T. Ashok Kumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
T. Ashok Kumar has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Retnamony G. Robinson
Department of Civil Engineering, Indian Institute of Technology Madras, Chennai, India
7 shared publications - Thyagaraj Talari
Indian Institute of Technology Madras
7 shared publications - K. S. Sankar Ganesh
National Institute of Technology Puducherry
4 shared publications - Ayushi Yaduvanshi
National Institute of Technology Puducherry
1 shared publication K. S. Sankar Ganesh
National Institute of Technology Puducherry
1 shared publication- R. Sivakumar
National Institute of Technology Puducherry
1 shared publication
Latest Publications
- 14 November 2026
- Published by Springer Nature
- p. 139-151
Assessment of Inherent Variability in Legacy Waste Using Coefficient of Variation and H-Test
- 14 November 2026
- Published by Springer Nature
- p. 139-151
Assessment of Inherent Variability in Legacy Waste Using Coefficient of Variation and H-Test
- 2 July 2026
- Published by Springer Nature
- p. 73-86
Influence of Pore Fluid Cation Valence and Concentration on Liquid Limit of Pond Ash-Bentonite Mixtures
- 2 July 2026
- Published by Springer Nature
- p. 73-86
Influence of Pore Fluid Cation Valence and Concentration on Liquid Limit of Pond Ash-Bentonite Mixtures
- 30 May 2025
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 56 (5) , 2228-2243
Volumetric Durability of Lime Slurry, Fly Ash Slurry, and Lime-Fly Ash Slurry Stabilized Expansive Soil
- 30 May 2025
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 56 (5) , 2228-2243
Volumetric Durability of Lime Slurry, Fly Ash Slurry, and Lime-Fly Ash Slurry Stabilized Expansive Soil
- 21 February 2025
- Published by Geological Society of London in Quarterly Journal of Engineering Geology and Hydrogeology
- Vol. 58 (2)
Statistical analysis of pond ash–bentonite mixtures: implications for liner and cover material design
This study investigates the potential use of pond ash (PA) mixed with varying proportions of bentonite (Bt) (10, 20 or 30%) as a landfill liner and cover material. The laboratory test study covers Atterberg limits, compaction, hydraulic conductivity ( k ) and unconfined compressive strength ( q u ) tests. The test results were analysed using the probabilistic approach to account for uncertainty. While evaluating the PA–Bt mixtures under liner and cover placement conditions, significant variability was observed in the hydraulic conductivity ( k ) and unconfined compressive strength ( q u ), with sample coefficients of variation of 197 and 94%, respectively. To better understand and quantify the variability, the probability density function for k and q u was identified as a log-normal distribution. The inferential statistical analysis limits k and q u standard deviations to 0.66 and 0.17 (key parameters for informed decision-making), respectively. Hypothesis testing was then conducted to assess the suitability of compacted PA–Bt mixtures based on the desired and characteristic values of liner and cover materials. This probabilistic approach allows a more flexible evaluation of placement conditions than deterministic methods, ensuring more reliable performance. Addressing material variability of PA–Bt mixtures allows cost-effective design by exploiting the most probable outcomes.
- 21 February 2025
- Published by Geological Society of London in Quarterly Journal of Engineering Geology and Hydrogeology
- Vol. 58 (2)
Statistical analysis of pond ash–bentonite mixtures: implications for liner and cover material design
This study investigates the potential use of pond ash (PA) mixed with varying proportions of bentonite (Bt) (10, 20 or 30%) as a landfill liner and cover material. The laboratory test study covers Atterberg limits, compaction, hydraulic conductivity ( k ) and unconfined compressive strength ( q u ) tests. The test results were analysed using the probabilistic approach to account for uncertainty. While evaluating the PA–Bt mixtures under liner and cover placement conditions, significant variability was observed in the hydraulic conductivity ( k ) and unconfined compressive strength ( q u ), with sample coefficients of variation of 197 and 94%, respectively. To better understand and quantify the variability, the probability density function for k and q u was identified as a log-normal distribution. The inferential statistical analysis limits k and q u standard deviations to 0.66 and 0.17 (key parameters for informed decision-making), respectively. Hypothesis testing was then conducted to assess the suitability of compacted PA–Bt mixtures based on the desired and characteristic values of liner and cover materials. This probabilistic approach allows a more flexible evaluation of placement conditions than deterministic methods, ensuring more reliable performance. Addressing material variability of PA–Bt mixtures allows cost-effective design by exploiting the most probable outcomes.
