Yun-Seok Jun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yun-Seok Jun has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Wook Ahn
Department of Energy Engineering, Soonchunhyang University, Asan-si, Korea
7 shared publications Neema Cyril Karima
Department of Energy Engineering, Soonchunhyang University, Asan-si, Korea
4 shared publications- Sung Nam Lim
Korea Institute of Industrial Technology (KITECH) 143 Hanggaul-ro, Sangnok-gu
4 shared publications Juyun Lee
Extreme Materials Research Center and Convergence Research Center for Solutions to Electromagnetic Interference in Future-Mobility, Korea Institute of Science and Technology, Seoul, Republic of Korea
3 shared publicationsYounghyun Cho
Department of Energy Engineering, Soonchunhyang University, Asan-si, Korea
3 shared publicationsIn-Hyeok Hwang
Department of Polymer Engineering, Pukyong National University, Busan, Republic of Korea
2 shared publications
Latest Publications
- 28 September 2026
- Published by Springer Nature in Macromolecular Research
- Vol. 34 (10) , 1211-1219
Oriented porous non-oxidized graphene flakes/PVDF composite foams for lightweight and absorption-enhanced EMI shielding
- 28 September 2026
- Published by Springer Nature in Macromolecular Research
- Vol. 34 (10) , 1211-1219
Oriented porous non-oxidized graphene flakes/PVDF composite foams for lightweight and absorption-enhanced EMI shielding
- 7 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (36) , 49833-49846
Directionally Aligned, Defect-Suppressed Non-oxidatively Exfoliated Graphene Flakes for High EMI Shielding Performance
In this study, we report the development of high-performance electromagnetic interference (EMI) shielding composites incorporating directionally aligned non-oxidatively exfoliated graphene flakes (NOGF) within a polydimethylsiloxane (PDMS) matrix. The NOGF was synthesized via exfoliation of graphite intercalation compounds without oxidative treatment, thereby preserving their intrinsic graphitic structure with minimal defect formation. A unidirectional freeze-casting process was employed to fabricate anisotropically aligned NOGF aerogels, which were subsequently infiltrated with PDMS. The resulting NOGF/PDMS composites with a loading of 1.9 wt % exhibited significantly enhanced EMI shielding effectiveness (SE) compared to reduced graphene oxide (rGO)/PDMS counterparts with a loading of 1.7 wt %, achieving a mean SE of 67.2 dB at 2.3 mm thickness, while th rGO/PDMS composites reached 31.1 dB at 2.5 mm. Directional alignment was also found to play a critical role, as longitudinally cut samples consistently outperformed those in the transverse direction. This work highlights the potential of low-filler-content graphene composites for multifunctional EMI shielding applications.
- 7 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (36) , 49833-49846
Directionally Aligned, Defect-Suppressed Non-oxidatively Exfoliated Graphene Flakes for High EMI Shielding Performance
In this study, we report the development of high-performance electromagnetic interference (EMI) shielding composites incorporating directionally aligned non-oxidatively exfoliated graphene flakes (NOGF) within a polydimethylsiloxane (PDMS) matrix. The NOGF was synthesized via exfoliation of graphite intercalation compounds without oxidative treatment, thereby preserving their intrinsic graphitic structure with minimal defect formation. A unidirectional freeze-casting process was employed to fabricate anisotropically aligned NOGF aerogels, which were subsequently infiltrated with PDMS. The resulting NOGF/PDMS composites with a loading of 1.9 wt % exhibited significantly enhanced EMI shielding effectiveness (SE) compared to reduced graphene oxide (rGO)/PDMS counterparts with a loading of 1.7 wt %, achieving a mean SE of 67.2 dB at 2.3 mm thickness, while th rGO/PDMS composites reached 31.1 dB at 2.5 mm. Directional alignment was also found to play a critical role, as longitudinally cut samples consistently outperformed those in the transverse direction. This work highlights the potential of low-filler-content graphene composites for multifunctional EMI shielding applications.
- 4 July 2026
- Published by Springer Nature in Carbon Letters
- Vol. 36 (4) , 1-15
Li-IL@CuBTC-enhanced PEO composite polymer electrolytes for solid-state lithium batteries
- 4 July 2026
- Published by Springer Nature in Carbon Letters
- Vol. 36 (4) , 1-15
Li-IL@CuBTC-enhanced PEO composite polymer electrolytes for solid-state lithium batteries
- 19 March 2026
- Published by Springer Nature in Macromolecular Research
- Vol. 34 (5) , 631-642
Simple fabrication of PEDOT: PSS-based microfiber organic electrochemical transistors for neuromorphic memory applications
- 19 March 2026
- Published by Springer Nature in Macromolecular Research
- Vol. 34 (5) , 631-642
Simple fabrication of PEDOT: PSS-based microfiber organic electrochemical transistors for neuromorphic memory applications
- Open Access
- 5 August 2025
- Published by Elsevier in Carbon Trends
- Vol. 20
The role of two-dimensional materials in advancing triboelectric nanogenerators: A review
- 5 August 2025
- Published by Elsevier in Carbon Trends
- Vol. 20
Open AccessThe role of two-dimensional materials in advancing triboelectric nanogenerators: A review
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Synergistic Effects of F Doping and CNT Incorporation in ZnMn 2 O 4 Cathode Materials to Achieve High‐Performance Aqueous Zinc‐Ion Batteries
Mn‐based materials are promising cathode candidates for aqueous Zn‐ion batteries (AZIBs) because of their high‐voltage platforms, environmental friendliness, and nontoxicity. However, their practical applications are limited by the rapid capacity decay caused by their slow electrochemical reaction kinetics and intrinsically poor conductivity. In this study, F ‐doped ZnMn 2 O 4 (ZMO) (F‐ZMO) microspheres incorporated with carbon nanotubes (CNTs) were synthesized and investigated to overcome these limitations. F ‐doping induced structural modifications by generating oxygen defects, which improved the ion diffusion and electronic conductivity. In addition, it improved the structure stability owing to the formation of strong metal‐ F bonds. These doping effects led to enhanced rate performance and cycle stability. Furthermore, the incorporation of CNTs complemented the insufficient electrical conductivity of the cathode material. The resulting F‐ZMO/carbon nanotube (CNT) composites exhibited superior charge–transfer kinetics. Consequently, they achieved an enhanced discharge capacity of 122.2 mAh g −1 at a high current density of 2.0 A g −1 , demonstrating significantly improved performance compared to those of ZMO and ZMO/CNT. These findings highlight the synergistic effect of F ‐doping and CNT incorporation in enhancing the electrochemical properties of ZMO cathodes and provide critical insights into the development of high‐performance cathode materials for AZIBs.
