Hakimeh Amanipoor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Hakimeh Amanipoor has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Sedigheh Battaleb-Looie
Department of Marine Geology, Khorramshahr University of Marine Science and Technology, Khorramshahr, Iran
10 shared publicationsS. Battaleb-Looie
Department of Geology, Khorramshahr University of Marine Science and Technology, Khorramshahr, Iran
3 shared publicationsJavad Dravishi Khatooni
Geological Survey & Mineral Exploration of Iran
2 shared publications- Kamal Ghanemi
Department of Marine Chemistry, Faculty of Marine Science, Khorramshahr University of Marine Science and Technology, Khorramshahr, Iran
2 shared publications M. Abdideh
Department of Petroleum Engineering , Omidiyeh Branch, Islamiz Azad University , Omidiyeh , Iran
2 shared publicationsMaryam Ghazanfari Shabankareh
Khorramshahr University of Marine Science and Technology
2 shared publications
Latest Publications
- 13 October 2025
- Published by Springer Nature in Carbonates and Evaporites
- Vol. 40 (4) , 141
Comparison of methods for determining the number of hydraulic flow units in a carbonate reservoir
- 13 October 2025
- Published by Springer Nature in Carbonates and Evaporites
- Vol. 40 (4) , 141
Comparison of methods for determining the number of hydraulic flow units in a carbonate reservoir
- Open Access
- 5 March 2025
- Published by Springer Nature in Applied Water Science
- Vol. 15 (4) , 1-21
Investigation of the impact of seawater intrusion on the agricultural land quality along river margins
- 5 March 2025
- Published by Springer Nature in Applied Water Science
- Vol. 15 (4) , 1-21
Open AccessInvestigation of the impact of seawater intrusion on the agricultural land quality along river margins
- Open Access
- 14 September 2023
- Published by Springer Nature in Applied Water Science
- Vol. 13 (10) , 1-20
Evaluation of heavy metal contamination using cokriging geostatistical method (case study of Abteymour oilfield in southern Iran)
- 14 September 2023
- Published by Springer Nature in Applied Water Science
- Vol. 13 (10) , 1-20
Open AccessEvaluation of heavy metal contamination using cokriging geostatistical method (case study of Abteymour oilfield in southern Iran)
- Open Access
- 22 August 2023
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 14 (1) , 41-58
Analysis of heavy metal accumulation and environmental indicators in fluids and drilling cuttings
Heavy metal pollution caused by oil well drilling operations is one of the environmental problems that the oil industry imposes on the environment. The source of such pollution should first be determined precisely to manage and control it. Studies show that the main source of environmental pollution in well drilling operations is the drilling fluid additives or the elements in the well column formations. In this research, in addition to measuring the concentration of heavy metals and comparing it with the existing standards, an attempt is made to determine the exact origin of these metals. To study the source of such pollution in the area of the Abteymour oil field in the southwest of Iran, 19 cuttings (from 8 formations), 10 waste samples (drilling mud and cutting), and 7 drilling muds and their additive samples from one of the wells were assessed to determine the concentration of heavy metals. In this study, a total of 56 elements were measured using the ICP-MS analysis method; however, 16 elements that had a higher concentration than the average of the upper crust (as a reference concentration) with Ni, Cr, and V elements were studied. These 16 elements included Fe, Ag, As, Ba, Bi, Cd, Cu, Mg, Mn, Mo, Pb, Sb, Sr, and W heavy metals, and Ca and S elements. The analysis of the examined elements' concentrations in muds and their additives revealed that samples of heavy water-based muds and barite contained the highest concentrations of the elements. The cuttings samples primarily had a higher concentration than the waste samples, which was due to the mixing of the cuttings of different depths in the waste and the dilution of the element concentration in the waste samples, according to an analysis of the variation of 19 elements compared to the depth. Among the studied formations, the Gachsaran Evaporite Formation has high concentrations of studied elements. This problem is due to the complexity of the lithology of Gachsaran Formation, which consists of all kinds of rocks such as anhydrite, gypsum, salt and marl. This result shows the importance of managing drilling operations in this formation to prevent the release of heavy metals in the environment. Based on the Igeo, Ca, Ag, As, Ba, Bi, Cd, Cu, S, Sb, and Sr elements had high levels of pollution in all samples of waste and drilling cuttings. Based on the EF, only Cr, Mn, and V elements had no enrichment, and other elements had different enrichment levels in waste and drilling cuttings samples. The main result of this study shows that the main source of heavy metal pollution in the first stage is the type of elements in the lithology of the well column formations and in the next stage is the type and additives of the drilling fluid used in the well. Specifically, in the Abteymour oil field, the main reason for the contamination of the Gachsaran formation is due to the complexity of the lithology and the use of heavy water base drilling mud. The results of this research show that before choosing the type of drilling fluid, it is necessary to do a detailed environmental study and identify heavy elements in subsurface formations and the designed drilling fluid.
