Letian Wen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Letian Wen has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Chao Chen
China University of Mining and Technology
5 shared publications - Jianyi Zhou
State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, China
5 shared publications - Wei Hong
Southeast University
5 shared publications - Jixin Chen
Southeast University
3 shared publications - Zhiqiang Yu
State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, China
3 shared publications Liyu Zhu
State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, China
2 shared publications
Latest Publications
- 31 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (3) , 2849-2854
Printed Ridge Gap Waveguide Fed Filtering Magnetoelectric Dipole Antenna Array for 5G Millimeter-Wave Applications
In this paper, a wideband filtering magnetoelectric (ME) dipole antenna without any extra filtering circuits is first proposed for millimeter-wave (MMW) applications. To improve the radiation efficiency, the printed ridge gap waveguide (PRGW) feeding network is employed. The proposed antenna mainly includes four parts: radiation patches, driven stubs, a square substrate integrated waveguide (SIW) cavity, and a fork-shaped PRGW feeding structure. By introducing four U-shaped defected ground structures (DGSs), a radiation null can be obtained at the upper stopband. Meanwhile, two rectangular strips are added to the radiation patches, which not only widens the impedance bandwidth but also enhances the lower stopband suppression level. In addition, the roll-off rate near the lower and upper band edge can be further improved by adding four folded strips. Consequently, desired filtering characteristics are realized. For verifying, a 2 × 2 filtering ME dipole antenna array is fabricated and tested. Measurement results indicate that an impedance bandwidth (|S 11 | < -10 dB) of 23.7% can be achieved, which completely covers the 5G MMW band (24.25 - 29.5 GHz). Besides, an average gain is about 14.5 dBi within the frequency band of interest, whereas the level of the out-of-band radiation suppression is greater than 19.5 dB. What is more, a radiation efficiency of 95.9% is observed at 27.5 GHz.
- 31 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (3) , 2849-2854
Printed Ridge Gap Waveguide Fed Filtering Magnetoelectric Dipole Antenna Array for 5G Millimeter-Wave Applications
In this paper, a wideband filtering magnetoelectric (ME) dipole antenna without any extra filtering circuits is first proposed for millimeter-wave (MMW) applications. To improve the radiation efficiency, the printed ridge gap waveguide (PRGW) feeding network is employed. The proposed antenna mainly includes four parts: radiation patches, driven stubs, a square substrate integrated waveguide (SIW) cavity, and a fork-shaped PRGW feeding structure. By introducing four U-shaped defected ground structures (DGSs), a radiation null can be obtained at the upper stopband. Meanwhile, two rectangular strips are added to the radiation patches, which not only widens the impedance bandwidth but also enhances the lower stopband suppression level. In addition, the roll-off rate near the lower and upper band edge can be further improved by adding four folded strips. Consequently, desired filtering characteristics are realized. For verifying, a 2 × 2 filtering ME dipole antenna array is fabricated and tested. Measurement results indicate that an impedance bandwidth (|S 11 | < -10 dB) of 23.7% can be achieved, which completely covers the 5G MMW band (24.25 - 29.5 GHz). Besides, an average gain is about 14.5 dBi within the frequency band of interest, whereas the level of the out-of-band radiation suppression is greater than 19.5 dB. What is more, a radiation efficiency of 95.9% is observed at 27.5 GHz.
- 10 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (2) , 668-672
Design of a 60 GHz Slot Filtenna Array Using Gap Waveguide Feed Network
In this letter, a three-stage high efficiency filtenna using the gap waveguide (GWG) technology is first proposed for 60 GHz applications. It is based on the bandpass filter theory to seamlessly integrate the high-order mode GWG cavity and the slot antenna, so that good filtering response and compact structure can be easily obtained. Besides, the TE220 mode groove GWG cavity, differentially excited by the dual-slot structure, is implemented to feed 2 × 2 slot antenna elements, which not only enhances the symmetry of the radiation patterns but also lessens the complexity of the feed system. To demonstrate the design principle, a 2×8 millimeter-wave (MMW) slot filtenna array is simulated and manufactured. Simulation outcomes exhibit a reasonable level of concurrence with the measurements obtained. The fabricated filtenna array illustrates that a measured gain of greater than 14.7 dBi, together with a maximum efficiency of up to 89.2%, can be obtained from 59.5 to 60.5 GHz. Also, its radiation suppression level can achieve 26.3 dB in both upper and lower stopbands.
