Qian Zhou
Qian Zhou has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Haiyun An
State Grid Jiangsu Electric Power Research Institute, Nanjing 211100, China
4 shared publications - Bingcheng Cen
State Grid Jiangsu Electric Power Co., Ltd., Research Institute, Nanjing 211102, China
3 shared publications - Qiuwei Wu
Tianjin University
3 shared publications - Cheng Huang
State Grid Jiangsu Electric Power Research Institute, Nanjing 211100, China
2 shared publications - Jiaxun Li
Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
2 shared publications - Minghui Yin
School of Automation, Nanjing University of Science and Technology, Nanjing, China
2 shared publications
Latest Publications
- Open Access
Accurate Location Method for Abnormal Line Losses in Distribution Network Considering Topology Matching and Parameter Estimation in Grid
With the increasing emphasis on managing line losses, accurately locating and analyzing abnormal line losses in distribution networks has become a critical challenge in implementing effective loss reduction strategies. Aiming at locating and analyzing abnormal line losses caused by equipment aging in the distribution network, an accurate location method considering topology matching and parameter estimation in the grid is proposed. Firstly, a topology matching model based on a support vector machine in the grid is established to identify the real-time topology connection relationship within the distribution network. The accuracy of SVM is enhanced through an optimized parameter selection strategy. Secondly, a multi-objective optimization model is built employing the operation data collected by the measurement equipment, focusing on voltage and power estimation to form a parameter estimation model. This model focuses on voltage and power estimation, improving the accuracy of parameter estimation compared to single-parameter optimization methods. The weighting coefficient is selected to minimize the solution error. Finally, by comparing the deviation between the estimated values of the branch parameters and the theoretical values, the aging degree of each branch is evaluated, and branches with abnormal line losses are accurately located. The effectiveness of the proposed method is verified using the IEEE 33-bus distribution network, demonstrating its potential for improving the accuracy of identifying abnormal line losses caused by equipment aging and supporting enhanced distribution network management.
Open AccessAccurate Location Method for Abnormal Line Losses in Distribution Network Considering Topology Matching and Parameter Estimation in Grid
With the increasing emphasis on managing line losses, accurately locating and analyzing abnormal line losses in distribution networks has become a critical challenge in implementing effective loss reduction strategies. Aiming at locating and analyzing abnormal line losses caused by equipment aging in the distribution network, an accurate location method considering topology matching and parameter estimation in the grid is proposed. Firstly, a topology matching model based on a support vector machine in the grid is established to identify the real-time topology connection relationship within the distribution network. The accuracy of SVM is enhanced through an optimized parameter selection strategy. Secondly, a multi-objective optimization model is built employing the operation data collected by the measurement equipment, focusing on voltage and power estimation to form a parameter estimation model. This model focuses on voltage and power estimation, improving the accuracy of parameter estimation compared to single-parameter optimization methods. The weighting coefficient is selected to minimize the solution error. Finally, by comparing the deviation between the estimated values of the branch parameters and the theoretical values, the aging degree of each branch is evaluated, and branches with abnormal line losses are accurately located. The effectiveness of the proposed method is verified using the IEEE 33-bus distribution network, demonstrating its potential for improving the accuracy of identifying abnormal line losses caused by equipment aging and supporting enhanced distribution network management.
- Open Access
Inertia Support Capability Evaluation for Wind Turbine Generators Based on Symmetrical Operation
With the increasing integration of new energy into the grid, the level of system inertia has been significantly reduced, posing a severe challenge to frequency stability. Consequently, there is an urgent need for wind turbine generators (WTGs) to actively provide inertia support through virtual inertia control. Assessing the inertia support capability of WTGs reasonably and setting appropriate controller parameters based on this assessment is a topic worthy of discussion. As WTGs’ characteristics are mostly ignored in the evaluation of inertia support capability for WTGs, an evaluation method based on symmetrical operation is proposed. The proposed method considers the impact of real inertia and aerodynamic characteristics, thereby helping to determine reasonable virtual inertia coefficients and de-loading reserve capacity for WTGs. With the proposed method, it can be determined that large WTGs can provide inertia support capabilities close to those of synchronous generators to the grid without exceeding a 0.1% reduction in reserve capacity during de-loading operation.
Open AccessInertia Support Capability Evaluation for Wind Turbine Generators Based on Symmetrical Operation
With the increasing integration of new energy into the grid, the level of system inertia has been significantly reduced, posing a severe challenge to frequency stability. Consequently, there is an urgent need for wind turbine generators (WTGs) to actively provide inertia support through virtual inertia control. Assessing the inertia support capability of WTGs reasonably and setting appropriate controller parameters based on this assessment is a topic worthy of discussion. As WTGs’ characteristics are mostly ignored in the evaluation of inertia support capability for WTGs, an evaluation method based on symmetrical operation is proposed. The proposed method considers the impact of real inertia and aerodynamic characteristics, thereby helping to determine reasonable virtual inertia coefficients and de-loading reserve capacity for WTGs. With the proposed method, it can be determined that large WTGs can provide inertia support capabilities close to those of synchronous generators to the grid without exceeding a 0.1% reduction in reserve capacity during de-loading operation.
