Aziza Ibrahim Abd El Fatah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Aziza Ibrahim Abd El Fatah has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Hesham Ahmed Metwaly Ibrahim
Department of Agricultural Zoology and Nematology, Faculty of Agriculture, Al-Azhar University, Assiut Branch, Assiut, Egypt
2 shared publications - Ibrahim A. I. Hassan
Department of Chemistry, Faculty of Science, Qena University, Qena, Egypt
2 shared publications Soaad M. Elashry
Nuclear Materials Authority, Cairo, Egypt
2 shared publicationsA. R. Bakry
Nuclear Materials Authority, El Maadi, Cairo, Egypt
1 shared publicationE. A. Manaa
Nuclear Materials Authority, El Maadi, Cairo, Egypt
1 shared publicationM. Demerdash
Nuclear Materials Authority, El Maadi, Cairo, Egypt
1 shared publication
Latest Publications
- Open Access
- 20 October 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 33032
Comparative molluscicidal activity of Fe2O3 and CuO nanoparticles against the harmful herbivorous snail Theba pisana
This study addresses the increasing agricultural impact of Theba pisana , a destructive terrestrial snail pest that causes significant crop damage worldwide. The study aimed to synthesize and evaluate the molluscicidal activity of iron oxide (Fe 2 O 3 ) and copper oxide (CuO) nanoparticles against this species. Fe 2 O 3 nanoparticles were biosynthesized using Punica granatum seed extract as potential alternative reducing and stabilizing agent under mild conditions, while CuO nanoparticles were prepared by thermal decomposition of CuCO 3 at 500 °C for 2 h. The synthesized nanoparticles were characterized using SEM, XRD, FTIR, and EDX analyses. Their molluscicidal activity was assessed against the target snail species under laboratory conditions using the leaf-dipping technique. The results demonstrated that CuO nanoparticles exhibited higher toxicity than Fe 2 O 3 , as indicated by lower LC 50 values (455.32 ppm for CuO and 703.61 ppm for Fe 2 O 3 ). Mortality increased with concentration and exposure time. These findings highlight the greater molluscicidal activity of CuO nanoparticles and suggest their potential integration into integrated pest management (IPM) programs for the control of terrestrial snails.
- 20 October 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 33032
Open AccessComparative molluscicidal activity of Fe2O3 and CuO nanoparticles against the harmful herbivorous snail Theba pisana
This study addresses the increasing agricultural impact of Theba pisana , a destructive terrestrial snail pest that causes significant crop damage worldwide. The study aimed to synthesize and evaluate the molluscicidal activity of iron oxide (Fe 2 O 3 ) and copper oxide (CuO) nanoparticles against this species. Fe 2 O 3 nanoparticles were biosynthesized using Punica granatum seed extract as potential alternative reducing and stabilizing agent under mild conditions, while CuO nanoparticles were prepared by thermal decomposition of CuCO 3 at 500 °C for 2 h. The synthesized nanoparticles were characterized using SEM, XRD, FTIR, and EDX analyses. Their molluscicidal activity was assessed against the target snail species under laboratory conditions using the leaf-dipping technique. The results demonstrated that CuO nanoparticles exhibited higher toxicity than Fe 2 O 3 , as indicated by lower LC 50 values (455.32 ppm for CuO and 703.61 ppm for Fe 2 O 3 ). Mortality increased with concentration and exposure time. These findings highlight the greater molluscicidal activity of CuO nanoparticles and suggest their potential integration into integrated pest management (IPM) programs for the control of terrestrial snails.