- 22 August 2023
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 14 (1) , 41-58
Open AccessAnalysis of heavy metal accumulation and environmental indicators in fluids and drilling cuttings
Heavy metal pollution caused by oil well drilling operations is one of the environmental problems that the oil industry imposes on the environment. The source of such pollution should first be determined precisely to manage and control it. Studies show that the main source of environmental pollution in well drilling operations is the drilling fluid additives or the elements in the well column formations. In this research, in addition to measuring the concentration of heavy metals and comparing it with the existing standards, an attempt is made to determine the exact origin of these metals. To study the source of such pollution in the area of the Abteymour oil field in the southwest of Iran, 19 cuttings (from 8 formations), 10 waste samples (drilling mud and cutting), and 7 drilling muds and their additive samples from one of the wells were assessed to determine the concentration of heavy metals. In this study, a total of 56 elements were measured using the ICP-MS analysis method; however, 16 elements that had a higher concentration than the average of the upper crust (as a reference concentration) with Ni, Cr, and V elements were studied. These 16 elements included Fe, Ag, As, Ba, Bi, Cd, Cu, Mg, Mn, Mo, Pb, Sb, Sr, and W heavy metals, and Ca and S elements. The analysis of the examined elements' concentrations in muds and their additives revealed that samples of heavy water-based muds and barite contained the highest concentrations of the elements. The cuttings samples primarily had a higher concentration than the waste samples, which was due to the mixing of the cuttings of different depths in the waste and the dilution of the element concentration in the waste samples, according to an analysis of the variation of 19 elements compared to the depth. Among the studied formations, the Gachsaran Evaporite Formation has high concentrations of studied elements. This problem is due to the complexity of the lithology of Gachsaran Formation, which consists of all kinds of rocks such as anhydrite, gypsum, salt and marl. This result shows the importance of managing drilling operations in this formation to prevent the release of heavy metals in the environment. Based on the Igeo, Ca, Ag, As, Ba, Bi, Cd, Cu, S, Sb, and Sr elements had high levels of pollution in all samples of waste and drilling cuttings. Based on the EF, only Cr, Mn, and V elements had no enrichment, and other elements had different enrichment levels in waste and drilling cuttings samples. The main result of this study shows that the main source of heavy metal pollution in the first stage is the type of elements in the lithology of the well column formations and in the next stage is the type and additives of the drilling fluid used in the well. Specifically, in the Abteymour oil field, the main reason for the contamination of the Gachsaran formation is due to the complexity of the lithology and the use of heavy water base drilling mud. The results of this research show that before choosing the type of drilling fluid, it is necessary to do a detailed environmental study and identify heavy elements in subsurface formations and the designed drilling fluid.
