Mikhail Alexandrovich Markov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mikhail Alexandrovich Markov has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Alina Dmitrievna Bykova
NRC “Kurchatov Institute” – Central Research Institute of Structural Materials “Prometey”, Saint-Petersburg, Russia
19 shared publications A. V. Krasikov
National Research Center “Kurchatov Institute” – Central Research Institute of Structural Materials “Prometey”, St. Petersburg, Russia
10 shared publicationsA. N. Belyakov
National Research Center “Kurchatov Institute,” Gorynin Central Research Institute of Structural Materials “Prometey,”, St. Petersburg, Russia
8 shared publications- Igor Nikolaevich Kravchenko
Mechanical Engineering Research Institute of the Russian Academy of Sciences, Moscow, Russia
7 shared publications - Yuri Alekseevich Kuznetsov
Parakhin Orel State Agrarian University, Oryol, Russia
7 shared publications - Alexey Vladimirovich Krasikov
National Research Center “Kurchatov Institute” - Central Research Institute of Structural Materials “Prometey”, St. Petersburg, Russia
6 shared publications
Latest Publications
- 19 November 2025
- Published by Kola Science Centre in Transaction Kola Science Centre
- Vol. 16 (2) , 46-50
ADVANCED COMPOSITE MATERIAL DIAMOND-SILICON CARBIDE
This study presents ballistic test results for a diamond-silicon carbide composite synthesized via reactive sintering. Experimental armor panels—comprising a mosaic of ceramic tiles bonded to an ultra-high molecular weight polyethylene (UHMWPE) backing—were evaluated against Russian GOST Br4 and Br5 protection standards. Testing involved impacts from armor-piercing rounds including 7,62×54 mm (57-N-323S), 5,45×39 mm (7N24, 7N39), and SVD sniper rifle cartridges (7N13, 7-BZ-3) in 7,62×54 mm. Results demonstrate that Br4 compliance is achieved with 6-mm-thick tiles (areal density: 29,9 kg/m²), a benchmark unattainable with conventional ceramics; Br5 protection against SVD rounds (including armor-piercing incendiary types) requires 8-mm tiles.
- 19 November 2025
- Published by Kola Science Centre in Transaction Kola Science Centre
- Vol. 16 (2) , 46-50
ADVANCED COMPOSITE MATERIAL DIAMOND-SILICON CARBIDE
This study presents ballistic test results for a diamond-silicon carbide composite synthesized via reactive sintering. Experimental armor panels—comprising a mosaic of ceramic tiles bonded to an ultra-high molecular weight polyethylene (UHMWPE) backing—were evaluated against Russian GOST Br4 and Br5 protection standards. Testing involved impacts from armor-piercing rounds including 7,62×54 mm (57-N-323S), 5,45×39 mm (7N24, 7N39), and SVD sniper rifle cartridges (7N13, 7-BZ-3) in 7,62×54 mm. Results demonstrate that Br4 compliance is achieved with 6-mm-thick tiles (areal density: 29,9 kg/m²), a benchmark unattainable with conventional ceramics; Br5 protection against SVD rounds (including armor-piercing incendiary types) requires 8-mm tiles.
