Khuong Nhat Nguyen
Research Subjects
Khuong Nhat Nguyen has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Boon Loong Ng
Standards and Mobility Innovation Laboratory, Samsung Research America, Plano, TX, USA
3 shared publications- Abhishek Sehgal
Standards and Mobility Innovation Laboratory, Samsung Research America, Plano, TX, USA
2 shared publications - Anum Ali
Standards and Mobility Innovation Laboratory, Samsung Research America, Plano, TX, USA
2 shared publications Jianzhong Charlie Zhang
Standards and Mobility Innovation Laboratory, Samsung Research America, Plano, TX, USA
2 shared publications- Vutha Va
Standards and Mobility Innovation Laboratory, Samsung Research America, Plano, TX, USA
2 shared publications - Guanbo Chen
Standards and Mobility Innovation Laboratory, Samsung Research America, Plano, TX, USA
1 shared publication
Latest Publications
- Open Access
- 3 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 63298-63309
Enhancing Wi-Fi 7: Traffic Flow Intelligence and Multi-Link Operation for Optimal Efficiency
As the proliferation of Wi-Fi-enabled devices continues to accelerate, there is a pressing need for efficient wireless connectivity solutions. To address this challenge, the introduction of Multi-Link Operation (MLO) in Wi-Fi 7 (IEEE 802.11be) enables clients to establish connections with access points across multiple frequency bands, thereby enhancing throughput and reducing latency at the expense of increased power consumption. To balance the benefits of MLO with its potential impact on smartphone battery life and user experience, we propose an innovative approach that integrates machine learning-based network service detection for Traffic Flow Intelligence with intelligent link adaptation for MLO. Our solution utilizes machine learning to detect latency-sensitive applications with up to 99% accuracy and optimizes link settings based on the Quality of Experience (QoE) of the user relative to the application, detected by our QoE Monitoring Classifier with 99.7% recall for bad QoE and 88% accuracy overall. Notably, our approach enables users to enjoy up to 40 minutes more of high-quality video calls compared to an always-on MLO configuration on the Samsung Galaxy S24 Ultra.
- 3 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 63298-63309
Open AccessEnhancing Wi-Fi 7: Traffic Flow Intelligence and Multi-Link Operation for Optimal Efficiency
As the proliferation of Wi-Fi-enabled devices continues to accelerate, there is a pressing need for efficient wireless connectivity solutions. To address this challenge, the introduction of Multi-Link Operation (MLO) in Wi-Fi 7 (IEEE 802.11be) enables clients to establish connections with access points across multiple frequency bands, thereby enhancing throughput and reducing latency at the expense of increased power consumption. To balance the benefits of MLO with its potential impact on smartphone battery life and user experience, we propose an innovative approach that integrates machine learning-based network service detection for Traffic Flow Intelligence with intelligent link adaptation for MLO. Our solution utilizes machine learning to detect latency-sensitive applications with up to 99% accuracy and optimizes link settings based on the Quality of Experience (QoE) of the user relative to the application, detected by our QoE Monitoring Classifier with 99.7% recall for bad QoE and 88% accuracy overall. Notably, our approach enables users to enjoy up to 40 minutes more of high-quality video calls compared to an always-on MLO configuration on the Samsung Galaxy S24 Ultra.
- Open Access
- 17 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 88692-88706
End-to-End Dynamic Gesture Recognition Using MmWave Radar
Millimeter-wave (mmWave) radar sensors are a promising modality for gesture recognition as they can overcome several limitations of optic sensors typically used for gesture recognition. These limitations include cost, battery consumption, and privacy concerns. This work focuses on finger level (called micro) gesture recognition using mmWave radar. We propose a set of 6 micro-gestures that are not only intuitive and easy to perform for the user but are distinguishable based on Doppler and angle variation in time. For gesture recognition, we propose an end-to-end solution including an activity detection module (ADM) that automatically segments the data and the gesture classifier (GC) that takes the segmented data and predicts the gesture. Both the ADM and GC are based on machine learning (ML) tools. We evaluate the proposed solution using data collected from 11 users and our proposed solution achieves an end-to-end accuracy of 95%.
- 17 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 88692-88706
Open AccessEnd-to-End Dynamic Gesture Recognition Using MmWave Radar
Millimeter-wave (mmWave) radar sensors are a promising modality for gesture recognition as they can overcome several limitations of optic sensors typically used for gesture recognition. These limitations include cost, battery consumption, and privacy concerns. This work focuses on finger level (called micro) gesture recognition using mmWave radar. We propose a set of 6 micro-gestures that are not only intuitive and easy to perform for the user but are distinguishable based on Doppler and angle variation in time. For gesture recognition, we propose an end-to-end solution including an activity detection module (ADM) that automatically segments the data and the gesture classifier (GC) that takes the segmented data and predicts the gesture. Both the ADM and GC are based on machine learning (ML) tools. We evaluate the proposed solution using data collected from 11 users and our proposed solution achieves an end-to-end accuracy of 95%.