- 10 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (2) , 668-672
Design of a 60 GHz Slot Filtenna Array Using Gap Waveguide Feed Network
In this letter, a three-stage high efficiency filtenna using the gap waveguide (GWG) technology is first proposed for 60 GHz applications. It is based on the bandpass filter theory to seamlessly integrate the high-order mode GWG cavity and the slot antenna, so that good filtering response and compact structure can be easily obtained. Besides, the TE220 mode groove GWG cavity, differentially excited by the dual-slot structure, is implemented to feed 2 × 2 slot antenna elements, which not only enhances the symmetry of the radiation patterns but also lessens the complexity of the feed system. To demonstrate the design principle, a 2×8 millimeter-wave (MMW) slot filtenna array is simulated and manufactured. Simulation outcomes exhibit a reasonable level of concurrence with the measurements obtained. The fabricated filtenna array illustrates that a measured gain of greater than 14.7 dBi, together with a maximum efficiency of up to 89.2%, can be obtained from 59.5 to 60.5 GHz. Also, its radiation suppression level can achieve 26.3 dB in both upper and lower stopbands.
- 12 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (10) , 2532-2536
Design of Evanescent Quad-Ridge Antenna With Compact Transition for 5G Millimeter-Wave Phased-Array Applications
An evanescent quad-ridge antenna (EQA) fed by a compact transition is proposed in this letter for 5G millimeter-wave (mm-wave) phased-array applications. The EQA is realized by an evanescent-mode quad-ridged square waveguide (QRSW) filter with a cross-shaped slot as the radiator. The compact transition is designed by leveraging the coupling between circuits on a multi-layer printed circuit board (PCB) and metal ridges in the QRSW. Thanks to the proposed microstrip-to-QRSW transition, the EQA can be easily installed on a multi-layer PCB and fed by active circuits. The proposed antenna is fabricated and measured. Measurement results show that the antenna can cover the 5G n257 band from 26.5 GHz to 29.5 GHz. For beamforming demonstration, a 4 × 4 EQA array driven by mm-wave active beamformer ICs (BFICs) is designed and measured. The proposed EQA achieves compact size, filtering function, and easy integration with active circuits, which makes it suitable for 5G mm-wave phased-array applications.
- 12 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (10) , 2532-2536
Design of Evanescent Quad-Ridge Antenna With Compact Transition for 5G Millimeter-Wave Phased-Array Applications
An evanescent quad-ridge antenna (EQA) fed by a compact transition is proposed in this letter for 5G millimeter-wave (mm-wave) phased-array applications. The EQA is realized by an evanescent-mode quad-ridged square waveguide (QRSW) filter with a cross-shaped slot as the radiator. The compact transition is designed by leveraging the coupling between circuits on a multi-layer printed circuit board (PCB) and metal ridges in the QRSW. Thanks to the proposed microstrip-to-QRSW transition, the EQA can be easily installed on a multi-layer PCB and fed by active circuits. The proposed antenna is fabricated and measured. Measurement results show that the antenna can cover the 5G n257 band from 26.5 GHz to 29.5 GHz. For beamforming demonstration, a 4 × 4 EQA array driven by mm-wave active beamformer ICs (BFICs) is designed and measured. The proposed EQA achieves compact size, filtering function, and easy integration with active circuits, which makes it suitable for 5G mm-wave phased-array applications.
- 8 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (7) , 1622-1626
Millimeter-Wave Filtering Metasurface Antenna Array With Printed RGW Technology
A millimeter-wave (MMW) printed ridge gap waveguide (PRGW) fed filtering metasurface antenna (MSA) array is presented for 5G applications. The MSA element consists of a parasitic loop and a stacked patch. The elaborately designed parasitic loop around MSA not only provides satisfactory lower stopband performance but also brings an in-band resonance. Meanwhile, another upper edge radiation null is generated by introducing two square-ring slots on the MSA, improving the suppression level. Therefore, with no extra filtering circuits, desirable filtering characteristics are achieved. A 1×4 filtering MSA array is fabricated and tested to demonstrate the concept. Based on measurement results, the array prototype exhibits an overall bandwidth of 27.2% within |S 11 |<-10 dB. Besides, the average tested gain of about 11.1 dBi is realized, and the gain suppression outside the passband exceeds 27 dB on both sides.
- 8 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (7) , 1622-1626
Millimeter-Wave Filtering Metasurface Antenna Array With Printed RGW Technology
A millimeter-wave (MMW) printed ridge gap waveguide (PRGW) fed filtering metasurface antenna (MSA) array is presented for 5G applications. The MSA element consists of a parasitic loop and a stacked patch. The elaborately designed parasitic loop around MSA not only provides satisfactory lower stopband performance but also brings an in-band resonance. Meanwhile, another upper edge radiation null is generated by introducing two square-ring slots on the MSA, improving the suppression level. Therefore, with no extra filtering circuits, desirable filtering characteristics are achieved. A 1×4 filtering MSA array is fabricated and tested to demonstrate the concept. Based on measurement results, the array prototype exhibits an overall bandwidth of 27.2% within |S 11 |<-10 dB. Besides, the average tested gain of about 11.1 dBi is realized, and the gain suppression outside the passband exceeds 27 dB on both sides.
