Zhilin Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhilin Tian has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Bin Li
School of Materials, Shenzhen Campus of Sun Yat-sen University, Shenzhen, China
7 shared publications Zhilin Chen
5 shared publicationsLiya Zheng
4 shared publicationsShuping Wen
4 shared publicationsKeyu Ming
2 shared publicationsYingpeng Zhang
2 shared publications
Latest Publications
- Open Access
- 1 June 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (8)
Revealing the influence of composition and interface on the mechanical and dielectric properties of Si 3 N 4 fiber-reinforced ceramic composites
Si3N4 fiber-reinforced ceramic composites are promising candidates for high-temperature wave-transparent applications, yet the relationships among composition, interface characteristics, and mechanical performance remain inadequately understood. This study designs three kinds of composites: Si3N4f/BN, Si3N4f/SiO2, and Si3N4f/SiO2-BN and systematically investigates their performances. Results reveal that reaction between BN precursors and silanol groups in the SiO2 matrix during the fabrication of Si3N4f/SiO2-BN enhance the chemical compatibility between fiber and matrix, promoting elemental interdiffusion and forming a thicker interfacial diffusion region. Consequently, the interfacial shear strength of Si3N4f/SiO2-BN is 1.86 and 3.73 times that of Si3N4f/BN and Si3N4f/SiO2, respectively. The stronger fiber-matrix bonding in Si3N4f/SiO2-BN suppresses fiber pull-out, whereas the weaker bonding in the other two composites permits it. Si3N4f/BN primarily exhibits fiber bundle pull-out, whereas Si3N4f/SiO2 shows long single-fiber pull-out, indicating improved damage tolerance. In contrast, Si3N4f/SiO2-BN displays a typical brittle fracture behavior with minimal fiber pull-out and degraded mechanical properties. The excessive interfacial bonding, together with the thermal residual stress arising from the thermal expansion mismatch between the Si3N4 fiber and the matrix, degrades the flexural and compressive strengths. Moreover, this excessive bonding restricts interfacial debonding and fiber pull-out, leading to a brittle fracture mode. Despite differences in interfacial microstructure, all three composites exhibit good dielectric properties. The use of SiO2 and BN matrices effectively reduces both the dielectric constant and dielectric loss tangent of Si3N4 fiber-reinforced ceramic composites. These findings provide valuable insights into the design of high-temperature wave-transparent composites operated in extreme environments.
- 1 June 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (8)
Open AccessRevealing the influence of composition and interface on the mechanical and dielectric properties of Si 3 N 4 fiber-reinforced ceramic composites
Si3N4 fiber-reinforced ceramic composites are promising candidates for high-temperature wave-transparent applications, yet the relationships among composition, interface characteristics, and mechanical performance remain inadequately understood. This study designs three kinds of composites: Si3N4f/BN, Si3N4f/SiO2, and Si3N4f/SiO2-BN and systematically investigates their performances. Results reveal that reaction between BN precursors and silanol groups in the SiO2 matrix during the fabrication of Si3N4f/SiO2-BN enhance the chemical compatibility between fiber and matrix, promoting elemental interdiffusion and forming a thicker interfacial diffusion region. Consequently, the interfacial shear strength of Si3N4f/SiO2-BN is 1.86 and 3.73 times that of Si3N4f/BN and Si3N4f/SiO2, respectively. The stronger fiber-matrix bonding in Si3N4f/SiO2-BN suppresses fiber pull-out, whereas the weaker bonding in the other two composites permits it. Si3N4f/BN primarily exhibits fiber bundle pull-out, whereas Si3N4f/SiO2 shows long single-fiber pull-out, indicating improved damage tolerance. In contrast, Si3N4f/SiO2-BN displays a typical brittle fracture behavior with minimal fiber pull-out and degraded mechanical properties. The excessive interfacial bonding, together with the thermal residual stress arising from the thermal expansion mismatch between the Si3N4 fiber and the matrix, degrades the flexural and compressive strengths. Moreover, this excessive bonding restricts interfacial debonding and fiber pull-out, leading to a brittle fracture mode. Despite differences in interfacial microstructure, all three composites exhibit good dielectric properties. The use of SiO2 and BN matrices effectively reduces both the dielectric constant and dielectric loss tangent of Si3N4 fiber-reinforced ceramic composites. These findings provide valuable insights into the design of high-temperature wave-transparent composites operated in extreme environments.
