VPVladyslav Polyvoda

Vladyslav Polyvoda

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Vladyslav Polyvoda has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of the implementation of modern technologies to increase the efficiency of ship electric power systems

    by V.V. Polyvoda, S. Samoilov

    The work focused on research of current technologies for optimizing shipboard electrical power systems. It examined the challenges and factors driving progress in this field, such as the negative impact of the maritime industry on the environment and the constant growth of competition. Examples of the most effective technological advances are provided, including LED-based lighting systems, energy-efficient electric motors, variable frequency drives, and hybrid power sources. The strategies aimed at promoting rational and conscious energy consumption, with the effective management of energy storage systems are analysed. Significant attention is dedicated to the integration of alternative energy sources, such as solar and wind power and their potential to contribute to the decarbonization of shipping and reduce dependence on traditional fuels. Hybrid propulsion systems, waste heat recovery systems and advanced energy management are explored as comprehensive and integrated approaches to optimizing energy consumption on vessels. The rapid development of energy storage solutions, such as lithium-ion batteries, is noted, which are very important in ensuring the efficient and reliable operation of hybrid and fully electric ships. The article provides a comparative analysis of the considered optimization approaches based on key criteria, such as fuel economy, emission reduction level, overall reliability and economic feasibility of implementation. In addition, the article illustrates the successful application of these optimization strategies on different types of ships, ranging from small ferries to large container ships and cruise liners. A separate section presents an overview of the latest scientific research and publications in this field and future trends and development directions in ship power system optimization including the growing role of digitalization, automation, the use of artificial intelligence, the adoption of alternative fuels

  • Open Access

    Design of distributed automated ship’s control systems based on OPC UA technology

    by V.V. Polyvoda, O.V. Polyvoda

    The OPC Unified Architecture (OPC UA) is a platform-independent, secure, and scalable communication protocol for industrial automation and control systems. It provides a standardized way for devices from different manufacturers to communicate and exchange data, regardless of their underlying technology or operating system. This interoperability enables the seamless integration of various components within a distributed automated control system (DACS), leading to improved efficiency, reliability, and flexibility. In the maritime industry, the adoption of OPC UA technology has the potential to revolutionize the design and operation of ships. By implementing OPC UA, shipyards and ship owners can achieve greater control over their vessels, optimize operations, and reduce maintenance costs. OPC UA can be used to connect a wide range of devices and systems on a ship, including sensors, actuators, controllers, and human-machine interfaces (HMIs). This enables the collection and analysis of real-time data from various sources, providing valuable insights into the ship's performance and health. One of the key benefits of using OPC UA in the design of DACS is its ability to facilitate remote monitoring and control. By integrating OPC UA with cloud-based technologies, ship operators can access and manage their vessels from anywhere in the world. This allows for proactive maintenance, timely troubleshooting, and remote diagnostics, reducing downtime and increasing operational efficiency. Another significant advantage of OPC UA is its support for information modelling. This allows for the creation of standardized data models that can be used to describe the physical components and processes on a ship. By using these models, engineers can design and implement DACS more efficiently, reducing the risk of errors and inconsistencies

  • Open Access

    Automation of vessel slamming avoidance processes

    by M. Khlopenko, V. Polyvoda, О.в. Шарко, D. Onyshko, M.я. Хлопенко, Д.м. Онишко

    The object of the research is the processes of slamming automatic avoidance when the vessel is sailing in a storm. During stormy sailing, the vessel is subjected to external influences from wind and waves, which lead to strong dynamic loads on the hull, increase in heel and trim angles, flooding of the deck. The vessel's speed decreases, its controllability deteriorates. Slamming is one of the most dangerous phenomena in storm sailing. The appearance of slamming depends on many factors: the size and shape of the vessel's hull, the draft of the bow, the state of the sea, the vessel's course and speed. Slamming is characterized by impacts of the bow and the bottom of the vessel's hull against the water when moving towards waves, the length of which is approximately equal to the length of the vessel. Impacts are accompanied by body shaking, due to a sharp increase in the load on the bottom, and a slowly fading vibration. Hydrodynamic shocks on the bottom and general vibration are the reasons for the violation of the local and general strength of the hull. Slamming and other dangers of stormy sailing are the cause of strong psycho-emotional stress of boatmen, contribute to the accumulation of fatigue, which is a prerequisite for accidents. In the article, a method of automatic control of the vessel to prevent slamming was developed. The obtained results are explained by the use of an on-board computer, the construction of a dangerous area of slamming in on-board computer, the use of a gradient method of finding the optimal trajectory in time of the phase point output from the dangerous area, and the maintenance of the optimal trajectory by means of an automatic control system. The use of the developed method allows you to automatically avoid slamming, reduce the influence of the human factor on control processes, reduce crew fatigue, reduce the risks of losing the ship and cargo, and increase the safety of navigation. The developed method can be used on vessels, provided it is integrated into the existing automated system of the on-board computer to solve the problem of automatic avoidance of slamming during stormy sailing

