VPVolodymyr Piddubnyi

Volodymyr Piddubnyi

*This is an algorithmically generated author record based on publicly available information.

Volodymyr Piddubnyi has a total of 84 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Regularities of the Structure Formation Process in Complex Food Systems During Mixing

    by Igor Stadnyk, Volodymyr Piddubnyi, Liudmyla Kiurcheva, Vitaliy Pidlisnyj, Zbigniew Kowalczyk, Maciej Kuboń, Taras Hutsol

    An integrated information–energy framework is proposed for assessing boundary kinematic interactions and viscoelastic structure formation during wheat dough mixing in a novel polyhedral chamber. The approach couples spatial boundary velocity fields with non-equilibrium viscous energy dissipation evaluated via thixotropic hysteresis loops. Experimental viscometric measurements conducted at T = 28 °C demonstrated that progressive structural homogenization reduces specific power input from 5143.7 → 4510.2 W/m3, representing a 12.3% energy reduction under investigated operating regimes. Evaluation of thixotropic energy dissipation established an optimal gluten network structuralization time at τ = 3.6 min, which shortens the mixing cycle by 14% compared to conventional processing without inducing overmixing degradation. A generalized Maxwell constitutive model with a distributed relaxation spectrum was calibrated against experimental flow curves, demonstrating high predictive accuracy (R2 > 0.92, agreement exceeding 90%). The proposed framework establishes a quantitative bridge between boundary shear kinematics, macromolecular gluten preservation, and processing energy efficiency, providing a physically sound foundation for designing high-performance mixing equipment.

  • Open Access

    УДОСКОНАЛЕННЯ ТЕХНОЛОГІЇ ПШЕНИЧНОГО ХЛІБА ШЛЯХОМ ВИКОРИСТАННЯ ФІТОЗБАГАЧУВАЧІВ У ВИГЛЯДІ ОВОЧЕВИХ МАС

    by І. М. Белова, Л. М. Кюрчева, В. М. Гіджеліцький, М. В. Кирилів

    В роботі проведено обгрунтування технологічного процесу виробництва хлібобулочних виробів із пшеничного борошна вищого ґатунку з додаванням подрібнених мас моркови та буряка. Розглянуто фізико-хімічні методи оцінки якості борошна та клейковини; мікроскопічне дослідження життєздатності дріжджових клітин; органолептична оцінка готової продукції. Встановлено, що підіймальна сила дріжджів покращується на 28–30 % завдяки дії мінеральних речовин (K, Ca, Na) та вітамінів, що містяться в овочах. Розроблено рецептуру збагаченого хліба, яка дозволяє повністю виключити використання маргарину та вчетверо знизити вміст доданого цукру. Готовий продукт характеризується високою пористістю (72 %), підвищеною мікробіологічною стійкістю до «картопляної хвороби» та високою оцінкою споживчої привабливості. Обґрунтовано механізм впливу нутрієнтів овочевих мас на метаболізм дріжджів та структурно-механічні властивості пшеничного тіста при замішуванні без додавання води

  • Open Access

    ІНТЕНСИФІКАЦІЯ ЕКСТРАГУВАННЯ ЧОРНОБРИВЦІВ У РОТОРНО-ПУЛЬСАЦІЙНОМУ АПАРАТІ

    by І. М. Белова, В. М. Гіджеліцький, І. Я. Стадник

    У статті досліджено процес інтенсифікації екстрагування біоактивних сполук із суцвіть чорнобривців (Tagetes patula) у роторно-пульсаційному апараті (РПА) циліндричного типу з гвинтовим ротором. Науково обґрунтовано застосування принципу дискретного введення енергії для підвищення швидкості масообміну. На основі аналізу рівняння руху дисперсної частки визначено роль сил інерції приєднаної маси та гідродинамічного опору в руйнуванні прикордонного дифузійного шару. Установлено, що конструктивні особливості апарата забезпечують високу відносну швидкість фаз, що дає змогу скоротити тривалість екстракції в кілька разів порівняно з традиційними методами, забезпечуючи високий вихід цільових компонентів при оптимальних енерговитратах.

