FAFrancis Kwaku Asiam

Francis Kwaku Asiam

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Francis Kwaku Asiam has a total of 26 co-authors. Here are the top co-authors by number of shared publications:

  • Jae-Joon Lee

    Research Center for Photoenergy Harvesting & Conversion Technology (phct) Department of Energy & Materials Engineering Dongguk University Seoul Republic of Korea

    7 shared publications
  • Ashok Kumar Kaliamurthy

    Research Center for Photoenergy Harvesting & Conversion Technology (phct) Department of Energy & Materials Engineering Dongguk University Seoul Republic of Korea

    4 shared publications
  • Mahbubur Rahman

    Department of Energy Materials Science and Engineering Konkuk University Chungju Republic of Korea

    4 shared publications
  • Sanjay Sandhu

    Research Center for Photoenergy Harvesting & Conversion Technology (phct) Department of Energy & Materials Engineering Dongguk University Seoul Republic of Korea

    4 shared publications
  • Appiagyei Ewusi Mensah

    Research Center for Photoenergy Harvesting & Conversion Technology (phct) Department of Energy & Materials Engineering Dongguk University Seoul Republic of Korea

    3 shared publications
  • Ashok Kumar Kaliamurthy

    Research Center for Photoenergy Harvesting & Conversion Technology (phct), Department of Energy and Materials Engineering, Dongguk University, 04620 Seoul, Republic of Korea

    3 shared publications

Latest Publications

  • 3D/1D Heterostructure Perovskite Engineering via 1D TMSPbI 3 Templated Growth Toward Improved Efficiency and Moisture Stability in Solar Cells

    by Farihatun Jannat Lima, Sanjay Sandhu, Appiagyei Ewusi Mensah, Mahbubur Rahman, Saif Ahmed, Ashok Kumar Kaliamurthy, Francis Kwaku Asiam, Jae‐Joon Lee

    Perovskite solar cells (PSCs) combine high power conversion efficiency (PCE) with low fabrication cost, yet their instability under ambient conditions remains a major barrier to commercialization. The protic nature of conventional A‐site cations renders perovskite films vulnerable to moisture‐induced degradation. Here, we demonstrate a mixed‐dimensional (3D/1D) compositional engineering strategy using an aprotic additive, trimethylsulfonium bromide (TMSBr), to enhance both the moisture stability and photovoltaic performance of PSCs. Incorporation of TMSBr into a ternary‐cation perovskite precursor promotes the in situ formation of one‐dimensional TMSPbI 3 during preannealing, which organizes preferentially along the grain boundaries to form a 3D/1D heterostructure. The hydrophobic 1D TMSPbI 3 effectively suppresses water penetration owing to the weak interaction between TMS + and H 2 O molecules, resulting in improved film crystallinity and suppressed intergranular degradation. Devices based on this architecture achieve a high PCE of 21.65% and retain over 84% of their initial efficiency after 40 days of ambient exposure. These findings highlight aprotic sulfonium additives as a promising route toward intrinsically moisture‐stable and durable perovskite photovoltaics.


  • Carboxyl‐Functionalized Sulfonium Additive for Improved Crystallization and Defect Passivation in Ternary Cation Perovskite Solar Cells

    by Appiagyei Ewusi Mensah, Sanjay Sandhu, Mahbubur Rahman, Farihatun Jannat Lima, Francis Kwaku Asiam, Saif Ahmed, Ashok Kumar Kaliamurthy, Muhammad Zain Qamar, Jongdeok Park, Jae‐Joon Lee

