Mohd Saif Shaikh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mohd Saif Shaikh has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Shengqiang Zhou
Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstrasse 400, 01328 Dresden, Germany
11 shared publications - Mao Wang
Sichuan Normal University of Sichuan Province
7 shared publications - Yonder Berencén
Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
7 shared publications - René Hübner
Helmholtz-Zentrum Dresden-Rossendorf, Institute of Ion Beam Physics and Materials Research, Dresden, Germany
6 shared publications - Slawomir Prucnal
Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstrasse 400, 01328 Dresden, Germany
5 shared publications Manfred Helm
Institute of Ion Beam Physics and Materials Research Helmholtz-Zentrum Dresden-Rossendorf Dresden Germany
4 shared publications
Latest Publications
- 10 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (19)
Dual-band plasmonic resonance-enhanced absorptance in Au/Si:Te heterostructures for mid-infrared applications
This work reveals enhanced infrared optical properties in plasmonic Au/Si:Te heterostructures, where hyperdoped Si:Te layers fabricated via Te ion implantation and flashlamp annealing exhibit ∼20% broadband sub-bandgap absorption across 2–5 μm. Integration with Au nanostructures induces dual plasmonic resonances at 2.7 and 4.4 μm, boosting peak absorptance to 52%–83%. Electromagnetic simulations attribute this enhancement to plasmon-dielectric hybridization, where strong near-field amplification at the Au/Si:Te interface intensifies mid-gap state transitions in Si:Te. Concurrently, resonant energy transfer occurs, as grating-confined surface plasmons concentrate incident radiation, enhancing photon-impurity interactions. Geometric tuning further enables spectral selectivity with wavelength-specific absorption enhancement. The hyperdoped Si:Te heterostructures demonstrate complementary metal-oxide-semiconductor-compatible tailoring of light-matter interactions through hybrid plasmonic and impurity-band effects.
- 10 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (19)
Dual-band plasmonic resonance-enhanced absorptance in Au/Si:Te heterostructures for mid-infrared applications
This work reveals enhanced infrared optical properties in plasmonic Au/Si:Te heterostructures, where hyperdoped Si:Te layers fabricated via Te ion implantation and flashlamp annealing exhibit ∼20% broadband sub-bandgap absorption across 2–5 μm. Integration with Au nanostructures induces dual plasmonic resonances at 2.7 and 4.4 μm, boosting peak absorptance to 52%–83%. Electromagnetic simulations attribute this enhancement to plasmon-dielectric hybridization, where strong near-field amplification at the Au/Si:Te interface intensifies mid-gap state transitions in Si:Te. Concurrently, resonant energy transfer occurs, as grating-confined surface plasmons concentrate incident radiation, enhancing photon-impurity interactions. Geometric tuning further enables spectral selectivity with wavelength-specific absorption enhancement. The hyperdoped Si:Te heterostructures demonstrate complementary metal-oxide-semiconductor-compatible tailoring of light-matter interactions through hybrid plasmonic and impurity-band effects.
- Open Access
- 21 October 2025
- Published by Elsevier in Applied Surface Science
- Vol. 718
Heteroepitaxial growth of β-Ga2O3 thin films on Si (111) substrates via interfacial engineering for self-powered ultraviolet photodetectors
- 21 October 2025
- Published by Elsevier in Applied Surface Science
- Vol. 718
Open AccessHeteroepitaxial growth of β-Ga2O3 thin films on Si (111) substrates via interfacial engineering for self-powered ultraviolet photodetectors
- Open Access
Optical Properties of GePb Alloy Realized by Ion Beam Technology
Incorporating lead (Pb) into the germanium (Ge) lattice emerges as a promising approach for bandgap engineering, enabling luminescence at longer wavelengths and paving the way for enhanced applications in short-wave infrared (SWIR) light sources and photodetectors. In this work, we report on optical properties of GePb alloys fabricated by a complementary metal-oxide semiconductor (CMOS)-compatible process that includes Pb ion implantation followed by solid-phase epitaxial regrowth via flash-lamp annealing. Optical characterization, including photoluminescence spectroscopy and Fourier-transform infrared reflectance spectroscopy, reveals that GePb alloys exhibit a reduced bandgap compared to pure Ge, resulting in longer-wavelength emission, while also providing broadband antireflective properties below 1800 nm wavelengths due to the surface subwavelength nanostructure. These findings position nanostructured GePb as a highly promising candidate for SWIR optoelectronic applications.