- Open Access
- 1 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Research
- Vol. 9
Data-Driven Discovery of Composition–Structure–Property Relationship in Novel Wave-Transparent High-Entropy Rare Earth Disilicate
Developing advanced materials with simultaneously excellent wave transparency and efficient thermal insulation is critical for hypersonic vehicles. While rare earth disilicates (RE 2 Si 2 O 7 ) are promising candidates, their vast chemical space and complex polymorphism hinder precise property modulation. Herein, we establish an integrated high-throughput experimental and machine learning strategy to systematically investigate the composition–structure–property relationship of high-entropy RE 2 Si 2 O 7 . The results demonstrate that the average RE 3+ ionic radius determines the phase boundary. Notably, Sc incorporation jointly reduces both the dielectric constant and thermal conductivity. Specifically, the small size and strong electron localization of Sc minimize the polarizability, while its severe size and mass mismatch with other RE elements intensify phonon scattering. The model’s generalization is further validated by designing a series of high-entropy RE 2 Si 2 O 7 containing 5 to 9 distinct RE elements. Ultimately, the (Ho 1/5 Tm 1/5 Yb 1/5 Lu 1/5 Sc 1/5 ) 2 Si 2 O 7 high-entropy ceramic achieves a low dielectric constant ( ε = 5.4) and a low thermal conductivity ( κ = 1.3 W·m −1 ·K −1 ). This data-driven strategy provides a new pathway for the rational design of advanced high-entropy wave-transparent materials for extreme environments.
- 1 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Research
- Vol. 9
Open AccessData-Driven Discovery of Composition–Structure–Property Relationship in Novel Wave-Transparent High-Entropy Rare Earth Disilicate
Developing advanced materials with simultaneously excellent wave transparency and efficient thermal insulation is critical for hypersonic vehicles. While rare earth disilicates (RE 2 Si 2 O 7 ) are promising candidates, their vast chemical space and complex polymorphism hinder precise property modulation. Herein, we establish an integrated high-throughput experimental and machine learning strategy to systematically investigate the composition–structure–property relationship of high-entropy RE 2 Si 2 O 7 . The results demonstrate that the average RE 3+ ionic radius determines the phase boundary. Notably, Sc incorporation jointly reduces both the dielectric constant and thermal conductivity. Specifically, the small size and strong electron localization of Sc minimize the polarizability, while its severe size and mass mismatch with other RE elements intensify phonon scattering. The model’s generalization is further validated by designing a series of high-entropy RE 2 Si 2 O 7 containing 5 to 9 distinct RE elements. Ultimately, the (Ho 1/5 Tm 1/5 Yb 1/5 Lu 1/5 Sc 1/5 ) 2 Si 2 O 7 high-entropy ceramic achieves a low dielectric constant ( ε = 5.4) and a low thermal conductivity ( κ = 1.3 W·m −1 ·K −1 ). This data-driven strategy provides a new pathway for the rational design of advanced high-entropy wave-transparent materials for extreme environments.