    This study explores the use of 2‐(carboxyethyl) (dimethyl)sulfonium bromide (CDMSBr), a carboxyl‐functionalized derivative of trimethylsulfonium (TMS+), as an additive in ternary cation, (Cs0.05FA0.90MA0.05Pb(I0.95Br0.05)3 [CsFAMA]), perovskite solar cells (PSCs) to enhance both stability and photovoltaic performance. In solution, it exhibits a zwitterionic form that controls nucleation and growth of perovskite crystals. It further protonates into CDMS+ during crystallization to facilitate the formation of larger and more uniform grains with better crystallinity. Optimized CsFAMA‐based device achieves power conversion efficiency (PCE) of 21.02% (enhancement of 6.54%) at 1‐sun condition and 38.79% (enhancement of 9.21%) under low‐intensity indoor lighting (1000‐lx, LED 5000 K). The dual role of the additive in defect passivation and grain size enhancement contributes to reduced trap density, promoting increased stability of the PSCs. Devices with CDMSBr maintain 88.53% of their initial PCE after 960 h in ambient conditions. These findings highlight the potential of carboxyl‐functionalized sulfonium additives, like CDMSBr, to enhance perovskite morphology and stability, advancing the performance and operational durability of PSCs.


  • Effective Defect Passivation with an Amino‐Pyrazine Compound for Performance Improvement in Perovskite Solar Cells

    by Appiagyei Ewusi Mensah, Saif Ahmed, Farihatun Jannat Lima, Mahbubur Rahman, Francis Kwaku Asiam, Sanjay Sandhu, Ashok Kumar Kaliamurthy, Jae‐Joon Lee

    Aminopyrazine (APz), a bifunctional additive with nitrogen‐rich content and aromatic character, is investigated for its effectiveness in enhancing the stability and performance of perovskite solar cells (PSCs). When incorporated into the perovskite precursor solution, APz provides dual benefits: it strengthens the perovskite framework through hydrogen‐bonding with halides and Lewis base coordination with under‐coordinated lead to reduce defects at the surface and grain boundaries. The high nitrogen content and aromatic nature of APz further contribute to improved structural stability and moisture resistance in the perovskite films, enhancing charge transport. Optimized PSCs with APz achieve a power conversion efficiency (PCE) of 21.31% and retain over 94% of their initial PCE after 20 days of ambient storage. These findings highlight APz's potential as an additive, demonstrating that nitrogen‐rich, aromatic additives can significantly improve PSC stability and efficiency, advancing their practical application.


  • PEDOT-based counter electrodes for dye-sensitized solar cells: rigid, flexible and indoor light applications

    by Cheng Chen, Francis Kwaku Asiam, Ashok Kumar Kaliamurthy, Mahbubur Rahman, Muhammad Sadiq, Jae-Joon Lee

    Dye-sensitized solar cells (DSSCs) are promising technology owing to their unique properties such as high transparency, good color tunability, and easy large-area fabrication, which make them attractive candidates for emerging photovoltaic applications. However, conventional DSSCs require high-temperature processing for working and counter electrodes (WEs and CEs, respectively), limiting their diverse applications. Low temperature processing for highly catalytic CEs, particularly using poly(3,4-ethylenedioxythiophene) (PEDOT) as a conducting and catalytic replacement for platinum, shows potential for increased efficiency under various light conditions. Despite the high catalytic activity of PEDOT, its limited solubility and processing technologies (e.g., electrochemical deposition and spin-coating) have necessitated the interest in composites of PEDOT either with poly(styrene sulfonate), metal compounds, or in combination with carbon materials, aiming to overcome these limitations. With the combined properties of high conductivity, catalytic activity, porosity, and low temperature processability, these CEs based on PEDOT have higher scientific and industrial prospects. Moreover, the highly transparent PEDOT-based CEs can also be used for bifacial application in DSSCs. To continuously draw interest to further research on these materials, this review provided an overview of PEDOT-based CEs for rigid, flexible, and indoor applications of DSSCs. Additionally, we discuss the changes in electronic, chemical, and stability properties associated with the formation of each type of composite material. The challenges and prospects of PEDOT-based materials are further highlighted, which pave the way for performance improvements in the future, as well as identifying other potential applications in the semiconductor industry.


