PPPatrick M. Praegla

Patrick M. Praegla

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Patrick M. Praegla has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Statistical approach to the investigation of adjusting the dynamic structural behavior of additively manufactured parts using composite lattice structures: influence of the geometric parameters and the filling with epoxy resin

    by Thomas Mair, Johannes Fuerbacher, Yu He, Patrick M. Praegla, David L. Wenzler, Siegfried Baehr, Christoph Meier, Michael F. Zaeh

    The integration of lattice structures into parts using powder bed fusion of metals using a laser beam (PBF-LB/M) allows tailoring mechanical properties by adjusting their geometric parameters. A composite material created by filling the voids in the lattice structures with a second, viscoelastic material offers promising dynamic properties. However, understanding the relationship between the lattice geometry and the resulting dynamic mechanical behavior is essential for designing composite materials and applying them to industrial components, such as boring bars. This study investigated the dynamic structural behavior of various strut- and wall-based lattice structures filled with epoxy resin. Lattice structures were integrated into IN718 beams manufactured by PBF-LB/M. Experimental modal analyses were conducted to evaluate the changes in the eigenfrequency, the dynamic compliance, and the damping ratio before and after the filling. Microscopic and cross-sectional analyses supported examinations. The results showed that the unit cell size and the volume fraction significantly influence the infiltration. In addition, the eigenfrequency and the dynamic compliance can be effectively adjusted by changing the volume fraction. In particular, the epoxy resin filling had a large effect on the damping ratio and increased it by a factor of up to 3.6 for the body-centered cubic cell. Among all the studied lattice types, the diamond TPMS structure had the highest eigenfrequency and the lowest dynamic compliance. From the results of the statistical evaluation, recommendations of action for the design of composite lattice structures were derived.


  • Open Access

    Validity of Thermal Simulation Models for Different Laser Beam Shapes in Bead-on-Plate Melting

    by Vijaya Holla, Jonas Grünewald, Philipp Kopp, Patrick M. Praegla, Christoph Meier, Katrin Wudy, Stefan Kollmannsberger

    Computational models that predict melt pool shapes and temperature evolution in laser-based powder bed fusion of metals (PBF-LB/M) can range from simple thermal simulation models to more advanced models that incorporate more detailed physics of the process. While advanced models can accurately predict thermal fields and melt pool fluid dynamics, they are computationally more expensive and, thus, less suited for part-scale simulations or numerical optimization, where repeated model evaluations are necessary. On the other hand, thermal simulations are computationally efficient and attractive for their simplicity, but their accuracy is mainly limited to conduction-dominated processes. Moreover, the conduction model’s validity range is not fully understood for non-Gaussian laser beam shapes. This paper demonstrates that predictions of melt pool depth and width carried out by a heat conduction model are accurate to within 20 % for all investigated laser profiles, provided that the simulated maximum temperature does not exceed a certain threshold value for stainless steel 316L. This is established by thoroughly investigating the validity range of the heat conduction model through comparisons with over 200 single-track experiments on bare plates. The temperature predictions from the model are compared with multi-physics simulations using smoothed particle hydrodynamics (SPH). Through detailed analysis and validation for three laser beam shapes, this contribution provides valuable insights into the accuracy and applicability of heat conduction models in bead-on-plate melting simulations and offers a path to optimize process parameters, such as laser beam shape, scanning strategy, and other processes for diverse applications aimed at PBF-LB/M.


  • Open Access

    Additively manufactured structures with powder inclusions for controllable dissipation: The critical influence of packing density

    by Patrick M. Praegla, Thomas Mair, Andreas Wimmer, Sebastian L. Fuchs, Michael F. Zaeh, Wolfgang A. Wall, Christoph Meier


  • Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Blade-based spreading approaches

    by Ryan W. Penny, Daniel Oropeza, Patrick M. Praegla, Reimar Weissbach, Christoph Meier, Wolfgang A. Wall, A. John Hart


  • Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Roller-based spreading approaches

    by Ryan W. Penny, Daniel Oropeza, Reimar Weissbach, Patrick M. Praegla, Christoph Meier, Wolfgang A. Wall, A. John Hart


  • Open Access

    Towards Additively Manufactured Metamaterials with Powder Inclusions for Controllable Dissipation: The Critical Influence of Packing Density

    by Patrick M. Praegla, Thomas Mair, Andreas Wimmer, Sebastian L. Fuchs, Niklas Fehn, Michael F. Zaeh, Wolfgang A. Wall, Christoph Meier