- 4 August 2025
- Published by Springer Nature in Metallurgist
- Vol. 69 (4) , 510-520
Investigation of aspects of compensation for thermal expansion of 3D gradient materials Al–Al2O3 using “cold” spraying technology
- 4 August 2025
- Published by Springer Nature in Metallurgist
- Vol. 69 (4) , 510-520
Investigation of aspects of compensation for thermal expansion of 3D gradient materials Al–Al2O3 using “cold” spraying technology
- 1 June 2024
- Published by Pleiades Publishing Ltd in Glass Physics and Chemistry
- Vol. 50 (3) , 260-269
Research on the Method of Obtaining Ceramics of Reaction-Sintered Materials Based on SiC–MoSi2 Using Analytical Approaches of Digital Materials Science
In this study, high-temperature composite materials based on reactively sintered silicon carbide modified with a molybdenum bond are obtained. The microstructure, phase composition, and physico-mechanical properties of the formed composites are determined. It is experimentally shown that molybdenum in the process of reaction sintering forms a stable MoSi2 phase with a silicon melt in the volume of the sintered ceramic material. It is shown that the numerical parameters of lacunarity and chaos allow us to evaluate the homogeneity of the material structure in a direct relationship with the variation of the technological modes of ceramic synthesis. The resulting composites are characterized by a density of about 3.02–3.16 g/cm3 and a bending strength of about 180–220 MPa.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Glass Physics and Chemistry
- Vol. 50 (3) , 260-269
Research on the Method of Obtaining Ceramics of Reaction-Sintered Materials Based on SiC–MoSi2 Using Analytical Approaches of Digital Materials Science
In this study, high-temperature composite materials based on reactively sintered silicon carbide modified with a molybdenum bond are obtained. The microstructure, phase composition, and physico-mechanical properties of the formed composites are determined. It is experimentally shown that molybdenum in the process of reaction sintering forms a stable MoSi2 phase with a silicon melt in the volume of the sintered ceramic material. It is shown that the numerical parameters of lacunarity and chaos allow us to evaluate the homogeneity of the material structure in a direct relationship with the variation of the technological modes of ceramic synthesis. The resulting composites are characterized by a density of about 3.02–3.16 g/cm3 and a bending strength of about 180–220 MPa.
- 11 December 2023
- Published by Springer Nature in Refractories and Industrial Ceramics
- Vol. 64 (2) , 1-5
Technological Features of the Synthesis of Heat-Resistant Ceramics in the NiO–YSZ System with the Possibility of Using Additive Technology
- 11 December 2023
- Published by Springer Nature in Refractories and Industrial Ceramics
- Vol. 64 (2) , 1-5
Technological Features of the Synthesis of Heat-Resistant Ceramics in the NiO–YSZ System with the Possibility of Using Additive Technology
- 24 August 2022
- Published by Allerton Press in Journal of Machinery Manufacture and Reliability
- Vol. 51 (4) , 300-305
Influence of Vibration Parameters during Electrodeposition of Ni–SiC Composite Coatings from a Vibration Stabilized Suspension
The influence of the vibration parameters on the electrodeposition of a Ni–SiC composite coating from a vibration-stabilized suspension has been stud
- 24 August 2022
- Published by Allerton Press in Journal of Machinery Manufacture and Reliability
- Vol. 51 (4) , 300-305
Influence of Vibration Parameters during Electrodeposition of Ni–SiC Composite Coatings from a Vibration Stabilized Suspension
The influence of the vibration parameters on the electrodeposition of a Ni–SiC composite coating from a vibration-stabilized suspension has been stud
- Open Access
The Use of Cold Spraying and Micro-Arc Oxidation Techniques for the Repairing and Wear Resistance Improvement of Motor Electric Bearing Shields
Reliability is one of the most important requirements for electric motor installations. Bearing assembly is a common source of failure for most electric motors. One of the main reasons for such failures is the wear of the bearing seat of the end shield. This paper presents a combined technology for increasing the durability of the bearing bores of electric motor bearing shields made of aluminum alloys. The technological concept is that a worn-out end-shield bore is firstly restored by supersonic gas-dynamic spraying, and secondly, in order to improve anti-wear properties, it is strengthened by micro-arc oxidation. The adhesion of coatings has been studied, and the wear resistance of the formed coatings has been evaluated. Based on the performed studies, it can be assumed that the service life of the bearing assembly of an electric motor restored by gas-dynamic spraying with the novel technology of micro-arc oxidation in real operating conditions will increase on average by 3–4 times. The developed technology is recommended for repair, maintenance, or other technical services dealing with the restoration and hardening of worn-out parts.