Open AccessOptical Properties of GePb Alloy Realized by Ion Beam Technology
Incorporating lead (Pb) into the germanium (Ge) lattice emerges as a promising approach for bandgap engineering, enabling luminescence at longer wavelengths and paving the way for enhanced applications in short-wave infrared (SWIR) light sources and photodetectors. In this work, we report on optical properties of GePb alloys fabricated by a complementary metal-oxide semiconductor (CMOS)-compatible process that includes Pb ion implantation followed by solid-phase epitaxial regrowth via flash-lamp annealing. Optical characterization, including photoluminescence spectroscopy and Fourier-transform infrared reflectance spectroscopy, reveals that GePb alloys exhibit a reduced bandgap compared to pure Ge, resulting in longer-wavelength emission, while also providing broadband antireflective properties below 1800 nm wavelengths due to the surface subwavelength nanostructure. These findings position nanostructured GePb as a highly promising candidate for SWIR optoelectronic applications.
- Open Access
- 14 January 2025
- Published by Springer Nature in Research Square
A high-performance all-silicon photodetector enabling telecom-wavelength detection at room temperature
Photonic integrated circuits (PICs) are crucial for advancing optical communications, promising substantial gains in data transmission speed, bandwidth, and energy efficiency compared to conventional electronics 1 . Telecom-wavelength photodetectors, operating near 1550 nm, are indispensable in PICs, where they enable the sensitive and low-noise conversion of optical signals to electrical signals for efficient data processing. While silicon is ideal for passive optical components, its limited absorption in the optical telecommunication range (1260–1625 nm) typically necessitates integrating an alternative material, such as germanium 2 , for photodetection — a process that introduces significant fabrication challenges 3 . Here, we present a high-performance, all-silicon photodetector, grating- and waveguide-coupled, which operates at room temperature within the optical telecom C band. By introducing deep-level impurities into silicon at concentrations close to the solid-solubility limit, we enable efficient sub-bandgap absorption without compromising recombination carrier lifetimes and mobilities. This detector achieves a responsivity of 0.56 A/W, a quantum efficiency of 44.8%, a bandwidth of 5.9 GHz, and a noise-equivalent power of 4.2×10 − 10 W/Hz¹ / ² at 1550 nm, fulfilling requirements for telecom applications. Our approach provides a scalable and cost-effective solution for the monolithic integration of telecom-wavelength photodetectors into silicon-based PICs, advancing the development of compact photonic systems for modern communication infrastructures.
- 14 January 2025
- Published by Springer Nature in Research Square
Open AccessA high-performance all-silicon photodetector enabling telecom-wavelength detection at room temperature
Photonic integrated circuits (PICs) are crucial for advancing optical communications, promising substantial gains in data transmission speed, bandwidth, and energy efficiency compared to conventional electronics 1 . Telecom-wavelength photodetectors, operating near 1550 nm, are indispensable in PICs, where they enable the sensitive and low-noise conversion of optical signals to electrical signals for efficient data processing. While silicon is ideal for passive optical components, its limited absorption in the optical telecommunication range (1260–1625 nm) typically necessitates integrating an alternative material, such as germanium 2 , for photodetection — a process that introduces significant fabrication challenges 3 . Here, we present a high-performance, all-silicon photodetector, grating- and waveguide-coupled, which operates at room temperature within the optical telecom C band. By introducing deep-level impurities into silicon at concentrations close to the solid-solubility limit, we enable efficient sub-bandgap absorption without compromising recombination carrier lifetimes and mobilities. This detector achieves a responsivity of 0.56 A/W, a quantum efficiency of 44.8%, a bandwidth of 5.9 GHz, and a noise-equivalent power of 4.2×10 − 10 W/Hz¹ / ² at 1550 nm, fulfilling requirements for telecom applications. Our approach provides a scalable and cost-effective solution for the monolithic integration of telecom-wavelength photodetectors into silicon-based PICs, advancing the development of compact photonic systems for modern communication infrastructures.
