Qi Cao
Research Subjects
Qi Cao has a total of 96 co-authors. Here are the top co-authors by number of shared publications:
- Xuanhua Li
State Key Laboratory of Solidification Processing Center for Nano Energy Materials School of Materials Science and Engineering Northwestern Polytechnical University Xi'an China
10 shared publications Hui Chen
State Key Laboratory of Solidification Processing Center for Nano Energy Materials School of Materials Science and Engineering Northwestern Polytechnical University Xi'an People's Republic of China
8 shared publicationsXilai He
State Key Laboratory of Solidification Processing Center for Nano Energy Materials School of Materials Science and Engineering Northwestern Polytechnical University Xi'an People's Republic of China
7 shared publicationsGuangpeng Feng
State Key Laboratory of Solidification Processing Center for Nano Energy Materials School of Materials Science and Engineering Northwestern Polytechnical University Xi'an People's Republic of China
5 shared publicationsTong Wang
5 shared publicationsXingyu Pu
State Key Laboratory of Solidification Processing Center for Nano Energy Materials School of Materials Science and Engineering Northwestern Polytechnical University Xi´an 710072 China
5 shared publications
Latest Publications
- Open Access
- 10 November 2026
- Published by Wiley in Advanced Functional Materials
- p. e79576
Hydroxyl‐Rich Sodium Gluconate Enables Dense SAM Assembly and Enhances Conductivity in NiO x ‐Based Inverted Perovskite Solar Cells
Nickel oxide (NiO x )/self‐assembled monolayer (SAM) composite hole transport layers represent a promising configuration for inverted perovskite solar cells (IPSCs). Nevertheless, the insufficient electrical conductivity of NiO x and the limited number of binding sites on its surface lead to incomplete monolayer coverage, resulting in substantial interfacial charge losses that constrain efficiency improvements. To address these issues, we introduce hydroxyl‑rich sodium gluconate (SG) into the NiO x solution. Gluconate anions from SG modulate the electronic properties of NiO x , thereby enhancing its conductivity. Meanwhile, the abundant hydroxyl groups along the SG backbone furnish additional hydrogen‐bonding sites for the subsequent adsorption of the SAM, promoting the formation of a compact and well‐ordered interfacial molecular layer. This dense SAM not only suppresses leakage currents but also optimizes the energetic cascade at the heterojunction, ultimately enabling the resulting IPSCs to achieve a power conversion efficiency of 26.24%. During maximum‐power‐point operation under ISOS‑L‑1 protocol, the optimized device preserves 91.6% of the starting output after 1000 h. This work establishes a versatile interfacial engineering approach that overcomes limitations in both SAM assembly and charge transport, offering new opportunities for the development of highly efficient and durable IPSCs.
- 10 November 2026
- Published by Wiley in Advanced Functional Materials
- p. e79576
Open AccessHydroxyl‐Rich Sodium Gluconate Enables Dense SAM Assembly and Enhances Conductivity in NiO x ‐Based Inverted Perovskite Solar Cells
Nickel oxide (NiO x )/self‐assembled monolayer (SAM) composite hole transport layers represent a promising configuration for inverted perovskite solar cells (IPSCs). Nevertheless, the insufficient electrical conductivity of NiO x and the limited number of binding sites on its surface lead to incomplete monolayer coverage, resulting in substantial interfacial charge losses that constrain efficiency improvements. To address these issues, we introduce hydroxyl‑rich sodium gluconate (SG) into the NiO x solution. Gluconate anions from SG modulate the electronic properties of NiO x , thereby enhancing its conductivity. Meanwhile, the abundant hydroxyl groups along the SG backbone furnish additional hydrogen‐bonding sites for the subsequent adsorption of the SAM, promoting the formation of a compact and well‐ordered interfacial molecular layer. This dense SAM not only suppresses leakage currents but also optimizes the energetic cascade at the heterojunction, ultimately enabling the resulting IPSCs to achieve a power conversion efficiency of 26.24%. During maximum‐power‐point operation under ISOS‑L‑1 protocol, the optimized device preserves 91.6% of the starting output after 1000 h. This work establishes a versatile interfacial engineering approach that overcomes limitations in both SAM assembly and charge transport, offering new opportunities for the development of highly efficient and durable IPSCs.
