Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yin Fan has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigating the Role of Ply Stacking Sequence in the Data-Driven Forward and Inverse Design of FRP Laminate Fatigue Life

    by Ce Ding, Jinbo Dou, Yuze Li, Yin Fan, Xiuhua Chen

    The stacking sequence of composite laminates directly determines the internal stress and strain distributions and thereby affects fatigue life. To examine differences in prediction performance among layup categories that may be obscured by overall metrics, this study develops an XGBoost-based framework for category-specific evaluation and further investigates local stacking sequence screening under fixed conditions. In addition to basic material, geometric, and loading information, we define a multilevel classification of laminate layups in the datasets. Under the 1st level classification of layup, laminates are classified as symmetric, antisymmetric, or nonsymmetric according to their symmetry with respect to the laminate mid plane, and under the 2nd level classification of layup, they are further subdivided into unidirectional, angle ply, and other types according to their angular composition. Symmetric angle ply (S-AP) and antisymmetric angle ply (AS-AP) laminates, which exhibit different forward prediction performance, are selected for inverse design case studies. Under fixed baseline conditions, angle composition, total ply number, and layup category, exhaustive enumeration and paired model-ensemble evaluation are used to identify candidate sequences with consistent predicted fatigue life improvements. Results from 10 repeated experiments show that introducing layup category information produces only limited improvement in overall performance, whereas clear prediction differences exist among categories. Under the 2nd-level classification configuration, the mean R2 values for S-AP and AS-AP are 0.885 and 0.780, respectively, differing by 0.105. Local inverse design is subsequently performed for these two categories with different forward prediction performance. The recommended S-AP and AS-AP sequences exhibit predicted fatigue life improvements of 24.90% and 14.83%, respectively, relative to their corresponding baseline predictions, with both sequences yielding longer predicted fatigue lives than the original layups. In these two cases, the category with better forward prediction performance also exhibits a larger predicted improvement and greater consistency across models. These results demonstrate the value of layup classification for analyzing category-dependent differences in prediction performance and the computational feasibility of local layup screening.

  • Open Access

    Mechanical Performance of Advanced Composite Materials and Structures (2nd Edition)

    by Yin Fan

    Outstanding mechanical performance remains a central objective across a wide range of engineering fields, including aerospace

  • Open Access

    Machine learning-enabled inverse design of bioinspired layered composite structures with maximum auxetic performance

    by Yuze Li, Rui Li, Yin Fan, Zhouyu Zheng, Hui-Shen Shen, Xiuhua Chen, Minhua Wen, James Lin, Woong-Ryeol Yu, Yeqing Wang

    Layered composite structures inspired by biological tissues can exhibit out-of-plane negative Poisson’s ratio, but identifying layups that maximize auxetic performance is challenging in high-dimensional designs. Here, we introduce an inverse design framework that searches for laminate layups with minimum Poisson’s ratio. The approach combines multi-start resampling with machine learning–guided clustering to map layup families across layer numbers. Analytical relations from laminate mechanics link ply angles to effective properties, and computer simulations with laboratory measurements validate the predicted minima. The analysis resolves three layup categories, explains how shear-strain mismatch across bonded plies drives through-thickness auxetic expansion, and shows that simple symmetry rules reduce the search space. The framework reproduces previously reported minima and uncovers layups that approach lower Poisson’s ratios under practical constraints. These results provide a physics-grounded, data-efficient route to engineer layered composite structures with strong auxetic responses and offer concise design rules for impact mitigation, vibration control, and flexible structures.


  • Open Access

    A Numerical Study on Lightning Damages and Residual Strength of CFRP Laminates Considering Delamination Induced by Thermal Stress

    by Qian-Zhi Yin, Jiapeng Bian, Yin Fan

    Most numerical studies on carbon fiber-reinforced polymer (CFRP) lightning damages fail to account for delamination, a factor that plays a significant role in the subsequent analysis of residual strength. This study establishes an electro-thermo-mechanical coupled numerical model incorporating delamination effects to predict lightning-induced damage in carbon fiber-reinforced plastic (CFRP) composites. Subsequently, parametric investigations evaluate the influence of varying input loads and stacking sequences on interlaminar pyrolysis and delamination damage, with damage assessment quantitatively conducted based on simulated post-strike uniaxial ultimate compressive loads. Post-strike uniaxial compressive strength reduction with cohesive elements is 28.91%, demonstrating closer alignment with experimental reduction (36.72%) than the 21.12% reduction predicted by the interlaminar-effect-neglecting model. Under combined thermal expansion and shockwave overpressure, the 28.91% compressive strength reduction demonstrates closer alignment with the experimental 36.72% reduction than the 25.13% reduction observed under isolated shockwave overpressure. The results highlight the critical role of thermal delamination in compressive strength reduction, with distinct waveform-dependent mechanisms: under C-waveform lightning currents, arc thermal effects cannot be neglected; D-waveform strikes exhibit predominant contributions from impact loading to delamination damage, with thermally driven delamination likewise pronounced. Increased current amplitude correlates with amplified mechanical damage severity, while premature symmetry in ply stacking sequences exacerbates compressive performance degradation. This work enhances multi-physics modeling fidelity by bridging thermal delamination and mechanical degradation pathways, offering foundational insights for optimizing lightning strike resistance in advanced aerospace composite systems.