- Open Access
- 1 December 2025
- Published by KEAI Publishing in Extreme Materials
- Vol. 1 (4) , 27-32
Screening of CMAS corrosion-resistant RE2SiO5 for environmental barrier coating application by a high-throughput multilayer stacking method
- 1 December 2025
- Published by KEAI Publishing in Extreme Materials
- Vol. 1 (4) , 27-32
Open AccessScreening of CMAS corrosion-resistant RE2SiO5 for environmental barrier coating application by a high-throughput multilayer stacking method
- Open Access
- 17 February 2025
- Published by Wiley in Advanced Science
- Vol. 12 (14) , e2412717
High Throughput Screening of CMAS Corrosion‐Resistant RETaO 4 Based on Lamination Method
Rare earth tantalates (RETaO 4 ), known for their exceptional thermomechanical properties, are promising candidates for next‐generation thermal barrier coatings (TBCs). However, the role of rare earth (RE) species in the CMAS (calcium‐magnesium‐aluminosilicate) corrosion behavior and mechanisms of RETaO 4 remains unclear, hindering their design and application as TBCs. This study employs a high‐throughput approach to systematically investigate the CMAS corrosion mechanisms of RETaO 4 (RE = Nd, Sm, Eu, Gd, Dy, Ho, Y, and Er) at 1300 °C. Precise analysis of the microstructure and composition reveal that the primary corrosion products are (Ca 2‐x RE x )(Ta 2‐y‐z Mg y Al z )O 7 solid solutions, along with minor amounts of Ca 2 RE 8 (SiO 4 ) 6 O 2 apatite. These corrosion products are observed both in the recession layer and at grain boundaries. The CMAS infiltration depth of RETaO 4 increases with the RE ionic radius. First‐principles calculations indicate that the formation enthalpy of corrosion products becomes more exothermic as the RE ionic radius increases, promoting the formation of corrosion products. Additionally, the wetting behavior of liquid CMAS on RETaO 4 at high temperatures supports that RETaO 4 with smaller RE ionic radius present better corrosion resistance. These findings provide insights into the influence of RE species on the CMAS corrosion behavior of RETaO 4 , offering guidelines for the rapid screening of CMAS‐resistant TBC materials.
- 17 February 2025
- Published by Wiley in Advanced Science
- Vol. 12 (14) , e2412717
Open AccessHigh Throughput Screening of CMAS Corrosion‐Resistant RETaO 4 Based on Lamination Method
Rare earth tantalates (RETaO 4 ), known for their exceptional thermomechanical properties, are promising candidates for next‐generation thermal barrier coatings (TBCs). However, the role of rare earth (RE) species in the CMAS (calcium‐magnesium‐aluminosilicate) corrosion behavior and mechanisms of RETaO 4 remains unclear, hindering their design and application as TBCs. This study employs a high‐throughput approach to systematically investigate the CMAS corrosion mechanisms of RETaO 4 (RE = Nd, Sm, Eu, Gd, Dy, Ho, Y, and Er) at 1300 °C. Precise analysis of the microstructure and composition reveal that the primary corrosion products are (Ca 2‐x RE x )(Ta 2‐y‐z Mg y Al z )O 7 solid solutions, along with minor amounts of Ca 2 RE 8 (SiO 4 ) 6 O 2 apatite. These corrosion products are observed both in the recession layer and at grain boundaries. The CMAS infiltration depth of RETaO 4 increases with the RE ionic radius. First‐principles calculations indicate that the formation enthalpy of corrosion products becomes more exothermic as the RE ionic radius increases, promoting the formation of corrosion products. Additionally, the wetting behavior of liquid CMAS on RETaO 4 at high temperatures supports that RETaO 4 with smaller RE ionic radius present better corrosion resistance. These findings provide insights into the influence of RE species on the CMAS corrosion behavior of RETaO 4 , offering guidelines for the rapid screening of CMAS‐resistant TBC materials.
- 1 January 2025
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 40 (1) , 240317
Research Progress on Carbide Ultra-high Temperature Ceramic Anti-ablation Coatings for Thermal Protection System
- 1 January 2025
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 40 (1) , 240317
Research Progress on Carbide Ultra-high Temperature Ceramic Anti-ablation Coatings for Thermal Protection System
- Open Access
- 1 August 2024
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 13 (8) , 1164-1177
Suppressing the phase transition of ZrP 2O 7 by defect and entropy regulation for high-temperature wave-transparent material application
ZrP2O7 is a promising wave-transparent material candidate due to the low dielectric constant and low dielectric loss, while the inherent phase transition characteristic at about 300 ℃ limits its high-temperature application. Therefore, suppressing the phase transition is necessary for ZrP2O7 to serve in extremely harsh environments. In this work, introducing Ti and Hf into ZrP2O7 causes significant lattice distortion and an increase in entropy, both of which synergistically limit the crystal structure transformation. In addition, enhanced phonon scattering by mismatch of atomic mass and local distortion leads to a reduction in the thermal conductivity. Lattice distortions also cause changes in both bond length and tilting angle, so that (Ti1/3Zr1/3Hf1/3)P2O7 does not undergo a sudden expansion like ZrP2O7. (Ti1/3Zr1/3Hf1/3)P2O7 maintains excellent dielectric properties, which highlights it as a promising high-temperature wave-transparent material.