- Open Access
- 7 November 2026
- Published by Wiley in Advanced Energy Materials
- p. e71800
Synergistic Crystallization Regulation and Defect Suppression via Dual‐Site Molecular Coordination for Efficient Inverted Perovskite Solar Cells
Defects in polycrystalline perovskite films induce carrier ion migration and recombination, restricting the efficiency and durability of inverted perovskite solar cells (PSCs). Conventional additive strategies based on ammonium salts often provide insufficient defect passivation and poor long‐term stability. Herein, (1H‐benzo[d]imidazol‐2‐yl)methanamine hydrochloride (BMHCl) serves as a multifunctional molecule regulator to cooperatively regulate defect evolution and crystallization kinetics through dual‐site molecular interactions in inverted PSCs. Benefiting from the coordinated interactions of the protonated amino group (─NH 3 + ) and electron‐rich nitrogen atoms with defective [PbI 6 ] 4− octahedra, BMHCl effectively regulates crystallization kinetics, suppresses defect formation, and alleviates residual lattice strain. Consequently, the BMHCl‐modified perovskite films exhibit enhanced crystallinity, enlarged grain sizes, optimized vertical orientation, and reduced trap density. These combined microstructural improvements facilitate charge carrier transport while suppressing non‐radiative recombination. BMHCl also produces more favorable energy‐level alignment and faster interfacial charge extraction. Consequently, the champion PSC achieves the conversion efficiency of 26.50% while demonstrating excellent operational and damp‐heat stability, retaining 87.49% and 80.52% of its initial efficiency after 1000 h at 85°C and 800 h at 85°C, 85% relative humidity, respectively. This work demonstrates a practical molecular‐interaction strategy for efficient and durable inverted PSCs based on multifunctional, dual‐site passivation and crystallization regulation.
- 7 November 2026
- Published by Wiley in Advanced Energy Materials
- p. e71800
Open AccessSynergistic Crystallization Regulation and Defect Suppression via Dual‐Site Molecular Coordination for Efficient Inverted Perovskite Solar Cells
Defects in polycrystalline perovskite films induce carrier ion migration and recombination, restricting the efficiency and durability of inverted perovskite solar cells (PSCs). Conventional additive strategies based on ammonium salts often provide insufficient defect passivation and poor long‐term stability. Herein, (1H‐benzo[d]imidazol‐2‐yl)methanamine hydrochloride (BMHCl) serves as a multifunctional molecule regulator to cooperatively regulate defect evolution and crystallization kinetics through dual‐site molecular interactions in inverted PSCs. Benefiting from the coordinated interactions of the protonated amino group (─NH 3 + ) and electron‐rich nitrogen atoms with defective [PbI 6 ] 4− octahedra, BMHCl effectively regulates crystallization kinetics, suppresses defect formation, and alleviates residual lattice strain. Consequently, the BMHCl‐modified perovskite films exhibit enhanced crystallinity, enlarged grain sizes, optimized vertical orientation, and reduced trap density. These combined microstructural improvements facilitate charge carrier transport while suppressing non‐radiative recombination. BMHCl also produces more favorable energy‐level alignment and faster interfacial charge extraction. Consequently, the champion PSC achieves the conversion efficiency of 26.50% while demonstrating excellent operational and damp‐heat stability, retaining 87.49% and 80.52% of its initial efficiency after 1000 h at 85°C and 800 h at 85°C, 85% relative humidity, respectively. This work demonstrates a practical molecular‐interaction strategy for efficient and durable inverted PSCs based on multifunctional, dual‐site passivation and crystallization regulation.