  • Open Access

    Identification of Lighting Strike Damage and Prediction of Residual Strength of Carbon Fiber-Reinforced Polymer Laminates Using a Machine Learning Approach

    by Rui-Zi Dong, Yin Fan, Jiapeng Bian, Zhili Chen

    Due to the complex and uncertain physics of lightning strike on carbon fiber-reinforced polymer (CFRP) laminates, conventional numerical simulation methods for assessing the residual strength of lightning-damaged CFRP laminates are highly time-consuming and far from pretty. To overcome these challenges, this study proposes a new prediction method for the residual strength of CFRP laminates based on machine learning. A diverse dataset is acquired and augmented from photographs of lightning strike damage areas, C-scan images, mechanical performance data, layup details, and lightning current parameters. Original lightning strike images, preprocessed with the Sobel operator for edge enhancement, are fed into a UNet neural network using four channels to detect damaged areas. These identified areas, along with lightning parameters and layup details, are inputs for a neural network predicting the damage depth in CFRP laminates. Due to its close relation to residual strength, damage depth is then used to estimate the residual strength of lightning-damaged CFRP laminates. The effectiveness of the current method is confirmed, with the mean Intersection over Union (mIoU) achieving over 93% for damage identification, the Mean Absolute Error (MAE) reducing to 5.4% for damage depth prediction, and the Mean Relative Error (MRE) reducing to 7.6% for residual strength prediction, respectively.


  • Open Access

    A Molecular Dynamics Study on Auxetic Behaviors of Origami Graphene/Cu Nanocomposites

    by Bai-Wei Na, Hai-Ning Zhang, Yin Fan, Yeqing Wang

    Graphene is considered to be one of the most promising reinforcement phases for nanocomposites due to its unique two-dimensional planar structure with excellent mechanical properties. After the design of origami, the 2D material will obtain a negative Poisson’s ratio in the in-plane direction and become a metamaterial with unusual mechanical properties. Inspired by this, an origami pattern is adopted for graphene at an atomic scale using a molecular dynamics (MD) approach, and then origami graphene is embedded into a single-crystal copper matrix to obtain origami graphene/copper nanocomposites with auxetic behaviors. In the modeling, the periodic boundary condition is chosen to exhibit the Poisson’s ratio of the whole system. Under the isothermal–isobaric ensemble, the interactions between C-C, Cu-Cu, and C-Cu atoms are, respectively, determined by three potential functions: AIREBO, EAM, and LJ. The effect of the origami graphene/copper interfacial gap on the critical strain of incremental Poisson’s ratio, critical strain of engineering Poisson’s ratio, and moduli of the origami graphene/copper nanocomposites is studied to determine the optimum distance between the two phases. The influences of the mass fraction of carbon atom and temperature on those properties are discussed in detail after the MD model is confirmed.


  • Open Access

    Mechanical Performance of Advanced Composite Materials and Structures

    by Yin Fan

    In the realm of material science and engineering, the pursuit of lighter, stronger, and more durable materials has been an enduring quest


  • Open Access

    Challenges and Future Recommendations for Lightning Strike Damage Assessments of Composites: Laboratory Testing and Predictive Modeling

    by Yeqing Wang, Yin Fan, Olesya I. Zhupanska

    Lightning strike events pose significant challenges to the structural integrity and performance of composite materials, particularly in aerospace, wind turbine blade, and infrastructure applications. Through a meticulous examination of the state-of-the-art methodologies of laboratory testing and damage predictive modeling, this review elucidates the role of simulated lightning strike tests in providing inputs required for damage modeling and experimental data for model validations. In addition, this review provides a holistic understanding of what is there, what are current issues, and what is still missing in both lightning strike testing and modeling to enable a robust and high-fidelity predictive capability, and challenges and future recommendations are also presented. The insights gleaned from this review are poised to catalyze advancements in the safety, reliability, and durability of composite materials under lightning strike conditions, as well as to facilitate the development of innovative lightning damage mitigation strategies.