Min Hyok Jon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Min Hyok Jon has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Un-Ryong Rim
Kim Chaek University of Technology
3 shared publications - Chol Jun Pak
School of Economics and Management, Dalian University of Technology, Dalian, China
1 shared publication Chung Il Yu
Kim Chaek University of Technology
1 shared publication- Ho Rim Pae1 shared publication
Latest Publications
- Open Access
- 17 November 2024
- Published by Wiley in Engineering Reports
- Vol. 7 (1)
Kinematic Analysis and Optimization of Jerk Considering Elasticity of Weightlifting Bar and Damping Effect of Body in Clean and Jerk
The purpose of this study is kinematic analysis and optimization of jerk considering elasticity of the weightlifting bar and damping effect of the body. In order for weightlifters to achieve good technical skills in clean and jerk, the elasticity of weightlifting bar needs to be examined. First of all, barbell's trajectory, which leads to derivation of barbell's velocity and acceleration over time, is tracked by using image processing technology such as pattern recognition from video clip filmed the lifter's performance. Since the pull used during the clean is similar to the pull used during the snatch, the focus is set on examination of the jerk. Five kinematic characteristics—“Jerk‐Preparing‐Time,” “Jerk‐Drive‐Velocity,” “Jerk‐Time,” “Jerk‐Offset,” and “Jerk‐Drop” are newly introduced to evaluate the jerk technique. Then, a kinematic model which is comprised of springs and dashpots is proposed in order to simulate and optimize the jerk using elasticity of weightlifting bar. Spring constant and damping coefficient of the model is estimated by analyzing the barbell's oscillation on the shoulders. Besides, spring constant is calculated by theory of bending of beam, as well. Finally, an optimal control problem based on the proposed kinematic model is formulated to optimize the jerk. The methodology is illustrated with case study, showing good agreement with actual lifts. It could be useful for improving the jerk technique.
- 17 November 2024
- Published by Wiley in Engineering Reports
- Vol. 7 (1)
Open AccessKinematic Analysis and Optimization of Jerk Considering Elasticity of Weightlifting Bar and Damping Effect of Body in Clean and Jerk
The purpose of this study is kinematic analysis and optimization of jerk considering elasticity of the weightlifting bar and damping effect of the body. In order for weightlifters to achieve good technical skills in clean and jerk, the elasticity of weightlifting bar needs to be examined. First of all, barbell's trajectory, which leads to derivation of barbell's velocity and acceleration over time, is tracked by using image processing technology such as pattern recognition from video clip filmed the lifter's performance. Since the pull used during the clean is similar to the pull used during the snatch, the focus is set on examination of the jerk. Five kinematic characteristics—“Jerk‐Preparing‐Time,” “Jerk‐Drive‐Velocity,” “Jerk‐Time,” “Jerk‐Offset,” and “Jerk‐Drop” are newly introduced to evaluate the jerk technique. Then, a kinematic model which is comprised of springs and dashpots is proposed in order to simulate and optimize the jerk using elasticity of weightlifting bar. Spring constant and damping coefficient of the model is estimated by analyzing the barbell's oscillation on the shoulders. Besides, spring constant is calculated by theory of bending of beam, as well. Finally, an optimal control problem based on the proposed kinematic model is formulated to optimize the jerk. The methodology is illustrated with case study, showing good agreement with actual lifts. It could be useful for improving the jerk technique.
