RMRohith Srinivaas Mohanakrishnan

Rohith Srinivaas Mohanakrishnan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rohith Srinivaas Mohanakrishnan has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Understanding Charge Acceptance Limitations During Extreme Fast‐Charging of Li‐ion Batteries

    by Ning Guo, Joseph Park, Rohith Srinivaas Mohanakrishnan, Kristin A. Persson, Bryan D. McCloskey

    Extreme fast charging in lithium‐ion batteries is limited by their poor charge acceptance at high C‐rates. We use overpotential component analysis to decouple ohmic, kinetic and transport voltage losses during fast charging. The concentration gradients are identified as the primary culprit in poor charge acceptance, so we study carbonate electrolytes that utilize acetonitrile, a low viscosity, high dielectric liquid, as a co‐solvent to improve ion transport. Our results indicate acetonitrile co‐solvent successfully reduces fast charging concentration gradients and therefore improves charge acceptance at high C‐rates, particularly when used in combination with interface‐stabilizing additives. Molecular dynamics simulations show that ACN enhances Li + transport through a combination of reduced bulk viscosity and increased solvation‐shell lability, with shorter solvent residence times and faster coordination exchange producing transport gains beyond those expected from viscosity reduction alone. Finally, we use three‐electrode cells to deconvolute overpotential at each electrode, and the specific LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) electrode architecture and loading used in our study is found to have much higher overpotentials than our graphite electrode. In particular, the significant differences in NMC811 concentration gradients between electrolytes with or without acetonitrile indicate that the design of electrode architecture is crucial for extreme fast charging applications.

  • Open Access

    TorchFF: A high-performance GPU-accelerated differentiable force field library

    by Yingze Wang, Aalim S. Abdullah, Rohith Srinivaas Mohanakrishnan, Teresa Head-Gordon

    Molecular dynamics (MD) and the development of next-generation force fields increasingly rely on automatic differentiation for efficient simulated property prediction and parameter optimization. However, standard FFs and machine learning frameworks often suffer from significant performance bottlenecks—such as kernel launch overhead and memory bandwidth limitations—when executing the many-atom, small-kernel operations characteristic of MD simulations. Here, we present TorchFF, a high-performance, differentiable library that extends PyTorch with a suite of customized CUDA operators specifically engineered for molecular modeling. By implementing performance-critical routines—including bonded interactions, multipolar electrostatics, particle mesh Ewald, and neighbor list searches—as backend-optimized primitives, TorchFF bridges the gap between the flexible Python ecosystem and the execution speed of compiled MD engines.

  • Open Access

    Correlated Ion Transport Governed by Dynamic Local Structure in High Concentration and Localized High Concentration Electrolytes

    by Rohith Srinivaas Mohanakrishnan, Jingyang Wang, Joseph Park, Kristin A. Persson

    Understanding the dynamics of cluster formation and network percolation provides the mechanistic link between microscopic solvation structure and transport in concentrated electrolytes, including localized high-concentration electrolytes (LHCEs). Although recent studies have shown LHCEs to form micelle-like aggregates at specific compositions, a quantitative understanding of how solvation structures and transport properties depend on salt–solvent–diluent ratios remains limited. Here, we integrate molecular dynamics with Onsager transport analyses to chart the evolution of solvation microstructure and associated ionic transport in LiFSI/DMC/TTE, achieving good agreement with experimental conductivities across composition. We show that micelle formation arises from a dynamic instability of the cation–anion network, and that network percolation is the primary determinant of conductivity. Two compositional thresholds emerge: A critical network concentration (CNC) and a critical micelle concentration (CMC) that delineate transitions from extended percolating networks to micelle-like clusters and then to fragments. These structural transitions rationalize the nonintuitive conductivity decrease at intermediate dilution despite monotonically decreasing viscosity and provide composition-level design rules for LHCEs.

  • Open Access

    Co-solvent enhanced solvation shell lability improves ion transport in Li-ion battery electrolytes

    by Rohith Srinivaas Mohanakrishnan, Joseph Park, Ning Guo, Bryan D. McCloskey, Kristin A. Persson

    Electrolytes for extreme fast charging (XFC) of Li-ion batteries must combine high ionic conductivity with favorable Li + transference, yet these transport properties are difficult to improve simultaneously in practical carbonate-based liquids. Here, we investigate a 1.2 M LiPF 6 electrolyte series based on ethylene carbonate (EC), ethyl methyl carbonate (EMC), and acetonitrile (ACN), in which ACN progressively replaces EMC from 0 to 40 vol%. Experiment and molecular dynamics (MD) simulations show that increasing ACN content raises conductivity from ∼10 to 23 mS cm −1 , lowers viscosity from 3.5 to 2.2 cP, while MD further predicts a modest increase in the Li+ transference number from 0.37 to 0.42. These transport gains exceed what is expected from viscosity reduction alone: the conductivity–viscosity product increases monotonically, whereas ionicity and ion pair fractions change only weakly. At the molecular level, not only does ACN replace EMC in the Li + first solvation shell, it remarkably shortens the residence time of all solvation shell species, thereby increasing solvation shell lability. Onsager analysis shows that ACN enhances the transport of both Li + and PF − 6 while reducing persistent Li + –PF − 6 correlated motion over transport-relevant times. Solvent-resolved correlations and PF − 6 entry/exit analyses further show that ACN promotes faster solvent exchange during local ion-pair formation and relaxation, shifting transport away from a more vehicular regime and toward a more exchange-mediated one. These results identify dynamic solvent tuning as a transport design principle for XFC-relevant electrolytes.