- 4 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (38) , e73572
Ultrasound‐Assisted Zwitterion Grafting on NiO x for Suppressing Self‐Assembled Monolayer Migration in Perovskite Solar Cells
Self‐assembled monolayers (SAMs) are widely used as hole‐selective materials in inverted perovskite solar cells (PSCs), yet their performance and stability are often limited by poor molecular ordering and interfacial incompatibility. Here, we present a novel ultrasonic chemical strategy to functionalize NiO x nanoparticles via anchoring the piperazine‐1,4‐bisethanesulfonic acid (PIPES) zwitterionic molecule. Ultrasonic cavitation generates hydroxyl radicals that oxidize Ni 2 + to Ni 3 + , enhancing the electrical conductivity and hole mobility of NiO x . The exposed sulfonate groups of PIPES further promote the uniform assembly and hydrogen bonding anchoring of the subsequent SAM layer [(4‐(9'‐phenyl‐9H,9'H‐[3,3'‐bicarbazole]‐9‐yl)butyl)phosphonic acid, 4PABCz]. This integrated NiO x +PIPES/4PABCz hole transport layer fosters stronger dipole formation and interfacial polarization, facilitating charge separation and transport. Consequently, the optimized devices achieve a champion power conversion efficiency (PCE) of 27.03% (with a certified steady‐state efficiency of 26.47%). Remarkably, the devices exhibit exceptional operational and thermal stability, retaining 88.2% of their initial PCE after 1000 h of continuous illumination at 85°C and 91.0% after 1200 h of thermal aging at 85°C. This work introduces a robust and effective NiO x modification strategy, providing profound insights into interfacial design for high‐performance, stable inverted PSCs.
- 4 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (38) , e73572
Ultrasound‐Assisted Zwitterion Grafting on NiO x for Suppressing Self‐Assembled Monolayer Migration in Perovskite Solar Cells
Self‐assembled monolayers (SAMs) are widely used as hole‐selective materials in inverted perovskite solar cells (PSCs), yet their performance and stability are often limited by poor molecular ordering and interfacial incompatibility. Here, we present a novel ultrasonic chemical strategy to functionalize NiO x nanoparticles via anchoring the piperazine‐1,4‐bisethanesulfonic acid (PIPES) zwitterionic molecule. Ultrasonic cavitation generates hydroxyl radicals that oxidize Ni 2 + to Ni 3 + , enhancing the electrical conductivity and hole mobility of NiO x . The exposed sulfonate groups of PIPES further promote the uniform assembly and hydrogen bonding anchoring of the subsequent SAM layer [(4‐(9'‐phenyl‐9H,9'H‐[3,3'‐bicarbazole]‐9‐yl)butyl)phosphonic acid, 4PABCz]. This integrated NiO x +PIPES/4PABCz hole transport layer fosters stronger dipole formation and interfacial polarization, facilitating charge separation and transport. Consequently, the optimized devices achieve a champion power conversion efficiency (PCE) of 27.03% (with a certified steady‐state efficiency of 26.47%). Remarkably, the devices exhibit exceptional operational and thermal stability, retaining 88.2% of their initial PCE after 1000 h of continuous illumination at 85°C and 91.0% after 1200 h of thermal aging at 85°C. This work introduces a robust and effective NiO x modification strategy, providing profound insights into interfacial design for high‐performance, stable inverted PSCs.
- 13 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (34) , e73373
Fluid‐Crystallization Synergy for >26% Efficiency Fully Ambient‐Printed SAM‐Based Perovskite Photovoltaics
While lab‐scale spin‐coating in inert environments has delivered record efficiencies for perovskite solar cells (PSCs) employing self‐assembled monolayers (SAMs), their fabrication via fully ambient‐air printing—a prerequisite for low‐cost industrialization—remains unreported. Here, we report the first PSCs exceeding 26% efficiency based on fully ambient‐air printed SAMs and perovskite films and elucidate the governing role of SAM physicochemical properties through fluid‐crystallization synergy. SAMs with higher surface energy ( γ ) flatten the perovskite ink meniscus, attenuating the temperature gradient and Marangoni stress along the gas‐liquid interface, thereby enabling more uniform perovskite deposition and smoother films. Simultaneously, γ systematically modulates perovskite crystallization by delaying nucleation onset and shifting the growth mode from continuous to instantaneous on higher‐ γ SAMs. The fluid–crystallization synergy yields a record power conversion efficiency (PCE) of 26.31% (certified 25.85%), a benchmark for all reported ambient‐air printed devices, including non‐SAM‐based counterparts. The approach further enables scalable fabrication, achieving a champion PCE of 22.3% in 13.04 cm 2 mini‐modules with over 90% performance retention after 1200 h operation under the ISOS‐L‐1 protocol. This work establishes a quantitative link between SAM physicochemical properties and perovskite fluid dynamics and crystallization thermodynamics in ambient‐air printing, providing guidance for perovskite photovoltaics toward scalable ambient manufacturing.