  • PROCESSES OF BREAD BAKING IN OVEN CHAMBERS: CONTINUA-DISCRETE MODELING

    by V. Piddubny, I. Stadnyk, V. Fedoriv, S. Kraievska, А. Sabadosh, V. Kovbasa

    The paper substantiates the relevance of creating a universal mathematical model capable of describing a set of physical and technological processes occurring in multiphase and structurally inhomogeneous media under the action of heat flows. It is shown that the simultaneous presence of continuous phases (solids, liquids, gases) and discrete components (bulk materials, granules, local inclusions) requires the use of a continuous-discrete formulation of the problem. An Euler approach to the description of mass, heat and momentum transfer is proposed, including the level of conservation of mass, momentum, energy, concentration of components and electric potential. A block diagram of the reproduction of physical processes in the American baking chamber of the oven is proposed. The influence of the main parameters on the baking of products is presented through fundamental level models. The baking model describes a system of connected nonlinear levels. A set of constitutive relations detailing the behavior of a multicomponent system is revealed. It is shown that such a model provides a unified basis for the analysis of thermal, hydrodynamic, mass transfer, and electrophysical processes in a wide range of devices: ovens, dryers, reactors, and other equipped food production facilities.

  • Open Access

    УДОСКОНАЛЕННЯ ЕКСТРАКЦІЇ БІОЛОГІЧНО АКТИВНИХ РЕЧОВИН ЧОРНОБРИВЦІВ ТА ГАРБУЗА ДЛЯ ХЛІБОПЕКАРСЬКОЇ ГАЛУЗІ

    by І. Я. Стадник, В. А. Піддубний, І. М. Белова, Я. В. Євчук

    У статті представлено наукове обґрунтування вибору оптимальних гідродинаміч- них режимів екстрагування біологічно активних речовин (БАР) із рослинної сировини, що характеризується різною морфологічною структурою (на прикладі м’якоті гарбуза та суцвіть чорнобривців). Актуальність дослідження зумовлена необхідністю інтенси- фікації технологічних процесів у харчовій промисловості та підвищення виходу цінних нутрієнтів, зокрема каротиноїдів, при збереженні їхньої нативної структури. У ході дослідження встановлено диференційований підхід до вибору конструкції робочих орга- нів екстрактора: для щільної паренхімної тканини гарбуза найефективнішим є викори- стання роторних пристроїв, тоді як для вилучення термолабільних сполук із чорнобривців доцільно застосовувати лопатеві мішалки, що забезпечують ощадний режим обробки. Експериментально доведено, що в діапазоні частоти обертання 100–250 об/хв відбу- вається інтенсивне зростання виходу БАР. Це пояснюється турбулізацією потоку екс- трагенту, яка призводить до зменшення товщини дифузійного прикордонного шару та суттєвого зростання коефіцієнта масовіддачі. При досягненні швидкості понад 250 об/хв динаміка екстрагування стабілізується, що свідчить про зміну лімітуючої стадії процесу. У цьому режимі опір зовнішньої гідродинаміки стає малим, а швидкість перенесення маси визначається внутрішньодифузійним опором рослинної матриці. Розраховано загальний коефіцієнт масопередачі K, який враховує капілярно-пористу структуру сировини та особливості гідродинамічного режиму. Застосування розробле- них параметрів інтенсифікації дозволило скоротити тривалість технологічного циклу на 20–22% при забезпеченні високого виходу цільових компонентів на рівні 92–94%. Встанов- лено, що додавання збагачених каротиноїдами екстрактів позитивно впливає на реоло- гічні властивості тіста (еластичність, газоутримувальну здатність) та сприяє пролон- гації термінів свіжості готових виробів завдяки антиоксидантній дії БАР. Ключові слова: екстракція, чорнобривці, гарбуз, каротиноїди, математичне моделю- вання, масообмін, коефіцієнт масовіддач

