XJXiao Jin

Xiao Jin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiao Jin has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A model to determine multiplication and noise in avalanche photodiodes with non-uniform electric field

    by Xiao Jin, Xin Yi, Beng Koon Ng, Chee Hing Tan, Duu Sheng Ong, John P. R. David

    A modification to the random path length technique (RPL) with a hard-threshold dead space (Eth) is demonstrated to be able to calculate the electron initiated avalanche multiplication (Me) and excess noise (Fe) in GaAs p+–i–n+ structures with n- and p-type background doping levels up to 1 × 1017 cm−3 in the multiplication region. This model’s Me, Fe, and position dependent ionization probabilities are compared with the results obtained from a multi-valley analytical band Monte Carlo model, enabling us to quantify how the ionization process is affected when the electric field changes rapidly. The RPL results for Me show excellent agreement with the Monte Carlo model, suggesting that the simple hard dead-space correction to the ionization probability distribution function works as well with a varying electric field up to 1400 kV/cm/μm as in a constant electric field and that the “history dependence” effects of a varying electric field are not very significant once the initial carrier dead space is allowed for. The modified RPL Fe also agrees well with the Monte Carlo model for p+–n−–n+ structures; however, it is underestimated for p+–p−–n+ structures. This is attributed to the hard dead space of the feedback carriers having a disproportionate effect on the variance in the multiplication.


  • Open Access

    A Study of the Avalanche Multiplication and Excess Noise in Al x In 1– x As γ Sb 1- γ Avalanche Photodiodes Lattice-Matched to GaSb

    by Xiao Jin, Wenguang Zhou, Yang Zhao, Qingyu Tian, Xin Yi, Xiaofeng Tao, Adam Craig, Mrudul Modak, Andrew Marshall, Yingqiang Xu, et al.

    High-sensitivity linear-mode avalanche photodiodes (APDs) that operate beyond 1.65 μm and up to 2 μm require a narrow bandgap that also gives rise to high dark currents, especially when subject to the large electric fields necessary for avalanche multiplication. This has led to increasing interest in separate absorption, charge, and multiplication (SACM) detectors where the narrow bandgap absorber has a low electric field and the wider bandgap multiplication region provides the gain. A systematic study of Al0.7In0.3As0.31Sb0.69 grown lattice-matched on GaSb as the multiplication layer has been undertaken on p–i–n structures varying in width from 0.1 to 1.5 μm and the ionization coefficients and excess noise extracted over a wide electric field range (195 kV/cm–830 kV/cm). When integrated with a lattice-matched Al0.3In0.7As0.64Sb0.36 absorption layer, such an SACM APD is found to demonstrate a quantum efficiency of 64% and 10% for the wavelengths of 1.55 and 2 μm, respectively, at punch-through, without any antireflection coating. The device shows a maximum avalanche gain of 197 with an excess noise of 3.1 at a gain of 10. Such APDs can be potentially used in a receiver for many photon-starved applications, including gas sensing and LiDAR.


  • Modelling of electron and hole ionisation in Al x Ga 1− x As 0.56 Sb 0.44 alloys using Weibull–Fréchet distributions

    by Duu Sheng Ong, Xiao Jin, Keat Hoe Yeoh, Ai Hui Tan, Kan Yeep Choo, John P R David

    Accurately modelling of the exceptional low excess noise observed in Al x Ga 1− x As 0.56 Sb 0.44 avalanche photodiodes (APDs) is crucial for optimising device performance. In this study, the random path length model, incorporating the Weibull–Fréchet distribution function, was used to simulate electron and hole impact ionisation in APDs with non-uniform electric fields. The model successfully reproduces the experimentally measured multiplication gain, ⟨ M ⟩ and excess noise factor, F , in electron-initiated APDs with compositions Al 0.55 Ga 0.45 As 0.56 Sb 0.44 , Al 0.75 Ga 0.25 As 0.56 Sb 0.44 , Al 0.85 Ga 0.15 As 0.56 Sb 0.44 , and AlAs 0.56 Sb 0.44 , while also predicting a steep increase in F for hole-initiated APDs. The results demonstrate that ionisation path length distributions are strongly influenced by electric field strength and alloy composition. The model effectively captures the probability density function of ionisation path lengths, which is responsible for low excess noise. The results reveal that electron dead space increases as Al composition decreases, exhibiting an inverse trend compared to the reducing mean ionisation path length in these alloys. This behaviour is attributed to the alloy scattering effects, which become more pronounced in mid-composition alloys.


