Camila da Silva Turini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Camila da Silva Turini has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Evaldo Martins Pires
Universidade Federal de Mato Grosso, Brazil
5 shared publications - Roberto Carlos Beber
Programa de Pós-Graduação em Biotecnologia e Biodiversidade—Rede Pró Centro-Oeste, Universidade Federal do Mato Grosso, Campus Sinop, Av. Alexandre Ferronato, 1200, Sinop 78550-728, MT, Brazil
4 shared publications - Roberta Martins Nogueira
Universidade Federal de Mato Grosso, Brasil
3 shared publications - Vinicius Carrillo Beber
Fraunhofer-Institute for Manufacturing Technology and Advanced Materials (IFAM), Wiener Straße 12, D-28359 Bremen, Germany
3 shared publications - Roberta Martins Nogueira
Campus Sinop, Universidade Federal do Mato Grosso, Av. Alexandre Ferronato, 1200, Sinop 78550-728, MT, Brazil
2 shared publications - Brenda F. Silva
Universidade Federal de Uberlândia – UFU, Brasil
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Biology
- Vol. 86, e302085
Amylolytic enzyme potential of corn kernels subjected to different germination processes
Corn is one of Brazil's main agricultural commodities and has high industrial potential, mainly due to its starch, the main reserve substance. Malting, a process involving controlled germination followed by drying, triggers a series of biochemical reactions that promote the activation of hydrolytic enzymes, especially amylases, responsible for the mobilization of starch into simple sugars. This study aimed to investigate the amylolytic enzyme potential of corn kernels subjected to different germination processes, with and without prior maceration, over 120 hours. Physiological viability, water content, enzymatic activity, and total starch, amylose, and amylopectin contents were evaluated. The results showed that the grains had high initial physiological quality, with more than 80% normal seedlings. Prior maceration anticipated root protrusion and promoted greater enzyme activity in the first hours, reaching 2,173.49 mgAR gmalt−1 in 84 hours, while in grains germinated without maceration, the activity increased progressively, reaching a maximum 1,759.44 mgAR gmalt−1, followed by a slight decrease after 108 hours. A gradual reduction in starch, amylose, and amylopectin contents was observed in both treatments, confirming the action of amylolytic enzymes in the degradation of energy reserves. Both processes, without maceration and with prior maceration, were efficient, but suggest different applications depending on their purpose. Corn malt obtained without maceration can be considered for bakery products and food formulations, while malt subjected to prior maceration, due to its higher enzymatic activity and, consequently, higher content of fermentable sugars, is more suitable for the production of fermented beverages and first-generation ethanol. Thus, corn malt stands out as a technological, versatile, and sustainable alternative for use in functional foods, baking, fermented beverages, and biofuels.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Biology
- Vol. 86, e302085
Open AccessAmylolytic enzyme potential of corn kernels subjected to different germination processes
Corn is one of Brazil's main agricultural commodities and has high industrial potential, mainly due to its starch, the main reserve substance. Malting, a process involving controlled germination followed by drying, triggers a series of biochemical reactions that promote the activation of hydrolytic enzymes, especially amylases, responsible for the mobilization of starch into simple sugars. This study aimed to investigate the amylolytic enzyme potential of corn kernels subjected to different germination processes, with and without prior maceration, over 120 hours. Physiological viability, water content, enzymatic activity, and total starch, amylose, and amylopectin contents were evaluated. The results showed that the grains had high initial physiological quality, with more than 80% normal seedlings. Prior maceration anticipated root protrusion and promoted greater enzyme activity in the first hours, reaching 2,173.49 mgAR gmalt−1 in 84 hours, while in grains germinated without maceration, the activity increased progressively, reaching a maximum 1,759.44 mgAR gmalt−1, followed by a slight decrease after 108 hours. A gradual reduction in starch, amylose, and amylopectin contents was observed in both treatments, confirming the action of amylolytic enzymes in the degradation of energy reserves. Both processes, without maceration and with prior maceration, were efficient, but suggest different applications depending on their purpose. Corn malt obtained without maceration can be considered for bakery products and food formulations, while malt subjected to prior maceration, due to its higher enzymatic activity and, consequently, higher content of fermentable sugars, is more suitable for the production of fermented beverages and first-generation ethanol. Thus, corn malt stands out as a technological, versatile, and sustainable alternative for use in functional foods, baking, fermented beverages, and biofuels.
