Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yue Cao has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bi/CeO2–Decorated CuS Electrocatalysts for CO2-to-Formate Conversion

    by Qi Wang, Qi Wang, Qi Wang, Qi Wang, Tianshuang Bao, Tianshuang Bao, Tianshuang Bao, Tianshuang Bao, Xiangchuan Zhao, Xiangchuan Zhao, et al.

    The electrocatalytic carbon dioxide (CO2) reduction reaction (CO2RR) is extensively regarded as a promising strategy to reach carbon neutralization. Copper sulfide (CuS) has been widely studied for its ability to produce C1 products with high selectivity. However, challenges still remain owing to the poor selectivity of formate. Here, a Bi/CeO2/CuS composite was synthesized using a simple solvothermal method. Bi/CeO2–decorated CuS possessed high formate selectivity, with the Faraday efficiency and current density reaching 88% and 17 mA cm−2, respectively, in an H-cell. The Bi/CeO2/CuS structure significantly reduces the energy barrier formed by OCHO*, resulting in the high activity and selectivity of the CO2 conversion to formate. Ce4+ readily undergoes reduction to Ce3+, allowing the formation of a conductive network of Ce4+/Ce3+. This network facilitates electron transfer, stabilizes the Cu+ species, and enhances the adsorption and activation of CO2. Furthermore, sulfur catalyzes the OCHO* transformation to formate. This work describes a highly efficient catalyst for CO2 to formate, which will aid in catalyst design for CO2RR to target products.


  • Open Access

    Multicomponent Nanoparticles Decorating a Lignin-Derived Biochar Composite for 2-Nitrophenol Sensing

    by Tianshuang Bao, Qi Wang, Yuhang Jiang, Xiangchuan Zhao, Yue Cao, Jun Cao, Qiaoling Li, Weimeng Si

    Lignin, which contains aromatic phenols, is the second most abundant renewable biomass material in the world. It is the main byproduct of the paper industry and is characterized by abundant sources, renewability, and low cost. The present study focused on the extraction of lignin from poplar wood through a straightforward papermaking approach, thereafter utilizing the resultant black liquor containing lignin for synthesizing lignin-based phenolic resins. During the polymerization process, cobalt (Co) and nickel (Ni) species were introduced and, subsequently, a CoNi/biochar catalyst was obtained through pyrolysis in a nitrogen atmosphere. The prepared catalyst possessed rough spherical structures. The incorporation of Co and Ni enhanced charge redistribution, thereby imparting the catalyst with strong electron acceptance capabilities. The prepared lignin-based phenolic-resin-derived carbon was used for the electrochemical sensing of 2-nitrophenol. The limit of detection (LOD) for 2-nitrophenol was calculated to be 0.0132 µM, with good repeatability, stability, and selectivity.


  • Open Access

    Fe–Decorated Nitrogen–Doped Carbon Nanospheres as an Electrochemical Sensing Platform for the Detection of Acetaminophen

    by Xiangchuan Zhao, Liping Zhang, Zhaoyun Chu, Qing Wang, Yue Cao, Jun Cao, Jiao Li, Wu Lei, Boming Zhang, Weimeng Si

    In this work, Fe–decorated nitrogen–doped carbon nanospheres are prepared for electrochemical monitoring of acetaminophen. Via a direct pyrolysis of the melamine–formaldehyde resin spheres, the well–distributed Fe–NC spheres were obtained. The as–prepared Fe–NC possesses enhanced catalysis towards the redox of acetaminophen for abundant active sites and high–speed charge transfer. The effect of loading Fe species on the electrochemical sensing of acetaminophen is investigated in detail. The synergistic effect of nitrogen doping along with the above–mentioned properties is taken advantage of in the fabrication of electrochemical sensors for the acetaminophen determination. Based on the calibration plot, the limits of detection (LOD) were calculated to be 0.026 μM with a linear range from 0–100 μM. Additionally satisfactory repeatability, stability, and selectivity are obtained.


  • Open Access

    Preparation of a Flexible Reduced Graphene Oxide-Si Composite Film and Its Application in High-Performance Lithium Ion Batteries

    by Zhaoyun Chu, Xiangchuan Zhao, Qi Wang, Tianshuang Bao, Hongxiang Li, Yue Cao, Boming Zhang, Jun Cao, Weimeng Si

    This paper describes a strategy for preparing free-standing reduced graphene oxide@Si nanoparticles (rGO@Si NPs) composite membranes. Graphene oxide (GO) was reduced and self-assembled synchronously with nanoparticles of silicon (Si NPs) on a metal surface and the composite film was subsequently used in a lithium-ion battery (LIB). This work describes several important novel aspects of the reported technology. Firstly, the composite membrane has a flexible self-supporting structure, allowing it to function as an anode material without requiring binders and current collectors. Secondly, the successful assembly of Si NPs and reduced Graphene oxide (rGO) sheets has enabled the production of the rGO@Si NPs composite film with high controllability and orderliness. Thirdly, the conductive nature of graphene has significantly decreased the resistivity while enhancing the electron transport capacity of the battery anode. Lastly, the robust and flexible structure of the graphene sheet has greatly mitigated the large volume variation in Si NPs during charging or discharging, resulting in the rGO@Si NPs composite film exhibiting excellent energy density and high-power density.