  • Modeling water vapor condensation systems to reduce heat loss and prevent global warming

    by Vasyl Dyachok, Ihor Stadnyk, Volodymyr Piddubnyi, Andrii Chahaida

    The article develops and tests a physical and mathematical model for optimizing the operation of a multistage condensation and recovery system (CRS) with the aim of improving energy efficiency and environmental safety. The key task of the modeling was to comprehensively describe the thermophysical processes, taking into account phase transitions, in particular the use of latent heat of evaporation. The modeling was performed based on computational fluid dynamics (CFD) methods, which allowed the integration of mass, momentum, and energy conservation equations with a description of water vapor condensation. This ensured accurate determination of temperature, pressure, and humidity distribution at each stage of heat exchange. The design results demonstrate the advantages of multi-stage schemes: cascade cooling increases energy efficiency by 12–18% compared to traditional single-stage counterparts. This directly leads to reduced fuel consumption and minimized heat and steam emissions, improving environmental performance. The developed model serves as a universal engineering tool for designing highly efficient and low-carbon heat recovery systems in the food industry, particularly in baking ovens and drying installations.

  • Open Access

    ВПЛИВ МОРКВЯНОГО ПЮРЕ НА ПРИГОТУВАННЯ ТІСТА ТА ПОКАЗНИКИ ЯКОСТІ ПШЕНИЧНОГО ХЛІБА

    by І. Я. Стадник, В. А. Піддубний, В. М. Гіджеліцький, С. М. Громовий, В. С. Михайлик

    У статті розглянуто доцільність використання коренеплоду – моркви як інноваційного інгредієнта у хлібопеченні та кондитерській промисловості. Метою дослідження є встановлення впливу морквяного пюре на якісні показники пшеничного хліба першого сорту та обґрунтування його використання як природного збагачувача і барвника. У роботі використано борошно пшеничне першого сорту, питну воду, дріжджі хлібопекарські пресовані, сіль та морквяне пюре, отримане шляхом відварювання та подрібнення коренеплодів. Розроблено кілька варіантів рецептур із різними пропорціями внесення морквяного пюре (10%, 15% від маси борошна). Для достовірності результатів експерименти повторювали тричі, статистичну обробку здійснювали методом варіаційного аналізу. Установлено, що внесення морквяного пюре позитивно впливає на якість хліба: вироби характеризуються більш насиченим кольором, приємним ароматом, підвищеною вологістю та ніжною текстурою. Визначено рівень заміни борошна морквяним пюре, який забезпечує поліпшення фізико-хімічних та органолептичних властивостей без погіршення структурних характеристик виробів. Відзначено, що часткова заміна борошна на овочеве пюре сприяє утриманню вологи, що, своєю чергою, дає змогу коригувати кількість рідини в рецептурі. Практичне значення роботи полягає у можливості створення продуктів підвищеної харчової цінності з покращеними сенсорними характеристиками, що відповідають тенденціям здорового харчування.

  • VITAMIN C ACCUMULATION IN FLAX SEEDS DURING GERMINATION

    by B. Iegorov, V. Piddubny, I. Stadnyk, A. Chahaida, Ya. Yevchuk, F. Marchenkov

    Research of biologically active plant raw materials for the creation of healthy food products is in recent years one of the trends in the correction of nutritional status of the population. The article describes the qualitative composition and quantitative content of valuable food products in flax seeds, due to the biochemical composition and biological value of protein. Thus, the bio activation of seeds by germination allows to activate the enzyme system. The course of biochemical processes leads to an increase in water-soluble protein fractions, the accumulation of free amino acids and fatty acids, as well as easily soluble reducing sugars. According to the increase in the value of flax and improving the functional properties of the protein present in it. The influence of parameters and duration on the process of germination of flax seeds in aqueous solution is determined. The step-by-step process of conversion of carbohydrates into vitamin C, as well as the accumulation of vitamin C in seeds during germination described. A comparative table by ascorbic acid content in some cultivars of flax, namely "Vruchiy", "Blue-orange", "Eureka", "Original" is given. The proposed method allows to increase the content of vitamin C by more than 90%, as well as to use all the anatomical parts of the seed in the technology of health products. It was found that the amount of synthesized vitamin C depends on the cultivar of germinated seeds, so the highest rate of ascorbic acid in flax seeds of the cultivar "Original", 16.56 mg/100g.