- Open Access
- 19 March 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (6) , 2741
Effect of Plant Part and Age on the Proximate, Chemical, and Elemental Characteristics of Elephant Grass Cultivar BRS Capiaçu for Combustion-Based Sustainable Bioenergy
Elephant grass is an outstanding crop biomass for sustainable energy generation. Here, the effect of plant parts (stem, leaf, and whole plant) at four ages (90, 120, 150, and 180 days) on the proximate, chemical, and elemental characteristics of elephant grass cultivar BRS Capiaçu is investigated. From proximate analysis, the heating value is dependent on the water content regardless of plant part and age. A linear model allowing the prediction of heating value solely based on water content is derived from measurements. Density is modelled as a quadratic function of water content across ages and plant parts. Such a model can be used to predict the moisture-dependent weight of the biomass and its parts. Cellulose content is at the upper bound of benchmark values found in the literature. The highest lignin content, which tends to increase with age, is found in the stem. From elemental analysis, a much higher mineral content increasing with age is produced by the leaf. Contrarily, significantly lower mineral content is generated by the stem, bottoming out at 180 days. This is reflected in five predictive indices for slagging and fouling, which suggest that the stem at 180 days is the optimal part and age for energy purposes.
- 19 March 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (6) , 2741
Open AccessEffect of Plant Part and Age on the Proximate, Chemical, and Elemental Characteristics of Elephant Grass Cultivar BRS Capiaçu for Combustion-Based Sustainable Bioenergy
Elephant grass is an outstanding crop biomass for sustainable energy generation. Here, the effect of plant parts (stem, leaf, and whole plant) at four ages (90, 120, 150, and 180 days) on the proximate, chemical, and elemental characteristics of elephant grass cultivar BRS Capiaçu is investigated. From proximate analysis, the heating value is dependent on the water content regardless of plant part and age. A linear model allowing the prediction of heating value solely based on water content is derived from measurements. Density is modelled as a quadratic function of water content across ages and plant parts. Such a model can be used to predict the moisture-dependent weight of the biomass and its parts. Cellulose content is at the upper bound of benchmark values found in the literature. The highest lignin content, which tends to increase with age, is found in the stem. From elemental analysis, a much higher mineral content increasing with age is produced by the leaf. Contrarily, significantly lower mineral content is generated by the stem, bottoming out at 180 days. This is reflected in five predictive indices for slagging and fouling, which suggest that the stem at 180 days is the optimal part and age for energy purposes.
- Open Access
NON-CONVENTIONAL BIOMASSES FOR BRIQUETTE MANUFACTURING: DENSIFICATION PARAMETERS AND QUALITY
The objective of this study was to produce and evaluate briquettes from residues of corn crops and from its association with cotton crop residues, rice husk or elephant grass for energetic use. Data on moisture, immediate chemical analysis, bulk density, higher calorific value (HCV), energetic density, volumetric expansion and mechanical strength were used to compare the treatments. Biomass was densified at 125ºC under 15 MPa of pressure for 8 minutes. HCV results were similar for all treatments. The immediate chemical analysis showed high VC and FCC for all treatments. The highest AC was observed in briquets with 20% of rice husk (4.22%) and the lowest in briquets from corn crop residues (2.67%). The apparent density of briquets ranged from 0.96 to 1.10 t.m-3 and the energetic density from 17.53 and 20.27 GJ.m-3. All treatments delivered moderate volumetric expansion, with a maximum of 14.5% by corn crop residue briquets. Water absorptions were similar for all treatments. Mechanical strength by diametrical compression revealed desirable behavior by undefined breaking points. Data demonstrate the energetic potential of solid biofuels produced by the densification of corn crop residues, as well as their mixtures in different proportions with cotton crop residues, rice husk and Elephant grass. Keywords: alternative fuel; biomass; densification; energetic use. Biomassas não convencionais para fabricação de briquetes: parâmetros de densificação e qualidade RESUMO: O objetivo deste trabalho foi produzir e avaliar briquetes a partir de resíduos da cultura do milho e sua associação com resíduos da cultura do algodão, casca de arroz ou capim elefante para uso energético. Dados de umidade, análise química imediata, densidade aparente, poder calorífico superior (HHV), densidade energética, expansão volumétrica e resistência mecânica foram utilizados para comparação dos tratamentos. A biomassa foi densificada a 125ºC sob pressão de 15 MPa por 8 minutos. Os resultados do HCV foram semelhantes para todos os tratamentos. A análise química imediata mostrou VC e FCC elevados para todos os tratamentos. A maior AC foi observada nos briquetes com 20% de casca de arroz (4,22%) e a menor nos briquetes de resíduos da cultura do milho (2,67%). A densidade aparente dos briquetes variou de 0,96 a 1,10 t.m-3 e a densidade energética de 17,53 e 20,27 GJ.m-3. Todos os tratamentos proporcionaram expansão volumétrica moderada, com máximo de 14,5% de briquetes de resíduos da cultura do milho. As absorções de água foram semelhantes para todos os tratamentos. A resistência mecânica por compressão diametral revelou comportamento desejável por ponto de ruptura indefinido. Os dados demonstram o potencial energético dos biocombustíveis sólidos produzidos pelo adensamento dos resíduos da cultura do milho, bem como suas misturas em diferentes proporções com resíduos da cultura do algodão, casca de arroz e capim elefante. Palavras-chave: combustíveis alternativos; biomassa; adensamento; aproveitamento energético.
