Ozgenur Kahvecioglu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ozgenur Kahvecioglu has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Carrie Siu
Argonne National Laboratory
7 shared publications - Mateusz Zuba
Argonne National Laboratory
7 shared publications - Isik Su Buyuker
Department of Chemistry and Materials, State University of New York at Binghamton, Binghamton, New York 13902, United States of America
5 shared publications - Chongmin Wang
Environmental Molecular Sciences Laboratory Pacific Northwest National Laboratory Richland Washington USA
4 shared publications - Jihyeon Gim
Chemical Sciences and Engineering Division, Argonne National Laboratory, Lemont, IL 60439, USA
3 shared publications Krzysztof Z. Pupek
Argonne National Laboratory
3 shared publications
Latest Publications
- Open Access
- 10 November 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Tailoring Solid-State Reaction Pathways for Bulk Fluorination of Mn-Rich Rock-Salt Cathodes
Manganese-based cation-disordered rock-salt (DRX) cathodes offer high capacities without relying on cobalt and nickel, but maintaining that capacity over extended cycling often requires bulk fluorination. The challenge is that incorporating fluorine into Mn-rich DRX host structures is hindered by unfavorable thermodynamics and the stability of LiF, often necessitating elevated synthesis temperatures that promote severe lithium and fluorine volatilization. This study overcomes that limitation by manipulating the solid-state reaction pathway using unconventional Li6MnO4 and MnF2 precursors in a challenging Mn-rich model system (Li1.2Mn0.6Ti0.2O2–xFx). This precursor engineering strategy reshapes the thermodynamic landscape. Computational modeling and in situ X-ray diffraction reveal that by using reactive starting materials, we suppress the crystallization of less reactive intermediates, enabling bulk fluorination at a lower temperature. The resulting DRX retains both a high fluorine content and the lithium excess required for three-dimensional percolation, delivering improved electrochemical performance relative to material synthesized from conventional precursors.
- 10 November 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Open AccessTailoring Solid-State Reaction Pathways for Bulk Fluorination of Mn-Rich Rock-Salt Cathodes
Manganese-based cation-disordered rock-salt (DRX) cathodes offer high capacities without relying on cobalt and nickel, but maintaining that capacity over extended cycling often requires bulk fluorination. The challenge is that incorporating fluorine into Mn-rich DRX host structures is hindered by unfavorable thermodynamics and the stability of LiF, often necessitating elevated synthesis temperatures that promote severe lithium and fluorine volatilization. This study overcomes that limitation by manipulating the solid-state reaction pathway using unconventional Li6MnO4 and MnF2 precursors in a challenging Mn-rich model system (Li1.2Mn0.6Ti0.2O2–xFx). This precursor engineering strategy reshapes the thermodynamic landscape. Computational modeling and in situ X-ray diffraction reveal that by using reactive starting materials, we suppress the crystallization of less reactive intermediates, enabling bulk fluorination at a lower temperature. The resulting DRX retains both a high fluorine content and the lithium excess required for three-dimensional percolation, delivering improved electrochemical performance relative to material synthesized from conventional precursors.
- 3 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
Holistic Process Development of Lithium–Manganese-Rich Layered Oxides by Hydroxide Coprecipitation Using Taylor Vortex Reactors
Lithium–manganese-rich (LMR) layered oxides are promising next-generation cathode materials due to their high discharge capacities and reduced reliance on costly transition metals, yet scalable synthesis routes that deliver consistent performance remain limited. Here, we present a holistic process development study for LMR synthesized from Mn-rich hydroxide via continuous coprecipitation using a Taylor Vortex Reactor followed by solid-state lithiation. Systematic control of coprecipitation parameters demonstrates that pH and ammonia concentration regulate supersaturation, enabling controlled primary particle growth and the formation of spherical, high-density Mn-rich hydroxide precursors. Calcination studies reveal that both the lithium source (Li2CO3 versus LiOH) and heating protocol (one-step vs two-step) critically influence phase evolution, with two-step protocols improving electrochemical performance. Notably, LiOH-derived LMR exhibits a higher first-cycle discharge capacity (up to 240 mAh g–1), lower impedance growth, and improved cycling stability compared to Li2CO3-derived materials. Correlated in situ X-ray diffraction and X-ray absorption spectroscopy identify distinct lithiation pathways, where LiOH enables earlier lithiation through a spinel-like intermediate, while Li2CO3 proceeds via a Li-deficient phase prior to lithiation, resulting in less homogeneous Li incorporation. These findings establish direct process–structure–property relationships across different processing steps, demonstrating that LMR performance is governed by synthetic design and providing a scalable framework for high-density, high-performance cathode manufacturing.