  • Open Access

    Analysis of the current state of ship monitoring systems and ways to their improving

    by S.V. Bigun, A.L. Simanenkov, A.A. Ivanov, D.V. Gytnyk, V.V. Polyvoda

    This article provides a comprehensive review of the K-Chief 600 system, yielding essential conclusions regarding its features. It shows next advantages: Time Savings and Efficiency, the K-Chief 600 system affords vessel operators real-time access to critical data and controls, leading to time savings and ensuring the vessel's efficient operation; User-Friendly Interface, the system's interface is designed for quick adaptation by operators, facilitating easy monitoring and control of various ship equipment aspects; Reporting and Analysis Capabilities, the system offers reporting and data analysis capabilities crucial for logging, equipment performance analysis, and maintenance planning; Flexibility and Expandability, its modular design renders the system flexible and expandable, enabling adaptation to specific vessel needs. Beside of pointed advantages, also disadvantages taking place, such an: High Costs and Installation, a major drawback may be the high cost of the K-Chief 600 system, potentially limiting its accessibility to certain operators; Need for Personnel Training, effective system utilization requires training for operators and vessel personnel, constituting a time-consuming and expensive process; Dependence on Electronic Systems, similar to any electronic system, there is a risk of failure or malfunctions, necessitating specific spare parts and technical support. In line with pointed advantages and disadvantages, there are some ways to improve such a systems: Increased Accessibility, developers could explore avenues to reduce the system's cost, making it more accessible to a broader range of operators; Increased Automation, expanding functionality for greater automation of control and monitoring processes can enhance shipping efficiency and safety; Reliability and Cybersecurity, continuously updating the system to enhance reliability and protect against cyber threats is a critical aspect of further improvement. In summary, the K-Chief 600 system proves to be a powerful tool for shipboard control and monitoring. However, cost considerations, personnel training, and safety concerns must be factored in for its effective use.

  • METHOD OF THE SHIP MAIN ENGINE CONDITION OPERATIONAL DIAGNOSTICS

    by Kherson National Technical University, O. V. Polyvoda, V. V. Polyvoda, Kherson State Maritime Academy, A. L. Simanenkov

  • Research of Acoustic Signals Digital Processing Methods Application Efficiency for the Electromechanical System Functional Diagnostics

    by Hanna Rudakova, Oksana Polyvoda, Inna Kondratieva, Vladyslav Polyvoda, Antonina Rudakova, Yuriy Rozov

  • Robust Recurrent Credibilistic Modification of the Gustafson - Kessel Algorithm

    by Yevgeniy Bodyanskiy, Alina Shafronenko, Iryna Klymova, Vladyslav Polyvoda


  • Using Entropy Estimation to Detect Moving Objects

    by I. U. Kondratieva, H. V. Rudakova, O. V. Polyvoda, Yu. O. Lebedenko, V. V. Polyvoda

    The article is devoted to the problems of analysis of the informative part of acoustic signals in the UAV control system. A method of determining the frequency range of the informative part of a signal based on the estimation of the normalized energy spectrum and spectral entropy is proposed. The sequence of steps for determining the range of the informative part of the signal, consisting of the calculation of the spectrum of the signal and the normalized energy spectrum, its digital processing, the calculation of the entropy of the spectrum, the median smoothing, logic-time processing. The results of experimental acoustic signal processing for different frame length values are analyzed. Graphic representations of the acoustic signal, spectral entropy values and logic function are given.


  • Monitoring Subsystem Design Method in the Information Control System

    by Oksana Polyvoda, Dmytro Lytvynchuk, Vladyslav Polyvoda