- Open Access
- 6 June 2022
- Published by Springer Nature in Research Square
Assessment of heavy metal pollution using geochemical data and statistical analysis (Abteymour oilfield soils, southern Iran)
The importance of studying quaternary deposits and the soils formed on them has grown to the point where it now takes up a significant portion of research in various parts of the globe. Pollution from oil industry activities like drilling and exploitation has posed a serious threat to the soils surrounding these areas in oil-rich countries like Iran. The study area is the Abteymour oilfield in southwestern Iran, which is one of the most important oil fields in the country. As a result, it's crucial to assess its environmental impact. The soil of the Abteymour oilfield area was investigated to estimate heavy metal concentrations and determine the source of contamination in this study. The geoaccumulation index for the elements studied reveals that only a small percentage of chromium, nickel, manganese, magnesium, and sodium samples are non-contaminated to moderately contaminated. Sulfur is present in every category, unlike other samples. The vast majority of the samples examined fall into the moderate to severe pollution categories. They fall into the category of no enrichment to low enrichment when compared to other elements, based on the enrichment factor of the studied samples. There is moderate enrichment of copper, strontium, and sodium. Most elements have a low contamination factor, according to the contamination degree or contamination factor in the studied samples. Only drilling fluid, drilled formations, and extracted oil and gas are the dominant processes in the region, according to the Abteymour oilfield factor analysis. The degree of contamination, or contamination factor, in the studied samples, reveals that most elements have a low contamination factor.
- 6 June 2022
- Published by Springer Nature in Research Square
Open AccessAssessment of heavy metal pollution using geochemical data and statistical analysis (Abteymour oilfield soils, southern Iran)
The importance of studying quaternary deposits and the soils formed on them has grown to the point where it now takes up a significant portion of research in various parts of the globe. Pollution from oil industry activities like drilling and exploitation has posed a serious threat to the soils surrounding these areas in oil-rich countries like Iran. The study area is the Abteymour oilfield in southwestern Iran, which is one of the most important oil fields in the country. As a result, it's crucial to assess its environmental impact. The soil of the Abteymour oilfield area was investigated to estimate heavy metal concentrations and determine the source of contamination in this study. The geoaccumulation index for the elements studied reveals that only a small percentage of chromium, nickel, manganese, magnesium, and sodium samples are non-contaminated to moderately contaminated. Sulfur is present in every category, unlike other samples. The vast majority of the samples examined fall into the moderate to severe pollution categories. They fall into the category of no enrichment to low enrichment when compared to other elements, based on the enrichment factor of the studied samples. There is moderate enrichment of copper, strontium, and sodium. Most elements have a low contamination factor, according to the contamination degree or contamination factor in the studied samples. Only drilling fluid, drilled formations, and extracted oil and gas are the dominant processes in the region, according to the Abteymour oilfield factor analysis. The degree of contamination, or contamination factor, in the studied samples, reveals that most elements have a low contamination factor.
- Open Access
- 20 November 2021
- Published by National Taiwan Ocean University in Journal of Marine Science and Technology
- Vol. 29 (5) , 666-672
Accumulation and Bioavailability of Heavy Metals (Cadmium, Chromium, Nickel, Lead and Zinc) in Water and Sediment Samples in the Musa Creek, Northwest Coasts of the Persian Gulf
The current study aimed to investigate the total concentrations of heavy metals in water and sediment samples as well as their bioavailability in sediments of Musa Creek. Twenty samples including 10 sediments and 10 water samples were collected from 10 stations. The concentration of heavy metals was measured using inductively coupled plasma–mass spectrometry. The bioavailability of heavy metals was carried out by first step of Tessier sequential extraction method so called single extraction in the manuscript. The results showed that the mean concentrations of cadmium, chromium, nickel, and zinc in water samples was 0.17, 7.44, 43.80, and 8.85 µg/L, respectively. The concentration of lead was lower than the detection limit of the 0.1 µg/L. The positive correlation of heavy metals in water samples is due