FBFábio Luiz Camargo Villela Berbert

Fábio Luiz Camargo Villela Berbert

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fábio Luiz Camargo Villela Berbert has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Interleukin-6, tumor necrosis factor-α, and CD5 immunolabeling of new experimental endodontic sealer and repair material

    by Francine Benetti, Luciana Louzada Ferreira, Alexandre Henrique Dos Reis-Prado, Flávio Duarte Faria, Edilson Ervolino, Fabio Luiz Camargo Vellela Berbert, Renato de Toledo Leonardo, João Dias, João Eduardo Gomes-Filho, Luciano Tavares Angelo Cintra

    The aim of this study was to evaluate the biocompatibility and immunoinflammatory response of the Sealepox and Sealepox-RP, based on interleukin (IL)-6, tumor necrosis factor (TNF)-α, and CD5 immunolabelling. The ProRoot MTA (PRMTA) was used for comparison. Polyethylene tubes (1.0-mm internal, 1.6-mm external diameter, and 10.0-mm length; ISO 10993) with or without (control) materials were randomly implanted in the dorsum of 35 rats (4 per rat). After 7, 15, 30, 60, and 90 days (n = 7), the tubes were removed for histological and immunohistochemical analysis. The Kruskal–Wallis and Dunn’s test for non-parametric data and, ANOVA and Tukey test for parametric data were used (P < 0.05). Hematoxylin and eosin staining revealed that the concentration of inflammatory cells decreased over time with no differences between groups in all periods (P > 0.05). Regarding IL-6 immunostaining, there was no difference at 7 days (P > 0.05); all groups decreased over time, being faster for the PRMTA group and also, with no differences between groups in the last period (P > 0.05). For TNF-α, at 7 days there was no difference between groups (P > 0.05); there was an increase at 15 days for PRMTA and, at 30 and 60 days, for PRMTA and Sealepox compared to the control (P < 0.05). At 90 days, Sealepox RP showed the lowest immunostaining being similar to the control (P > 0.05). Regarding CD5 cells, at 7 days, there was high immunostaining for PRMTA compared to the control (P < 0.05); and significant reduction over time with difference for all groups at 30 and 60 days. (P < 0.05); Sealepox was similar to the control in all periods (P > 0.05). Sealepox RP showed the highest immunostaining at 15 days, being different from the control and PRMTA (P < 0.05); in the other periods it was similar to the control (P > 0.05). It can be concluded that Sealepox and Sealepox-RP were biocompatible and demonstrated similar immunoinflammatory response regarding IL-6, TNF-α, and CD5 compared to PRMTA.


  • Two diode lasers versus ultrasonic activation of EDTA: push-out analysis and penetrability by confocal analysis

    by Jéssica Arielli Pradelli, Milton Carlos Kuga, Fábio Luiz Camargo Vilella Berbert


  • Effects on Bone Tissue After Osteotomy with Different High-Energy Lasers: An Ex Vivo Study

    by Guilherme José Pimentel Lopes de Oliveira, Conrado Nogueira Campelo Rodrigues, Lívia Rodrigues Perussi, Alessandra Nara de Souza Rastelli, Rosemary Adriana Chiérici Marcantonio, Fábio Luiz Camargo Villela Berbert

    Objective: The purpose of this study was to evaluate the application of Er:YAG and Er,Cr:YSGG lasers during osteotomy in bovine bone blocks. Background data: Er:YAG/Er,Cr:YSGG lasers for osteotomy procedures have been used to induce tissue ablation without thermal damage. However, even these lasers can induce thermal damages, which can cause a delay on the bone healing. Materials and methods: Sixty standardized bovine bone mandible samples were divided into three groups with 20 samples each: Group 1, Bur; Group 2, Er:YAG laser; and Group 3, Er,Cr:YSGG laser. Two irradiations/cuts were made in each sample. The first was performed until the sample was completely separated into two fragments, and the time required for this procedure was recorded in seconds. The second irradiation/cut was made the same way as the first one; however, it was made partially, without separating the sample into two fragments, but rather making sulci ∼1.5–2 mm deep. Ten samples in each group were used to evaluate the surface morphology of the osteotomy by scanning electron microscopy (SEM), while the other 10 samples were submitted to descriptive histological analysis. Results: The bur was the instrument that performed the osteotomy in the shortest amount of time ( p < 0.05). All the instruments caused thermal damage; however, the Er,Cr:YSGG laser was the only type that induced carbonization. Conclusions: The Er:YAG laser induced the lowest degree of thermal damage in bone tissue after osteotomy; however, a shorter clinical time was required to perform the osteotomy in the bur group.