  • Open Access

    Recent Advances on Heteroatom-Doped Porous Carbon—Based Electrocatalysts for Oxygen Reduction Reaction

    by Xue Li, Guolei Liu, Han Zheng, Kuizhao Sun, Linna Wan, Jing Cao, Saira Asif, Yue Cao, Weimeng Si, Fagang Wang, et al.

    Polymer electrolyte membrane fuel cells are considered one of the alternatives to fossil energy sources. The slow kinetics of the oxygen reduction reaction (ORR) at the cathode and the high price of Pt-based catalysts remain one of the key challenges for the commercial viability of proton exchange membrane fuel cells. However, their high cost and susceptibility to poisoning severely limit their use for large-scale commercial applications in fuel cells. Heteroatom-doped porous carbon has attracted extensive attention from scientists due to its advantages such as high specific surface area and the properties conferred by heteroatom doping. On the one hand, we discuss a variety of current methods for the preparation of heteroatom-doped porous carbons, including the template method and the activation method. On the other hand, we discuss the application of heteroatom-doped porous carbon in Pt catalysts, transition metal catalysts and metal-free catalysts. Finally, we also present the pre-existing and challenges of heteroatoms in ORR catalysis, which will drive the development of ORR catalysts.


  • Open Access

    The Biomass of Pig-Blood-Derived Carbon as a Novel Electrode Material for Hydrogen Peroxide Electrochemical Sensing

    by Guolei Liu, Xue Li, Qing Wang, Kuizhao Sun, Chuping Lee, Yue Cao, Weimeng Si, Haoran Wei, Zhongfang Li, Fagang Wang

    In the work, a pig-blood-derived mesoporous carbon (BC) was prepared as a novel Fe-N-C material for the electrochemical sensor to detect hydrogen peroxide. Because of the unique nanostructure of Fe-BCs with rough surface structure, hierarchical pores, and high graphitization degree, the Fe-BCs, as a kind of advanced electrode material, exhibited remarkable performance in electrocatalysis. The sensor based on Fe-BCs exhibited an extra-long range from c and a detection limit of 0.046 μM (S/N = 3). The synthesis of low-cost, advanced carbon-based electrode materials from environmentally friendly pig blood for electrochemical sensor construction is a promising approach.


  • Facile Synthesis of Paper-Derived Porous Activated Carbon and the Electrochemical Determination of Hydrogen Peroxide

    by Yuhang Jiang, Xiangchuan Zhao, Qing Wang, Yegeng Sun, Yue Cao, Ning Han, Chuping Lee, Jun Cao, Jiao Li, Weimeng Si

    We report here a high specific surface area activated carbon loaded with hemin (H-PAC) was synthesized by one-step in situ pyrolysis of paper. As the carrier of hemin, paper - derived activated carbon(PAC) showed high specific surface area (3157 m 2 g −1 ) after optimization. The surface concentration of hemin in the material was effectively increased. Particularly, PAC had a unique interconnected porous structure, which can be used as a continuous conductive framework and provide more active sites. Hemin maintained peroxidase-like activity and showed superior synergistic effect with PAC via pyrolysis, displaying rapid redox characteristics. Under the optimized condition, the composite exhibits high electro–catalytic activities for H 2 O 2 reduction with a low detection limit of 0.087 μ M, and high selectivity.


  • Open Access

    Pt/Pd Decorate MOFs Derived Co-N-C Materials as High-Performance Catalysts for Oxygen Reduction Reaction

    by Yuhang Jiang, Dejing Zhu, Xiangchuan Zhao, Zhaoyun Chu, Liping Zhang, Yue Cao, Weimeng Si

    We report here, a strategy to prepare Pt/Pd nanoparticles decorated with Co-N-C materials, where Co-N-C was obtained via pyrolysis of ZIF-67 directly. As-prepared Pt/Pd/Co-N-C catalysts showed excellent ORR performance, offered with a higher limit current density (6.6 mA cm−2) and similar half-wave potential positive (E1/2 = 0.84 V) compared with commercial Pt/C. In addition to an ORR activity, it also exhibits robust durability. The current density of Pt/Pd/Co-N-C decreased by only 9% after adding methanol, and a 10% current density loss was obtained after continuous testing at 36,000 s.


  • Biomass-derived N,S co-doped 3D multichannel carbon supported Au@Pd@Pt catalysts for oxygen reduction

    by Yegeng Sun, Wei Zhang, Qing Wang, Ning Han, Avelino Núñez-Delgado, Yue Cao, Weimeng Si, Fagang Wang, Shaomin Liu