- 3 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
Holistic Process Development of Lithium–Manganese-Rich Layered Oxides by Hydroxide Coprecipitation Using Taylor Vortex Reactors
Lithium–manganese-rich (LMR) layered oxides are promising next-generation cathode materials due to their high discharge capacities and reduced reliance on costly transition metals, yet scalable synthesis routes that deliver consistent performance remain limited. Here, we present a holistic process development study for LMR synthesized from Mn-rich hydroxide via continuous coprecipitation using a Taylor Vortex Reactor followed by solid-state lithiation. Systematic control of coprecipitation parameters demonstrates that pH and ammonia concentration regulate supersaturation, enabling controlled primary particle growth and the formation of spherical, high-density Mn-rich hydroxide precursors. Calcination studies reveal that both the lithium source (Li2CO3 versus LiOH) and heating protocol (one-step vs two-step) critically influence phase evolution, with two-step protocols improving electrochemical performance. Notably, LiOH-derived LMR exhibits a higher first-cycle discharge capacity (up to 240 mAh g–1), lower impedance growth, and improved cycling stability compared to Li2CO3-derived materials. Correlated in situ X-ray diffraction and X-ray absorption spectroscopy identify distinct lithiation pathways, where LiOH enables earlier lithiation through a spinel-like intermediate, while Li2CO3 proceeds via a Li-deficient phase prior to lithiation, resulting in less homogeneous Li incorporation. These findings establish direct process–structure–property relationships across different processing steps, demonstrating that LMR performance is governed by synthetic design and providing a scalable framework for high-density, high-performance cathode manufacturing.
- 24 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (34) , 46291-46301
Degradation Mechanisms of Fluorinated Disordered Rocksalt Cathodes: Effects of Electrolyte Chemistry and Discharge Voltage
Cation-disordered rock-salt (DRX) oxides have emerged as a promising class of high energy density cathodes for next-generation lithium-ion batteries. Fluorination has been widely employed to tune the redox chemistry and structural stability of these materials, leading to enhanced electrochemical performance. However, the degradation mechanisms of fluorinated DRX (F-DRX) cathodes during electrochemical cycling remain poorly understood. Here, we investigate the degradation behavior of an F-DRX cathode cycled in a conventional carbonate-based electrolyte and a localized high-concentration electrolyte (LHCE). By correlating electrochemical performance with interfacial and bulk structural evolution, we elucidate the role of electrolyte chemistry and deep discharge voltage in governing structural transformation and degradation. The results reveal more pronounced surface and bulk structural changes in the conventional LiPF6-carbonate electrolyte relative to LiFSI-LHCE, indicating accelerated degradation in the former. Lowering the discharge cutoff voltage from 2.0 to 1.5 V further promotes interfacial degradation in both electrolyte systems. This work demonstrates that the LHCE offers superior compatibility with F-DRX cathodes, enabling stable cycling by mitigating surface and bulk structural degradation. These insights clarify the interplay between electrolyte chemistry and voltage window in F-DRX degradation and highlight the critical importance of advanced electrolyte designs for unlocking the full potential of DRX cathodes.