  • Open Access

    Solubility and bacterial sealing ability of MTA and root-end filling materials

    by Camila Galletti Espir, Juliane Maria Guerreiro-Tanomaru, Rubens Spin-Neto, Gisselle Moraima Chávez-Andrade, Fabio Luiz Camargo Villela Berbert, Mario Tanomaru-Filho

    Objective To evaluate solubility and sealing ability of Mineral Trioxide Aggregate (MTA) and root-end filling materials. Material and Methods The materials evaluated were: MTA, Calcium Silicate Cement with zirconium oxide (CSC/ZrO2), and zinc oxide/eugenol (ZOE). Solubility test was performed according to ANSI/ADA. The difference between initial and final mass of the materials was analyzed after immersion in distilled water for 7 and 30 days. Retrograde cavities in human teeth with single straight root canal were performed by using ultrasonic tip CVD 9.5107-8. The cavities were filled with the evaluated materials to evaluate sealing ability using the bacterial leakage test with Enterococcus faecalis. Bacterial leakage was evaluated every 24 hours for six weeks observing the turbidity of Brain Heart infusion (BHI) medium in contact with root apex. Data were submitted to ANOVA followed by Tukey tests (solubility), and Kruskal-Wallis and Dunn tests (sealing ability) at a 5% significance level. Results For the 7-day period, ZOE presented highest solubility when compared with the other groups (p<0.05). For the 30-day period, no difference was observed among the materials. Lower bacterial leakage was observed for MTA and CSC/ZrO2, and both presented better results than ZOE (p<0.05). Conclusion MTA and CSC/ZrO2 presented better bacterial sealing capacity, which may be related to lower initial solubility observed for these materials in relation to ZOE.


  • Physicochemical properties of calcium silicate cements associated with microparticulate and nanoparticulate radiopacifiers

    by Roberta Bosso-Martelo, Juliane M. Guerreiro-Tanomaru, Raqueli Viapiana, Fabio Luiz C. Berbert, Marco Antonio Hungaro Duarte, Mário Tanomaru-Filho

    The objective of this paper was to evaluate the physicochemical properties of calcium silicate cements with different chemical compositions, associated with radiopacifying agents. Mineral trioxide aggregate (MTA) Angelus, calcium silicate cement with additives (CSC), and resinous calcium silicate cement (CSCR) were evaluated, with the addition of the following radiopacifiers: microparticles (micro) or nanoparticles (nano) of zirconium oxide (ZrO2), niobium oxide (Nb2O5), bismuth oxide (Bi2O3), or calcium tungstate (CaWO4). Setting time was evaluated using Gilmore needles. Solubility was determined after immersion in water. The pH and calcium ion release were analyzed after 3, 12, and 24 h and 7, 14, and 21 days. The data obtained were submitted to analysis of variance and Tukey’s test, at a level of significance of 5 %. CSC + CaWO4 and CSCR + ZrO2 micro, Nb2O5 and CaWO4 presented results similar to MTA, with a shorter final setting time than the other associations. CSC and CSCR+ ZrO2 micro presented a higher degree of flow. All the cements evaluated presented low solubility. The materials presented alkaline pH and released calcium ions. ZrO2 micro radiopacifier may be considered a potential substitute for Bi2O3 when associated with CSC or CSCR. The proposed materials, especially when associated with ZrO2, are potential materials for use as alternatives to MTA.


