PMPranab Kumar Mohapatra

Pranab Kumar Mohapatra

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pranab Kumar Mohapatra has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Local scour around a bridge pier in a right-angled channel confluence: an experimental study with mobile bed

    by Wahidullah Hakim Safi, Pranab K. Mohapatra

    1. Right-angled channel confluences (RACC) are commonly seen in ranges of hydraulic systems, including urban drainage networks, irrigation drainage networks, storm water treatment facilities, fish ...

  • Open Access

    A novel approach for mapping and prioritizing optimal stormwater harvesting sites in urban and peri-urban environments

    by Indra Mani Tripathi, Sumit Ghorai, Pranab Kumar Mohapatra, Mitthan Lal Kansal

    Rapid urbanization and climate variability often intensify water scarcity and urban flooding in developing cities, necessitating sustainable alternatives to conventional water supply systems. Stormwater harvesting (SWH) offers a promising solution by utilizing locally available runoff for non-potable demands while mitigating flood risks. This study proposes a novel, GIS-integrated hydrological modeling and Analytic Hierarchy Process (AHP)–based framework to identify and prioritize suitable Stormwater Drainage Outlets (SDOs) for urban stormwater harvesting. The methodology takes into account runoff–demand ratio, weighted average distance (WAD), slope, land use-land cover (LULC), and groundwater recharge potential (GRP) to evaluate hotspot suitability across two spatial scales defined by radius of influence (ROI) of 1 km and 0.5 km. The framework was applied to Bhopal, India, a rapidly growing city facing increasing water stress. Results reveal significant spatial variability in hydrological conditions and accessibility, with runoff–demand ratio emerging as the most influential criterion. Hotspot rankings demonstrate scale dependency, where larger ROIs favor hydrological availability, while smaller ROIs emphasize accessibility and localized conditions. The proposed approach enables systematic screening and ranking of SDOs and provides a scalable decision-support tool for decentralized stormwater reuse, contributing to sustainable urban water management and enhanced resilience to water scarcity.


  • Open Access

    Sensitivity Analysis of Bioretention Cells for Stormwater Management: A Study in Secondary Cities of India

    by Indra Mani Tripathi, Pranab Kumar Mohapatra

    The present study conducts a comprehensive sensitivity analysis of bioretention cells, a green stormwater management infrastructure, in the context of urban stormwater systems in secondary cities of India (Bhopal and Kozhikode). The research aims to enhance our understanding of the performance and effectiveness of bioretention cells in mitigating the impacts of urbanization on stormwater runoff. Utilizing the Storm Water Management Model (SWMM), the study employs a systematic approach to assess the sensitivity of bioretention cells to various design and environmental parameters. The initial screening of diverse design parameters is performed using the one-factor-at-a-time (OAT) sensitivity analysis method. Subsequently, pivotal parameters, namely, conductivity, berm height, vegetation volume, suction head, porosity, wilting point, and soil thickness, are identified for further sensitivity analysis. Around 500 randomly and uniformly distributed samples for each sensitive design parameter are simulated using a Python wrapper for the Storm Water Management Model (PySWMM). These simulations are conducted under varying design storm scenarios. This research contributes valuable insights into the optimal design and configuration of bioretention cells tailored to the specific challenges posed by stormwater in secondary cities of India. By systematically analyzing the sensitivity of these green infrastructure elements, the study aims to inform urban planners, engineers, and policymakers about effective stormwater management strategies.

  • Open Access

    Effect of bedload shape on the signal characteristics of a hybrid impact plate 

    by Bidhan Kumar Sahu, Pranab Kumar Mohapatra

    Understanding bedload dynamics is critical for insights into erosion, sedimentation, and channel evolution of river systems. Designing hydraulic structures and validating existing sediment transport models need accurate bedload data. Bedload measurement is done using direct methods involving physical samplers or indirect devices with various acoustic sensors. One widely used indirect method is the impact plate system, which houses an acoustic sensor under it to detect bedload particles. Impact plate systems have been tested under varying velocity, bed roughness and bedload grain sizes. However, the influence of bedload particle shape on the signal characteristics in impact plate systems has yet to be investigated in detail. In the present study, an impact plate system with a hybrid sensor (accelerometer and geophone) attached to the plate's underside is used to understand the role of the shape of the bedload in an experimental flume. Five different particle sizes (4 to 40 mm) are grouped into three classes based on their sphericity index (0.45-0.6, 0.6-0.75, and 0.75-0.9), creating a total of fifteen classes. Ten bedload particles from each class are manually released over the impact plate for 20 runs, and the signals are recorded. It is found that the bedload shape significantly affects the signal characteristics, and with increasing sphericity, the mean maximum amplitude of the signal increases while the centroid frequency decreases. A calibration equation is thus developed between the signal parameters and the sphericity of the bedload grains.