Open AccessNON-CONVENTIONAL BIOMASSES FOR BRIQUETTE MANUFACTURING: DENSIFICATION PARAMETERS AND QUALITY
The objective of this study was to produce and evaluate briquettes from residues of corn crops and from its association with cotton crop residues, rice husk or elephant grass for energetic use. Data on moisture, immediate chemical analysis, bulk density, higher calorific value (HCV), energetic density, volumetric expansion and mechanical strength were used to compare the treatments. Biomass was densified at 125ºC under 15 MPa of pressure for 8 minutes. HCV results were similar for all treatments. The immediate chemical analysis showed high VC and FCC for all treatments. The highest AC was observed in briquets with 20% of rice husk (4.22%) and the lowest in briquets from corn crop residues (2.67%). The apparent density of briquets ranged from 0.96 to 1.10 t.m-3 and the energetic density from 17.53 and 20.27 GJ.m-3. All treatments delivered moderate volumetric expansion, with a maximum of 14.5% by corn crop residue briquets. Water absorptions were similar for all treatments. Mechanical strength by diametrical compression revealed desirable behavior by undefined breaking points. Data demonstrate the energetic potential of solid biofuels produced by the densification of corn crop residues, as well as their mixtures in different proportions with cotton crop residues, rice husk and Elephant grass. Keywords: alternative fuel; biomass; densification; energetic use. Biomassas não convencionais para fabricação de briquetes: parâmetros de densificação e qualidade RESUMO: O objetivo deste trabalho foi produzir e avaliar briquetes a partir de resíduos da cultura do milho e sua associação com resíduos da cultura do algodão, casca de arroz ou capim elefante para uso energético. Dados de umidade, análise química imediata, densidade aparente, poder calorífico superior (HHV), densidade energética, expansão volumétrica e resistência mecânica foram utilizados para comparação dos tratamentos. A biomassa foi densificada a 125ºC sob pressão de 15 MPa por 8 minutos. Os resultados do HCV foram semelhantes para todos os tratamentos. A análise química imediata mostrou VC e FCC elevados para todos os tratamentos. A maior AC foi observada nos briquetes com 20% de casca de arroz (4,22%) e a menor nos briquetes de resíduos da cultura do milho (2,67%). A densidade aparente dos briquetes variou de 0,96 a 1,10 t.m-3 e a densidade energética de 17,53 e 20,27 GJ.m-3. Todos os tratamentos proporcionaram expansão volumétrica moderada, com máximo de 14,5% de briquetes de resíduos da cultura do milho. As absorções de água foram semelhantes para todos os tratamentos. A resistência mecânica por compressão diametral revelou comportamento desejável por ponto de ruptura indefinido. Os dados demonstram o potencial energético dos biocombustíveis sólidos produzidos pelo adensamento dos resíduos da cultura do milho, bem como suas misturas em diferentes proporções com resíduos da cultura do algodão, casca de arroz e capim elefante. Palavras-chave: combustíveis alternativos; biomassa; adensamento; aproveitamento energético.
- Open Access
Elephant Grass Cultivar BRS Capiaçu as Sustainable Biomass for Energy Generation in the Amazon Biome of the Mato Grosso State
Sustainable biomasses are vital to ensure preservation of the Amazon biome within the Mato Grosso State whilst enabling energy generation for the region and its population. Here, the potential of the elephant grass cultivar BRS Capiaçu as an alternative to replace native forest wood as biomass for energy generation is investigated, considering the whole process from plant cultivation to biomass characterisation in terms of productivity of green and dry mass per hectare; density, moisture, ash, volatile and fixed carbon content, as well as higher heating value (HHV). MANOVA indicates that the effects of plant parts and age on density and proximate analysis parameters are influenced by the plant parts and age interaction, whereas HHV can be considered similar between them. The cultivar BRS Capiaçu showed suitable energetic values (17,922 < HHV < 18,918 kJ.kg−1) compared to that of native Amazon wood. Energetic results combined with cultivation outputs of high productivity (dry mass production of 44.1 tonnes.ha−1 at 180 days) with a short cutting interval (3 months), adaptation to the region’s climate and soil, and the possibility of cultivation in areas currently consolidated for agriculture demonstrate the potential of BRS Capiaçu as biomass to reduce native wood usage and deforestation rates.