- 13 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (34) , e73373
Fluid‐Crystallization Synergy for >26% Efficiency Fully Ambient‐Printed SAM‐Based Perovskite Photovoltaics
While lab‐scale spin‐coating in inert environments has delivered record efficiencies for perovskite solar cells (PSCs) employing self‐assembled monolayers (SAMs), their fabrication via fully ambient‐air printing—a prerequisite for low‐cost industrialization—remains unreported. Here, we report the first PSCs exceeding 26% efficiency based on fully ambient‐air printed SAMs and perovskite films and elucidate the governing role of SAM physicochemical properties through fluid‐crystallization synergy. SAMs with higher surface energy ( γ ) flatten the perovskite ink meniscus, attenuating the temperature gradient and Marangoni stress along the gas‐liquid interface, thereby enabling more uniform perovskite deposition and smoother films. Simultaneously, γ systematically modulates perovskite crystallization by delaying nucleation onset and shifting the growth mode from continuous to instantaneous on higher‐ γ SAMs. The fluid–crystallization synergy yields a record power conversion efficiency (PCE) of 26.31% (certified 25.85%), a benchmark for all reported ambient‐air printed devices, including non‐SAM‐based counterparts. The approach further enables scalable fabrication, achieving a champion PCE of 22.3% in 13.04 cm 2 mini‐modules with over 90% performance retention after 1200 h operation under the ISOS‐L‐1 protocol. This work establishes a quantitative link between SAM physicochemical properties and perovskite fluid dynamics and crystallization thermodynamics in ambient‐air printing, providing guidance for perovskite photovoltaics toward scalable ambient manufacturing.
- Open Access
- 8 January 2026
- Published by Springer Nature in Research Square
Improved compactness of self-assembled monolayers through Coulomb interaction enables highly efficient and stable perovskite solar cells
The deposition of compact self-assembled monolayers (SAMs) presents a significant challenge in the field of inverted perovskite solar cells (PSCs). In this study, we propose a strategy to enhance the compactness of SAMs by strengthening the interactions between SAM molecules and the substrate. Specifically, lithium hydroxide is incorporated into SAM solutions to modify the charge distribution within the SAM molecules. Theoretical simulations indicate a substantial increase in Coulomb interactions among the SAM molecules and the NiO substrate, facilitating the formation of more compact SAM layers under optimized conditions. Experimental results demonstrate that the enhanced compactness significantly improves carrier transport across the SAM layers, resulting in an increase in the champion efficiency of inverted PSCs from 26.0% to 27.3% (with a certified steady-state efficiency of 27.3%). Furthermore, the devices exhibit exceptional operational stability, retaining 94.5% and 93.3% of their initial efficiency after continuous exposure to solar light for 2000 hours at 65°C and 1000 hours at 85°C, respectively, in accordance with the ISOS-L-3 protocol.
- 8 January 2026
- Published by Springer Nature in Research Square
Open AccessImproved compactness of self-assembled monolayers through Coulomb interaction enables highly efficient and stable perovskite solar cells
The deposition of compact self-assembled monolayers (SAMs) presents a significant challenge in the field of inverted perovskite solar cells (PSCs). In this study, we propose a strategy to enhance the compactness of SAMs by strengthening the interactions between SAM molecules and the substrate. Specifically, lithium hydroxide is incorporated into SAM solutions to modify the charge distribution within the SAM molecules. Theoretical simulations indicate a substantial increase in Coulomb interactions among the SAM molecules and the NiO substrate, facilitating the formation of more compact SAM layers under optimized conditions. Experimental results demonstrate that the enhanced compactness significantly improves carrier transport across the SAM layers, resulting in an increase in the champion efficiency of inverted PSCs from 26.0% to 27.3% (with a certified steady-state efficiency of 27.3%). Furthermore, the devices exhibit exceptional operational stability, retaining 94.5% and 93.3% of their initial efficiency after continuous exposure to solar light for 2000 hours at 65°C and 1000 hours at 85°C, respectively, in accordance with the ISOS-L-3 protocol.
