Guifang Qiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Guifang Qiao has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Guangming Song
Southeast University
4 shared publications - Zhong Wei
School of Automation, Nanjing University of Information Science and Technology, Nanjing 210044, China
4 shared publications - Xiulan Wen
Automation Department, Nanjing Institute of Technology, Nanjing 211167, China
3 shared publications - Aiguo Song
Southeast University
2 shared publications - Huiyu Sun
Southeast University, Nanjing, China
2 shared publications Xiulan Wen
School of Automation, Nanjing Institute of Technology, Nanjing, China
2 shared publications
Latest Publications
- 8 July 2022
- Published by Springer Nature
- p. 190-201
Error Sensitivity Based Redundancy Analysis for Kinematic Calibration of Industrial Robot
- 8 July 2022
- Published by Springer Nature
- p. 190-201
Error Sensitivity Based Redundancy Analysis for Kinematic Calibration of Industrial Robot
- Open Access
- 8 July 2021
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-9
Experimental Analysis on the Effectiveness of Kinematic Error Compensation Methods for Serial Industrial Robots
Based on the established serial 6-DOF robot calibration experiment platform, this paper aims to analyze and compare the effects of four error compensation methods, which are pseudotarget iteration-based error compensation method with three different forms and the Newton–Raphson-based error compensation method. Firstly, the pose error model of the serial robot is established based on the M-DH model in this paper. The calibration results show that the accuracy of the Staubli TX60 robot has been greatly improved. The average comprehensive position accuracy is increased by 88.7%, and the average comprehensive attitude accuracy is increased by 56.6%. Secondly, the principles of the four error compensation methods are discussed, and the effectiveness of the four error compensation methods are compared through experiments. The results show that the four error compensation methods can achieve error compensation well. The compensation accuracy is consistent with the identification accuracy of the kinematic model. The pseudotarget iteration with differential form has the best performance by the comprehensive consideration of accuracy and computational efficiency. Error compensation determines whether the accuracy of the identified model can be achieved. This paper presents a systematic experimental validation research on the effectiveness of four error compensation methods, which provides a reliable reference for the kinematic error compensation of industrial robots.
- 8 July 2021
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-9
Open AccessExperimental Analysis on the Effectiveness of Kinematic Error Compensation Methods for Serial Industrial Robots
Based on the established serial 6-DOF robot calibration experiment platform, this paper aims to analyze and compare the effects of four error compensation methods, which are pseudotarget iteration-based error compensation method with three different forms and the Newton–Raphson-based error compensation method. Firstly, the pose error model of the serial robot is established based on the M-DH model in this paper. The calibration results show that the accuracy of the Staubli TX60 robot has been greatly improved. The average comprehensive position accuracy is increased by 88.7%, and the average comprehensive attitude accuracy is increased by 56.6%. Secondly, the principles of the four error compensation methods are discussed, and the effectiveness of the four error compensation methods are compared through experiments. The results show that the four error compensation methods can achieve error compensation well. The compensation accuracy is consistent with the identification accuracy of the kinematic model. The pseudotarget iteration with differential form has the best performance by the comprehensive consideration of accuracy and computational efficiency. Error compensation determines whether the accuracy of the identified model can be achieved. This paper presents a systematic experimental validation research on the effectiveness of four error compensation methods, which provides a reliable reference for the kinematic error compensation of industrial robots.
- Open Access
- 1 January 2020
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 56 (14) , 1-8
A Rapid Coordinate Transformation Method for Serial Robot Calibration System
- 1 January 2020
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 56 (14) , 1-8
Open AccessA Rapid Coordinate Transformation Method for Serial Robot Calibration System
- 16 October 2018
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 45 (5) , 657-668
Turning strategies for the bounding quadruped robot with an active spine
Purpose: This paper aims to study the turning strategies for the bounding quadruped robot with an active spine and explore the significant role of the spine in the turning locomotion. Design/methodology/approach: Firstly, the bounding gait combining the pitch motion of the spine with the leg motion is presented. In this gait, the spine moves in phase with the front legs. All the joints of the legs and spine are controlled by cosine signals to simplify the control, and the initial position and oscillation amplitude of the joints can be tuned. To verify the effectiveness of the proposed gait, the spine joints are set with different initial positions and oscillation amplitudes, and the initial position and oscillation amplitude of the leg joints are tuned to make the virtual model do the best locomotion in terms of the speed and stability in the simulation. The control signals are also used to control a real robot called Transleg. Then, three different turning strategies are proposed, including driving the left and right legs with different strides, swaying the spine in the yaw direction and combining the above two methods. Finally, these strategies are tested on the real robot. Findings: The stable bounding locomotion can be achieved using the proposed gait. With the spine motion, the speed of the bounding locomotion is increased; the turning radius is reduced; and the angular velocity is increased. Originality/value: A simple and flexible planning of the bounding gait and three turning strategies for the bounding quadruped robot are proposed. The effectiveness of the proposed bounding gait, along with the beneficial effect of the spine motion in the yaw direction on the turning locomotion is demonstrated with the computer simulations and robot experiments. This will be instructive for the designing and actuating of the other quadruped robots.
