Zehra Gül Morçimen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zehra Gül Morçimen has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Aylin Şendemir
Ege University
4 shared publications Aylin Sendemir
Department of Bioengineering, Graduate School of Natural and Applied Sciences, Ege University, Turkey; Department of Biomedical Technologies, Graduate School of Natural and Applied Sciences, Ege University, Turkey
2 shared publications- Ayşe Doğan
EGE ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ, BİYOMEDİKAL TEKNOLOJİLER ANABİLİM DALI (DİSİPLİNLERARASI)
2 shared publications - Busranur Senol
EGE ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ, BİYOMEDİKAL TEKNOLOJİLER ANABİLİM DALI (DİSİPLİNLERARASI)
2 shared publications - Elif Esin Hameş
Izmir Institute of Technology, Urla, Gülbahce, Urla, İzmir, 35430, Turkey
2 shared publications - Mehmet Emin Senol
EGE ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ, BİYOMEDİKAL TEKNOLOJİLER ANABİLİM DALI (DİSİPLİNLERARASI)
2 shared publications
Latest Publications
- 5 March 2026
- Published by Field Crops Central Research Institute in Tarla Bitkileri Merkez Arastirma Enstitusu
- No. 35
Design of PLGA nanofiber wound dressing enriched with Echinacea purpurea extract and in vitro characterization
Electrospun nanofiber wound dressings potentially provide a highly suitable environment for healing compared to traditional wound dressings, which often fail to meet all the requirements of the wound healing process. This study aimed to develop PLGA nanofibers incorporating silver nanoparticles containing Echinacea extract for use as wound dressings; to perform their characterization tests, and evaluate their wound healing efficacy using in vitro models. Echinacea silver nanoparticles were synthesized using a green synthesis method. PLGA, silver nanoparticle containing PLGA (AgNP/PLGA), 1%, 2%, 3%, Echinacea silver nanoparticle containing PLGA (Ec-AgNP/PLGA) nanofibers were produced by electrospinning method. The nanofibers were characterized by SEM, FTIR, XRD and antibacterial analysis and evaluated using an in vitro wound scratch test. The average zone diameters of Ec-AgNP/PLGA nanofibers against the E. coli and S. aureus bacteria were found to be 13.5±0.3 mm. The antioxidant capacity analysis of the Echinacea extract used in the study was evaluated by the DPPH (2,2-diphenyl-1-picrylhydrazyl) method and the percentage of DPPH radical removal was calculated as 46.8% and the ascorbic acid equivalent was determined as 35.5 µM. The results demonstrated that Echinacea significantly accelerated wound healing due to its therapeutic and antioxidant properties.
- 5 March 2026
- Published by Field Crops Central Research Institute in Tarla Bitkileri Merkez Arastirma Enstitusu
- No. 35
Design of PLGA nanofiber wound dressing enriched with Echinacea purpurea extract and in vitro characterization
Electrospun nanofiber wound dressings potentially provide a highly suitable environment for healing compared to traditional wound dressings, which often fail to meet all the requirements of the wound healing process. This study aimed to develop PLGA nanofibers incorporating silver nanoparticles containing Echinacea extract for use as wound dressings; to perform their characterization tests, and evaluate their wound healing efficacy using in vitro models. Echinacea silver nanoparticles were synthesized using a green synthesis method. PLGA, silver nanoparticle containing PLGA (AgNP/PLGA), 1%, 2%, 3%, Echinacea silver nanoparticle containing PLGA (Ec-AgNP/PLGA) nanofibers were produced by electrospinning method. The nanofibers were characterized by SEM, FTIR, XRD and antibacterial analysis and evaluated using an in vitro wound scratch test. The average zone diameters of Ec-AgNP/PLGA nanofibers against the E. coli and S. aureus bacteria were found to be 13.5±0.3 mm. The antioxidant capacity analysis of the Echinacea extract used in the study was evaluated by the DPPH (2,2-diphenyl-1-picrylhydrazyl) method and the percentage of DPPH radical removal was calculated as 46.8% and the ascorbic acid equivalent was determined as 35.5 µM. The results demonstrated that Echinacea significantly accelerated wound healing due to its therapeutic and antioxidant properties.