- 24 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (34) , 46291-46301
Degradation Mechanisms of Fluorinated Disordered Rocksalt Cathodes: Effects of Electrolyte Chemistry and Discharge Voltage
Cation-disordered rock-salt (DRX) oxides have emerged as a promising class of high energy density cathodes for next-generation lithium-ion batteries. Fluorination has been widely employed to tune the redox chemistry and structural stability of these materials, leading to enhanced electrochemical performance. However, the degradation mechanisms of fluorinated DRX (F-DRX) cathodes during electrochemical cycling remain poorly understood. Here, we investigate the degradation behavior of an F-DRX cathode cycled in a conventional carbonate-based electrolyte and a localized high-concentration electrolyte (LHCE). By correlating electrochemical performance with interfacial and bulk structural evolution, we elucidate the role of electrolyte chemistry and deep discharge voltage in governing structural transformation and degradation. The results reveal more pronounced surface and bulk structural changes in the conventional LiPF6-carbonate electrolyte relative to LiFSI-LHCE, indicating accelerated degradation in the former. Lowering the discharge cutoff voltage from 2.0 to 1.5 V further promotes interfacial degradation in both electrolyte systems. This work demonstrates that the LHCE offers superior compatibility with F-DRX cathodes, enabling stable cycling by mitigating surface and bulk structural degradation. These insights clarify the interplay between electrolyte chemistry and voltage window in F-DRX degradation and highlight the critical importance of advanced electrolyte designs for unlocking the full potential of DRX cathodes.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 426
Paving Routes for Upscaling Syntheses of Layered Cathode Active Materials for Sodium-Ion Batteries
Layered cathode active materials (LCAMs) with high energy density feature are promising for sodium-ion batteries. However, the preparation of LCAMs is mainly based on solid-state synthesis, involving energy-intensive ball milling of transition metal oxides or salts with sodium carbonate followed by prolonged calcination, which is not unscalable and causes unfavorable morphology together with uneven particle size distribution. Therefore, it is essential to establish a scalable synthesis alternative. Herein, at Argonne National Laboratory Materials Engineering Research Facility, we novelly performed research, development and demonstration (RD&D) of upscaling syntheses of LCAMs. The results confirm the successful establishment of upscaling syntheses of LCAMs due to the precise control of P2/O3 phase ratio and sodium cation stoichiometry along with uniform morphology (spherical-like secondary particles) and particle size distribution. More interestingly, energy saving sodiation is realized for manufacturing practice due to the reduced calcination temperature and/or duration.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 426
Paving Routes for Upscaling Syntheses of Layered Cathode Active Materials for Sodium-Ion Batteries
Layered cathode active materials (LCAMs) with high energy density feature are promising for sodium-ion batteries. However, the preparation of LCAMs is mainly based on solid-state synthesis, involving energy-intensive ball milling of transition metal oxides or salts with sodium carbonate followed by prolonged calcination, which is not unscalable and causes unfavorable morphology together with uneven particle size distribution. Therefore, it is essential to establish a scalable synthesis alternative. Herein, at Argonne National Laboratory Materials Engineering Research Facility, we novelly performed research, development and demonstration (RD&D) of upscaling syntheses of LCAMs. The results confirm the successful establishment of upscaling syntheses of LCAMs due to the precise control of P2/O3 phase ratio and sodium cation stoichiometry along with uniform morphology (spherical-like secondary particles) and particle size distribution. More interestingly, energy saving sodiation is realized for manufacturing practice due to the reduced calcination temperature and/or duration.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (68) , 3270
Process Development and Scale-up of Disordered Rocksalt Materials (DRX) Via Molten Salt-Assisted Synthesis
Disordered rocksalt (DRX) materials are of growing interest for energy storage applications due to their expanded compositional space and high electrochemical capacities. Molten salt assisted synthesis method provides a viable route for DRX synthesis, yet the influence of processing parameters on material formation and characteristics requires further exploration. In this study, we examine the effects of molten salt composition, reaction temperature, and processing conditions on the structural and electrochemical properties of DRX materials. Additionally, we investigate the scale-up process to understand how synthesis conditions influence material formation at larger scales. This work provides new insights into the synthesis-structure-property relationships of DRX materials, aiding their further development.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (68) , 3270
Process Development and Scale-up of Disordered Rocksalt Materials (DRX) Via Molten Salt-Assisted Synthesis