  • Open Access

    Understanding charge acceptance limitations during extreme fast-charging of Li-ion batteries

    by Ning Guo, Joey Park, Rohith Srinivaas Mohanakrishnan, Kristin A. Persson, Bryan McCloskey

    Extreme fast charging in lithium-ion batteries is limited by their poor charge acceptance at high C-rates. In this work, we use overpotential component analysis to decouple ohmic, kinetic and transport related voltage losses during fast charging. The concentration gradients developed as a result of fast charging are identified as the primary culprit in poor charge acceptance, so we study carbonate electrolytes that utilize acetonitrile, a low viscosity, high dielectric liquid, as a co-solvent to improve ion transport. Our results indicate acetonitrile co-solvent successfully reduces fast charging concentration gradients and therefore improves charge acceptance at high C-rates, partially when used in combination with interface-stabilizing additives. Molecular dynamics simulations show that ACN enhances Li+ transport through a combination of reduced bulk viscosity and increased solvation-shell lability, with shorter solvent residence times and faster coordination exchange producing transport gains beyond those expected from viscosity reduction alone. Finally, we use three-electrode cells to deconvolute overpotential at each electrode, and the LiNi0.8Mn0.1Co0.1O2 (NMC811) electrode used in our study is found to have much higher overpotentials than our graphite electrode. In particular, the significant differences in NMC811 concentration gradients between electrolytes with or without acetonitrile indicate that the design of electrode architecture is crucial for extreme fast charging applications.

  • Open Access

    Co-solvent enhanced solvation shell lability improves ion transport in Li-ion battery electrolytes

    by Rohith Srinivaas Mohanakrishnan, Joseph Park, Ning Guo, Bryan D. McCloskey, Kristin A. Persson

    Electrolytes for extreme fast charging (XFC) of Li-ion batteries must combine high ionic conductivity with favorable Li+ transference, yet these transport properties are difficult to improve simultaneously in practical carbonate-based liquids. Here, we investigate a 1.2 M LiPF6 electrolyte series based on ethylene carbonate (EC), ethyl methyl carbonate (EMC), and acetonitrile (ACN), in which ACN progressively replaces EMC from 0 to 40 vol%. Experiment and molecular dynamics (MD) simulations show that increasing ACN content raises conductivity from ∼10 to 23 mS cm−1, lowers viscosity from 3.5 to 2.2 cP, while MD further predicts a modest increase in the Li+ transference number from 0.37 to 0.42. These transport gains exceed what is expected from viscosity reduction alone: the conductivity–viscosity product increases monotonically, whereas ionicity and ion pair fractions change only weakly. At the molecular level, not only does ACN replace EMC in the Li+ first solvation shell, it remarkably shortens the residence time of all solvation shell species, thereby increasing solvation shell lability. Onsager analysis shows that ACN enhances the transport of both Li+ and PF− 6 while reducing persistent Li+–PF− 6 correlated motion over transport-relevant times. Solvent-resolved correlations and PF− 6 entry/exit analyses further show that ACN promotes faster solvent exchange during local ion-pair formation and relaxation, shifting transport away from a more vehicular regime and toward a more exchange-mediated one. These results identify dynamic solvent tuning as a transport design principle for XFC-relevant electrolytes, showing that the experimental measurements of conductivity and cation transference can be improved without requiring a major change in ion association.


  • Open Access

    Understanding charge acceptance limitations during extreme fast-charging of Li-ion batteries

    by Ning Guo, Joey Park, Rohith Srinivaas Mohanakrishnan, Kristin A. Persson, Bryan McCloskey

    Extreme fast charging in lithium-ion batteries is limited by their poor charge acceptance at high C-rates. In this work, we use overpotential component analysis to decouple ohmic, kinetic and transport related voltage losses during fast charging. The concentration gradients developed as a result of fast charging are identified as the primary culprit in poor charge acceptance, so we study carbonate electrolytes that utilize acetonitrile, a low viscosity, high dielectric liquid, as a co-solvent to improve ion transport. Our results indicate acetonitrile co-solvent successfully reduces fast charging concentration gradients and therefore improves charge acceptance at high C-rates, partially when used in combination with interface-stabilizing additives. Molecular dynamics simulations show that ACN enhances Li+ transport through a combination of reduced bulk viscosity and increased solvation-shell lability, with shorter solvent residence times and faster coordination exchange producing transport gains beyond those expected from viscosity reduction alone. Finally, we use three-electrode cells to deconvolute overpotential at each electrode, and the LiNi0.8Mn0.1Co0.1O2 (NMC811) electrode used in our study is found to have much higher overpotentials than our graphite electrode. In particular, the significant differences in NMC811 concentration gradients between electrolytes with or without acetonitrile indicate that the design of electrode architecture is crucial for extreme fast charging applications.