- Open Access
- 24 September 2025
- Published by Elsevier in Biomaterials
- Vol. 327, 123739
Engineering biomimetic tissue barrier models on chips: From design and fabrication to applications in disease modeling and drug screening
- 24 September 2025
- Published by Elsevier in Biomaterials
- Vol. 327, 123739
Open AccessEngineering biomimetic tissue barrier models on chips: From design and fabrication to applications in disease modeling and drug screening
- 1 September 2025
- Published by American Vacuum Society in Biointerphases
- Vol. 20 (5)
Bacterial cellulose nanofibers reinforced with chitosan/poly-γ-glutamic acid complex for cartilage tissue scaffolding
Tissue engineering offers a promising route to treat cartilage damage caused by trauma or aging due to factors that limit regenerative capacity, such as tissue avascularity, limited nerve fiber distribution, and low cell-to-matrix ratio. It aims to repair hyaline cartilage by introducing chondrocytes or chondrocyte-differentiated stem cells within biocompatible scaffold. This study aimed to develop a composite tissue scaffold with enhanced mechanical strength and the ability to mimic the extracellular matrix of cartilage tissue by forming chitosan and γ-polyglutamic acid (γ-PGA) polyelectrolyte complexes (PECs) in shredded bacterial cellulose (BC). PECs at C:P molar ratios of 30:70, 50:50, and 70:30 were combined with BC at 0.25% and 0.5% w/v. FTIR confirmed characteristic peaks of BC, chitosan, and γ-PGA in the scaffolds. Water-holding capacity (WHC) increased significantly in the BCn-50P50 scaffolds. BC incorporation modulated PEC pore size and distribution most prominently in C30P70 and C70P30, while, overall, scaffolds exhibited a predominant pore-size range of 50–300 μm. Mechanical testing showed bidirectional reinforcement: PECs enhanced the elastic modulus of the BC, and, conversely, BC increased the elastic modulus of PECs. In vitro, all composite scaffolds were biocompatible and BC0.5-C50P50 scaffolds exhibited the best chondrogenic differentiation at day 7 compared to control (p = 0.0015). To our knowledge, this is the first composite scaffold in which PEC forms within BC nanofibers. The composites improved mechanical performance and WHC, expand surface area for cell adhesion, and support chondrogenic differentiation of mesenchymal stem cells.
- 1 September 2025
- Published by American Vacuum Society in Biointerphases
- Vol. 20 (5)
Bacterial cellulose nanofibers reinforced with chitosan/poly-γ-glutamic acid complex for cartilage tissue scaffolding
Tissue engineering offers a promising route to treat cartilage damage caused by trauma or aging due to factors that limit regenerative capacity, such as tissue avascularity, limited nerve fiber distribution, and low cell-to-matrix ratio. It aims to repair hyaline cartilage by introducing chondrocytes or chondrocyte-differentiated stem cells within biocompatible scaffold. This study aimed to develop a composite tissue scaffold with enhanced mechanical strength and the ability to mimic the extracellular matrix of cartilage tissue by forming chitosan and γ-polyglutamic acid (γ-PGA) polyelectrolyte complexes (PECs) in shredded bacterial cellulose (BC). PECs at C:P molar ratios of 30:70, 50:50, and 70:30 were combined with BC at 0.25% and 0.5% w/v. FTIR confirmed characteristic peaks of BC, chitosan, and γ-PGA in the scaffolds. Water-holding capacity (WHC) increased significantly in the BCn-50P50 scaffolds. BC incorporation modulated PEC pore size and distribution most prominently in C30P70 and C70P30, while, overall, scaffolds exhibited a predominant pore-size range of 50–300 μm. Mechanical testing showed bidirectional reinforcement: PECs enhanced the elastic modulus of the BC, and, conversely, BC increased the elastic modulus of PECs. In vitro, all composite scaffolds were biocompatible and BC0.5-C50P50 scaffolds exhibited the best chondrogenic differentiation at day 7 compared to control (p = 0.0015). To our knowledge, this is the first composite scaffold in which PEC forms within BC nanofibers. The composites improved mechanical performance and WHC, expand surface area for cell adhesion, and support chondrogenic differentiation of mesenchymal stem cells.