Disordered rocksalt (DRX) materials are of growing interest for energy storage applications due to their expanded compositional space and high electrochemical capacities. Molten salt assisted synthesis method provides a viable route for DRX synthesis, yet the influence of processing parameters on material formation and characteristics requires further exploration. In this study, we examine the effects of molten salt composition, reaction temperature, and processing conditions on the structural and electrochemical properties of DRX materials. Additionally, we investigate the scale-up process to understand how synthesis conditions influence material formation at larger scales. This work provides new insights into the synthesis-structure-property relationships of DRX materials, aiding their further development.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (5) , 854
Layered Oxide Cathodes for the Next Generation of Na-Ion Batteries
Layered oxides are among the most commercially available and used cathodes in current generation Na-ion batteries. Typically, these electrodes contain greater than 30% Ni in Mn/Fe containing compositions (NFM) to deliver favorable redox chemistry. We require cathodes comprised of low-cost earth-abundant elements such as NFM materials with reduced Ni content that minimize the use of critical materials of which domestic resources are limited. Consequently, reducing active material cost while maintaining the high capacity/voltage enjoyed from high Ni content cathodes is a challenge, and new layered oxides compositions must be identified that satisfy these concerns. Furthermore, these NFM stoichiometries must be optimized for performance and stability while contending with the electrochemical and structural differences that arise in low-Ni containing layered oxides. To this end, we will share our pursuits in optimizing these materials through varied composition, synthetic conditions, and cation doping strategies.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (5) , 854
Layered Oxide Cathodes for the Next Generation of Na-Ion Batteries
Layered oxides are among the most commercially available and used cathodes in current generation Na-ion batteries. Typically, these electrodes contain greater than 30% Ni in Mn/Fe containing compositions (NFM) to deliver favorable redox chemistry. We require cathodes comprised of low-cost earth-abundant elements such as NFM materials with reduced Ni content that minimize the use of critical materials of which domestic resources are limited. Consequently, reducing active material cost while maintaining the high capacity/voltage enjoyed from high Ni content cathodes is a challenge, and new layered oxides compositions must be identified that satisfy these concerns. Furthermore, these NFM stoichiometries must be optimized for performance and stability while contending with the electrochemical and structural differences that arise in low-Ni containing layered oxides. To this end, we will share our pursuits in optimizing these materials through varied composition, synthetic conditions, and cation doping strategies.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (3) , 366
Advancing Scalable Synthesis Methods for Earth-Abundant Li-Ion Cathode Chemistries
The advancement of battery technologies is increasingly constrained by the high costs and uneven geographical distribution of critical materials like cobalt and nickel, creating supply chain vulnerabilities and limiting scalability. To enable the widespread adoption of electric mobility and large-scale grid storage, it is essential to develop earth-abundant, low-cost, and scalable battery chemistries that reduce reliance on these critical resources and utilize more abundant elements such as Mn, Fe and Ti. While some earth-abundant cathode active materials (CAMs) can be synthesized using existing methods, others require innovative, high-quality, and scalable manufacturing strategies. At the Materials Engineering Research Facility (MERF) at Argonne National Laboratory, we are pioneering sulfate-free and zero-waste synthetic processes to advance sustainable production. This work highlights our efforts in developing continuous coprecipitation via Taylor Vortex Reactor and single-step nano-scale CAM synthesis using Flame Spray Pyrolysis. These emerging techniques unlock the potential of Li-Mn-rich layered oxides and Li-excess disordered rocksalt (DRX) cathodes for next-generation Li-ion batteries, supporting cost-effective energy storage solutions critical to advance widespread adoption of large-scale energy storage systems.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (3) , 366
Advancing Scalable Synthesis Methods for Earth-Abundant Li-Ion Cathode Chemistries