  • Unraveling the Steric Effect of Trialkyl Phosphates on the Solvation Sheath and Solid Electrolyte Interphase in High-Efficiency Magnesium Electrolytes

    by Chang Li, Rohith Srinivaas Mohanakrishnan, Jinghan Li, Rishabh D. Guha, Kristin A. Persson, Linda F. Nazar

    Designing Mg-compatible and chloride-free electrolytes is important to achieving high-voltage and long-life Mg metal batteries. In electrolytes based on Mg(OTf)2/diglyme: triethyl phosphate that exhibit near 100% Coulombic efficiency for Mg plating/stripping at high current densities and capacities, the TXP (X = alkyl group) plays a key role. Herein, we unveil steric hindrance as the fundamental origin of this role in optimizing the Mg2+ solvation structure and forming electrolyte-derived solid electrolyte interphases. The steric hindrance was tuned by systematically changing the alkyl chain length of the phosphate (TXP) from one to five. Its impact on altering bulk electrolyte solvation and interfacial SEI chemistry was studied by combining both spectroscopy techniques and theoretical modeling methods. We demonstrate that low steric hindrance leads to easy decomposition of phosphate solvents, whereas high steric hindrance fails to interrupt Mg2+-triflate/diglyme interactions. TEP with medium hindrance shows optimized behavior in both scenarios, which is the origin of its superior electrochemical performance. Our finding provides a new solvent design principle at the molecular level for chloride-free Mg2+ electrolytes.


  • Reactivity of Cyclic and Linear Alkyl Carbonates with Reactive Oxygen Species

    by Bernardine L. D. Rinkel, Rohith Srinivaas Mohanakrishnan, Jaeheon Lee, Kristin A. Persson, Bryan D. McCloskey

    Electrolyte decomposition at the positive and negative electrodes remains a major challenge to improving lithium-ion battery lifetime. At the positive electrode, chemical oxidation of alkyl carbonate solvents by reactive lattice oxygen species (ROS) has emerged as a key degradation pathway, but the specific reactivity of different solvents toward various ROS and the underlying mechanisms remain unclear. Here, we examine the reactivity of four widely used alkyl carbonates (EC, DMC, EMC, and DEC) with singlet oxygen, peroxide, and superoxide. Gas evolution measurements were used to assess the extent of reactions, and mass spectrometry and NMR spectroscopy identified the resulting products to elucidate reaction pathways. EC was reactive toward all three ROS, with the highest reactivity for superoxide, followed by peroxide and singlet oxygen. Identified products enabled a proposed mechanism for EC oxidation, supported by DFT calculations. In contrast, the linear carbonates (DMC, EMC, and DEC) exhibited minimal reactivity under the same conditions, indicating greater resistance to ROS-induced oxidation. These findings suggest that reducing the EC content in electrolytes could mitigate degradation, particularly in next-generation cathodes with extensive oxygen redox that generate more ROS. This work provides mechanistic insight into solvent-ROS interactions and offers guidelines for designing more stable electrolytes for advanced lithium-ion batteries.


  • Open Access

    Disordered Rocksalts as High‐Energy and Earth‐Abundant Li‐Ion Cathodes

    by Han‐Ming Hau, Tucker Holstun, Eunryeol Lee, Bernardine L. D. Rinkel, Tara P. Mishra, Max Markuson DiPrince, Rohith Srinivaas Mohanakrishnan, Ethan C. Self, Kristin A. Persson, Bryan D. McCloskey, et al.

    To address the growing demand for energy and support the shift toward transportation electrification and intermittent renewable energy, there is an urgent need for low‐cost, energy‐dense electrical storage. Research on Li‐ion electrode materials has predominantly focused on ordered materials with well‐defined lithium diffusion channels, limiting cathode design to resource‐constrained Ni‐ and Co‐based oxides and lower‐energy polyanion compounds. Recently, disordered rocksalts with lithium excess (DRX) have demonstrated high capacity and energy density when lithium excess and/or local ordering allow statistical percolation of lithium sites through the structure. This cation disorder can be induced by high temperature synthesis or mechanochemical synthesis methods for a broad range of compositions. DRX oxides and oxyfluorides containing Earth‐abundant transition metals have been prepared using various synthesis routes, including solid‐state, molten‐salt, and sol‐gel reactions. This review outlines DRX design principles and explains the effect of synthesis conditions on cation disorder and short‐range cation ordering (SRO), which determines the cycling stability and rate capability. In addition, strategies to enhance Li transport and capacity retention with Mn‐rich DRX possessing partial spinel‐like ordering are discussed. Finally, the review considers the optimization of carbon and electrolyte in DRX materials and addresses key challenges and opportunities for commercializing DRX cathodes.