- Open Access
- 21 August 2025
- Published by Field Crops Central Research Institute in Tarla Bitkileri Merkez Arastirma Enstitusu
- Vol. 34 (SI) , 66-72
Development of PLGA wound dressing containing silver nanoparticles synthesized from licorice extract
Nanofiber wound dressings are developed using various polymers and adding different active agents to the polymers during the production phase. In this study, PLGA, PLGA containing silver nanoparticles (AgNP/PLGA), PLGA nanofibers containing 1%, 2%, 3% licorice root, and silver nanoparticle doped (LR-AgNP/PLGA) were produced by electrospinning method. The green synthesis method was used to produce licorice-containing silver nanoparticles (LR-AgNP). The morphological analysis of nanofibers was determined using diameter measurements on SEM images. The average fiber diameters of PLGA, AgNP/PLGA, and LR-AgNP/PLGA nanofibers are 344 nm, 260 nm, and 357 nm, respectively. FTIR analysis was used for the determination of chemical bonds. The FTIR graph of PLGA, AgNP/PLGA and LR-AgNP/PLGA nanofibers showed similar peaks in the 3008-2883 cm-1, 1500-1412 cm-1, 1181-1086 cm-1 and 1755-1750 cm-1 bands. The wound healing potential of the produced nanofibers was evaluated on an in vitro wound scratch model. According to the results obtained, LR-AgNP/PLGA nanofibers showed the fastest wound closure. As a result of these studies, it was determined that PLGA nanofibers with silver nanoparticles containing licorice root extract could accelerate the wound healing process.
- 21 August 2025
- Published by Field Crops Central Research Institute in Tarla Bitkileri Merkez Arastirma Enstitusu
- Vol. 34 (SI) , 66-72
Open AccessDevelopment of PLGA wound dressing containing silver nanoparticles synthesized from licorice extract
Nanofiber wound dressings are developed using various polymers and adding different active agents to the polymers during the production phase. In this study, PLGA, PLGA containing silver nanoparticles (AgNP/PLGA), PLGA nanofibers containing 1%, 2%, 3% licorice root, and silver nanoparticle doped (LR-AgNP/PLGA) were produced by electrospinning method. The green synthesis method was used to produce licorice-containing silver nanoparticles (LR-AgNP). The morphological analysis of nanofibers was determined using diameter measurements on SEM images. The average fiber diameters of PLGA, AgNP/PLGA, and LR-AgNP/PLGA nanofibers are 344 nm, 260 nm, and 357 nm, respectively. FTIR analysis was used for the determination of chemical bonds. The FTIR graph of PLGA, AgNP/PLGA and LR-AgNP/PLGA nanofibers showed similar peaks in the 3008-2883 cm-1, 1500-1412 cm-1, 1181-1086 cm-1 and 1755-1750 cm-1 bands. The wound healing potential of the produced nanofibers was evaluated on an in vitro wound scratch model. According to the results obtained, LR-AgNP/PLGA nanofibers showed the fastest wound closure. As a result of these studies, it was determined that PLGA nanofibers with silver nanoparticles containing licorice root extract could accelerate the wound healing process.
- Open Access
- 17 September 2024
- Published by Wiley
Three-Dimensional (3D) systems provide a more realistic tool to model Parkinson’s Disease (PD) in vitro
Parkinson’s Disease (PD), which exhibits a rapidly developing pathology, is one of the most devastating neurodegenerative diseases. To understand its molecular and cellular mechanisms and to attain a truly effective treatment, it is essential to develop standard, rapid, and reliable in vitro testing platforms for diseases. Classical two-dimensional (2D) cell culture is the starting point for the study of PD diagnosis and treatment. However, 2D grown cells do not exhibit the physiological properties of native tissues and provide limited data for testing drugs in vitro and understanding the mechanisms of diseases. Therefore, realistic 3D models similar to human physiology are required. In this study, the 2D and 3D PD modeling potentials of two cell lines (SHSY5Y and PC12), which are frequently used in neural tissue engineering studies, were compared. PD models generated by SHSY5Y and PC12 cells were evaluated by lactate dehydrogenase (LDH), Live&Dead, immunofluorescence, and quantitative reverse transcription polymerase chain reaction (qRT-PCR) analyses. It was determined that PC12 cells had weaker adherence properties than SHSY5Y cells, and therefore, SHSY5Y cells had higher microtissue formation potential. PC12 cells completely lost their dopaminergic properties in 3D conditions, whereas 6-OHDA applied SHSY5Y microtissues showed PD markers related to neurotoxicity. A practical and useful 3D disease model reflecting the characteristics of PD with SHSY5Y cells is presented.