to their potential common source. The negative correlation of nickel with other elements in sediment samples indicates that, apart from the industrial activity in the region, the geogenic origin affects the concentration of metals. The factor analysis showed two components. The first component was lead, zinc, chromium, and cadmium with the common source (s) and nickel was the second component with geogenic origin. The high concentrations of heavy metals in the exchangeable phase of Tessier sequential extraction showed that the bioavailability of the elements in sediment samples, especially lead and zinc is at a high level that could be a serious threat to the aquatics of the region. Keywords: Heavy metals, Musa Creek, Bioavailability, Single extraction
- 20 November 2021
- Published by National Taiwan Ocean University in Journal of Marine Science and Technology
- Vol. 29 (5) , 666-672
Open AccessAccumulation and Bioavailability of Heavy Metals (Cadmium, Chromium, Nickel, Lead and Zinc) in Water and Sediment Samples in the Musa Creek, Northwest Coasts of the Persian Gulf
The current study aimed to investigate the total concentrations of heavy metals in water and sediment samples as well as their bioavailability in sediments of Musa Creek. Twenty samples including 10 sediments and 10 water samples were collected from 10 stations. The concentration of heavy metals was measured using inductively coupled plasma–mass spectrometry. The bioavailability of heavy metals was carried out by first step of Tessier sequential extraction method so called single extraction in the manuscript. The results showed that the mean concentrations of cadmium, chromium, nickel, and zinc in water samples was 0.17, 7.44, 43.80, and 8.85 µg/L, respectively. The concentration of lead was lower than the detection limit of the 0.1 µg/L. The positive correlation of heavy metals in water samples is due to their potential common source. The negative correlation of nickel with other elements in sediment samples indicates that, apart from the industrial activity in the region, the geogenic origin affects the concentration of metals. The factor analysis showed two components. The first component was lead, zinc, chromium, and cadmium with the common source (s) and nickel was the second component with geogenic origin. The high concentrations of heavy metals in the exchangeable phase of Tessier sequential extraction showed that the bioavailability of the elements in sediment samples, especially lead and zinc is at a high level that could be a serious threat to the aquatics of the region. Keywords: Heavy metals, Musa Creek, Bioavailability, Single extraction
- 14 June 2021
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 19 (4) , 3061-3074
Evaluation of geological hazard of the subway (case study: Ahvaz subway, southwest of Iran)
- 14 June 2021
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 19 (4) , 3061-3074
Evaluation of geological hazard of the subway (case study: Ahvaz subway, southwest of Iran)
- 1 December 2020
- Published by Springer Nature in Natural Resources Research
- Vol. 29 (6) , 3719-3741
The Effects of Industrial Wastewater on Groundwater Quality of the Boroujen Aquifer, Southwest Iran
- 1 December 2020
- Published by Springer Nature in Natural Resources Research
- Vol. 29 (6) , 3719-3741
The Effects of Industrial Wastewater on Groundwater Quality of the Boroujen Aquifer, Southwest Iran
- 13 May 2020
- Published by Taylor & Francis in Geocarto International
- Vol. 37 (4) , 1126-1138
Water quality simulation of Dez River in Iran using QUAL2KW model
The considerable increase in the contamination load and the diversity of urban, agricultural, and industrial contaminants more than ever have necessitated the need to understand the process of changes and predict the quality of water resources. In this regard, simulations are considered as important tools. In this research, the water quality of the Dez River (southwest of Iran) was simulated using the QUAL2KW model, which was calibrated using data of June 2013 from four hydrometric stations along the river. The model was validated using the data of February 2017 from the same stations. Water quality was simulated in terms of discharge, temperature, EC, and BOD parameters. The data used for the simulation included daily discharge from the dam, hydraulic properties of the river, locations of contaminant sources, regional meteorological parameters, flow rate, pollution concentrations, and coefficient of dispersion. Simulation results showed that the BOD parameter was close to critical condition at 40 km from Dez Regulating Dam due to the inflow of agricultural wastewater. The RMSE and PBIAS coefficients calculated for the model calibration showed good compatibility (95%) between the observational and predicted data; therefore, the model has good and acceptable accuracy. The impacts of agricultural activities and their contaminants, and the activities of industrial centers around the Dez River were investigated using the above outputs. The river status for EC and BOD parameters was predicted based on a minimum critical discharge scenario with the contamination load available. The results showed that with a discharge of 190 m3/s, the BOD value would be critical in 40 km of the Dez Regulating Dam. The EC value exceeded the permissible value with a discharge of 50 CMS at Bamdaj station that poses a serious threat to the environment