- 16 October 2018
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 45 (5) , 657-668
Turning strategies for the bounding quadruped robot with an active spine
Purpose: This paper aims to study the turning strategies for the bounding quadruped robot with an active spine and explore the significant role of the spine in the turning locomotion. Design/methodology/approach: Firstly, the bounding gait combining the pitch motion of the spine with the leg motion is presented. In this gait, the spine moves in phase with the front legs. All the joints of the legs and spine are controlled by cosine signals to simplify the control, and the initial position and oscillation amplitude of the joints can be tuned. To verify the effectiveness of the proposed gait, the spine joints are set with different initial positions and oscillation amplitudes, and the initial position and oscillation amplitude of the leg joints are tuned to make the virtual model do the best locomotion in terms of the speed and stability in the simulation. The control signals are also used to control a real robot called Transleg. Then, three different turning strategies are proposed, including driving the left and right legs with different strides, swaying the spine in the yaw direction and combining the above two methods. Finally, these strategies are tested on the real robot. Findings: The stable bounding locomotion can be achieved using the proposed gait. With the spine motion, the speed of the bounding locomotion is increased; the turning radius is reduced; and the angular velocity is increased. Originality/value: A simple and flexible planning of the bounding gait and three turning strategies for the bounding quadruped robot are proposed. The effectiveness of the proposed bounding gait, along with the beneficial effect of the spine motion in the yaw direction on the turning locomotion is demonstrated with the computer simulations and robot experiments. This will be instructive for the designing and actuating of the other quadruped robots.
- Open Access
- 14 November 2017
- Published by SAGE Publications in International Journal of Advanced Robotic Systems
- Vol. 14 (6)
Triple-layered central pattern generator-based controller for 3D locomotion control of snake-like robots
Due to the great adaptability, snake-like robots can serve as special intelligent service robots. In this article, a novel triple-layered central pattern generator (CPG)-based controller is proposed to control the 3D locomotion of snake-like robots. The proposed triple-layered CPG includes a rhythm generation layer, a pattern generation layer, and a motoneuron layer. The nonlinear Kuramoto oscillator and the rhythmic dynamic movement primitive are, respectively, used to model the interneurons and motoneurons. The triple-layered CPG can flexibly generate the multidimensional phase-coordinated control signals of snake-like robots. Firstly, the architecture of the proposed triple-layered CPG is validated, and the impacts of control parameters on the outputs are numerically analyzed. Secondly, the smooth locomotion transition process of the triple-layered CPG is discussed. Finally, the performances of the proposed triple-layered CPG for controlling snake-like robots have been evaluated through the co-simulation of Simulink and MSC Adams [version 2012]. The results illustrate that the proposed triple-layered CPG can easily and flexibly generate continuous and smooth for controlling 3D locomotion of snake-like robots. It can improve the mobility and adaptability of snake-like robots.
- 14 November 2017
- Published by SAGE Publications in International Journal of Advanced Robotic Systems
- Vol. 14 (6)
Open AccessTriple-layered central pattern generator-based controller for 3D locomotion control of snake-like robots
Due to the great adaptability, snake-like robots can serve as special intelligent service robots. In this article, a novel triple-layered central pattern generator (CPG)-based controller is proposed to control the 3D locomotion of snake-like robots. The proposed triple-layered CPG includes a rhythm generation layer, a pattern generation layer, and a motoneuron layer. The nonlinear Kuramoto oscillator and the rhythmic dynamic movement primitive are, respectively, used to model the interneurons and motoneurons. The triple-layered CPG can flexibly generate the multidimensional phase-coordinated control signals of snake-like robots. Firstly, the architecture of the proposed triple-layered CPG is validated, and the impacts of control parameters on the outputs are numerically analyzed. Secondly, the smooth locomotion transition process of the triple-layered CPG is discussed. Finally, the performances of the proposed triple-layered CPG for controlling snake-like robots have been evaluated through the co-simulation of Simulink and MSC Adams [version 2012]. The results illustrate that the proposed triple-layered CPG can easily and flexibly generate continuous and smooth for controlling 3D locomotion of snake-like robots. It can improve the mobility and adaptability of snake-like robots.
- 22 June 2017
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 9 (5) , 051001
Design and Implementation of a Leg–Wheel Robot: Transleg
In this paper, the design and implementation of a novel leg–wheel robot called Transleg are presented. Transleg adopts the wire as the transmission mechanism to simplify the structure and reduce the weight. To the best knowledge of the authors, the wire-driven method has never been used in the leg–wheel robots, so it makes Transleg distinguished from the existing leg–wheel robots. Transleg possesses four transformable leg–wheel mechanisms, each of which has two active degrees-of-freedom (DOFs) in the legged mode and one in the wheeled mode. Two actuators driving each leg–wheel mechanism are mounted on the body, so the weight of the leg–wheel mechanism is reduced as far as possible, which contributes to improving the stability of the legged locomotion. Inspired by the quadruped mammals, a compliant spine mechanism is designed for Transleg. The spine mechanism is also actuated by two actuators to bend in the yaw and pitch directions. It will be beneficial to the turning motion in the legged and wheeled modes and the bounding gait in the legged mode. The design and kinematic analyses of the leg–wheel and spine mechanisms are presented in detail. To verify the feasibility of Transleg, a prototype is implemented. The experiments on the motions in the legged and wheeled modes, the switch between the two modes, and the spine motions are conducted. The experimental results demonstrate the validity of Transleg.