- 17 September 2024
- Published by Wiley
Open AccessThree-Dimensional (3D) systems provide a more realistic tool to model Parkinson’s Disease (PD) in vitro
Parkinson’s Disease (PD), which exhibits a rapidly developing pathology, is one of the most devastating neurodegenerative diseases. To understand its molecular and cellular mechanisms and to attain a truly effective treatment, it is essential to develop standard, rapid, and reliable in vitro testing platforms for diseases. Classical two-dimensional (2D) cell culture is the starting point for the study of PD diagnosis and treatment. However, 2D grown cells do not exhibit the physiological properties of native tissues and provide limited data for testing drugs in vitro and understanding the mechanisms of diseases. Therefore, realistic 3D models similar to human physiology are required. In this study, the 2D and 3D PD modeling potentials of two cell lines (SHSY5Y and PC12), which are frequently used in neural tissue engineering studies, were compared. PD models generated by SHSY5Y and PC12 cells were evaluated by lactate dehydrogenase (LDH), Live&Dead, immunofluorescence, and quantitative reverse transcription polymerase chain reaction (qRT-PCR) analyses. It was determined that PC12 cells had weaker adherence properties than SHSY5Y cells, and therefore, SHSY5Y cells had higher microtissue formation potential. PC12 cells completely lost their dopaminergic properties in 3D conditions, whereas 6-OHDA applied SHSY5Y microtissues showed PD markers related to neurotoxicity. A practical and useful 3D disease model reflecting the characteristics of PD with SHSY5Y cells is presented.
- Open Access
- 25 February 2024
- Published by Springer Nature in Cellulose
- Vol. 31 (5) , 2921-2935
Fabrication of porous bone scaffolds using degradable and mouldable bacterial cellulose
Bacterial cellulose (BC) is a biomaterial extensively studied in tissue engineering due to its favorable properties. Porosity, biocompatibility, biodegradability and mechanical durability are essential material properties for scaffold use in tissue engineering. This study aims to fabricate porous scaffolds using a moldable and degradable BC-HAp composite for bone tissue engineering. BC was produced by Komagataeibacter sucrofermentans under static culture conditions. The harvested BC membranes were purified and then mechanically shredded. BC oxidation was performed using different sodium periodate concentrations (0.05–0.5 M) and treatment times (0.5–12 h). Oxidized BCs (oxBC) were modified with hydroxyapatite (HAp), then were moulded, lyophilized, and characterized. The degradability of the scaffolds was determined for 45 days. Cytotoxic analysis of oxBC scaffolds was carried out for 7 days using the L929 fibroblast cell line. The oxidation degrees of the shredded BC samples were between 6.75 and 81%, which increased in line with the increasing concentration and application time of periodate. The scaffolds prepared using oxidized cellulose for 30 and 60 min (oxBC30 and oxBC60) preserved their integrity, These scaffolds showed a weight loss of 9% and 14% in 45 days, respectively. The pore distribution was between 50 and 450 µm and concentrated in the 50–150 µm range. The compression moduli were 88.72 kPa and 138.88 kPa for oxBC30-HAp and oxBC60-HAp, respectively. It was determined that oxBC did not show a significant difference in cell viability compared to the control groups and was not cytotoxic. In conclusion, degradable and more porous bone scaffolds were fabricated using mouldable oxBC.
