Shaoying Chang
Shaoying Chang has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Bing Li
Tarim Oilfield Company, PetroChina, Korla 841000, China
1 shared publication - Chao Ni
School of Earth Science, Zhejiang University, Hangzhou 310058, China
1 shared publication - Chao Yao
Tarim Oilfield Company, PetroChina, Korla 841000, China
1 shared publication Guanming Shao
PetroChina Hangzhou Research Institute of Geology Hangzhou 310023 China petrochina.com.cn
1 shared publication- Hanlin Chen
School of Earth Sciences Zhejiang University Hangzhou China
1 shared publication - Jiajun Chen
Hangzhou Research Institute of Geology, PetroChina, Hangzhou 310023, China
1 shared publication
Latest Publications
- Open Access
- 24 June 2026
- Published by MDPI AG in Geosciences
- Vol. 16 (7) , 247
Multi-Stage Tectonic Superposition and the Evolution of Strike–Slip Faults in the Central Sichuan Basin of China
In recent years, laterally extensive strike–slip faults with relatively small displacement have been recognized in the central Sichuan Basin during deep hydrocarbon exploration. These faults segment the structural framework and provide key conduits for fluid migration and pathways for reservoir reworking, thereby exerting first-order control on hydrocarbon migration and accumulation. To characterize their geometry, kinematics, multi-stage evolution, and genetic mechanisms—and to address structural uncertainties limiting deep exploration—we integrate newly processed high-resolution 3D seismic data covering ~22,000 km2 with drilling data from 28 drillings that penetrate the Sinian Dengying Formation in the central and western Sichuan Basin. Using coherence–attribute imaging and detailed fault interpretation, we examine the coupling between tectonic superposition and strike–slip fault development. Three fault systems are identified: E–W trending, N–E trending, and N–W trending, of which the E–W and N–E systems dominate the regional tectonic framework and hydrocarbon distribution. Faults preferentially occur along boundaries of secondary structural units and exhibit pronounced multi-stage activity. Integrated fault–stratigraphic relationships, deformation of seismic reflectors, and restoration results indicate five principal activity episodes: Tongwan, Caledonian–Middle Hercynian, Late Hercynian, Indosinian, and Yanshanian, each characterized by distinct intensity, scale, and spatial extent. We propose that establishment of the central Sichuan paleo–uplift prior to the Permian initiated the E–W trending strike–slip system, whereas a Late Hercynian tectonic regime shift—followed by Indosinian foreland overprinting associated with the Longmen Shan—promoted widespread development and reactivation of N–E trending faults, which became dominant. These findings provide a structural basis for deep gas exploration in the Sinian–Cambrian Anyue giant gas field and the Permian Qixia–Maokou reservoirs, and offer insights into strike–slip faulting and hydrocarbon controls within stable cratonic basins.
- 24 June 2026
- Published by MDPI AG in Geosciences
- Vol. 16 (7) , 247
Open AccessMulti-Stage Tectonic Superposition and the Evolution of Strike–Slip Faults in the Central Sichuan Basin of China
In recent years, laterally extensive strike–slip faults with relatively small displacement have been recognized in the central Sichuan Basin during deep hydrocarbon exploration. These faults segment the structural framework and provide key conduits for fluid migration and pathways for reservoir reworking, thereby exerting first-order control on hydrocarbon migration and accumulation. To characterize their geometry, kinematics, multi-stage evolution, and genetic mechanisms—and to address structural uncertainties limiting deep exploration—we integrate newly processed high-resolution 3D seismic data covering ~22,000 km2 with drilling data from 28 drillings that penetrate the Sinian Dengying Formation in the central and western Sichuan Basin. Using coherence–attribute imaging and detailed fault interpretation, we examine the coupling between tectonic superposition and strike–slip fault development. Three fault systems are identified: E–W trending, N–E trending, and N–W trending, of which the E–W and N–E systems dominate the regional tectonic framework and hydrocarbon distribution. Faults preferentially occur along boundaries of secondary structural units and exhibit pronounced multi-stage activity. Integrated fault–stratigraphic relationships, deformation of seismic reflectors, and restoration results indicate five principal activity episodes: Tongwan, Caledonian–Middle Hercynian, Late Hercynian, Indosinian, and Yanshanian, each characterized by distinct intensity, scale, and spatial extent. We propose that establishment of the central Sichuan paleo–uplift prior to the Permian initiated the E–W trending strike–slip system, whereas a Late Hercynian tectonic regime shift—followed by Indosinian foreland overprinting associated with the Longmen Shan—promoted widespread development and reactivation of N–E trending faults, which became dominant. These findings provide a structural basis for deep gas exploration in the Sinian–Cambrian Anyue giant gas field and the Permian Qixia–Maokou reservoirs, and offer insights into strike–slip faulting and hydrocarbon controls within stable cratonic basins.