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Open AccessSynergistic Effects of F Doping and CNT Incorporation in ZnMn 2 O 4 Cathode Materials to Achieve High‐Performance Aqueous Zinc‐Ion Batteries
Mn‐based materials are promising cathode candidates for aqueous Zn‐ion batteries (AZIBs) because of their high‐voltage platforms, environmental friendliness, and nontoxicity. However, their practical applications are limited by the rapid capacity decay caused by their slow electrochemical reaction kinetics and intrinsically poor conductivity. In this study, F ‐doped ZnMn 2 O 4 (ZMO) (F‐ZMO) microspheres incorporated with carbon nanotubes (CNTs) were synthesized and investigated to overcome these limitations. F ‐doping induced structural modifications by generating oxygen defects, which improved the ion diffusion and electronic conductivity. In addition, it improved the structure stability owing to the formation of strong metal‐ F bonds. These doping effects led to enhanced rate performance and cycle stability. Furthermore, the incorporation of CNTs complemented the insufficient electrical conductivity of the cathode material. The resulting F‐ZMO/carbon nanotube (CNT) composites exhibited superior charge–transfer kinetics. Consequently, they achieved an enhanced discharge capacity of 122.2 mAh g −1 at a high current density of 2.0 A g −1 , demonstrating significantly improved performance compared to those of ZMO and ZMO/CNT. These findings highlight the synergistic effect of F ‐doping and CNT incorporation in enhancing the electrochemical properties of ZMO cathodes and provide critical insights into the development of high‐performance cathode materials for AZIBs.
- Open Access
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Facile Synthesis Method of Self‐Assembled Ni‐Rich LiNi0.8Mn0.1Co0.1O2/rGO Composite for High‐Performance Li‐Ion Batteries
A hybrid material, LiNi0.8Co0.1Mn0.1O2, with excess lithium and wrapped in reduced graphene oxide (rGO), has been synthesized through ultrasonication employing Triton X as a surfactant. The ultrasonication process breaks down the initially clustered large particles into small nanoparticles, ensuring a uniform composite with reduced graphene oxide. With a consistent capacity retention of 87.56% over 100 cycles, the cathode composite exhibits a promising initial capacity of around 250 mAh g−1 at 0.1 C. Notably, the composite has high‐rate capability, providing capacities of 230 and 178.9 mAh g−1 at 0.2 and 2 C, respectively. These experimental results indicate that the well‐dispersed LiNi0.8Co0.1Mn0.1O2 nanoparticles and the porous reduced graphene oxide framework work in concert to enhance the electrochemical performance of the reduced graphene oxide‐wrapped LiNi0.8Co0.1Mn0.1O2 cathode material, which was achieved through ultrasonication with Triton X (TX‐100) surfactant assistance. This synergy allows for the fast diffusion of both Li ions (Li+) and electrons (e−) while also allowing volumetric variations during the introduction and withdrawal of Li ions (Li+). As a result, the fabrication of this reduced graphene oxide‐wrapped LiNi0.8Co0.1Mn0.1O2 cathode material shows promise as a high‐rate cathode material, especially for energy storage applications.
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Open AccessFacile Synthesis Method of Self‐Assembled Ni‐Rich LiNi0.8Mn0.1Co0.1O2/rGO Composite for High‐Performance Li‐Ion Batteries
A hybrid material, LiNi0.8Co0.1Mn0.1O2, with excess lithium and wrapped in reduced graphene oxide (rGO), has been synthesized through ultrasonication employing Triton X as a surfactant. The ultrasonication process breaks down the initially clustered large particles into small nanoparticles, ensuring a uniform composite with reduced graphene oxide. With a consistent capacity retention of 87.56% over 100 cycles, the cathode composite exhibits a promising initial capacity of around 250 mAh g−1 at 0.1 C. Notably, the composite has high‐rate capability, providing capacities of 230 and 178.9 mAh g−1 at 0.2 and 2 C, respectively. These experimental results indicate that the well‐dispersed LiNi0.8Co0.1Mn0.1O2 nanoparticles and the porous reduced graphene oxide framework work in concert to enhance the electrochemical performance of the reduced graphene oxide‐wrapped LiNi0.8Co0.1Mn0.1O2 cathode material, which was achieved through ultrasonication with Triton X (TX‐100) surfactant assistance. This synergy allows for the fast diffusion of both Li ions (Li+) and electrons (e−) while also allowing volumetric variations during the introduction and withdrawal of Li ions (Li+). As a result, the fabrication of this reduced graphene oxide‐wrapped LiNi0.8Co0.1Mn0.1O2 cathode material shows promise as a high‐rate cathode material, especially for energy storage applications.