.62–1.77 THz), (2.55–2.70 THz), and (4.16–4.79 THz) frequencies with impedance bandwidth of 4.73%, 5.7%, and 14.12% respectively. The designed antenna offers high gain (9.6 dBi) with maximum efficiency (70%). The area of the proposed antenna is 100 × 80 μm2. The proposed structure shows excellent diversity performance including ECC, DG, TARC, and channel capacity loss across all operating bands.


  • Graphene pixel based broadband polarization insensitive THz absorber

    by Surajit Sur, Rajarshi Bhattacharya

    Suppressing undesired radiation and eliminating stray radiation in a high-frequency circuit might be challenging. Ultra-high frequency (UHF) electromagnetic wave absorbers are finding new applications in both the military and civilian domains. Obtaining an ultra-wide absorption band in a thin, single-layer Terahertz absorber becomes difficult. Also, achieving perfect absorption bandwidth on transverse electric (TE) and transverse magnetic (TM) mode is very sensitive. This paper presents a polarization-independent graphene-based absorbers with a near unity absorption band of 2.32 THz and 3.78 THz in a lower mid-infrared regime. The structure’s unit cell consists of cross-slot circular patches with Au as a ground separated by SiO2. To improve the absorption band another graphene layer was placed between the top and dielectric material. The absorber is polarization independent under normal incidence because of the deposited graphene structure’s fourfold symmetry. Both TE and TM polarizations were investigated, with wide-band absorption observed up to 60° incident angles in both cases. In terms of the lowest frequency of absorption, the prototype is deemed to be as thin as ∼ 0.1 λ max for both absorbers. Similarly, the effective homogeneity criteria in the subwavelength region are supported by the unit cell’s period of ∼ 0.1 λ max . The proposed absorber-2 shows 10 % higher FBW than existing work.


  • A polarization insensitive terahertz tri-band graphene metasurface absorber

    by Surajit Sur, Rajarshi Bhattacharya

    A graphene-based tri-band perfect metasurface absorber is presented for the far-infrared frequency range. A two-dimensional periodic pattern of graphene patches is created on a thin SiO2 dielectric layer, which is backed by a gold ground plane of sufficient thickness ( t ) ensuring zero transmission of the impinging electromagnetic (EM) wave. An array of graphene elliptical discs is placed around graphene square patches and thin graphene strips are used to connect these elliptical patches to the square patches. In terms of the lowest frequency of absorption, the proposed absorber seems to be a thin one as t ∼ λ max / 13 . It is also considered compact because the periodicity of the cells is on the order of λ max / 22 . The absorption spectrum gives three perfect absorption peaks with absorptivity greater than 99% at 5.76 and 9.06 THz. Further, the absorptivity is better than 96% at 7.86 THz. The performance of the proposed absorber remains invariant with change in polarization of the incident wave. It is revealed that this absorber performs satisfactorily throughout a broad angular range of incidence of about ± 60°.


  • Polarization-insensitive graphene-based THz rasorber with ATA characteristics

    by Mohd Farman Ali, Rajarshi Bhattacharya

    This paper presents a polarization-insensitive rasorber implemented with absorption-transmission-absorption (ATA) characteristics over three consecutive frequency ranges in the terahertz (THz) band. The proposed rasorber is made of a two-layer periodic structure. These two layers are separated by a spacer made of glass substrate. The unit cells of the top layer have a modified swastika geometry metallization, which is loaded with graphene strips to make it lossy and provide dual-band absorption. In the bottom plane frequency selective surface (FSS), a square ring is engraved on the metal layer to obtain bandpass characteristics between two stopbands provided by the top layer. The designed rasorber works in the 0.2 – 1.2 THz frequency range. It provides wideband absorption with a S 11 < − 10 dB from 0.274 to 1.094 THz with a fractional bandwidth (BW) of around 118 % . An in-band transmission window is designed with a S 21 > − 3 dB in the frequency of 0.615 to 0.719 THz provides a large BW of 104 GHz ( 15.59 % ) for THz communication. Within this transmission band, the lowest insertion loss of 0.27 dB is obtained at 0.686 THz. It provides the absorption of more than 80 % in both the lower band ( 0.276 – 0.442 THz, 46.24 % BW) and the higher band ( 0.861 – 1.094 THz, 23.83 % BW). The simulated response of the designed rasorber using a full-wave electromagnetic simulator and calculated through ECM are found to be in good agreement.


  • Open Access

    Author Index

    by Pawan Kumar Jaiswal, Rajarshi Bhattacharya, Premsai Regalla, A. Praveen Kumar, Garima Sharma, Mithilesh Kumar, Shishir Shrivastava, Aarti Bansal, Shivani Malhotra, Arun Raj, et al.