JCJose-Ramon Cerquides-Bueno

Jose-Ramon Cerquides-Bueno

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jose-Ramon Cerquides-Bueno has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Optimisation of Magnet Shape for Cogging Torque Reduction in Axial-Flux Permanent-Magnet Motors

    by Vicente Simon-Sempere, Auxiliadora Simon-Gomez, Manuel Burgos-Payan, Jose-Ramon Cerquides-Bueno

    This paper presents a new method for reduction of the cogging torque in axial flux permanent-magnet motors based on the shape of the edges of the magnets. First, starting from a previous work, developed for 2D radial flux motors, and extending it to the case of 3D axial flux motors, the new cogging torque cancellation conditions are set. From these conditions, the optimised profile of the magnets is derived, for which an original and precise method based on superposition has been developed. Furthermore, the proposed method does not need Finite Element Method (FEM) iterations to achieve the required precision, which makes it really very fast. The cancellation condition is fully compatible with the optimisation of other characteristics related to magnets, such as the waveform of the induced EMF and the torque ripple. Both the new cogging torque cancellation condition and the magnet profile design method to meet this condition constitute the main contributions of this work. The results obtained are in good agreement with those obtained by FEM simulation. Finally, the proposed method of minimising the cogging torque has been successfully validated experimentally by employing three different configurations of a single-stator single-rotor axial flux motor. The practical reduction of the obtained cogging torque is noticeable even when using non-skewed magnets and when the number of slots is an integer multiple of the number of magnets.


  • Cogging Torque Cancellation by Magnet Shaping in Surface-Mounted Permanent-Magnet Motors

    by Vicente Simon-Sempere, Manuel Burgos-Payan, Jose-Ramon Cerquides-Bueno

    This paper presents a new method for cancellation cogging torque by magnet shaping. First, the conditions to be met by the induction space wave for the total cancellation of cogging torque are analytically established. These results are then used to determine the shape of the magnets. The approach followed is inverse to that used by traditional methods, whereby, based on a predetermined shape of the magnets, the cogging torque is calculated. As a result, the proposed method enables optimum results to be obtained directly and it is generalizable to any motor configuration. The methodology has been first validated by means of finite elements and then tested experimentally on a dc motor and on an ac motor for both radial and parallel magnetization.


  • Cogging Torque Measurement Using the Electromotive Force in Surface-Mounted Permanent-Magnet Motors

    by Vicente Simon-Sempere, Manuel Burgos-Payan, Jose-Ramon Cerquides-Bueno

    This paper presents a new, fast, and inexpensive method for the measurement of the cogging torque in mass-produced surface-mounted permanent-magnet motors from the open-circuit voltage electromotive force (EMF), thereby obviating the need for mechanical torque meters. Conventional procedures involve rotating the motor at very low speed while the cogging torque measurement is performed. These procedures are very time-consuming and require expensive equipment, and hence cannot be used to verify all the units in mass production. The proposed method relates the cogging torque to EMF through the spatial induction wave in the air gap and can be fully automated in the manufacturing process without any additional time consumption. Once the foundations of the method are presented, proposals to overcome the limitations imposed by the presence of the slots and by the type of winding are addressed. The technique has been satisfactorily tested both numerically and experimentally on 40 motors, showing good agreement with the theoretical expectation.


  • Influence of Manufacturing Tolerances on the Electromotive Force in Permanent-Magnet Motors

    by Vicente Simon-Sempere, Manuel Burgos-Payan, Jose-Ramon Cerquides-Bueno

    In permanent-magnet synchronous motors it is necessary that the induced electromotive force (EMF) is as sinusoidal as possible to achieve a low torque ripple. The techniques used for this purpose require great precision in the positioning and the magnetization of the magnets, which renders them highly susceptible to errors resulting from manufacturing tolerances. This paper analyzes the effect on the EMF of four types of common production errors: magnetization level, position and width of the magnets, and angular displacement between blocks of magnets. To this end, two totally analytical statistical models have been developed: one for the first harmonics and another for high frequencies, from which design rules for the minimization of the sensitivity to errors can be drawn. The techniques developed here allow the calculation of the deviations in the EMF spectra from the information on tolerances, and reciprocally estimate manufacturing errors from EMF spectra. The proposed techniques have been tested both numerically and experimentally showing good agreement with the developed models.


  • Spatial Filtering: A Tool for Selective Harmonics Elimination in the Design of Permanent-Magnet Synchronous Motors

    by Vicente Simon-Sempere, Manuel Burgos-Payan, José-Ramón Cerquides-Bueno

    A method to model the performance of permanent-magnet synchronous motors (PMSMs) as a set of chained blocks capable of filtering in both spatial and frequential domains is introduced in this paper. The proposed tool is based on the convolution integral, which naturally connects both spatial and frequential domains in a formal way and relates the geometry of the motor directly with its frequency response. With this new instrument, the designer can easily and precisely appraise the resulting effect of any of the blocks which affect the performance of the motor. Furthermore, conversely, the designer can also synthesize the suitable modification of a block to obtain the desired performance of a motor. The analysis of the PMSM shown here is focused on, but not limited to, the generation of induced electromotive force (EMF) and of cogging torque, as the main causes of torque vibration. An experimental validation of the method has been performed showing good agreement between theoretical predictions, simulations, and experimental results. As a first practical result, this paper presents a motor design based on the analytical synthesis of a spatial filter that enables the selective elimination of EMF harmonics through geometrical arrangement of the magnets.


  • Broadcast Quality Video Contribution in Mobility

    by José Ramón Cerquides Bueno, Antonio Foncubierta Rodriguez

    The continuous growth of the available throughput, specially in the uplink of mobile phone networks is opening the doors to new services and business opportunities without references in the past. In more concrete, new standards HSDPA/HSUPA, introduced to complement and enhance 3G networks, together with the advances in audio and specially video coding, like those adopted by the standard H.264 AVC have boosted the appearance of a new service: exploiting the mobile telephony networks for contributing broadcast quality videos. This new service is offering just now a low cost, high flexibility alternative that, in a brief period of time, will substitute the current Electronic News Gathering (ENG) Units, giving rise to what is being to be called Wireless Journalism (WENG1 or WiNG2). This chapter discusses both the technologies involved and the business opportunities offered by this sector. Once reviewed the state of the art, different solutions will be compared, some of them recently appeared as commercial solutions, like QuickLink 3.5G Live Encoder3 or AirNow!4 and others still in research and development processes.

  • A Real Time Audio Fingerprinting System for Advertisement Tracking and Reporting in FM Radio

    by Jose Ramon Cerquides

    In this paper we present a system designed to detect, identify and track commercial segments transmitted by a radio station. The program is entirely written in Visual C++ and uses state of the art audio fingerprinting technologies to achieve a great performance, being able to operate several times faster than real time while keeping a moderate computational load.