- Open Access
- 1 January 2024
- Published by Wiley in Advances in Civil Engineering
- Vol. 2024 (1)
An Optimization Model for Shell Plate Seam Landing Using Minimum Manufacturing Cost and a Solution by Genetic Algorithm
At present, the landing of seams and butts on the ship hull surface, which plays the important role in the shipbuilding process, is still carried out based on the designers’ skill and experience. In this paper, a new optimization model and its solution method for the landing of seams and butts (for convenience, seam and butt are simply called seam) on the ship hull surface are proposed in order to improve the shipbuilding efficiency. The minimum manufacturing cost of ship hull shell plates (SHSPs) is the objective function, the rules and requirements for the seam position and the size of a single shell plate are the constraints, and the position and shape of the seam are the design variables. The manufacturing cost consists of the costs of cutting, face cutting, bending, and welding, which are calculated for a seam landing, and the strip method is applied to develop the curved shell plate in the bending cost calculation. We consider a shape optimization problem that the optimal solution is searched among the possible alternatives when the position and shape of the seams are changed and apply the genetic algorithm to the solution of this shape optimization problem. The proposed method is applied to a 4200 DWT bulk carrier and a fishing vessel to find the optimal solutions, and compared with the existing seam landings of the ships and the optimum solutions by Taguchi method. The calculation shows that the manufacturing cost by the proposed method for 4200 DWT bulk carrier is reduced by 5.8% and 4.5%, respectively, compared to the existing seam landing and Taguchi method, and by 6.6% and 4.8% for the fishing vessel, respectively. This shows that the proposed method is more effective than the designers’ experience and Taguchi method.
- 1 January 2024
- Published by Wiley in Advances in Civil Engineering
- Vol. 2024 (1)
Open AccessAn Optimization Model for Shell Plate Seam Landing Using Minimum Manufacturing Cost and a Solution by Genetic Algorithm
At present, the landing of seams and butts on the ship hull surface, which plays the important role in the shipbuilding process, is still carried out based on the designers’ skill and experience. In this paper, a new optimization model and its solution method for the landing of seams and butts (for convenience, seam and butt are simply called seam) on the ship hull surface are proposed in order to improve the shipbuilding efficiency. The minimum manufacturing cost of ship hull shell plates (SHSPs) is the objective function, the rules and requirements for the seam position and the size of a single shell plate are the constraints, and the position and shape of the seam are the design variables. The manufacturing cost consists of the costs of cutting, face cutting, bending, and welding, which are calculated for a seam landing, and the strip method is applied to develop the curved shell plate in the bending cost calculation. We consider a shape optimization problem that the optimal solution is searched among the possible alternatives when the position and shape of the seams are changed and apply the genetic algorithm to the solution of this shape optimization problem. The proposed method is applied to a 4200 DWT bulk carrier and a fishing vessel to find the optimal solutions, and compared with the existing seam landings of the ships and the optimum solutions by Taguchi method. The calculation shows that the manufacturing cost by the proposed method for 4200 DWT bulk carrier is reduced by 5.8% and 4.5%, respectively, compared to the existing seam landing and Taguchi method, and by 6.6% and 4.8% for the fishing vessel, respectively. This shows that the proposed method is more effective than the designers’ experience and Taguchi method.
- Open Access
- 5 November 2023
- Published by Wiley in Engineering Reports
- Vol. 6 (8)
Dynamic analysis and optimization of snatch lift based on barbell trajectory and on an anthropometric model comprised of six links
Weightlifting requires explosive strength, high speed, and flexibility. The aim of this research is to present a method based on barbell trajectory and on an anthropometric model comprised of six links for dynamic analysis and optimization of snatch lift. First, snatch lift is divided into nine stages based on barbell trajectory, velocity, and acceleration, while evaluating dynamic characteristics. Then, an anthropometric model of weightlifter which is comprised of six segments: shin, thigh, trunk, upper arm, forearm, and head is developed. Since the head accounts for more or less than 10% of body weight, it should be considered as one link of one degree of freedom. Physical properties such as mass and center of mass of each link are not given by statistical data, but by anthropometry and calculation in Solidworks program. Finally, for barbell trajectory as one of the most important performance indices in weightlifting, an optimal control problem is formulated to minimize a criterion function defined as the sum of work done by lifter during snatch lift and solved by using Pontryagin Maximum Principle (PMP). The proposed method is illustrated with case study, showing results in good agreement with ones by analysis of lifter's actual performances. It can help coach or weightlifter to improve the snatch technique.