- 27 April 2025
- Published by Elsevier in Nano Energy
- Vol. 141
Multidentate chelation defect passivation via hyperbranched polysiloxane for efficient and stable inverted perovskite solar cells
- 27 April 2025
- Published by Elsevier in Nano Energy
- Vol. 141
Multidentate chelation defect passivation via hyperbranched polysiloxane for efficient and stable inverted perovskite solar cells
- 12 October 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (3)
Enhanced Corrosion Resistance of Ag Electrode Through Ionized 2‐Mercaptobenzothiazole in Inverted Perovskite Solar Cells
The utilization of Ag electrodes in inverted perovskite solar cells (PSCs) is prevalent; however, their inherent reactivity and corrosive characteristics toward perovskite materials often lead to significant stability concerns. Here, 1‐ethyl‐3‐methyl‐1h‐imidazolium 2‐mercaptobenzothiazole (EM) ionic liquid is designed and introduce it into the bathocuproine (BCP) barrier layer to mitigate the potential chemical corrosion of the Ag electrode by the perovskite layer. EM forms multiple interaction modes through the coordination of two types of bonds, C─N, C═N, and C─S, and chelation with Ag, resulting in the formation of a dense chemical anti‐corrosion layer on the Ag surface. By raising the Ag electrode's corrosion potential and decreasing its corrosion current, the occurrence of chemical reactions and corrosion of the Ag electrode by the perovskite layer is effectively suppressed. Additionally, the ionized EM optimizes the band structure and conductivity of BCP and enhances the electron transfer capability at the electron transport layer/Ag interface. The BCP:EM‐based inverted PSCs exhibit an efficiency of 25.11% and excellent stability. Under continuous operation at 45 °C and one sun illumination, the encapsulated device maintains 85.6% of its initial efficiency after 1000 h at the maximum power point.
- 12 October 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (3)
Enhanced Corrosion Resistance of Ag Electrode Through Ionized 2‐Mercaptobenzothiazole in Inverted Perovskite Solar Cells
The utilization of Ag electrodes in inverted perovskite solar cells (PSCs) is prevalent; however, their inherent reactivity and corrosive characteristics toward perovskite materials often lead to significant stability concerns. Here, 1‐ethyl‐3‐methyl‐1h‐imidazolium 2‐mercaptobenzothiazole (EM) ionic liquid is designed and introduce it into the bathocuproine (BCP) barrier layer to mitigate the potential chemical corrosion of the Ag electrode by the perovskite layer. EM forms multiple interaction modes through the coordination of two types of bonds, C─N, C═N, and C─S, and chelation with Ag, resulting in the formation of a dense chemical anti‐corrosion layer on the Ag surface. By raising the Ag electrode's corrosion potential and decreasing its corrosion current, the occurrence of chemical reactions and corrosion of the Ag electrode by the perovskite layer is effectively suppressed. Additionally, the ionized EM optimizes the band structure and conductivity of BCP and enhances the electron transfer capability at the electron transport layer/Ag interface. The BCP:EM‐based inverted PSCs exhibit an efficiency of 25.11% and excellent stability. Under continuous operation at 45 °C and one sun illumination, the encapsulated device maintains 85.6% of its initial efficiency after 1000 h at the maximum power point.
- Top Cited PapersOpen Access
- 15 January 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (16) , e2311970
Co‐Self‐Assembled Monolayers Modified NiOx for Stable Inverted Perovskite Solar Cells
[4‐(3,6‐dimethyl‐9H‐carbazol‐9yl)butyl]phosphonic acid (Me‐4PACz) self‐assembled molecules (SAM) are an effective method to solve the problem of the buried interface of NiOx in inverted perovskite solar cells (PSCs). However, the Me‐4PACz end group (carbazole core) cannot forcefully passivate defects at the bottom of the perovskite film. Here, a Co‐SAM strategy is employed to modify the buried interface of PSCs. Me‐4PACz is doped with phosphorylcholine chloride (PC) to form a Co‐SAM to improve the monolayer coverage and reduce leakage current. The phosphate group and chloride ions (Cl−) in PC can inhibit NiOx surface defects. Meantime, the quaternary ammonium ions and Cl− in PC can fill organic cations and halogen vacancies in the perovskite film to enable defects passivation. Moreover, Co‐SAM can promote the growth of perovskite crystals, collaboratively solve the problem of buried defects, suppress nonradiative recombination, accelerate carrier transmission, and relieve the residual stress of the perovskite film. Consequently, the Co‐SAM modified devices show power conversion efficiencies as high as 25.09% as well as excellent device stability with 93% initial efficiency after 1000 h of operation under one‐sun illumination. This work demonstrates the novel approach for enhancing the performance and stability of PSCs by modifying Co‐SAM on NiOx.