  • Iron-nickel-cobalt selenide nanoparticles as an efficient and transparent counter electrode for dye-sensitized solar cells

    by Cheng Chen, Francis Kwaku Asiam, Ashok Kumar Kaliamurthy, Palinci Nagarajan Manikandan, Mahbubur Rahman, Junyeong Ryu, Hyeong Cheol Kang, Kicheon Yoo, Jae-Joon Lee


  • Spiro[fluorene-9,9′-xanthene]-based hole shuttle materials for effective defect passivation in perovskite solar cells

    by Bommaramoni Yadagiri, Sanjay Sandhu, Ashok Kumar Kaliamurthy, Francis Kwaku Asiam, Jongdeok Park, Appiagyei Ewusi Mensah, Jae-Joon Lee

    The molecular engineering of the interface modulator between the perovskite and hole transporting material (HTM) is crucial to achieving satisfactory performance and stability of perovskite solar cells (PSCs). Here, cruciform-shaped dual functional organic materials, denoted as SPX-TPA and SPX-BT, are employed for surface passivation and hole transporting interfacial layers (HTILs) in MAPbI3-based PSCs. The rigid three-dimensional conjugated spiro(fluorene-9,9′-xanthene) (SPX) core is identical to spiro-fluorene (existing in spiro-OMeTAD) except differentiated by one oxygen atom. This core unit can effectively adjust the HOMO level and inhibits intramolecular π–π stacking to extract holes from the adjacent perovskite layer. The small energy gap between SPX-TPA (50 meV) and the perovskite can effectively minimize voltage losses and promotes the hole shuttling process. The hydroxyl (–OH) group in the SPX unit forms hydrogen bonds with undercoordinated iodide (I−) and methyl ammonium (MA+) ions, suppressing the related defects. Lewis bases (O, N and S) in TPA and BT units can promote the passivation of undercoordinated Pb2+ and MA+ (Lewis acid) via Lewis acid–base interactions (Pb–S/O/N). As a result, the PSCs with SPX-TPA and SPX-BT exhibit significantly improved PCEs of 20.03% and 18.51%, respectively, while the PCE of the control device is 17.77%. The enhanced PV performance of SPX-TPA treated PSCs is ascribed to the well-aligned energy levels, superior hole mobility, and favorable film morphology.


  • Cosensitization of metal-based dyes for high-performance dye-sensitized photovoltaics under ambient lighting conditions

    by Muhammad Ahsan Saeed, Hyeong Cheol Kang, Kicheon Yoo, Francis Kwaku Asiam, Jae-Joon Lee, Jae Won Shim


  • Open Access

    Preliminary Investigation on Vacancy Filling by Small Molecules on the Performance of Dye-Sensitized Solar Cells: The Case of a Type-II Absorber

    by Francis Kwaku Asiam, Nguyen Huy Hao, Ashok Kumar Kaliamurthy, Hyeong Cheol Kang, Kicheon Yoo, Jae-Joon Lee

    The steric shielding offered by sensitizers on semiconducting surfaces as a result of branching in the dyes used offers the less utilization of semiconducting substrate sites during device fabrication in dye-sensitized solar cells (DSSCs). This work proposes a strategy to increase the coverage through the utilization of small molecules which have the ability to penetrate into the sites. The small molecules play the dual role of vacancy filling and sensitization, which can be viewed as an alternative to co-sensitization also. Hence, we show for the first time ever that the co-adsorption of catechol with Z907 as a sensitizer enhances the electron density in the photo-anode by adsorbing on the vacant sites. Catechol was subsequently adsorbed on TiO2 after Z907 as it has a stronger interaction with TiO2 owing to its favorable thermodynamics. The reduced number of vacant sites, suppressed charge recombination, and enhanced spectral response are responsible for the improvement in the PCEs. Quantitatively, both organic and aqueous electrolytes were used and the co-sensitized DSSCs had PCE enhancements of 7.2 and 60%, respectively, compared to the control devices.