- 22 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (5) , 3785-3796
A Dual-Polarized Aperture-Sharing Phased-Array Antenna for 5G (3.5, 26) GHz Communication
Integrating the sub-6 GHz antenna and the millimeter-wave (mm-wave) antenna in one radiating aperture is a promising approach to support different frequency bands for the incoming communication system. In this paper, an mm-wave dual-polarized 64-element phased-array antenna is integrated into the partially reflective surface (PRS) of a sub-6 GHz resonant cavity antenna (RCA). The PRS consists of two multi-layer printed circuit boards (PCBs), which are stacked together and connected by solder joints. The thick PRS unit cell is designed with a miniaturized footprint at 3.5 GHz and can also contain a 2 × 2 mm-wave active subarray, including four stacked-patch antennas, a beamformer IC (BFIC), and some other input circuits. A copper plate is also inserted in the PRS for thermal control. A prototype antenna is fabricated and measured. Measurement results agree well with the simulation. In the sub-6 GHz band, the proposed antenna demonstrates dual-polarized radiation over the frequency band from 3.45 GHz to 3.58 GHz. In the high-frequency band, the dual-polarized mm-wave array driven by the built-in active beamforming network is capable of scanning ± 45° both in azimuth and elevation over the frequency band from 24.5 GHz to 27 GHz.
- 22 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (5) , 3785-3796
A Dual-Polarized Aperture-Sharing Phased-Array Antenna for 5G (3.5, 26) GHz Communication
Integrating the sub-6 GHz antenna and the millimeter-wave (mm-wave) antenna in one radiating aperture is a promising approach to support different frequency bands for the incoming communication system. In this paper, an mm-wave dual-polarized 64-element phased-array antenna is integrated into the partially reflective surface (PRS) of a sub-6 GHz resonant cavity antenna (RCA). The PRS consists of two multi-layer printed circuit boards (PCBs), which are stacked together and connected by solder joints. The thick PRS unit cell is designed with a miniaturized footprint at 3.5 GHz and can also contain a 2 × 2 mm-wave active subarray, including four stacked-patch antennas, a beamformer IC (BFIC), and some other input circuits. A copper plate is also inserted in the PRS for thermal control. A prototype antenna is fabricated and measured. Measurement results agree well with the simulation. In the sub-6 GHz band, the proposed antenna demonstrates dual-polarized radiation over the frequency band from 3.45 GHz to 3.58 GHz. In the high-frequency band, the dual-polarized mm-wave array driven by the built-in active beamforming network is capable of scanning ± 45° both in azimuth and elevation over the frequency band from 24.5 GHz to 27 GHz.
- 21 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (10) , 1878-1882
High-Gain Dual-Band Resonant Cavity Antenna for 5G Millimeter-Wave Communications
A high-gain dual-band resonant cavity antenna (RCA) for the fifth-generation (5G) millimeter-wave (MMW) communications is presented in this letter. The proposed antenna provides the high gain and large gain-bandwidth product over the 28 GHz band and the 38 GHz band. The heights of the second- and third-order resonant in the RCA are optimized for dual-band operation. Improvements on the gain and the bandwidth are achieved in both bands when stepped rings are added. The gain is further increased with a circular patch on a partially reflective surface, which is made by a substrate of high permittivity. Finally, a prototype is designed, simulated, and verified through measurement. Good performance is achieved: in the 26.5–28 GHz band, the bandwidth is 5.5% and the peak gain is 20.3 dBi; in the 37.5–39.4 GHz band, the bandwidth is 4.9% and the peak gain is 20.4 dBi. The proposed antenna has the features of low cost and easy fabrication as well.
- 21 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (10) , 1878-1882
High-Gain Dual-Band Resonant Cavity Antenna for 5G Millimeter-Wave Communications
A high-gain dual-band resonant cavity antenna (RCA) for the fifth-generation (5G) millimeter-wave (MMW) communications is presented in this letter. The proposed antenna provides the high gain and large gain-bandwidth product over the 28 GHz band and the 38 GHz band. The heights of the second- and third-order resonant in the RCA are optimized for dual-band operation. Improvements on the gain and the bandwidth are achieved in both bands when stepped rings are added. The gain is further increased with a circular patch on a partially reflective surface, which is made by a substrate of high permittivity. Finally, a prototype is designed, simulated, and verified through measurement. Good performance is achieved: in the 26.5–28 GHz band, the bandwidth is 5.5% and the peak gain is 20.3 dBi; in the 37.5–39.4 GHz band, the bandwidth is 4.9% and the peak gain is 20.4 dBi. The proposed antenna has the features of low cost and easy fabrication as well.