- 25 February 2024
- Published by Springer Nature in Cellulose
- Vol. 31 (5) , 2921-2935
Open AccessFabrication of porous bone scaffolds using degradable and mouldable bacterial cellulose
Bacterial cellulose (BC) is a biomaterial extensively studied in tissue engineering due to its favorable properties. Porosity, biocompatibility, biodegradability and mechanical durability are essential material properties for scaffold use in tissue engineering. This study aims to fabricate porous scaffolds using a moldable and degradable BC-HAp composite for bone tissue engineering. BC was produced by Komagataeibacter sucrofermentans under static culture conditions. The harvested BC membranes were purified and then mechanically shredded. BC oxidation was performed using different sodium periodate concentrations (0.05–0.5 M) and treatment times (0.5–12 h). Oxidized BCs (oxBC) were modified with hydroxyapatite (HAp), then were moulded, lyophilized, and characterized. The degradability of the scaffolds was determined for 45 days. Cytotoxic analysis of oxBC scaffolds was carried out for 7 days using the L929 fibroblast cell line. The oxidation degrees of the shredded BC samples were between 6.75 and 81%, which increased in line with the increasing concentration and application time of periodate. The scaffolds prepared using oxidized cellulose for 30 and 60 min (oxBC30 and oxBC60) preserved their integrity, These scaffolds showed a weight loss of 9% and 14% in 45 days, respectively. The pore distribution was between 50 and 450 µm and concentrated in the 50–150 µm range. The compression moduli were 88.72 kPa and 138.88 kPa for oxBC30-HAp and oxBC60-HAp, respectively. It was determined that oxBC did not show a significant difference in cell viability compared to the control groups and was not cytotoxic. In conclusion, degradable and more porous bone scaffolds were fabricated using mouldable oxBC.
- 23 June 2023
- Published by Hacettepe University in Hacettepe Journal of Biology and Chemistry
COMPARISION OF THE GLIO-PROTECTIVE EFFECTS OF BIOPOLYMER COATED ELECTROSPUN SCAFFOLDS
Gliosis is a condition that plays a negative role in various neurological pathologies. In this study, it was aimed to obtain and compare the glio-protective effects of electrospun fibrous scaffolds coated by different biopolymers. First, in vitro gliosis model was obtained by inducing U-87 MG cells with LPS and IFN-γ. The optimized model was applied to U-87 MG cells grown on polycaprolactone (PCL), hyaluronic acid (HA) coated, gelatin coated, and collagen coated PCL scaffolds. Immunofluorescent (IF) staining was performed with glial fibrillary acidic protein (GFAP) antibody to determine the level of gliosis. It was found that 5µg/mL LPS concentration induced gliosis and hyaluronic acid-coated PCL scaffolds have shown a protective effect on gliosis.
- 23 June 2023
- Published by Hacettepe University in Hacettepe Journal of Biology and Chemistry
COMPARISION OF THE GLIO-PROTECTIVE EFFECTS OF BIOPOLYMER COATED ELECTROSPUN SCAFFOLDS
Gliosis is a condition that plays a negative role in various neurological pathologies. In this study, it was aimed to obtain and compare the glio-protective effects of electrospun fibrous scaffolds coated by different biopolymers. First, in vitro gliosis model was obtained by inducing U-87 MG cells with LPS and IFN-γ. The optimized model was applied to U-87 MG cells grown on polycaprolactone (PCL), hyaluronic acid (HA) coated, gelatin coated, and collagen coated PCL scaffolds. Immunofluorescent (IF) staining was performed with glial fibrillary acidic protein (GFAP) antibody to determine the level of gliosis. It was found that 5µg/mL LPS concentration induced gliosis and hyaluronic acid-coated PCL scaffolds have shown a protective effect on gliosis.
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 19, 40-46
Investıgatıon of the Adherence and Prolıferatıon Characterıstıcs of SH-SY5Y Neuron Model Cells on Graphene Foam Surfaces
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 19, 40-46
Investıgatıon of the Adherence and Prolıferatıon Characterıstıcs of SH-SY5Y Neuron Model Cells on Graphene Foam Surfaces