- Open Access
- 14 August 2024
- Published by MDPI AG in Electronics
- Vol. 13 (16) , 3218
The Coordination Control Strategy for Improving Systems Frequency Stability Based on HVDC Quota Power Support
This paper aims to improve the recovery characteristics of the receiving grid during DC blocking failures through DC emergency power support, revealing the mechanism of improving the power angle stability of the receiving grid through timely DC power increase and decrease. Based on the transmission pattern of “north-to-south power transmission” in a certain provincial power grid, the actual maximum long-term overload capacity of multiple DC lines is calculated, considering multiple constraints such as the strength of the receiving grid, the stability limit of AC evacuation channels, and DC overload capacity. A multi-DC emergency power support strategy after DC blocking is developed, avoiding the risk of AC transmission channel overload caused by power flow transfer, reducing the impact of large-capacity DC blocking and inappropriate DC power increases on the receiving grid, and achieving coordination between AC and DC systems. The effectiveness of the proposed strategy is verified through simulation.
- 14 August 2024
- Published by MDPI AG in Electronics
- Vol. 13 (16) , 3218
Open AccessThe Coordination Control Strategy for Improving Systems Frequency Stability Based on HVDC Quota Power Support
This paper aims to improve the recovery characteristics of the receiving grid during DC blocking failures through DC emergency power support, revealing the mechanism of improving the power angle stability of the receiving grid through timely DC power increase and decrease. Based on the transmission pattern of “north-to-south power transmission” in a certain provincial power grid, the actual maximum long-term overload capacity of multiple DC lines is calculated, considering multiple constraints such as the strength of the receiving grid, the stability limit of AC evacuation channels, and DC overload capacity. A multi-DC emergency power support strategy after DC blocking is developed, avoiding the risk of AC transmission channel overload caused by power flow transfer, reducing the impact of large-capacity DC blocking and inappropriate DC power increases on the receiving grid, and achieving coordination between AC and DC systems. The effectiveness of the proposed strategy is verified through simulation.
- Open Access
- 10 January 2024
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 15 (1) , 24
Benefit Evaluation of Carbon Reduction and Loss Reduction under a Coordinated Transportation–Electricity Network
With the extensive promotion of new energy vehicles, the number of electric vehicles (EVs) in China has increased rapidly. Electric vehicles are densely parked in garages, which means parking garages contain a large amount of idle energy storage resources. How to make this idle energy storage in garages participate in power system dispatch and evaluate the network loss and system carbon emissions considering electric vehicle energy storage has become an important research topic. The uncertainty around parking habits for electric vehicles causes it to be difficult to predict compared with the traditional energy storage system. Therefore, it is necessary to study its influence on the synergistic effect of loss reduction and carbon reduction as energy storage access. The benefits of new energy power generation output growth, energy waste reduction, and carbon emission reduction brought by loss reduction measures can be well reflected in the loss reduction index system of a power system in a low-carbon scenario. In this paper, a large amount of parking information in a certain area is collected, and the approximate parking habits of all vehicles in the simulated garage are obtained by the Monte Carlo method. Then, the load aggregation model is established, which is incorporated into the power system as an energy storage model. The synergy of loss reduction and carbon reduction is considered in this paper and comprehensively optimizes the strategy of integrating electric vehicles into the power system from the perspectives of electricity and carbon. In the scenarios of carbon flow calculation and network loss calculation, the YALMIP and CPLEX of MATLAB are applied, with various constraints input for simulation, so that the benefit evaluation method of carbon reduction and loss reduction under a coordinated transportation–electricity network is obtained.
- 10 January 2024
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 15 (1) , 24
Open AccessBenefit Evaluation of Carbon Reduction and Loss Reduction under a Coordinated Transportation–Electricity Network
With the extensive promotion of new energy vehicles, the number of electric vehicles (EVs) in China has increased rapidly. Electric vehicles are densely parked in garages, which means parking garages contain a large amount of idle energy storage resources. How to make this idle energy storage in garages participate in power system dispatch and evaluate the network loss and system carbon emissions considering electric vehicle energy storage has become an important research topic. The uncertainty around parking habits for electric vehicles causes it to be difficult to predict compared with the traditional energy storage system. Therefore, it is necessary to study its influence on the synergistic effect of loss reduction and carbon reduction as energy storage access. The benefits of new energy power generation output growth, energy waste reduction, and carbon emission reduction brought by loss reduction measures can be well reflected in the loss reduction index system of a power system in a low-carbon scenario. In this paper, a large amount of parking information in a certain area is collected, and the approximate parking habits of all vehicles in the simulated garage are obtained by the Monte Carlo method. Then, the load aggregation model is established, which is incorporated into the power system as an energy storage model. The synergy of loss reduction and carbon reduction is considered in this paper and comprehensively optimizes the strategy of integrating electric vehicles into the power system from the perspectives of electricity and carbon. In the scenarios of carbon flow calculation and network loss calculation, the YALMIP and CPLEX of MATLAB are applied, with various constraints input for simulation, so that the benefit evaluation method of carbon reduction and loss reduction under a coordinated transportation–electricity network is obtained.