Open AccessElephant Grass Cultivar BRS Capiaçu as Sustainable Biomass for Energy Generation in the Amazon Biome of the Mato Grosso State
Sustainable biomasses are vital to ensure preservation of the Amazon biome within the Mato Grosso State whilst enabling energy generation for the region and its population. Here, the potential of the elephant grass cultivar BRS Capiaçu as an alternative to replace native forest wood as biomass for energy generation is investigated, considering the whole process from plant cultivation to biomass characterisation in terms of productivity of green and dry mass per hectare; density, moisture, ash, volatile and fixed carbon content, as well as higher heating value (HHV). MANOVA indicates that the effects of plant parts and age on density and proximate analysis parameters are influenced by the plant parts and age interaction, whereas HHV can be considered similar between them. The cultivar BRS Capiaçu showed suitable energetic values (17,922 < HHV < 18,918 kJ.kg−1) compared to that of native Amazon wood. Energetic results combined with cultivation outputs of high productivity (dry mass production of 44.1 tonnes.ha−1 at 180 days) with a short cutting interval (3 months), adaptation to the region’s climate and soil, and the possibility of cultivation in areas currently consolidated for agriculture demonstrate the potential of BRS Capiaçu as biomass to reduce native wood usage and deforestation rates.
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 51 (11)
Enzymatic hydrolysis of carbohydrates in by-products of processed rice
Over post-harvest steps of rice, from pre-cleaning to processing, a large amount of by-product is generated. Some of these by-products, due to their high starch and fiber content can be used in ethanol production. The objective was to evaluate the effect of enzymatic hydrolysis conditions on the production of reducing sugars, from pre-cleaning residue and type III paddy rice, as well as the effect of the pre-treatment of its fibers, targeting the use of these residues in ethanol fuel production. The proximate analysis was performed, followed by the pre-treatment of samples. Enzymatic hydrolysis was conducted in two ways: using one enzyme at a time or applying them simultaneously. The starch content was 41.18 and 53.41%; the fibers were 30.44 and 23.39%, of which 6.53 and 4.41% were lignin, for the pre-cleaning residue and paddy rice, respectively. Alkaline pre-treatment reduce lignin content by 47.94 and 18.23% for the pre-cleaning residue and type III paddy rice, respectively. Hydrolysis efficiency was 22.61 and 15.32% for the cellulase enzyme, and 82.18 and 87.07% for the amylolytic enzymes in the pre-cleaning residue and type III paddy rice, respectively. The hydrolysis with the separated enzymes presented higher reducing sugar yields. Therefore, the pre-cleaning residue and type III paddy rice can be used for ethanol production by its enzymatic hydrolysis, aiming to add value and to increase the sustainability of the rice production chain.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 51 (11)
Open AccessEnzymatic hydrolysis of carbohydrates in by-products of processed rice
Over post-harvest steps of rice, from pre-cleaning to processing, a large amount of by-product is generated. Some of these by-products, due to their high starch and fiber content can be used in ethanol production. The objective was to evaluate the effect of enzymatic hydrolysis conditions on the production of reducing sugars, from pre-cleaning residue and type III paddy rice, as well as the effect of the pre-treatment of its fibers, targeting the use of these residues in ethanol fuel production. The proximate analysis was performed, followed by the pre-treatment of samples. Enzymatic hydrolysis was conducted in two ways: using one enzyme at a time or applying them simultaneously. The starch content was 41.18 and 53.41%; the fibers were 30.44 and 23.39%, of which 6.53 and 4.41% were lignin, for the pre-cleaning residue and paddy rice, respectively. Alkaline pre-treatment reduce lignin content by 47.94 and 18.23% for the pre-cleaning residue and type III paddy rice, respectively. Hydrolysis efficiency was 22.61 and 15.32% for the cellulase enzyme, and 82.18 and 87.07% for the amylolytic enzymes in the pre-cleaning residue and type III paddy rice, respectively. The hydrolysis with the separated enzymes presented higher reducing sugar yields. Therefore, the pre-cleaning residue and type III paddy rice can be used for ethanol production by its enzymatic hydrolysis, aiming to add value and to increase the sustainability of the rice production chain.