- 27 June 2026
- Published by Springer Nature in Biological Trace Element Research
- Vol. 204 (10) , 1-13
Multifunctional in Vitro Biological Activities of Mixed Light Rare Earth Oxides: Antioxidant, Enzyme Inhibitory and Cytotoxic Potential
Light rare earth oxides (LREEs), such as cerium, lanthanum, neodymium, and praseodymium oxides, have unique redox and catalytic properties that may contribute to various therapeutic effects. Researchers in this study looked at LREEs' in vitro antioxidant, anti-diabetic, anti-Alzheimer's, anti-arthritic, and cytotoxic effects. The antioxidant potential was evaluated using Diphenyl-2-picryl-hydrazyl (DPPH), 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), nitric oxide (NO), hydroxyl (OH), and hydrogen peroxide (H2O2) radical scavenging assays, showing a moderate inhibitory effect compared to ascorbic acid. Enzyme inhibition assays indicated weak AChE inhibition, suggesting limited anti-Alzheimer's disease potential. Moderate anti-arthritic effects were observed through inhibition of protein denaturation and proteinase activity. In anti-diabetic assays, LREEs dose-dependently inhibited α-amylase and α-glucosidase, although less potent than acarbose. Cytotoxicity testing on HepG2 cancer cells showed an IC50 of 281.80 µg/mL, significantly higher than doxorubicin (34.07 µg/mL), indicating weak anticancer potential. Elevated Caspase-3 levels and diminished Bcl-2 levels indicate the initiation of apoptosis. These results indicate that LREEs oxide exhibits adequate biological activity, warranting further exploration of its mechanisms and potential biomedical applications. The investigated material was evaluated as a mixed light rare earth oxide system to obtain an integrated biological response profile rather than to determine the contribution of individual oxide components. Therefore, the present findings represent system-level biological behaviour and serve as a foundation for more detailed component-specific investigations. The investigated material was evaluated as a mixed light rare earth oxide system to obtain an integrated biological response profile rather than to determine the contribution of individual oxide components. Therefore, the present findings represent system-level biological behaviour and serve as a foundation for more detailed component-specific investigations. Graphical Abstract
- 27 June 2026
- Published by Springer Nature in Biological Trace Element Research
- Vol. 204 (10) , 1-13
Multifunctional in Vitro Biological Activities of Mixed Light Rare Earth Oxides: Antioxidant, Enzyme Inhibitory and Cytotoxic Potential
Light rare earth oxides (LREEs), such as cerium, lanthanum, neodymium, and praseodymium oxides, have unique redox and catalytic properties that may contribute to various therapeutic effects. Researchers in this study looked at LREEs' in vitro antioxidant, anti-diabetic, anti-Alzheimer's, anti-arthritic, and cytotoxic effects. The antioxidant potential was evaluated using Diphenyl-2-picryl-hydrazyl (DPPH), 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), nitric oxide (NO), hydroxyl (OH), and hydrogen peroxide (H2O2) radical scavenging assays, showing a moderate inhibitory effect compared to ascorbic acid. Enzyme inhibition assays indicated weak AChE inhibition, suggesting limited anti-Alzheimer's disease potential. Moderate anti-arthritic effects were observed through inhibition of protein denaturation and proteinase activity. In anti-diabetic assays, LREEs dose-dependently inhibited α-amylase and α-glucosidase, although less potent than acarbose. Cytotoxicity testing on HepG2 cancer cells showed an IC50 of 281.80 µg/mL, significantly higher than doxorubicin (34.07 µg/mL), indicating weak anticancer potential. Elevated Caspase-3 levels and diminished Bcl-2 levels indicate the initiation of apoptosis. These results indicate that LREEs oxide exhibits adequate biological activity, warranting further exploration of its mechanisms and potential biomedical applications. The investigated material was evaluated as a mixed light rare earth oxide system to obtain an integrated biological response profile rather than to determine the contribution of individual oxide components. Therefore, the present findings represent system-level biological behaviour and serve as a foundation for more detailed component-specific investigations. The investigated material was evaluated as a mixed light rare earth oxide system to obtain an integrated biological response profile rather than to determine the contribution of individual oxide components. Therefore, the present findings represent system-level biological behaviour and serve as a foundation for more detailed component-specific investigations. Graphical Abstract
- Open Access
- 27 March 2023
- Published by Qeios Ltd
Review of: "How to search for patents on the recovery of rare earth metals from electronic waste"
1- The word How to in the title of the manuscript is not representing the specialty of the work done and could be replaced by studying on the search for…… 2- In page (8), Fig. (2), add the items of the colored points in the figure. 3- Add final con...
- 27 March 2023
- Published by Qeios Ltd
Open AccessReview of: "How to search for patents on the recovery of rare earth metals from electronic waste"
1- The word How to in the title of the manuscript is not representing the specialty of the work done and could be replaced by studying on the search for…… 2- In page (8), Fig. (2), add the items of the colored points in the figure. 3- Add final con...