  • Random path length analysis of gain and noise in e-APDs for electron ionisation characterisation

    by Duu Sheng Ong, Ai Hui Tan, Xiao Jin, John P R David

    Accurate modelling of electron-initiated avalanche photodiodes (e-APDs) requires a precise understanding of electron impact ionisation in semiconductors. This study examines the limitations of the conventional hard-threshold random path length (RPL) model and introduces a field-dependent RPL model, which uses a Weibull-Fréchet distribution to represent the spatial characteristics of ionisation. By fitting the measured gain and excess noise characteristics, this model enables direct extraction of the electron ionisation coefficient as a function of electric field, along with the spatial probability distribution of ionisation events. The model accurately reproduces experimental results for InAs and Hg 07 Cd 03 Te e-APDs, capturing soft-threshold ionisation behaviour and realistic dead space effects. The extracted ionisation coefficients differ significantly from those derived using traditional local models, highlighting the need to re-examine standard extraction methods. This framework offers a physically consistent approach for characterising impact ionisation in low-noise avalanche photodiodes and provides a valuable tool for designing advanced photodetectors.


  • Open Access

    High-performance room temperature 2.75 µm cutoff In0.22Ga0.78As0.19Sb0.81/Al0.9Ga0.1As0.08Sb0.92 avalanche photodiode

    by Xiao Jin, Shouwei Zhao, Adam P. Craig, Qingyu Tian, Lindsay Gilder, Xin Yi, Mark Carmichael, Terry Golding, Chee Hing Tan, Andrew R. J. Marshall, et al.

    Extended shortwave infrared (eSWIR) detectors capable of detecting wavelengths between 1.7 and 2.7 µm are useful for a wide range of applications, such as remote sensing and monitoring, but most of these detectors require cooling to reduce the dark currents. Identifying a suitable material that extends the wavelength range to well beyond 2 µm with minimal cooling is therefore important. The overall sensitivity of such a detector can be enhanced by using it in conjunction with a wide bandgap multiplication region which can increase the photocurrent via impact ionization. In this work, a systematic study of avalanche multiplication in seven Al0.9Ga0.1As0.08Sb0.92 diodes lattice matched to GaSb shows that the electron impact ionization coefficient (α) is larger than the hole impact ionization coefficient (β), especially at low electric fields. Using In0.22Ga0.78As0.19Sb0.89 (bandgap=0.45eV) as the absorber and Al0.9Ga0.1As0.08Sb0.92 (bandgap=1.6eV) as the multiplier in a separate absorption, charge, and multiplication region avalanche photodiode configuration enabled room temperature optical detection up to 2.75 µm with a peak external quantum efficiency (EQE) of >50% at the punch-through voltage (Vpt) ∼2µm wavelength. This device demonstrates a low excess noise of F=4.5 at a multiplication of M=20, giving rise to a noise equivalent power for an unoptimized device of 1.69×10−12W/Hz. A maximum multiplied EQE of >2000% at 2 µm is achieved before a low breakdown voltage of 18.9 V, obtained using a novel undepleted absorber design. This work shows the possibility of a high sensitivity eSWIR detector capable of operating at room temperature.


  • Open Access

    Electroabsorption in InGaAs and GaAsSb p-i-n photodiodes

    by Y. Liu, X. Jin, H. Jung, S. Lee, F. Harun, J. S. Ng, S. Krishna, J. P. R. David

    The application of an electric field to a semiconductor can alter its absorption properties. This electroabsorption effect can have a significant impact on the quantum efficiency of detector structures. The photocurrents in bulk InGaAs and GaAsSb p-i-n photodiodes with intrinsic absorber layer thicknesses ranging from 1 to 4.8 μm have been investigated. By using phase-sensitive photocurrent measurements as a function of wavelength, the absorption coefficients as low as 1 cm−1 were extracted for electric fields up to 200 kV/cm. Our findings show that while the absorption coefficients reduce between 1500 and 1650 nm for both materials when subject to an increasing electric field, an absorption coefficient of 100 cm−1 can be obtained at a wavelength of 2 μm, well beyond the bandgap energy when they are subject to a high electric field. The results are shown to be in good agreement with theoretical models that use Airy functions to solve the absorption coefficients in a uniform electric field.


  • Open Access

    Engineering of Impact Ionization Characteristics in GaAs/GaAsBi Multiple Quantum Well Avalanche Photodiodes

    by Xiaofeng Tao, Xiao Jin, Shiyuan Gao, Xin Yi, Yuchen Liu, Thomas B. O. Rockett, Nicholas. J. Bailey, Faezah Harun, Nada A. Adham, Chee H Tan, et al.