- Open Access
- 31 July 2023
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 14 (8) , 204
Carbon Market Trading Mechanisms Considering Multi-Layer Reactive Power Compensation
In the context of achieving carbon peaking and carbon neutrality goals, focusing on coordinated efficiency in loss and carbon reduction, and promoting comprehensive green transformation of economic and social development are critical strategies. Line loss is an economic and technical indicator for measuring losses in a power system, and loss reduction is one of the important ways to achieve the carbon peaking and carbon neutrality goals in the power system. However, with the continuous increase in the power grid scale and the increasingly complex operation mode of the system, it is difficult to clearly quantify the carbon reduction benefits brought by system loss reduction. In order to synergize grid loss reduction and system carbon reduction, and generate economic and environmental benefits at the same time, this paper proposes a carbon market trading model that considers multi-layer reactive power compensation strategies. Based on the carbon emission flow model, a node carbon cost pricing is formed, and multi-layer reactive power compensation measures are set in the distribution network nodes to obtain an optimal loss reduction strategy, with the carbon market trading cost minimization as the objective. The effectiveness of the model is verified by simulating and analyzing four scenarios. Compared with the original system that does not consider carbon trading and reactive compensation, the model proposed in this paper can reduce losses by 20% and reduce carbon emissions by 5.7%. This paper is of great value for reactive power loss reduction management in distribution networks of a low-carbon background.
- 31 July 2023
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 14 (8) , 204
Open AccessCarbon Market Trading Mechanisms Considering Multi-Layer Reactive Power Compensation
In the context of achieving carbon peaking and carbon neutrality goals, focusing on coordinated efficiency in loss and carbon reduction, and promoting comprehensive green transformation of economic and social development are critical strategies. Line loss is an economic and technical indicator for measuring losses in a power system, and loss reduction is one of the important ways to achieve the carbon peaking and carbon neutrality goals in the power system. However, with the continuous increase in the power grid scale and the increasingly complex operation mode of the system, it is difficult to clearly quantify the carbon reduction benefits brought by system loss reduction. In order to synergize grid loss reduction and system carbon reduction, and generate economic and environmental benefits at the same time, this paper proposes a carbon market trading model that considers multi-layer reactive power compensation strategies. Based on the carbon emission flow model, a node carbon cost pricing is formed, and multi-layer reactive power compensation measures are set in the distribution network nodes to obtain an optimal loss reduction strategy, with the carbon market trading cost minimization as the objective. The effectiveness of the model is verified by simulating and analyzing four scenarios. Compared with the original system that does not consider carbon trading and reactive compensation, the model proposed in this paper can reduce losses by 20% and reduce carbon emissions by 5.7%. This paper is of great value for reactive power loss reduction management in distribution networks of a low-carbon background.
- Open Access
- 17 July 2018
- Published by Springer Nature in Journal of Modern Power Systems and Clean Energy
- Vol. 7 (2) , 297-308
Optimal transmission switching to eliminate voltage violations during light-load periods using decomposition approach
- 17 July 2018
- Published by Springer Nature in Journal of Modern Power Systems and Clean Energy
- Vol. 7 (2) , 297-308
Open AccessOptimal transmission switching to eliminate voltage violations during light-load periods using decomposition approach
- Open Access
- 17 November 2017
- Published by Springer Nature in Journal of Modern Power Systems and Clean Energy
- Vol. 5 (6) , 908-916
Optimized dispatch of wind farms with power control capability for power system restoration
- 17 November 2017
- Published by Springer Nature in Journal of Modern Power Systems and Clean Energy
- Vol. 5 (6) , 908-916
Open AccessOptimized dispatch of wind farms with power control capability for power system restoration
- Open Access
- 2 May 2017
- Published by Springer Nature in Journal of Modern Power Systems and Clean Energy
- Vol. 6 (1) , 181-189
Subsynchronous resonance and its mitigation for power system with unified power flow controller
- 2 May 2017
- Published by Springer Nature in Journal of Modern Power Systems and Clean Energy
- Vol. 6 (1) , 181-189
Open AccessSubsynchronous resonance and its mitigation for power system with unified power flow controller