    Particle dampers represent a simple yet effective means to reduce unwanted oscillations when attached to structural components. Powder bed fusion additive manufacturing of metals allows to integrate particle inclusions of arbitrary shape, size and spatial distribution directly into bulk material, giving rise to novel metamaterials with controllable dissipation without the need for additional external damping devices. At present, however, it is not well understood how the degree of dissipation is influenced by the properties of the enclosed powder packing. In the present work, a two-way coupled discrete element - finite element model is proposed allowing for the first time to consistently describe the interaction between oscillating deformable structures and enclosed powder packings. As fundamental test case, the free oscillations of a hollow cantilever beam filled with various powder packings differing in packing density, particle size, and surface properties are considered to systematically study these factors of influence. Critically, it is found that the damping characteristics strongly depend on the packing density of the enclosed powder and that an optimal packing density exists at which the dissipation is maximized. Moreover, it is found that the influence of (absolute) particle size on dissipation is rather small. First-order analytical models for different deformation modes of such powder cavities are derived to shed light on this observation.


  • Open Access

    A versatile SPH modeling framework for coupled microfluid-powder dynamics in additive manufacturing: binder jetting, material jetting, directed energy deposition and powder bed fusion

    by Sebastian L. Fuchs, Patrick M. Praegla, Christian J. Cyron, Wolfgang A. Wall, Christoph Meier

    Many additive manufacturing (AM) technologies rely on powder feedstock, which is fused to form the final part either by melting or by chemical binding with subsequent sintering. In both cases, process stability and resulting part quality depend on dynamic interactions between powder particles and a fluid phase, i.e., molten metal or liquid binder. The present work proposes a versatile computational modeling framework for simulating such coupled microfluid-powder dynamics problems involving thermo-capillary flow and reversible phase transitions. In particular, a liquid and a gas phase are interacting with a solid phase that consists of a substrate and mobile powder particles while simultaneously considering temperature-dependent surface tension and wetting effects. In case of laser–metal interactions, the effect of rapid evaporation is incorporated through additional mechanical and thermal interface fluxes. All phase domains are spatially discretized using smoothed particle hydrodynamics. The method’s Lagrangian nature is beneficial in the context of dynamically changing interface topologies due to phase transitions and coupled microfluid-powder dynamics. Special care is taken in the formulation of phase transitions, which is crucial for the robustness of the computational scheme. While the underlying model equations are of a very general nature, the proposed framework is especially suitable for the mesoscale modeling of various AM processes. To this end, the generality and robustness of the computational modeling framework is demonstrated by several application-motivated examples representing the specific AM processes binder jetting, material jetting, directed energy deposition, and powder bed fusion. Among others, it is shown how the dynamic impact of droplets in binder jetting or the evaporation-induced recoil pressure in powder bed fusion leads to powder motion, distortion of the powder packing structure, and powder particle ejection.


  • Open Access

    A Versatile SPH Modeling Framework for Coupled Microfluid-Powder Dynamics in Additive Manufacturing: Binder Jetting, Material Jetting, Directed Energy Deposition and Powder Bed Fusion

    by Sebastian L. Fuchs, Patrick M. Praegla, Christian J. Cyron, Wolfgang A. Wall, Christoph Meier

    Many additive manufacturing (AM) technologies rely on powder feedstock, which is fused to form the final part either by melting or by chemical binding with subsequent sintering. In both cases, process stability and resulting part quality depend on dynamic interactions between powder particles and a fluid phase, i.e., molten metal or liquid binder. The present work proposes a versatile computational modeling framework for simulating such coupled microfluid-powder dynamics problems involving thermo-capillary flow and reversible phase transitions. In particular, a liquid and a gas phase are interacting with a solid phase that consists of a substrate and mobile powder particles while simultaneously considering temperature-dependent surface tension and wetting effects. In case of laser-metal interactions, the effect of rapid evaporation is incorporated through additional mechanical and thermal interface fluxes. All phase domains are spatially discretized using smoothed particle hydrodynamics. The method's Lagrangian nature is beneficial in the context of dynamically changing interface topologies. Special care is taken in the formulation of phase transitions, which is crucial for the robustness of the computational scheme. While the underlying model equations are of a very general nature, the proposed framework is especially suitable for the mesoscale modeling of various AM processes. To this end, the generality and robustness of the computational modeling framework is demonstrated by several application-motivated examples representing the specific AM processes binder jetting, material jetting, directed energy deposition, and powder bed fusion. Among others, it is shown how the dynamic impact of droplets in binder jetting or the evaporation-induced recoil pressure in powder bed fusion leads to powder motion, distortion of the powder packing structure, and powder particle ejection.


  • Spatial mapping of powder layer density for metal additive manufacturing via transmission X-ray imaging

    by Ryan W. Penny, Patrick M. Praegla, Marvin Ochsenius, Daniel Oropeza, Reimar Weissbach, Christoph Meier, Wolfgang A. Wall, A. John Hart