- Open Access
Stages and Evolution of Strike-Slip Faults of the Ultra-Deep-Burial Ordovician Strata in Fuman Oilfield, Tarim Basin: Evidence from U-Pb Geochronology of Siliceous Minerals
Siliceous minerals with the property of resistance to diagenetic alteration precipitate during the migration of hydrothermal fluids through strike-slip faults and the interaction of these fluids with host rocks during fault activity. Based on petrological analyses and U-Pb dating of siliceous minerals, the stages of strike-slip faulting of the ultra-deep-burial Ordovician in the Fuman oilfield were subdivided and their evolutionary process was discussed in combination with seismic interpretation. The results reveal the following: (1) the strike-slip faults contain hydrothermal siliceous minerals, including cryptocrystalline silica, crystalline silica, and radial silica. (2) Based on the twelve U-Pb ages of siliceous minerals (ranging from 458 ± 78 Ma to 174 ± 35 Ma) and five U-Pb ages of calcite, the activity of the strike-slip faults was divided into six stages: the Middle Caledonian, Late Caledonian, Early Hercynian, Middle Hercynian, Late Hercynian, and Yanshanian, corresponding to twelve siliceous U-Pb ages ranging from 458 ± 78 Ma to 174 ± 35 Ma, and five calcitic U-Pb ages. The Late Caledonian and Early Hercynian were the main periods of strike-slip fault activity, while the Late Hercynian period marked the final period of the fault system. (3) Later-stage faults inherited and developed from pre-existing faults. Steep linear strike-slip faults formed during the Middle and Late Caledonian movements. During the Late Hercynian and Yanshanian movements, mid-shallow faults, branch faults, and shallow echelon faults developed on the foundation of these linear faults. The methods and results of this study can guide future hydrocarbon exploration in the Fuman oilfield and can be applied to areas with similar tectonic backgrounds.
Open AccessStages and Evolution of Strike-Slip Faults of the Ultra-Deep-Burial Ordovician Strata in Fuman Oilfield, Tarim Basin: Evidence from U-Pb Geochronology of Siliceous Minerals
Siliceous minerals with the property of resistance to diagenetic alteration precipitate during the migration of hydrothermal fluids through strike-slip faults and the interaction of these fluids with host rocks during fault activity. Based on petrological analyses and U-Pb dating of siliceous minerals, the stages of strike-slip faulting of the ultra-deep-burial Ordovician in the Fuman oilfield were subdivided and their evolutionary process was discussed in combination with seismic interpretation. The results reveal the following: (1) the strike-slip faults contain hydrothermal siliceous minerals, including cryptocrystalline silica, crystalline silica, and radial silica. (2) Based on the twelve U-Pb ages of siliceous minerals (ranging from 458 ± 78 Ma to 174 ± 35 Ma) and five U-Pb ages of calcite, the activity of the strike-slip faults was divided into six stages: the Middle Caledonian, Late Caledonian, Early Hercynian, Middle Hercynian, Late Hercynian, and Yanshanian, corresponding to twelve siliceous U-Pb ages ranging from 458 ± 78 Ma to 174 ± 35 Ma, and five calcitic U-Pb ages. The Late Caledonian and Early Hercynian were the main periods of strike-slip fault activity, while the Late Hercynian period marked the final period of the fault system. (3) Later-stage faults inherited and developed from pre-existing faults. Steep linear strike-slip faults formed during the Middle and Late Caledonian movements. During the Late Hercynian and Yanshanian movements, mid-shallow faults, branch faults, and shallow echelon faults developed on the foundation of these linear faults. The methods and results of this study can guide future hydrocarbon exploration in the Fuman oilfield and can be applied to areas with similar tectonic backgrounds.
