Yevhen Pavlov
Yevhen Pavlov has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Anatolii Novak
Technical University Metinvest Polytechnic
1 shared publication - Andrii O. Lunov
Державний університет «Житомирська політехніка
1 shared publication - Andrii Surzhenko
Donetsk National Technical University
1 shared publication - Andrii Toporov
Donetsk National Technical University
1 shared publication - Eduard Fesenko
LLC Technical University Metinvest Polytechnic
1 shared publication - Eduard Fesenko
Technical University “Metinvest Polytechnic” LLC
1 shared publication
Latest Publications
- Open Access
- 3 July 2023
- Published by Zhytomyr Polytechnic State University in Технічна інженерія
- No. 1(91),p. 298-307
Дослідження просторової мінливості якісних показників при видобуванні кварц-польовошпатової сировини в умовах родовища «Гірне»
Робота присвячена питанням геометризації родовищ кварц-польовошпатової сировини з використанням сучасних методів та технологій. У результаті виконаних досліджень на основі застосування сучасних геоінформаційних систем ГІС та інформаційно-комп’ютерних технологій встановлено кондиційні ділянки та ділянки з підвищеним вмістом шкідливих елементів та мінералів.. Удосконалено методики геометризації родовищ кварц-польовошпатової сировини. На основі теоретичних і експериментальних досліджень доведено можливість одержання різнопланових комплексних планів кількісного вираження основних показників покладу і шляхом гірничо-геометричного аналізу цих основних характеристик із застосуванням сучасних комп’ютерно-інформаційних технологій та ГІС створено відповідні моделі. Отримані результати можуть бути використані для поділу кар’єрного поля на технологічні зони залежно від вмісту основних показників та надання рекомендацій щодо селективного відпрацювання, що дозволить оптимізувати видобувні роботи та зменшити втрати корисної копалини.
- 3 July 2023
- Published by Zhytomyr Polytechnic State University in Технічна інженерія
- No. 1(91),p. 298-307
Open AccessДослідження просторової мінливості якісних показників при видобуванні кварц-польовошпатової сировини в умовах родовища «Гірне»
Робота присвячена питанням геометризації родовищ кварц-польовошпатової сировини з використанням сучасних методів та технологій. У результаті виконаних досліджень на основі застосування сучасних геоінформаційних систем ГІС та інформаційно-комп’ютерних технологій встановлено кондиційні ділянки та ділянки з підвищеним вмістом шкідливих елементів та мінералів.. Удосконалено методики геометризації родовищ кварц-польовошпатової сировини. На основі теоретичних і експериментальних досліджень доведено можливість одержання різнопланових комплексних планів кількісного вираження основних показників покладу і шляхом гірничо-геометричного аналізу цих основних характеристик із застосуванням сучасних комп’ютерно-інформаційних технологій та ГІС створено відповідні моделі. Отримані результати можуть бути використані для поділу кар’єрного поля на технологічні зони залежно від вмісту основних показників та надання рекомендацій щодо селективного відпрацювання, що дозволить оптимізувати видобувні роботи та зменшити втрати корисної копалини.
- Open Access
- 8 October 2021
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (1(61)) , 41-45
Improvement of technological processes for mining solid mineral resources
The object of research is the technological processes of the development of deposits and the extraction of solid minerals by underground and open-pit methods. The improvement of technological processes is achieved through the use of existing original technical solutions, which are currently advisable to use in practice. The work is aimed at increasing the efficiency of explosive energy use, improving the technological processes of mining operations in coal mines and open pits of mining enterprises. In the course of the study, an analysis of technical literature on mining topics was used, a search for copyright certificates for inventions and patents on the same topic was carried out. There was a search for innovative solutions that are expedient to apply at the present time. In the course of the analysis, the work shows ideas, methods of coal mining, systems for the development of coal seams, methods of destruction of rocks, microbiological reclamation and other new technologies and devices. The most promising technologies have been proposed for in-depth study, implementation and use in appropriate mining and geological conditions. The proposed technologies, for various reasons, have not yet found wide practical application at mining enterprises. Due to the application of the proposed technical solutions and technologies in practice in the conditions of existing coal mines and open pits, significant economic, environmental and financial effects can be obtained. This study was carried out in order to bring to a wide circle of specialists technical solutions that can contribute to a significant improvement in the technology of mining solid minerals, both in underground and open-pit mining all over the world.