- 17 July 2022
- Published by Egyptian Knowledge Bank in Egyptian Journal of Chemistry
- Vol. 65 (13) , 661-668
The Utmost Extraction of some individual rare earth elements from Monazite Mineral Acidic Leach Liquor by solvent and ion exchange techniques
This paper focused on the extraction of Nd (III) from acidic leach liquor obtained after monazite mineral opening by concentrated H2SO4 solution. Extraction behaviors of REEs were studied by examining extractant concentration, and the influences of experimental parameters. Total REEs in the Pregnant Leach Solution (PLS) were separated as Ce, La, Nd and Pr into the organic phases by solvent extraction (SX) process using tri butyl phosphate (TBP) as the most effective extractant. By the 5th stage of SX process, 55.94, 11.48, 14.97 and 7.61 % purity of Ce, La, Nd and Pr respectively was separated from the (PLS) by 50 vol. % TBP in kerosene, stripped by 3M NH4NO3 solution, at 0.2 pH for 5 minutes at room temperature. The mechanism of REEs extraction from the pregnant leach solution was studied for separation of light REEs and middle REEs. The produced LREEs were dissolved in concentrated HCl followed by pH adjustment to 1.8 passed in column of Dowex 50 -X8. REEs load is then eluted through the Cu-form resin column using 0.5 M Citric acid solution adjusted to pH of 3.9. Neodymium concentrates with ~ 99.9, 99.5, 98, 97.1% purity and 50, 80, 81, 82.5 % recovery can be obtained according to marketing or further chemical or technical approaches for the fractions obtained.
- 17 July 2022
- Published by Egyptian Knowledge Bank in Egyptian Journal of Chemistry
- Vol. 65 (13) , 661-668
The Utmost Extraction of some individual rare earth elements from Monazite Mineral Acidic Leach Liquor by solvent and ion exchange techniques
This paper focused on the extraction of Nd (III) from acidic leach liquor obtained after monazite mineral opening by concentrated H2SO4 solution. Extraction behaviors of REEs were studied by examining extractant concentration, and the influences of experimental parameters. Total REEs in the Pregnant Leach Solution (PLS) were separated as Ce, La, Nd and Pr into the organic phases by solvent extraction (SX) process using tri butyl phosphate (TBP) as the most effective extractant. By the 5th stage of SX process, 55.94, 11.48, 14.97 and 7.61 % purity of Ce, La, Nd and Pr respectively was separated from the (PLS) by 50 vol. % TBP in kerosene, stripped by 3M NH4NO3 solution, at 0.2 pH for 5 minutes at room temperature. The mechanism of REEs extraction from the pregnant leach solution was studied for separation of light REEs and middle REEs. The produced LREEs were dissolved in concentrated HCl followed by pH adjustment to 1.8 passed in column of Dowex 50 -X8. REEs load is then eluted through the Cu-form resin column using 0.5 M Citric acid solution adjusted to pH of 3.9. Neodymium concentrates with ~ 99.9, 99.5, 98, 97.1% purity and 50, 80, 81, 82.5 % recovery can be obtained according to marketing or further chemical or technical approaches for the fractions obtained.
- Open Access
- 30 April 2022
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 32 (7) , 2793-2805
La (III) Separation by Tri Octyl Phosphine Oxide (Cyanex 921) Based on Amberlite Xad-4 Chelating Resin
The novel core–shell type polymeric supports with accessible phosphorus groups were synthesised in the search for new reactive materials designed for the synthesis of functional resins. Amberlite XAD-4 adsorbent was impregnated with tri octyl phosphine oxides (Cyanex 921), which were then polymerized in the polymer carrier structure. The syntheses were evaluated by capturing FT-IR spectra, SEM micrographs, and analysing the sorption process. Batch studies were conducted to study the influence of some factors like pH, contact time, the metal ions concentration, and temperature on sorption efficiency of La (III) ions. The results showed that the optimum conditions were at pH equal to 0.5 and an equilibrium contact time of 30 min. According to the results of the sorption data analysis, the pseudo-second-order and Langmuir models were better fitted than the other estimated models. The sorption capacity of La (III) ions into impregnated resin as adsorbent martial was 54.25 mg g−1. The results revealed that the used adsorbent has been used successfully as a promising material for the elimination and recovery of La ions from the aqueous solutions. The impregnated resin exhibits a high chemical stability, reusability and fast equilibration. Further, the above procedure has been successfully employed for the application of real sample.