  • Open Access

    Influence of addition of calcium oxide on physicochemical properties of Portland cement with zirconium or niobium oxide

    by Mario Tanomaru-Filho, José Mauricio Santos Nunes Reis, André Cresto Garcia, Roberta Bosso-Martelo, Fabio Luis Camargo V Berbert, Juliane Maria Guerreiro-Tanomaru

    Context: Calcium oxide (CaO) may be added to mineral trioxide aggregate (MTA) or Portland cement (PC) to improve physicochemical and biological properties. Aims: To evaluate the physicochemical properties of PC associated with radiopacifiers and CaO. Materials and Methods: MTA Angelus, PC + 30% zirconium oxide (Zr), or 30% niobium oxide (Nb) associated with 10 or 20% of CaO were evaluated. Gilmore needles were used to evaluate initial and final setting time. Compressive strength was evaluated after the periods of 24 hours and 21 days. pH was analyzed after 3, 12, 24 hours, 7, 14, 21 days. Solubility and flow tests were performed based on the ISO 6876. The data obtained were submitted to analysis of variance and Tukey tests (P ≤ 0.05). Results: The associations with 10% CaO showed greater strength that the associations with 20% CaO. The shortest initial setting time was observed for the association PC + Zr + 20% CaO and MTA. All the cements presented alkaline pH. The flow of all cements was similar. The highest solubility was found in the associations with 20% CaO. Conclusion: The addition of CaO to PC favored the alkaline property and the PC + Zr + 20% CaO presented setting time similar to MTA.


  • Photodynamic therapy in root canals contaminated with Enterococcus faecalis using curcumin as photosensitizer

    by Matheus Franco da Frota, Juliane Maria Guerreiro-Tanomaru, Mario Tanomaru-Filho, Vanderlei Salvador Bagnato, Camila Galetti Espir, Fabio Luis Camargo Villela Berbert

    The aim of the study was to evaluate the photodynamic therapy (PDT) effect on root canals contaminated with Enterococcus faecalis using a light emitting diode (LED) light and a curcumin solution (CUR) as photosensitizer (PS). Eighty root canals from uniradicular human teeth were prepared with Protaper Universal rotary system and contaminated with E. faecalis for 21 days. They were divided as: GIa-PDT (CUR, pre-irradiation for 5 + 5 min of irradiation); GIb-PDT (CUR, pre-irradiation for 5 + 10 min of irradiation); GIIa-(CUR, pre-irradiation for 5 + 5 min without irradiation); GIIb-(CUR pre-irradiation for 5 + 10 min of irradiation); GIIIa-(physiological solution and irradiation for 5 min); and GIIIb-(physiological solution and irradiation for 10 min); positive and negative control groups. Collections from root canals were made at time intervals of 21 days after contamination, immediately after treatment, and 7 days after treatment, and submitted to colony forming units per milliter (CFU mL−1) counts. The data were submitted to ANOVA and Tukey multiple comparison tests, at a level of significance of 5 %. In the immediate post-treatment collection, group GIa showed greater bacterial reduction in comparison with GIIa, GIIb, GIIIa, GIIIb, and positive control (P < 0.05). At 7 days post-treatment, GIa showed significant bacterial reduction only in comparison with GIIIa (P < 0.05). Curcumin as sensitizer was effective by 5 min LED irradiation but not by 10 min irradiation PDT using LED light, and curcumin as PS was not effective in eliminating E. faecalis. No difference was observed for periods of irradiation.


  • Antibiofilm activity, pH and solubility of endodontic sealers

    by N. B. Faria‐Júnior, M. Tanomaru‐Filho, F. L. C. V. Berbert, J. M. Guerreiro‐Tanomaru