- 5 November 2023
- Published by Wiley in Engineering Reports
- Vol. 6 (8)
Open AccessDynamic analysis and optimization of snatch lift based on barbell trajectory and on an anthropometric model comprised of six links
Weightlifting requires explosive strength, high speed, and flexibility. The aim of this research is to present a method based on barbell trajectory and on an anthropometric model comprised of six links for dynamic analysis and optimization of snatch lift. First, snatch lift is divided into nine stages based on barbell trajectory, velocity, and acceleration, while evaluating dynamic characteristics. Then, an anthropometric model of weightlifter which is comprised of six segments: shin, thigh, trunk, upper arm, forearm, and head is developed. Since the head accounts for more or less than 10% of body weight, it should be considered as one link of one degree of freedom. Physical properties such as mass and center of mass of each link are not given by statistical data, but by anthropometry and calculation in Solidworks program. Finally, for barbell trajectory as one of the most important performance indices in weightlifting, an optimal control problem is formulated to minimize a criterion function defined as the sum of work done by lifter during snatch lift and solved by using Pontryagin Maximum Principle (PMP). The proposed method is illustrated with case study, showing results in good agreement with ones by analysis of lifter's actual performances. It can help coach or weightlifter to improve the snatch technique.
- Open Access
- 2 June 2023
- Published by Wiley
Kinematic analysis and optimization of jerk using elasticity of weightlifting bar in clean & jerk
In order for weightlifters to achieve good technical skills in clean & jerk, a study of kinematic analysis and optimization of jerk using elasticity of weightlifting bar in clean & jerk is conducted. First of all, barbell’s trajectory, which leads to derivation of barbell’s velocity and acceleration over time, is tracked from video clip filmed the lifter’s performance by image processing technology including pattern recognition. Since clean lift in clean & jerk is similar to snatch lift in principle, focus is only on jerk just after finish of clean lift. Five kinematic characteristics- “Jerk-Preparing-Time”, “Jerk-Drive-Velocity”, “Jerk-Time”, “Jerk-Offset” and “Jerk-Drop” are newly introduced to evaluate the jerk technique. Then, a kinematic model which is comprised of springs and dashpots is proposed in order to simulate and optimize the jerk using elasticity of weightlifting bar. Spring constant and damping coefficient of the model is estimated by analyzing the barbell’s oscillation on the shoulder. Besides, spring constant is calculated by theory of bending of beam, as well. Finally, an optimal control problem based on the proposed kinematic model is formulated and solved to optimize the jerk. The methodology is illustrated with case study, showing good agreement with actual lifts. It could be useful for optimizing clean & jerk technique.
- 2 June 2023
- Published by Wiley
Open AccessKinematic analysis and optimization of jerk using elasticity of weightlifting bar in clean & jerk
In order for weightlifters to achieve good technical skills in clean & jerk, a study of kinematic analysis and optimization of jerk using elasticity of weightlifting bar in clean & jerk is conducted. First of all, barbell’s trajectory, which leads to derivation of barbell’s velocity and acceleration over time, is tracked from video clip filmed the lifter’s performance by image processing technology including pattern recognition. Since clean lift in clean & jerk is similar to snatch lift in principle, focus is only on jerk just after finish of clean lift. Five kinematic characteristics- “Jerk-Preparing-Time”, “Jerk-Drive-Velocity”, “Jerk-Time”, “Jerk-Offset” and “Jerk-Drop” are newly introduced to evaluate the jerk technique. Then, a kinematic model which is comprised of springs and dashpots is proposed in order to simulate and optimize the jerk using elasticity of weightlifting bar. Spring constant and damping coefficient of the model is estimated by analyzing the barbell’s oscillation on the shoulder. Besides, spring constant is calculated by theory of bending of beam, as well. Finally, an optimal control problem based on the proposed kinematic model is formulated and solved to optimize the jerk. The methodology is illustrated with case study, showing good agreement with actual lifts. It could be useful for optimizing clean & jerk technique.
- 20 April 2023
- Published by Springer Nature
- p. 1-15
Optimization of Ship Energy Efficiency Considering Navigational Environment and Safety
- 20 April 2023
- Published by Springer Nature
- p. 1-15
Optimization of Ship Energy Efficiency Considering Navigational Environment and Safety