- Open Access
- 12 July 2021
- Published by GeoScienceWorld in Lithosphere
- Vol. 2021 (Special 1)
New Method for Characterizing Internal Structure of Fault-Karst Reservoirs and Analysis on Acidizing Fracturing Effect: A Case Study in HLHT Oilfield, Tarim Basin, NW China
Superimposed tectonic movement and karst erosion resulted in a combination of fractures and irregular caves in deep/ultradeep carbonate rocks, typically along major fault swarms. Outlining these fault-karst reservoirs mainly depends on recognizing the strong reflection in seismic profiles; however, characterizing their internal structures is still difficult, which are represented as weak amplitude in seismic profiles. This study intended to propose a method to dissect the internal structure of fault-karst reservoirs, which contains four steps: (1) elimination of the signal interference by the covering bed with strong energy and recognition of internal reservoirs with low energy based on seismic data conversion, frequency division, and inversion; (2) gradient structure tensor analysis based on an anisotropic Gaussian filter for fault-karst reservoir outlining; (3) internal faults and cave recognition on the basis of wave-based inversion; and (4) reevaluation of the number and scale of these faults and caves based on seismic recognition and well test results and verification of their volumes and hydrocarbon reserves. The method was used in the evaluation of the fault-karst reservoir in the Halahatang (HLHT) oilfield, which is located in the north of Tarim Basin. The results show that the fault-karst reservoirs along major faults and their internal structures are effectively recognized, and the error of the predicted depth of the reservoirs decreases from more than 20 m before to less than 4 m now; the drilling success ratio increases from 70% to 90%. In addition, the method supports the recognition of untapped fault-karst reservoirs around shut-in wells, which provides guidance for sidetracking plans. Further, by comparing the geophysical volume of fault-karst reservoirs and the reserve predicted by production performance, the untapped reserve in a certain reservoir can be evaluated; on this basis, producing wells received high yields by targeted acid fracturing. In summary, the method effectively improves the prediction accuracy and the recovery efficiency of fault-karst reservoirs.
- 12 July 2021
- Published by GeoScienceWorld in Lithosphere
- Vol. 2021 (Special 1)
Open AccessNew Method for Characterizing Internal Structure of Fault-Karst Reservoirs and Analysis on Acidizing Fracturing Effect: A Case Study in HLHT Oilfield, Tarim Basin, NW China
Superimposed tectonic movement and karst erosion resulted in a combination of fractures and irregular caves in deep/ultradeep carbonate rocks, typically along major fault swarms. Outlining these fault-karst reservoirs mainly depends on recognizing the strong reflection in seismic profiles; however, characterizing their internal structures is still difficult, which are represented as weak amplitude in seismic profiles. This study intended to propose a method to dissect the internal structure of fault-karst reservoirs, which contains four steps: (1) elimination of the signal interference by the covering bed with strong energy and recognition of internal reservoirs with low energy based on seismic data conversion, frequency division, and inversion; (2) gradient structure tensor analysis based on an anisotropic Gaussian filter for fault-karst reservoir outlining; (3) internal faults and cave recognition on the basis of wave-based inversion; and (4) reevaluation of the number and scale of these faults and caves based on seismic recognition and well test results and verification of their volumes and hydrocarbon reserves. The method was used in the evaluation of the fault-karst reservoir in the Halahatang (HLHT) oilfield, which is located in the north of Tarim Basin. The results show that the fault-karst reservoirs along major faults and their internal structures are effectively recognized, and the error of the predicted depth of the reservoirs decreases from more than 20 m before to less than 4 m now; the drilling success ratio increases from 70% to 90%. In addition, the method supports the recognition of untapped fault-karst reservoirs around shut-in wells, which provides guidance for sidetracking plans. Further, by comparing the geophysical volume of fault-karst reservoirs and the reserve predicted by production performance, the untapped reserve in a certain reservoir can be evaluated; on this basis, producing wells received high yields by targeted acid fracturing. In summary, the method effectively improves the prediction accuracy and the recovery efficiency of fault-karst reservoirs.