The advancement of battery technologies is increasingly constrained by the high costs and uneven geographical distribution of critical materials like cobalt and nickel, creating supply chain vulnerabilities and limiting scalability. To enable the widespread adoption of electric mobility and large-scale grid storage, it is essential to develop earth-abundant, low-cost, and scalable battery chemistries that reduce reliance on these critical resources and utilize more abundant elements such as Mn, Fe and Ti. While some earth-abundant cathode active materials (CAMs) can be synthesized using existing methods, others require innovative, high-quality, and scalable manufacturing strategies. At the Materials Engineering Research Facility (MERF) at Argonne National Laboratory, we are pioneering sulfate-free and zero-waste synthetic processes to advance sustainable production. This work highlights our efforts in developing continuous coprecipitation via Taylor Vortex Reactor and single-step nano-scale CAM synthesis using Flame Spray Pyrolysis. These emerging techniques unlock the potential of Li-Mn-rich layered oxides and Li-excess disordered rocksalt (DRX) cathodes for next-generation Li-ion batteries, supporting cost-effective energy storage solutions critical to advance widespread adoption of large-scale energy storage systems.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (68) , 3268
Exploring the Influence of Chelating Agents on Particle Formation in Continuous Coprecipitation
This talk discusses the role of chelating agents in influencing the electrochemical performance of transition metal hydroxide-based cathode materials for energy storage applications. The focus is placed on how variations in the molar ratios of different chelating agents during ammonia-free continuous coprecipitation processes affect particle formation, material properties, and the overall performance of the resulting cathode materials. The impact of chelating agents on the structure, composition, and morphology of the materials is discussed, as these changes impact electrochemical behavior, including capacity and cycling stability. The relationship between chelating agent concentration and material characteristics is explored, highlighting the potential of these agents in comparison to traditional coprecipitation techniques for next-generation energy storage devices. Additionally, the findings suggest that optimizing chelating agent use can control particle formation, improve long-term cycling performance, and enhance scalability for industrial applications. Consideration is also given to cost-effective chelating agents that do not require energy-intensive manufacturing operations for recycling or waste recovery. By addressing these aspects, this work contributes to bridging the gap between fundamental research and industrial implementation, supporting the advancement of more efficient and cost-effective energy storage technologies.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (68) , 3268
Exploring the Influence of Chelating Agents on Particle Formation in Continuous Coprecipitation
This talk discusses the role of chelating agents in influencing the electrochemical performance of transition metal hydroxide-based cathode materials for energy storage applications. The focus is placed on how variations in the molar ratios of different chelating agents during ammonia-free continuous coprecipitation processes affect particle formation, material properties, and the overall performance of the resulting cathode materials. The impact of chelating agents on the structure, composition, and morphology of the materials is discussed, as these changes impact electrochemical behavior, including capacity and cycling stability. The relationship between chelating agent concentration and material characteristics is explored, highlighting the potential of these agents in comparison to traditional coprecipitation techniques for next-generation energy storage devices. Additionally, the findings suggest that optimizing chelating agent use can control particle formation, improve long-term cycling performance, and enhance scalability for industrial applications. Consideration is also given to cost-effective chelating agents that do not require energy-intensive manufacturing operations for recycling or waste recovery. By addressing these aspects, this work contributes to bridging the gap between fundamental research and industrial implementation, supporting the advancement of more efficient and cost-effective energy storage technologies.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (5) , 793
Scalable Synthesis Strategies for Layered Sodium-Ion Cathode Materials
Global demand for cost-effective energy solutions has driven advancements in sodium-ion battery (SIB) technology, positioning it as a viable alternative to lithium-ion batteries (LIB) due to the wide availability and low cost of sodium precursors. Among various cathode materials, sodium layered transition metal oxides (NaTMO 2 ) are particularly attractive, as they primarily utilize earth abundant and non-critical elements such as manganese and iron, reducing reliance on expensive and supply-constrained materials. Within the DOE Office of Vehicle Technologies Low-Cost Earth-Abundant Na Storage (LENS) multi-lab consortium, the cathode thrust focuses on advancing NaTMO 2 materials through tailored compositions and processing techniques to enhance electrochemical performance and stability. Despite the advantages of these low-cost precursors, the synthesis of layered oxides via scalable, aqueous-based coprecipitation remains challenging due to the mismatch in solubility product constants among iron, manganese, and nickel, which complicates the formation of a homogeneous precursor. Furthermore, the gradual oxidation of iron in transition metal solutions presents a persistent issue, impacting compositional uniformity and process continuity. Addressing these fundamental synthesis limitations is essential for the development of high-performance NaTMO 2 cathodes. This talk will explore coprecipitation techniques and calcination strategies aimed at improving phase purity, precursor morphology, and overall electrochemical performance, contributing to the broader industrial feasibility of sodium-ion battery technology.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (5) , 793