- 22 June 2017
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 9 (5) , 051001
Design and Implementation of a Leg–Wheel Robot: Transleg
In this paper, the design and implementation of a novel leg–wheel robot called Transleg are presented. Transleg adopts the wire as the transmission mechanism to simplify the structure and reduce the weight. To the best knowledge of the authors, the wire-driven method has never been used in the leg–wheel robots, so it makes Transleg distinguished from the existing leg–wheel robots. Transleg possesses four transformable leg–wheel mechanisms, each of which has two active degrees-of-freedom (DOFs) in the legged mode and one in the wheeled mode. Two actuators driving each leg–wheel mechanism are mounted on the body, so the weight of the leg–wheel mechanism is reduced as far as possible, which contributes to improving the stability of the legged locomotion. Inspired by the quadruped mammals, a compliant spine mechanism is designed for Transleg. The spine mechanism is also actuated by two actuators to bend in the yaw and pitch directions. It will be beneficial to the turning motion in the legged and wheeled modes and the bounding gait in the legged mode. The design and kinematic analyses of the leg–wheel and spine mechanisms are presented in detail. To verify the feasibility of Transleg, a prototype is implemented. The experiments on the motions in the legged and wheeled modes, the switch between the two modes, and the spine motions are conducted. The experimental results demonstrate the validity of Transleg.
- Open Access
- 19 May 2017
- Published by SAGE Publications in International Journal of Advanced Robotic Systems
- Vol. 14 (3)
Sigmoid transition approach of the central pattern generator-based controller for the snake-like robot
Snake-like robots can perform various types of locomotion in the complex environments. In this article, a novel two-layered central pattern generator-based controller is proposed for controlling snake-like robots. To adapt to rough terrain, snake-like robots can dynamically adjust their locomotion through modulating the control parameters of the central pattern generator-based controller based on the sensory feedback. When the parameters are modulated through the step function, the outputs of the central pattern generator-based controller may be unsmooth or discontinuous during the transition process. This will result in stiff and flexible impulses on the motors and gearboxes. In this article, the curvilinear continuity is used to evaluate the continuity degree of the outputs of the central pattern generator-based controller. In order to avoid the damage to the joint motors, two sigmoid transition approaches are proposed. First, a sigmoid parametric modulation method for the central pattern generator-based controller is proposed to eliminate the abrupt changes in the control signals of the joint motors. Second, a sigmoid start-up method is presented to improve the motion efficiency of the snake-like robot. The simulation results of the snake-like robot show that the outputs of the central pattern generator-based controller transit smoothly with the proposed sigmoid parametric modulation method. The snake-like robot can perform a soft start when the sigmoid start-up method is applied. The results demonstrate that the central pattern generator-based controller and the two proposed sigmoid transition approaches are effective.
- 19 May 2017
- Published by SAGE Publications in International Journal of Advanced Robotic Systems
- Vol. 14 (3)
Open AccessSigmoid transition approach of the central pattern generator-based controller for the snake-like robot
Snake-like robots can perform various types of locomotion in the complex environments. In this article, a novel two-layered central pattern generator-based controller is proposed for controlling snake-like robots. To adapt to rough terrain, snake-like robots can dynamically adjust their locomotion through modulating the control parameters of the central pattern generator-based controller based on the sensory feedback. When the parameters are modulated through the step function, the outputs of the central pattern generator-based controller may be unsmooth or discontinuous during the transition process. This will result in stiff and flexible impulses on the motors and gearboxes. In this article, the curvilinear continuity is used to evaluate the continuity degree of the outputs of the central pattern generator-based controller. In order to avoid the damage to the joint motors, two sigmoid transition approaches are proposed. First, a sigmoid parametric modulation method for the central pattern generator-based controller is proposed to eliminate the abrupt changes in the control signals of the joint motors. Second, a sigmoid start-up method is presented to improve the motion efficiency of the snake-like robot. The simulation results of the snake-like robot show that the outputs of the central pattern generator-based controller transit smoothly with the proposed sigmoid parametric modulation method. The snake-like robot can perform a soft start when the sigmoid start-up method is applied. The results demonstrate that the central pattern generator-based controller and the two proposed sigmoid transition approaches are effective.
- 23 October 2015
- Published by Elsevier in Chinese Journal of Mechanical Engineering
- Vol. 29 (1) , 212-218
Measurement uncertainty evaluation of conicity error inspected on CMM
- 23 October 2015
- Published by Elsevier in Chinese Journal of Mechanical Engineering
- Vol. 29 (1) , 212-218
Measurement uncertainty evaluation of conicity error inspected on CMM