Open AccessThe Use of Cold Spraying and Micro-Arc Oxidation Techniques for the Repairing and Wear Resistance Improvement of Motor Electric Bearing Shields
Reliability is one of the most important requirements for electric motor installations. Bearing assembly is a common source of failure for most electric motors. One of the main reasons for such failures is the wear of the bearing seat of the end shield. This paper presents a combined technology for increasing the durability of the bearing bores of electric motor bearing shields made of aluminum alloys. The technological concept is that a worn-out end-shield bore is firstly restored by supersonic gas-dynamic spraying, and secondly, in order to improve anti-wear properties, it is strengthened by micro-arc oxidation. The adhesion of coatings has been studied, and the wear resistance of the formed coatings has been evaluated. Based on the performed studies, it can be assumed that the service life of the bearing assembly of an electric motor restored by gas-dynamic spraying with the novel technology of micro-arc oxidation in real operating conditions will increase on average by 3–4 times. The developed technology is recommended for repair, maintenance, or other technical services dealing with the restoration and hardening of worn-out parts.
- 1 January 2022
- Published by Tomsk State University in Vestnik Tomskogo Gosudarstvennogo Universiteta. Matematika i Mekhanika
- No. 76,p. 118-130
Study of the structure and properties of products made of heat-resistant alloys based on Ni-Cr-CrN with a high nitrogen content by direct metal laser sintering
This work presents a study of the preparation of additive materials based on a nickel-chromium alloy of the Ni-Cr-CrN system by direct metal laser sintering (DMLS). The additive materials were produced on the EOS M270 setup (with the option of open editing modes). The research range: laser radiation from 100 to 200 W, the speed of the laser beam from 600 to 1100 mm/s. The chemical composition of the obtained materials is investigated. The composition indicates a high final content of nitrogen in the alloy (0.5%). The structure of the obtained samples and their mechanical characteristics, namely, the bending strength (1500 MPa) and Vickers microhardness (450 HV), have been investigated. The morphology, microstructure, and elemental analysis of the initial powder and the resulting additive materials were studied by scanning electron microscopy and X-ray spectral microanalysis on the TESCAN Vega research complex. Analysis of the structure shows that the elements Ni, Cr and Fe are distributed evenly over the entire area of the samples, which indicates a uniform Ni-Cr-CrN melt. Contribution of the authors: the authors contributed equally to this article. The authors declare no conflicts of interests.
- 1 January 2022
- Published by Tomsk State University in Vestnik Tomskogo Gosudarstvennogo Universiteta. Matematika i Mekhanika
- No. 76,p. 118-130
Study of the structure and properties of products made of heat-resistant alloys based on Ni-Cr-CrN with a high nitrogen content by direct metal laser sintering
This work presents a study of the preparation of additive materials based on a nickel-chromium alloy of the Ni-Cr-CrN system by direct metal laser sintering (DMLS). The additive materials were produced on the EOS M270 setup (with the option of open editing modes). The research range: laser radiation from 100 to 200 W, the speed of the laser beam from 600 to 1100 mm/s. The chemical composition of the obtained materials is investigated. The composition indicates a high final content of nitrogen in the alloy (0.5%). The structure of the obtained samples and their mechanical characteristics, namely, the bending strength (1500 MPa) and Vickers microhardness (450 HV), have been investigated. The morphology, microstructure, and elemental analysis of the initial powder and the resulting additive materials were studied by scanning electron microscopy and X-ray spectral microanalysis on the TESCAN Vega research complex. Analysis of the structure shows that the elements Ni, Cr and Fe are distributed evenly over the entire area of the samples, which indicates a uniform Ni-Cr-CrN melt. Contribution of the authors: the authors contributed equally to this article. The authors declare no conflicts of interests.