- 15 January 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (16) , e2311970
Top Cited PapersOpen AccessCo‐Self‐Assembled Monolayers Modified NiOx for Stable Inverted Perovskite Solar Cells
[4‐(3,6‐dimethyl‐9H‐carbazol‐9yl)butyl]phosphonic acid (Me‐4PACz) self‐assembled molecules (SAM) are an effective method to solve the problem of the buried interface of NiOx in inverted perovskite solar cells (PSCs). However, the Me‐4PACz end group (carbazole core) cannot forcefully passivate defects at the bottom of the perovskite film. Here, a Co‐SAM strategy is employed to modify the buried interface of PSCs. Me‐4PACz is doped with phosphorylcholine chloride (PC) to form a Co‐SAM to improve the monolayer coverage and reduce leakage current. The phosphate group and chloride ions (Cl−) in PC can inhibit NiOx surface defects. Meantime, the quaternary ammonium ions and Cl− in PC can fill organic cations and halogen vacancies in the perovskite film to enable defects passivation. Moreover, Co‐SAM can promote the growth of perovskite crystals, collaboratively solve the problem of buried defects, suppress nonradiative recombination, accelerate carrier transmission, and relieve the residual stress of the perovskite film. Consequently, the Co‐SAM modified devices show power conversion efficiencies as high as 25.09% as well as excellent device stability with 93% initial efficiency after 1000 h of operation under one‐sun illumination. This work demonstrates the novel approach for enhancing the performance and stability of PSCs by modifying Co‐SAM on NiOx.
- 4 May 2023
- Published by Elsevier in Nano Energy
- Vol. 112
Stable NiOx-based inverted perovskite solar cells achieved by passivation of multifunctional star polymer
- 4 May 2023
- Published by Elsevier in Nano Energy
- Vol. 112
Stable NiOx-based inverted perovskite solar cells achieved by passivation of multifunctional star polymer
- Open Access
- 11 March 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Room temperature nondestructive encapsulation via self-crosslinked fluorosilicone polymer enables damp heat-stable sustainable perovskite solar cells
Encapsulation engineering is an effective strategy to improve the stability of perovskite solar cells. However, current encapsulation materials are not suitable for lead-based devices because of their complex encapsulation processes, poor thermal management, and inefficient lead leakage suppression. In this work, we design a self-crosslinked fluorosilicone polymer gel, achieving nondestructive encapsulation at room temperature. Moreover, the proposed encapsulation strategy effectively promotes heat transfer and mitigates the potential impact of heat accumulation. As a result, the encapsulated devices maintain 98% of the normalized power conversion efficiency after 1000 h in the damp heat test and retain 95% of the normalized efficiency after 220 cycles in the thermal cycling test, satisfying the requirements of the International Electrotechnical Commission 61215 standard. The encapsulated devices also exhibit excellent lead leakage inhibition rates, 99% in the rain test and 98% in the immersion test, owing to excellent glass protection and strong coordination interaction. Our strategy provides a universal and integrated solution for achieving efficient, stable, and sustainable perovskite photovoltaics.
- 11 March 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Open AccessRoom temperature nondestructive encapsulation via self-crosslinked fluorosilicone polymer enables damp heat-stable sustainable perovskite solar cells
Encapsulation engineering is an effective strategy to improve the stability of perovskite solar cells. However, current encapsulation materials are not suitable for lead-based devices because of their complex encapsulation processes, poor thermal management, and inefficient lead leakage suppression. In this work, we design a self-crosslinked fluorosilicone polymer gel, achieving nondestructive encapsulation at room temperature. Moreover, the proposed encapsulation strategy effectively promotes heat transfer and mitigates the potential impact of heat accumulation. As a result, the encapsulated devices maintain 98% of the normalized power conversion efficiency after 1000 h in the damp heat test and retain 95% of the normalized efficiency after 220 cycles in the thermal cycling test, satisfying the requirements of the International Electrotechnical Commission 61215 standard. The encapsulated devices also exhibit excellent lead leakage inhibition rates, 99% in the rain test and 98% in the immersion test, owing to excellent glass protection and strong coordination interaction. Our strategy provides a universal and integrated solution for achieving efficient, stable, and sustainable perovskite photovoltaics.