    Aim: To evaluate antibiofilm activity against Enterococcus faecalis, pH and solubility of AH Plus, Sealer 26, Epiphany SE, Sealapex, Activ GP, MTA Fillapex (MTA‐F) and an experimental MTA‐based Sealer (MTA‐S).Methodology: Sealer samples were manipulated and stored for 2 or 7 days. Prepared sealers were evaluated by a modified direct contact test (DCT) for 5 h, 10 h or 15 h with biofilm previously induced on bovine dentine for 14 days. In the control group, the biofilm was not exposed to the sealers. The number of colony‐forming units (CFU mL−1) in the remaining biofilm was determined. Sealer solubility was assessed by the percentage of mass loss after 15 h of immersion in distilled water. Sealer pH was measured at 5 h, 10 h and 15 h. Statistical analysis was performed using Kruskal–Wallis and Dunn or anova and Tamhane's T2 tests, at 5% significance.Results: At 2 days post‐manipulation, the DCT showed that Sealapex and MTA‐F were associated with a reduction in the number of bacteria in all 3 contact periods evaluated, compared with the control group (P < 0.05). At 7 days, Sealapex had the greatest antibiofilm action at 10 h and 15 h. Sealapex had the highest pH values 2 and 7 days post‐manipulation. Regarding the solubility, at 2 days the highest values were observed for MTA‐F, MTA‐S, Sealapex and Activ GP (P < 0.05). At 7 days, MTA‐S and MTA‐F had greater solubility than the other materials (P < 0.05). AH Plus had the lowest solubility for both post‐manipulation periods (P < 0.05).Conclusion: Sealapex and MTA‐F were associated with a reduction in the number of bacteria in biofilms and had greater solubility. The high solubility and pH may be related to the antibacterial activity of these materials.


  • Open Access

    Cleaning capacity promoted by motor-driven or manual instrumentation using ProTaper Universal system: Histological analysis

    by Lucas da Fonseca Roberti Garcia, Matheus Franco da Frota, Idomeo Bonetti Filho, Fábio LuizCamargo Villela Berbert, Emilio Carlos Sponchiado, André AugustoFranco Marques

    Aim: The aim of this study was to assess the cleaning capacity of the Protaper system using motor-driven or manual instrumentation. Materials and Methods: Ten mandibular molars were randomly separated into 2 groups (n = 5) according to the type of instrumentation performed, as follows: Group 1 - instrumentation with rotary nickel-titanium (Ni-Ti) files using ProTaper Universal System (Dentsply/Maillefer); and, Group 2 - instrumentation with Ni-Ti hand files using ProTaper Universal (Dentsply-Maillefer). Afterwards, the teeth were sectioned transversely and submitted to histotechnical processing to obtain histological sections for microscopic evaluation. The images were analyzed by the Corel Photo-Paint X5 program (Corel Corporation) using an integration grid superimposed on the image. Results: Statistical analysis (U-Mann-Whitney - P < 0.05) demonstrated that G1 presented higher cleaning capacity when compared to G2. Conclusions: The rotary technique presented better cleaning results in the apical third of the root canal system when compared to the manual technique.


  • Persistence of Epoxy‐Based Sealer Residues in Dentin Treated With Different Chemical Removal Protocols

    by Milton Carlos Kuga, Gisele Faria, Marcos Antonio Rossi, Jardel Camilo Do Carmo Monteiro, Idomeo Bonetti‐Filho, Fábio Luiz Camargo Vilella Berbert, Kátia Cristina Keine, Marcus Vinicius Reis Só

    Summary: The presence of residual endodontic sealer in the pulp chamber may cause discoloration of the dental crown and interfere with the adhesion of restorative materials. The aim of this study was to compare the efficacy of different solvents in removing residues of an epoxy resin‐based sealer (AH Plus) from the dentin walls of the pulp chamber, by scanning electron microscopy (SEM). Forty‐four bovine incisor dental crown fragments were treated with 17% EDTA and 2.5% NaOCl. Specimens received a coating of AH Plus and were left undisturbed for 5 min. Then, specimens were divided in four groups (n = 10) and cleaned with one of the following solutions: isopropyl alcohol, 95% ethanol, acetone solution, or amyl acetate solution. Negative controls (n = 2) did not receive AH Plus, while in positive controls (n = 2) the sealer was not removed. AH Plus removal was evaluated by SEM, and a score system was applied. Data were analyzed by Kruskal–Wallis and Dunn tests. None of the solutions tested was able to completely remove AH Plus from the dentin of the pulp chamber. Amyl acetate performed better than 95% ethanol and isopropyl alcohol (p < 0.05), but not better than acetone (p > 0.05) in removing the sealer from dentin. No significant differences were observed between acetone, 95% ethanol, and isopropyl alcohol (p > 0.05). It was concluded that amyl acetate and acetone may be good options for cleaning the pulp chamber after obturation with AH Plus. SCANNING 35:17‐21, 2013.