- 30 April 2022
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 32 (7) , 2793-2805
Open AccessLa (III) Separation by Tri Octyl Phosphine Oxide (Cyanex 921) Based on Amberlite Xad-4 Chelating Resin
The novel core–shell type polymeric supports with accessible phosphorus groups were synthesised in the search for new reactive materials designed for the synthesis of functional resins. Amberlite XAD-4 adsorbent was impregnated with tri octyl phosphine oxides (Cyanex 921), which were then polymerized in the polymer carrier structure. The syntheses were evaluated by capturing FT-IR spectra, SEM micrographs, and analysing the sorption process. Batch studies were conducted to study the influence of some factors like pH, contact time, the metal ions concentration, and temperature on sorption efficiency of La (III) ions. The results showed that the optimum conditions were at pH equal to 0.5 and an equilibrium contact time of 30 min. According to the results of the sorption data analysis, the pseudo-second-order and Langmuir models were better fitted than the other estimated models. The sorption capacity of La (III) ions into impregnated resin as adsorbent martial was 54.25 mg g−1. The results revealed that the used adsorbent has been used successfully as a promising material for the elimination and recovery of La ions from the aqueous solutions. The impregnated resin exhibits a high chemical stability, reusability and fast equilibration. Further, the above procedure has been successfully employed for the application of real sample.
- 29 September 2021
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 57 (8) , 1187-1197
Uranium extraction from nitrate media using amine functionalized poly acrylate hydrogel / nano silica
Sorption of U (VI) onto novel nano material of amine functionalized poly acrylate hydrogel/nano silica was investigated. In the preparation, tri octyl amine, cyclohexane, poly acrylic acid oleic acid mixed with sodium meta silicate and tri ethanol amine to yield nano particles of amine functionalized poly acrylate hydrogel/nano silica. The capability of the newly adsorbent for uranium sorption was estimated using various controlling variables such as medium pH, uranium concentration, equilibrium time, reaction temperature and the interfering ions. The experimental results showed that, rather than chloride or sulfate, the proper loading capacity was achieved at uranyl nitrate species at pH 1 for 30 minutes stirring at 60°C. Where, the loading capacity was 372.52 mg/g. The pseudo-second-order mechanism fit the U (VI) adsorption kinetics on the sorbent material well, the mechanism of intra-particle diffusion governed the sorption process, and the adsorption equilibrium followed the Langmuir model. The thermodynamic parameters calculated ∆S°, ∆G°, and ∆H°, which indicate that U (VI) sorption process is thermodynamically advantageous, spontaneous, and endothermic. It is a promising and efficient nano adsorbent that could be used for upscaling design and application for U (VI) separation from acidified monazite leach liquor.
- 29 September 2021
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 57 (8) , 1187-1197
Uranium extraction from nitrate media using amine functionalized poly acrylate hydrogel / nano silica
Sorption of U (VI) onto novel nano material of amine functionalized poly acrylate hydrogel/nano silica was investigated. In the preparation, tri octyl amine, cyclohexane, poly acrylic acid oleic acid mixed with sodium meta silicate and tri ethanol amine to yield nano particles of amine functionalized poly acrylate hydrogel/nano silica. The capability of the newly adsorbent for uranium sorption was estimated using various controlling variables such as medium pH, uranium concentration, equilibrium time, reaction temperature and the interfering ions. The experimental results showed that, rather than chloride or sulfate, the proper loading capacity was achieved at uranyl nitrate species at pH 1 for 30 minutes stirring at 60°C. Where, the loading capacity was 372.52 mg/g. The pseudo-second-order mechanism fit the U (VI) adsorption kinetics on the sorbent material well, the mechanism of intra-particle diffusion governed the sorption process, and the adsorption equilibrium followed the Langmuir model. The thermodynamic parameters calculated ∆S°, ∆G°, and ∆H°, which indicate that U (VI) sorption process is thermodynamically advantageous, spontaneous, and endothermic. It is a promising and efficient nano adsorbent that could be used for upscaling design and application for U (VI) separation from acidified monazite leach liquor.