- 8 October 2021
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (1(61)) , 41-45
Open AccessImprovement of technological processes for mining solid mineral resources
The object of research is the technological processes of the development of deposits and the extraction of solid minerals by underground and open-pit methods. The improvement of technological processes is achieved through the use of existing original technical solutions, which are currently advisable to use in practice. The work is aimed at increasing the efficiency of explosive energy use, improving the technological processes of mining operations in coal mines and open pits of mining enterprises. In the course of the study, an analysis of technical literature on mining topics was used, a search for copyright certificates for inventions and patents on the same topic was carried out. There was a search for innovative solutions that are expedient to apply at the present time. In the course of the analysis, the work shows ideas, methods of coal mining, systems for the development of coal seams, methods of destruction of rocks, microbiological reclamation and other new technologies and devices. The most promising technologies have been proposed for in-depth study, implementation and use in appropriate mining and geological conditions. The proposed technologies, for various reasons, have not yet found wide practical application at mining enterprises. Due to the application of the proposed technical solutions and technologies in practice in the conditions of existing coal mines and open pits, significant economic, environmental and financial effects can be obtained. This study was carried out in order to bring to a wide circle of specialists technical solutions that can contribute to a significant improvement in the technology of mining solid minerals, both in underground and open-pit mining all over the world.
- Open Access
- 30 June 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (7 (111)) , 74-83
Determining the efficiency and parameters of rubble strip reinforcement
The necessity of development and improvement of methods and means for the protection of preparatory roadways, in particular, protective structures, was proved on the basis of ordinary rock with binding surfaces. Analysis of the results of the study on the use of protective structures of ordinary rock and bounding surfaces was performed. It has shown the feasibility of reinforcing rock structures to ensure operational conditions for the protected roadways. Such structures include rubble strips reinforced with partitions made of metal mesh. To determine their efficiency and reinforcement parameters, studies were performed using provisions of structural mechanics, soil mechanics, and bulk media, as well as physical modeling using natural materials. According to the results obtained in the performed studies, the efficiency of reinforcement of rubble strips with a metal grid was proved and a procedure for calculation of reinforcement parameters that need to be considered in designing the above structures was developed. Such parameters include width and height of the strip, class of reinforcement, its diameter and tensile strength, size of the grid cells, angle of internal friction of rocks, and diameter of maximum rock pieces in the strip. It was established that reinforcement of the rubble strip by partitions made of metal meshes can reduce the width of the strip and volume of the rock fill by 1.33…2.66 times without losing the structure rigidity. To do this, the condition of reinforcement strength in grids must be met. It consists of comparing its tensile strength with maximum stresses in the partition. These stresses are determined by the magnitude of the load on the rubble strip from the roof rocks, the diameter of the reinforcement, and the maximum rock pieces, as well as relative extensional strain in reinforcement.
- 30 June 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (7 (111)) , 74-83
Open AccessDetermining the efficiency and parameters of rubble strip reinforcement
The necessity of development and improvement of methods and means for the protection of preparatory roadways, in particular, protective structures, was proved on the basis of ordinary rock with binding surfaces. Analysis of the results of the study on the use of protective structures of ordinary rock and bounding surfaces was performed. It has shown the feasibility of reinforcing rock structures to ensure operational conditions for the protected roadways. Such structures include rubble strips reinforced with partitions made of metal mesh. To determine their efficiency and reinforcement parameters, studies were performed using provisions of structural mechanics, soil mechanics, and bulk media, as well as physical modeling using natural materials. According to the results obtained in the performed studies, the efficiency of reinforcement of rubble strips with a metal grid was proved and a procedure for calculation of reinforcement parameters that need to be considered in designing the above structures was developed. Such parameters include width and height of the strip, class of reinforcement, its diameter and tensile strength, size of the grid cells, angle of internal friction of rocks, and diameter of maximum rock pieces in the strip. It was established that reinforcement of the rubble strip by partitions made of metal meshes can reduce the width of the strip and volume of the rock fill by 1.33…2.66 times without losing the structure rigidity. To do this, the condition of reinforcement strength in grids must be met. It consists of comparing its tensile strength with maximum stresses in the partition. These stresses are determined by the magnitude of the load on the rubble strip from the roof rocks, the diameter of the reinforcement, and the maximum rock pieces, as well as relative extensional strain in reinforcement.