- 1 December 2024
- Published by Springer Nature
- p. 461-469
Statistical Assessment of Liquid Limit of Pond Ash-Based Processed Geomaterial
- 1 December 2024
- Published by Springer Nature
- p. 461-469
Statistical Assessment of Liquid Limit of Pond Ash-Based Processed Geomaterial
- 3 September 2024
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 83 (10) , 1-17
Desiccated state free swell index – a simple method for classification of soil expansivity
- 3 September 2024
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 83 (10) , 1-17
Desiccated state free swell index – a simple method for classification of soil expansivity
- 9 April 2024
- Published by Springer Nature
- p. 183-190
Influence of Microplastics on the Hydraulic Conductivity of Riverbed System
- 9 April 2024
- Published by Springer Nature
- p. 183-190
Influence of Microplastics on the Hydraulic Conductivity of Riverbed System
- 17 March 2022
- Published by Springer Nature
- p. 111-118
Effect of Lime Treatment on Expansive Soils at High Initial Water Content
- 17 March 2022
- Published by Springer Nature
- p. 111-118
Effect of Lime Treatment on Expansive Soils at High Initial Water Content
- 18 February 2022
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Ground Improvement
- Vol. 176 (3) , 1-12
Swell–shrink behaviour of fly ash-stabilised expansive soils
Class C fly ash, a byproduct of thermal power plants, is often preferred for the stabilisation of expansive soils. However, improper optimisation of the stabiliser may lead to the premature failure of treated soils during wet–dry cycles. This study demonstrates the volume change behaviour of fly ash-stabilised expansive soils subjected to wet–dry cycles. Furthermore, the effect of class C fly ash and lime–class C fly ash on the physical and engineering properties is also studied. The experimental results showed that addition of 20% fly ash to the expansive soil reduced the swell potential to 0% from an untreated swell value of 10.5%. However, when it was subjected to five wet–dry cycles, the initial cementitious effect of the fly ash on controlling the swell was partially lost, and therefore the volumetric deformation of the stabilised expansive soil increased from 0 to 14.5%. Furthermore, among the different additive combinations used for the treatment of expansive soils, it was observed that the combination of 4% lime and 20% fly ash resulted in the volumetric deformation of only 2.05% even after the fifth wet–dry cycle. Besides, the percentage of desiccation cracks has also reduced significantly from 29 to 0.5%.
- 18 February 2022
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Ground Improvement
- Vol. 176 (3) , 1-12
Swell–shrink behaviour of fly ash-stabilised expansive soils
Class C fly ash, a byproduct of thermal power plants, is often preferred for the stabilisation of expansive soils. However, improper optimisation of the stabiliser may lead to the premature failure of treated soils during wet–dry cycles. This study demonstrates the volume change behaviour of fly ash-stabilised expansive soils subjected to wet–dry cycles. Furthermore, the effect of class C fly ash and lime–class C fly ash on the physical and engineering properties is also studied. The experimental results showed that addition of 20% fly ash to the expansive soil reduced the swell potential to 0% from an untreated swell value of 10.5%. However, when it was subjected to five wet–dry cycles, the initial cementitious effect of the fly ash on controlling the swell was partially lost, and therefore the volumetric deformation of the stabilised expansive soil increased from 0 to 14.5%. Furthermore, among the different additive combinations used for the treatment of expansive soils, it was observed that the combination of 4% lime and 20% fly ash resulted in the volumetric deformation of only 2.05% even after the fifth wet–dry cycle. Besides, the percentage of desiccation cracks has also reduced significantly from 29 to 0.5%.