- Open Access
- 1 June 2021
- Published by Pleiades Publishing Ltd in Radiochemistry
- Vol. 63 (3) , 297-306
Recovery of Uranium and Rare Earth Elements from Western Desert Phosphate Rocks with EDTA and Nitric Acid Solutions
Dissolution of uranium and rare earth elements from the Abu-Tartur phosphate rocks, Egypt using a mixed EDTA + nitric acid solution was studied. The effect of factors such as particle size, EDTA and nitric acid concentrations, agitation time, solid to liquid ratio, and dissolution temperature was studied, and the dissolution conditions were optimized. The optimized dissolution conditions were applied to a representative sample of the weathered rock assaying 1067 ppm rare earth elements. Before being processed, the representative sample was completely characterized using mineralogical and chemical analyses. From the obtained leach liquor, uranium was recovered by anion exchange with Duolite A 101D resin, and after uranium adsorption the rare elements were recovered by cation exchange with Dowex 50W-X8 resin.
- 1 June 2021
- Published by Pleiades Publishing Ltd in Radiochemistry
- Vol. 63 (3) , 297-306
Open AccessRecovery of Uranium and Rare Earth Elements from Western Desert Phosphate Rocks with EDTA and Nitric Acid Solutions
Dissolution of uranium and rare earth elements from the Abu-Tartur phosphate rocks, Egypt using a mixed EDTA + nitric acid solution was studied. The effect of factors such as particle size, EDTA and nitric acid concentrations, agitation time, solid to liquid ratio, and dissolution temperature was studied, and the dissolution conditions were optimized. The optimized dissolution conditions were applied to a representative sample of the weathered rock assaying 1067 ppm rare earth elements. Before being processed, the representative sample was completely characterized using mineralogical and chemical analyses. From the obtained leach liquor, uranium was recovered by anion exchange with Duolite A 101D resin, and after uranium adsorption the rare elements were recovered by cation exchange with Dowex 50W-X8 resin.
- Open Access
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 975 (1) , 012022
Commercial approach for highly pure thorium from Egyptian monazite mineral acid process
Thorium has a special interest in the future nuclear energy as a fuel especially the breeder reactors. The present research has been fulfilled throughout successive research schedule manner on separation and purification of thorium from Egyptian beach monazite mineral after its acid digestion. Monazite mineral was digested with sulfuric acid 96% at 220°C for 2.5h and dissolute with ice water (1:15), the clear solution precipitated with ammonia solution 16.5% at pH 1to produce thorium pyrophosphate with 45% thorium content in case of ideal optimized whole process. The purification was carried out after the caustafication and leaching with hydrochloric acid followed by the addition of oxalic acid at pH 0.3-0.4 to produce thorium oxalate with 91.68 % purity. Thorium oxalate was transformed to oxide by caustafication then washed and separated and dissolute by hydrochloric acid. Highly pure thorium salt was attained with the addition of thiosulphate salt on the produced faint chloride solution under 0.1 to maximum 0.5 phosphate content to produce 99% purity.
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 975 (1) , 012022
Open AccessCommercial approach for highly pure thorium from Egyptian monazite mineral acid process
Thorium has a special interest in the future nuclear energy as a fuel especially the breeder reactors. The present research has been fulfilled throughout successive research schedule manner on separation and purification of thorium from Egyptian beach monazite mineral after its acid digestion. Monazite mineral was digested with sulfuric acid 96% at 220°C for 2.5h and dissolute with ice water (1:15), the clear solution precipitated with ammonia solution 16.5% at pH 1to produce thorium pyrophosphate with 45% thorium content in case of ideal optimized whole process. The purification was carried out after the caustafication and leaching with hydrochloric acid followed by the addition of oxalic acid at pH 0.3-0.4 to produce thorium oxalate with 91.68 % purity. Thorium oxalate was transformed to oxide by caustafication then washed and separated and dissolute by hydrochloric acid. Highly pure thorium salt was attained with the addition of thiosulphate salt on the produced faint chloride solution under 0.1 to maximum 0.5 phosphate content to produce 99% purity.