- 1 January 2022
- Published by Springer Nature in Metallurgist
- Vol. 65 (9-10) , 1196
Correction to: Thickness Evaluation of Ceramic Coatings Formed by Microarc Oxidation
- 1 January 2022
- Published by Springer Nature in Metallurgist
- Vol. 65 (9-10) , 1196
Correction to: Thickness Evaluation of Ceramic Coatings Formed by Microarc Oxidation
- 17 December 2021
- Published by Pleiades Publishing Ltd in Biochemistry (Moscow)
- Vol. 86 (12-13) , 1503-1525
Coevolution of Brain, Culture, and Lifespan: Insights from Computer Simulations
Humans possess a number of traits that are rare or absent in other primates, including large brain size, culture, language, extended lifespan (LS), and long post-reproductive period. Here, we use a computer model, TribeSim, originally designed to explore the autocatalytic coevolution of the hominin brain and culture within the framework of the “cultural drive” theory, to find out how culture and brain could coevolve with LS (or aging rate). We show that in the absence of culture, the evolution of LS depends on the intensity of the between-group competition (BGC): strong BGC results in shorter LS. Culture, however, favors genetic evolution of longer LS even if the BGC is strong. Extended LS, in turn, enhances cultural development, thus creating positive feedback. Cultural evolution of LS (accumulation of survival-enhancing or survival-impairing knowledge) differs from the genetic evolution of the same trait, partially because “memes” (ideas, skills, and behaviors) that reduce the risk of death tend to spread in the meme pool even if it is not beneficial to genes. Consequently, cultural evolution of aging tends to result in longer LS than genetic evolution of the same trait. If LS evolves both genetically and culturally, the typical result is a society in which young individuals, due to their genetic predisposition, lead a riskier lifestyle in exchange for a chance to gain additional resources, but accumulate survival-enhancing knowledge with age. Simulations also showed that cultural evolution of adaptive behaviors can contribute to the genetic evolution of a long post-reproductive period, e.g., if the presence of knowledgeable long-livers increases the competitiveness of the group.
- 17 December 2021
- Published by Pleiades Publishing Ltd in Biochemistry (Moscow)
- Vol. 86 (12-13) , 1503-1525
Coevolution of Brain, Culture, and Lifespan: Insights from Computer Simulations
Humans possess a number of traits that are rare or absent in other primates, including large brain size, culture, language, extended lifespan (LS), and long post-reproductive period. Here, we use a computer model, TribeSim, originally designed to explore the autocatalytic coevolution of the hominin brain and culture within the framework of the “cultural drive” theory, to find out how culture and brain could coevolve with LS (or aging rate). We show that in the absence of culture, the evolution of LS depends on the intensity of the between-group competition (BGC): strong BGC results in shorter LS. Culture, however, favors genetic evolution of longer LS even if the BGC is strong. Extended LS, in turn, enhances cultural development, thus creating positive feedback. Cultural evolution of LS (accumulation of survival-enhancing or survival-impairing knowledge) differs from the genetic evolution of the same trait, partially because “memes” (ideas, skills, and behaviors) that reduce the risk of death tend to spread in the meme pool even if it is not beneficial to genes. Consequently, cultural evolution of aging tends to result in longer LS than genetic evolution of the same trait. If LS evolves both genetically and culturally, the typical result is a society in which young individuals, due to their genetic predisposition, lead a riskier lifestyle in exchange for a chance to gain additional resources, but accumulate survival-enhancing knowledge with age. Simulations also showed that cultural evolution of adaptive behaviors can contribute to the genetic evolution of a long post-reproductive period, e.g., if the presence of knowledgeable long-livers increases the competitiveness of the group.
- 16 November 2021
- Published by Springer Nature in Metallurgist
- Vol. 65 (7-8) , 893-903
Metallographic Studies into the Structure and Physicomechanical Properties of Coatings Obtained Using Plasma Methods
- 16 November 2021
- Published by Springer Nature in Metallurgist
- Vol. 65 (7-8) , 893-903
Metallographic Studies into the Structure and Physicomechanical Properties of Coatings Obtained Using Plasma Methods