  • INCREASING THE EFFICIENCY AND RELIABILITY OF WORKING BODIES OF CRUSHING EQUIPMENT IN THE PROCESSING INDUSTRY

    by Igor Stadnik, Volodymyr Piddubnyi, Vitalii Mihailik, Ivan Zakharuk, Yurii Polievoda

    This study examines the improvement of efficiency and reliability of hammer crushers in the processing industry by applying working surfaces with a discrete structure and relief in the form of an Archimedean spiral. The wear mechanisms of crushing elements were analyzed, and design solutions were proposed to reduce wear intensity and provide a self-sharpening effect. A mathematical model of the interaction between the working elements and raw material was developed, and experimental studies on its comminution were conducted. A model of load variation on a working element with a spiral-shaped edge was proposed, taking into account contact dynamics and blade geometry. The model is based on the principles of deformable solid mechanics and contact theory. Comparative analysis demonstrated that the hammer profile shape significantly influences the interaction with the material. It was found that the use of a profile in the form of an Archimedean spiral improves the dynamic characteristics of the process and reduces energy consumption. Modeling has confirmed that the equilibrium position of the hammer during the rotation of the rotor is a critical condition for effective grinding of grain raw materials. Deviation from this position causes a decrease in productivity, an increase in dynamic loads and accelerated surface wear. The proposed configuration provides a uniform distribution of loads, reduction of contact stresses and increase the durability of the working bodies. The results can be used to modernize crushers to increase their reliability and reduce service costs. In addition, the analysis showed the possibility of optimizing the geometric parameters of the rotor, which reduces the power consumption of the installation and improve the quality of the final product. This creates the basis for further research in the direction of improving the structures of rotary crushers and the introduction of energy efficient technological solutions in the processing industry.

  • Open Access

    АСПЕКТИ ДОСЛІДЖЕННЯ БІЛКОВОГО СКЛАДУ БОРОШНА ІЗ ЦВІРКУНІВ

    by Ольга Г. Середа, Оксана Ю. Мельник, Tetiana V. Rudakova, Сергій А. Наріжний, Сергій П. Боковець, Roman V. Shkaraputa, Ольга А. Маяк, Natalia V. Fedak, Володимир А. Піддубний, Яна В. Євчук, et al.

    This study presents data on the biological value of wheat and cricket flour, focusing on their amino acid composition and protein digestibility. With rising demand for high-protein foods, alternative sources like insect flour particularly from Acheta domesticus – are gaining attention. Crickets contain 40–75 % protein, 15–40 % fats (including essential fatty acids), and 3–10 % minerals per 100 g of dry matter. Despite consumer resistance to entomophagy, processing insects into flour improves acceptability. The main goal of this study was to evaluate the protein content, amino acid profile, and digestibility of cricket flour compared to wheat flour. Protein content was measured using standard chemical methods, including the Kjeldahl method. Amino acid composition was analysed using high-performance liquid chromatography (HPLC), and digestibility was assessed through amino acid indices, which reflect the body’s ability to utilise proteins. Results show that while wheat flour contains key amino acids, its profile is not fully balanced to meet human nutritional needs. In contrast, cricket flour demonstrates a richer and more balanced amino acid composition, particularly in essential amino acids. Chromatographic analysis confirmed higher amino acid content in cricket flour, supporting its superior biological value. Moreover, cricket flour exhibited higher digestibility than wheat flour, highlighting its potential in dietary applications. In conclusion, cricket flour is a promising alternative protein source due to its balanced amino acid profile, higher digestibility, and greater nutritional value compared to wheat flour.