- Open Access
- 16 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 133-138
Beam Management with Orientation and RSRP using Deep Learning for Beyond 5G Systems
Beam management (BM), i.e., the process of finding and maintaining a suitable transmit and receive beam pair, can be challenging, particularly in highly dynamic scenarios. Side-information, e.g., orientation, from on-board sensors can assist the user equipment (UE) BM. In this work, we use the orientation information coming from the inertial measurement unit (IMU) for effective BM. We use a data-driven strategy that fuses the reference signal received power (RSRP) with orientation information using a recurrent neural network (RNN). Simulation results show that the proposed strategy performs much better than the conventional BM and an orientation-assisted BM strategy that utilizes particle filter in another study. Specifically, the proposed data-driven strategy improves the beam-prediction accuracy up to 34% and increases mean RSRP by up to 4.2 dB when the UE orientation changes quickly.
- 16 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 133-138
Open AccessBeam Management with Orientation and RSRP using Deep Learning for Beyond 5G Systems
Beam management (BM), i.e., the process of finding and maintaining a suitable transmit and receive beam pair, can be challenging, particularly in highly dynamic scenarios. Side-information, e.g., orientation, from on-board sensors can assist the user equipment (UE) BM. In this work, we use the orientation information coming from the inertial measurement unit (IMU) for effective BM. We use a data-driven strategy that fuses the reference signal received power (RSRP) with orientation information using a recurrent neural network (RNN). Simulation results show that the proposed strategy performs much better than the conventional BM and an orientation-assisted BM strategy that utilizes particle filter in another study. Specifically, the proposed data-driven strategy improves the beam-prediction accuracy up to 34% and increases mean RSRP by up to 4.2 dB when the UE orientation changes quickly.
- Open Access
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 100154-100172
Category-Based 802.11ax Target Wake Time Solution
IEEE 802.11ax newly introduced Target Wake Time (TWT) function which enables joint reduction of device power consumption and wireless medium congestion through negotiated TWT wake interval and duration. We develop a novel solution which can dynamically configure station (STA) wake interval and duration based on run time recognition of the Quality of Service (QoS) requirement including the required latency and throughput. Specifically, a Machine Learning (ML) based Network Service Detection (NSD) module is developed which can detect the current network service in real time and update the STA wake interval according to the corresponding service latency requirement. Moreover, a novel data time estimation model is developed which can estimate the required throughput and wake duration with the observed throughput, linkspeed, and contention level. In addition, a state-machine based method is developed to detect three different traffic types (random, stable, bursty) and their throughput variation pattern for further optimization of the STA wake duration. Our solution is implemented and extensively tested on commercial smart mobile platform under various network conditions and use cases. The results show that our ML based NSD could reach 99.2% and 96.5% accuracy respectively for coarse-grain and fine-grain network service classification, which ensures our TWT solution can accurately recognize and satisfy the QoS requirements. More importantly, while maintaining the QoS and user experience, our solution can substantially reduce the Wi-Fi duty cycle to 29.6% on average, which leads to lower device power consumption and network contention level.
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 100154-100172
Open AccessCategory-Based 802.11ax Target Wake Time Solution
IEEE 802.11ax newly introduced Target Wake Time (TWT) function which enables joint reduction of device power consumption and wireless medium congestion through negotiated TWT wake interval and duration. We develop a novel solution which can dynamically configure station (STA) wake interval and duration based on run time recognition of the Quality of Service (QoS) requirement including the required latency and throughput. Specifically, a Machine Learning (ML) based Network Service Detection (NSD) module is developed which can detect the current network service in real time and update the STA wake interval according to the corresponding service latency requirement. Moreover, a novel data time estimation model is developed which can estimate the required throughput and wake duration with the observed throughput, linkspeed, and contention level. In addition, a state-machine based method is developed to detect three different traffic types (random, stable, bursty) and their throughput variation pattern for further optimization of the STA wake duration. Our solution is implemented and extensively tested on commercial smart mobile platform under various network conditions and use cases. The results show that our ML based NSD could reach 99.2% and 96.5% accuracy respectively for coarse-grain and fine-grain network service classification, which ensures our TWT solution can accurately recognize and satisfy the QoS requirements. More importantly, while maintaining the QoS and user experience, our solution can substantially reduce the Wi-Fi duty cycle to 29.6% on average, which leads to lower device power consumption and network contention level.