- 1 August 2024
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 13 (8) , 1164-1177
Open AccessSuppressing the phase transition of ZrP 2O 7 by defect and entropy regulation for high-temperature wave-transparent material application
ZrP2O7 is a promising wave-transparent material candidate due to the low dielectric constant and low dielectric loss, while the inherent phase transition characteristic at about 300 ℃ limits its high-temperature application. Therefore, suppressing the phase transition is necessary for ZrP2O7 to serve in extremely harsh environments. In this work, introducing Ti and Hf into ZrP2O7 causes significant lattice distortion and an increase in entropy, both of which synergistically limit the crystal structure transformation. In addition, enhanced phonon scattering by mismatch of atomic mass and local distortion leads to a reduction in the thermal conductivity. Lattice distortions also cause changes in both bond length and tilting angle, so that (Ti1/3Zr1/3Hf1/3)P2O7 does not undergo a sudden expansion like ZrP2O7. (Ti1/3Zr1/3Hf1/3)P2O7 maintains excellent dielectric properties, which highlights it as a promising high-temperature wave-transparent material.
- 1 January 2023
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 39 (3) , 391-+
Corrosion Behavior of Si3N4 Ceramic in High-temperature Molten Salt-water Vapor Environment
- 1 January 2023
- Published by Shanghai Institute of Ceramics in Journal of Inorganic Materials
- Vol. 39 (3) , 391-+
Corrosion Behavior of Si3N4 Ceramic in High-temperature Molten Salt-water Vapor Environment
- Top Cited PapersOpen Access
- 15 June 2022
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 11 (8) , 1279-1293
(Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5 high-entropy ceramic with low thermal conductivity, tunable thermal expansion coefficient, and excellent resistance to CMAS corrosion
Low thermal conductivity, compatible thermal expansion coefficient, and good calcium—magnesium—aluminosilicate (CMAS) corrosion resistance are critical requirements of environmental barrier coatings for silicon-based ceramics. Rare earth silicates have been recognized as one of the most promising environmental barrier coating candidates for good water vapor corrosion resistance. However, the relatively high thermal conductivity and high thermal expansion coefficient limit the practical application. Inspired by the high entropy effect, a novel rare earth monosilicate solid solution (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5was designed to improve the overall performance. The as-synthesized (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5shows very low thermal conductivity (1.07 W·m−1·K−1at 600 °C). Point defects including mass mismatch and oxygen vacancies mainly contribute to the good thermal insulation properties. The thermal expansion coefficient of (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5can be decreased to (4.0–5.9)×10−6K−1due to severe lattice distortion and chemical bonding variation, which matches well with that of SiC ((4.5–5.5)×10−6K−1). In addition, (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5presents good resistance to CMAS corrosion. The improved performance of (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5highlights it as a promising environmental barrier coating candidate.
- 15 June 2022
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 11 (8) , 1279-1293
Top Cited PapersOpen Access(Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5 high-entropy ceramic with low thermal conductivity, tunable thermal expansion coefficient, and excellent resistance to CMAS corrosion
Low thermal conductivity, compatible thermal expansion coefficient, and good calcium—magnesium—aluminosilicate (CMAS) corrosion resistance are critical requirements of environmental barrier coatings for silicon-based ceramics. Rare earth silicates have been recognized as one of the most promising environmental barrier coating candidates for good water vapor corrosion resistance. However, the relatively high thermal conductivity and high thermal expansion coefficient limit the practical application. Inspired by the high entropy effect, a novel rare earth monosilicate solid solution (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5was designed to improve the overall performance. The as-synthesized (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5shows very low thermal conductivity (1.07 W·m−1·K−1at 600 °C). Point defects including mass mismatch and oxygen vacancies mainly contribute to the good thermal insulation properties. The thermal expansion coefficient of (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5can be decreased to (4.0–5.9)×10−6K−1due to severe lattice distortion and chemical bonding variation, which matches well with that of SiC ((4.5–5.5)×10−6K−1). In addition, (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5presents good resistance to CMAS corrosion. The improved performance of (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5highlights it as a promising environmental barrier coating candidate.