Scalable Synthesis Strategies for Layered Sodium-Ion Cathode Materials
Global demand for cost-effective energy solutions has driven advancements in sodium-ion battery (SIB) technology, positioning it as a viable alternative to lithium-ion batteries (LIB) due to the wide availability and low cost of sodium precursors. Among various cathode materials, sodium layered transition metal oxides (NaTMO 2 ) are particularly attractive, as they primarily utilize earth abundant and non-critical elements such as manganese and iron, reducing reliance on expensive and supply-constrained materials. Within the DOE Office of Vehicle Technologies Low-Cost Earth-Abundant Na Storage (LENS) multi-lab consortium, the cathode thrust focuses on advancing NaTMO 2 materials through tailored compositions and processing techniques to enhance electrochemical performance and stability. Despite the advantages of these low-cost precursors, the synthesis of layered oxides via scalable, aqueous-based coprecipitation remains challenging due to the mismatch in solubility product constants among iron, manganese, and nickel, which complicates the formation of a homogeneous precursor. Furthermore, the gradual oxidation of iron in transition metal solutions presents a persistent issue, impacting compositional uniformity and process continuity. Addressing these fundamental synthesis limitations is essential for the development of high-performance NaTMO 2 cathodes. This talk will explore coprecipitation techniques and calcination strategies aimed at improving phase purity, precursor morphology, and overall electrochemical performance, contributing to the broader industrial feasibility of sodium-ion battery technology.
- Open Access
Designing Advanced Electrolytes for High‐Voltage High‐Capacity Disordered Rocksalt Cathodes
Lithium (Li)‐excess transition metal oxide materials which crystallize in the cation‐disordered rock salt (DRX) structure are promising cathodes for realizing low‐cost, high‐energy‐density Li batteries. However, the state‐of‐the‐art electrolytes for Li‐ion batteries cannot meet the high‐voltage stability requirement for high‐voltage DRX cathodes, thus new electrolytes are urgently demanded. It has been reported that the solvation structures and properties of the electrolytes critically influence the performance and stability of the batteries. In this study, the structure–property relationships of various electrolytes with different solvent‐to‐diluent ratios are systematically investigated through a combination of theoretical calculations and experimental tests and analyses. This approach guides the development of electrolytes with unique solvation structures and characteristics, exhibiting high voltage stability, and enhancing the formation of stable electrode/electrolyte interphases. These electrolytes enable the realization of Li||Li 1.094 Mn 0.676 Ti 0.228 O 2 (LMTO) DRX cells with improved performance compared to the conventional electrolyte. Specifically, Li||LMTO cells with the optimized advanced controlled‐solvation electrolyte deliver higher specific capacity and longer cycle life compared to cells with the conventional electrolyte. Additionally, the investigation into the structure–property relationship provides a foundational basis for designing advanced electrolytes, which are crucial for the stable cycling of emerging high‐voltage cathodes.
Open AccessDesigning Advanced Electrolytes for High‐Voltage High‐Capacity Disordered Rocksalt Cathodes
Lithium (Li)‐excess transition metal oxide materials which crystallize in the cation‐disordered rock salt (DRX) structure are promising cathodes for realizing low‐cost, high‐energy‐density Li batteries. However, the state‐of‐the‐art electrolytes for Li‐ion batteries cannot meet the high‐voltage stability requirement for high‐voltage DRX cathodes, thus new electrolytes are urgently demanded. It has been reported that the solvation structures and properties of the electrolytes critically influence the performance and stability of the batteries. In this study, the structure–property relationships of various electrolytes with different solvent‐to‐diluent ratios are systematically investigated through a combination of theoretical calculations and experimental tests and analyses. This approach guides the development of electrolytes with unique solvation structures and characteristics, exhibiting high voltage stability, and enhancing the formation of stable electrode/electrolyte interphases. These electrolytes enable the realization of Li||Li 1.094 Mn 0.676 Ti 0.228 O 2 (LMTO) DRX cells with improved performance compared to the conventional electrolyte. Specifically, Li||LMTO cells with the optimized advanced controlled‐solvation electrolyte deliver higher specific capacity and longer cycle life compared to cells with the conventional electrolyte. Additionally, the investigation into the structure–property relationship provides a foundational basis for designing advanced electrolytes, which are crucial for the stable cycling of emerging high‐voltage cathodes.