- 13 May 2020
- Published by Taylor & Francis in Geocarto International
- Vol. 37 (4) , 1126-1138
Water quality simulation of Dez River in Iran using QUAL2KW model
The considerable increase in the contamination load and the diversity of urban, agricultural, and industrial contaminants more than ever have necessitated the need to understand the process of changes and predict the quality of water resources. In this regard, simulations are considered as important tools. In this research, the water quality of the Dez River (southwest of Iran) was simulated using the QUAL2KW model, which was calibrated using data of June 2013 from four hydrometric stations along the river. The model was validated using the data of February 2017 from the same stations. Water quality was simulated in terms of discharge, temperature, EC, and BOD parameters. The data used for the simulation included daily discharge from the dam, hydraulic properties of the river, locations of contaminant sources, regional meteorological parameters, flow rate, pollution concentrations, and coefficient of dispersion. Simulation results showed that the BOD parameter was close to critical condition at 40 km from Dez Regulating Dam due to the inflow of agricultural wastewater. The RMSE and PBIAS coefficients calculated for the model calibration showed good compatibility (95%) between the observational and predicted data; therefore, the model has good and acceptable accuracy. The impacts of agricultural activities and their contaminants, and the activities of industrial centers around the Dez River were investigated using the above outputs. The river status for EC and BOD parameters was predicted based on a minimum critical discharge scenario with the contamination load available. The results showed that with a discharge of 190 m3/s, the BOD value would be critical in 40 km of the Dez Regulating Dam. The EC value exceeded the permissible value with a discharge of 50 CMS at Bamdaj station that poses a serious threat to the environment
- 2 October 2019
- Published by Taylor & Francis in Geocarto International
- Vol. 36 (16) , 1884-1903
Effect of salinity of irrigation water on soil properties (abadan plain, SW Iran)
To evaluate the effects of irrigation with saline water of Bahmanshir River in southwestern Iran, 11 water samples from the river in two flow and ebb periods and 22 soil samples from two depths of 0–20 and 20–40 cm were taken. The irrigation suitability indexes and Wilcox, USSL, and Doneen charts were used to determine the quality of agricultural water. The soil texture, SAR, EC, and pH parameters were used to determine soil quality. Important factors on the water quality are flow and ebb, wastewater discharge, hydrogeochemical and climatic processes. Based on the most studied indexes, water quality is classified as permissible to unsuitable. The Wilcox and USSL charts indicate that water is unsuitable for agricultural use. The Doneen chart showed that water had no effect on soil permeability. The region’s soils are mainly classified as saline-sodic and saline soils. The soil salinity depends irrigating with saline water, inappropriate irrigation approaches, and geographical and climatic conditions.
- 2 October 2019
- Published by Taylor & Francis in Geocarto International
- Vol. 36 (16) , 1884-1903
Effect of salinity of irrigation water on soil properties (abadan plain, SW Iran)
To evaluate the effects of irrigation with saline water of Bahmanshir River in southwestern Iran, 11 water samples from the river in two flow and ebb periods and 22 soil samples from two depths of 0–20 and 20–40 cm were taken. The irrigation suitability indexes and Wilcox, USSL, and Doneen charts were used to determine the quality of agricultural water. The soil texture, SAR, EC, and pH parameters were used to determine soil quality. Important factors on the water quality are flow and ebb, wastewater discharge, hydrogeochemical and climatic processes. Based on the most studied indexes, water quality is classified as permissible to unsuitable. The Wilcox and USSL charts indicate that water is unsuitable for agricultural use. The Doneen chart showed that water had no effect on soil permeability. The region’s soils are mainly classified as saline-sodic and saline soils. The soil salinity depends irrigating with saline water, inappropriate irrigation approaches, and geographical and climatic conditions.