  • Open Access

    How far have roadside curb inlets evolved towards sustainable urban drainage?

    by Aamer Majid Bhat, Indra Mani Tripathi, Pranab Kumar Mohapatra


  • Open Access

    Hydraulic modelling reveals untreated sewage, not pharmaceutical waste, drives antimicrobial resistance in a small river running through a big city

    by Vikas Sonkar, Arun Kashyap, Rebeca Pallarés-Vega, Sai Sugitha Sasidharan, Ankit Modi, Cansu Uluseker, Sangeetha Chandrakalabai Jambu, Pranab Kumar Mohapatra, Joshua Larsen, David W Graham, et al.

    Antimicrobial resistance (AMR) is a silent pandemic, which is transmitted and spread through the environment. Few of many studies on waterborne AMR spread have characterised the prevalence, sources, and transport of AMR in adequate detail to inform mathematical modelling and exposure risk assessments. Here, we quantified taxonomic and resistance genes (ARGs), sensitive and resistant bacteria (ARBs), and environmental conditions in water and sediment samples at ten locations along the Musi River through Hyderabad, a city renowned for antimicrobial manufacturing, to develop a hydraulic model for AMR spread in the catchment. In the dry season, absolute water column ARG and ARB abundances increased rapidly upon entering the city, then declined downstream. In the wet season, the increase and decline of AMR levels was more gradual. Clustering and ordination of ARGs separated the river into three stretches: upstream, city, and downstream. Most ARGs and water quality indicators differed significantly between stretches and seasons (pHighlights Within the city, the concentration of ARGs and ARBs increases in the dry season Clustering and ordination of ARGs separates upstream, city and downstream stretches PERMANOVA shows stretches and seasons are significantly different LDA can discriminate stretches and seasons based on water quality parameters Point source load calculations indicate 60-80% of river water is untreated wastewater


  • Measuring Bedload by a Hybrid Impact Plate System

    by Bidhan Kumar Sahu, Pranab Kumar Mohapatra

    Accurate measurement of bedload is challenging, considering its spatial and temporal variability. Various indirect acoustic techniques are often used for estimating the bedload rate and tot...

  • Open Access

    A Smoothed Particle Hydrodynamics Approach for One-Dimensional Dam Break Flow Simulation with Boussinesq Equations

    by Manoj Kumar Diwakar, Pranab Kumar Mohapatra

    The Smoothed Particle Hydrodynamics (SPH) method has been applied to solve the Boussinesq equations in order to simulate hypothetical one-dimensional dam break flows (DBFs) across varying depth ratios. Initial simulations reveal that the influence of Boussinesq terms remains minimal during the early stages of DBF when the depth ratio is less than 0.4. However, these terms become increasingly significant at later stages of the flow. In comparison to simulations based on the Saint-Venant equations, the Boussinesq-SPH model underestimates flow depths in regions of constant elevation while overestimating the propagation speed of the positive surge wave, with this overestimation becoming more pronounced as the depth ratio increases. Notably, the first and third Boussinesq terms exert the greatest influence on the simulation results. The findings also indicate the presence of non-hydrostatic pressure distributions within the DBF, which contribute to the accelerated movement of the positive surge. This study offers valuable insights into the modelling of flows that exhibit non-hydrostatic behaviour, and the results may be instrumental in improving the analysis of similar flow phenomena, especially those involving complex pressure distributions and wave propagation dynamics.

  • 3D Numerical Simulations of the Bed Evolution at an Open-Channel Junction in Flood Conditions

    by Abhishek K. Pandey, Pranab K. Mohapatra

    Open-channel junctions pose a risk associated with flooding and erosion. However, despite the numerous studies concerning the channel junctions, the bed and flow field evolutions at junctio...