    The presence of large bismuth (Bi) atoms has been shown to increase the spin-orbit splitting energy in bulk GaAsBi, reducing the hole ionization coefficient (beta) and thereby reducing the excess noise seen in avalanche photodiodes. In this study, we show that even very thin layers of GaAsBi introduced as quantum wells (QWs) in a GaAs matrix exhibit a significant reduction of beta while leaving the electron ionization coefficient, alpha, largely unchanged. The optical and avalanche multiplication properties of a series of GaAsBi/GaAs multiple quantum well (MQW) p-i-n structures with nominally 5 nm thick, 4.4% Bi GaAsBi QWs, varying from 5 to 63 periods and corresponding barrier widths of 101 to 4 nm were investigated. From photoluminescence, omega-2 theta X-ray diffraction, and cross section transmission electron microscopy measurements, the material was found to be of high quality despite the strain introduced by the Bi in all except the samples with 54 and 63 QW periods. Photomultiplication measurements undertaken with different wavelengths showed that alpha in these MQW structures did not change appreciably with the number of QWs; however, beta decreased significantly, especially at lower values, the noise factor, F, is reduced by 58% to 3.5 at a multiplication of 10, compared to a similar thickness bulk GaAs structure without any Bi. This result suggests that Bi-containing QWs could be introduced into the avalanching regions of APDs as a way of reducing their excess noise.


  • Open Access

    Impact ionization coefficients and excess noise in Al0.55Ga0.45As0.56Sb0.44 lattice matched to InP

    by Xiao Jin, Harry I. J. Lewis, Xin Yi, Shiyu Xie, Baolai Liang, Diana L. Huffaker, Chee Hing Tan, John P. R. David

    The avalanche multiplication and noise characteristics of Al0.55Ga0.45As0.56Sb0.44p–i–n and n–i–p structures grown lattice matched on InP have been investigated. From measurements undertaken using 530 nm illumination on several devices, the electron (α) and hole (β) impact ionization coefficients have been determined. While α only shows a relatively small increase compared to the higher Al composition alloys of AlxGa1−xAsSb, β is found to increase significantly. Although the β/α ratio is increased to ∼0.125–0.2, higher than the ∼0.003–0.02 seen in the higher-Al alloys, a relatively low excess noise factor of 2.2 was measured in the p-i-n with electron-initiated multiplication of 20. This noise performance is significantly lower than that predicted using a local-field model and comparable to some commercial silicon APDs. This avalanching material with a bandgap of ∼1.24 eV will have the advantages of a smaller band discontinuity with the absorber region and should also operate at a lower voltage.


  • Ionization coefficients and excess noise characteristics of AlInAsSb on an InP substrate

    by T. J. Ronningen, S. H. Kodati, X. Jin, S. Lee, H. Jung, X. Tao, H. I. J. Lewis, M. Schwartz, N. Gajowski, P. Martyniuk, et al.

    For short-wavelength infrared (SWIR) avalanche photodiodes, a separate absorption, charge, and multiplication design is widely used. AlInAsSb on an InP substrate is a potential multiplication layer with a lattice match to absorber candidates across the SWIR. Our new measurements demonstrate that AlInAsSb on InP is a promising multiplier candidate with a relatively low dark current density of 10−4 A/cm2 at a gain of 30; a high gain, measured up to 245 in this study; and a large differentiation of electron and hole ionization leading to a low excess noise, measured to be 2.5 at a gain of 30. These characteristics are all improvements over commercially available SWIR detectors incorporating InAlAs or InP as the multiplier. We measured and analyzed gain for multiple wavelengths to extract the ionization coefficients as a function of an electric field over the range 0.33–0.6 MV/cm.


  • Open Access

    Very low excess noise Al0.75Ga0.25As0.56Sb0.44 avalanche photodiode

    by Xiao Jin, Harry I. J. Lewis, Xin Yi, Shiyu Xie, Baolai Liang, Qingyu Tian, Diana L. Huffaker, Chee Hing Tan, John P. R. David

    AlxGa1-xAsySb1-y grown lattice-matched to InP has attracted significant research interest as a material for low noise, high sensitivity avalanche photodiodes (APDs) due to its very dissimilar electron and hole ionization coefficients, especially at low electric fields. All work reported to date has been on Al concentrations of x = 0.85 or higher. This work demonstrates that much lower excess noise (F = 2.4) at a very high multiplication of 90 can be obtained in thick Al0.75Ga0.25As0.56Sb0.44 grown on InP substrates. This is the lowest excess noise that has been reported in any III-V APD operating at room temperature. The impact ionization coefficients for both electrons and holes are determined over a wide electric field range (up to 650 kV/cm) from avalanche multiplication measurements undertaken on complementary p-i-n and n-i-p diode structures. While these ionization coefficients can fit the experimental multiplication over three orders of magnitude, the measured excess noise is significantly lower than that expected from the β/α ratio and the conventional local McIntyre noise theory. These results are of importance not just for the design of APDs but other high field devices, such as transistors using this material.