- Open Access
- 8 January 2025
- Published by Qeios Ltd in Qeios Preprints
A High-Performance All-Silicon Photodetector Enabling Telecom-Wavelength Detection at Room Temperature
Photonic integrated circuits (PICs) are crucial for advancing optical communications, promising substantial gains in data transmission speed, bandwidth, and energy efficiency compared to conventional electronics[1]. Telecom-wavelength photodetectors, operating near 1550 nm, are indispensable in PICs, where they enable the sensitive and low-noise conversion of optical signals to electrical signals for efficient data processing. While silicon is ideal for passive optical components, its limited absorption in the optical telecommunication range (1260-1625 nm) typically necessitates integrating an alternative material, such as germanium[2], for photodetection — a process that introduces significant fabrication challenges[3]. Here, we present a high-performance, all-silicon photodetector, grating- and waveguide-coupled, which operates at room temperature within the optical telecom C band. By introducing deep-level impurities into silicon at concentrations close to the solid-solubility limit, we enable efficient sub-bandgap absorption without compromising recombination carrier lifetimes and mobilities. This detector achieves a responsivity of 0.56 A/W, a quantum efficiency of 44.8%, a bandwidth of 5.9 GHz, and a noise-equivalent power of 4.2×10-10 W/Hz¹/² at 1550 nm, fulfilling requirements for telecom applications. Our approach provides a scalable and cost-effective solution for the monolithic integration of telecom-wavelength photodetectors into silicon-based PICs, advancing the development of compact photonic systems for modern communication infrastructures.
- 8 January 2025
- Published by Qeios Ltd in Qeios Preprints
Open AccessA High-Performance All-Silicon Photodetector Enabling Telecom-Wavelength Detection at Room Temperature
Photonic integrated circuits (PICs) are crucial for advancing optical communications, promising substantial gains in data transmission speed, bandwidth, and energy efficiency compared to conventional electronics[1]. Telecom-wavelength photodetectors, operating near 1550 nm, are indispensable in PICs, where they enable the sensitive and low-noise conversion of optical signals to electrical signals for efficient data processing. While silicon is ideal for passive optical components, its limited absorption in the optical telecommunication range (1260-1625 nm) typically necessitates integrating an alternative material, such as germanium[2], for photodetection — a process that introduces significant fabrication challenges[3]. Here, we present a high-performance, all-silicon photodetector, grating- and waveguide-coupled, which operates at room temperature within the optical telecom C band. By introducing deep-level impurities into silicon at concentrations close to the solid-solubility limit, we enable efficient sub-bandgap absorption without compromising recombination carrier lifetimes and mobilities. This detector achieves a responsivity of 0.56 A/W, a quantum efficiency of 44.8%, a bandwidth of 5.9 GHz, and a noise-equivalent power of 4.2×10-10 W/Hz¹/² at 1550 nm, fulfilling requirements for telecom applications. Our approach provides a scalable and cost-effective solution for the monolithic integration of telecom-wavelength photodetectors into silicon-based PICs, advancing the development of compact photonic systems for modern communication infrastructures.
- 29 August 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (19) , 32966-32976
Enhanced near-infrared absorption in Au-hyperdoped Si: interplay between mid-gap states and plasmon resonance
Detecting near-infrared (NIR) light with high efficiency is crucial for photodetectors that are applied in optical communication systems. Si hyperdoped with deep-level impurities provides a monolithic platform for infrared optoelectronics with room-temperature operation at telecommunication wavelengths. In this work, we present strongly enhanced NIR absorption via the hybridization between plasmon resonance and mid-gap states in Au-hyperdoped Si layers, prepared by ion implantation and pulsed laser melting. The Au-hyperdoped Si layers exhibit high-quality recrystallization with the substitution of Au atoms into the Si matrix and the formation of Au nanoparticles on the surface. Surprisingly, the Au-hyperdoped Si layers exhibit a NIR absorption with spectral response extending up to 1650 nm and a maximum absorptance up to 30%. According to electromagnetic simulations, the enhanced infrared photoresponse can be attributed to the mid-gap states induced by substitutional Au atoms and the localized surface plasmon resonance associated with the Au nanoparticles. This work presents a simplified one-step process to gain significant enhancement of NIR absorption, which paves a way for the realization of Si-based photodetectors with room-temperature operation and outstanding performance.
- 29 August 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (19) , 32966-32976
Enhanced near-infrared absorption in Au-hyperdoped Si: interplay between mid-gap states and plasmon resonance
Detecting near-infrared (NIR) light with high efficiency is crucial for photodetectors that are applied in optical communication systems. Si hyperdoped with deep-level impurities provides a monolithic platform for infrared optoelectronics with room-temperature operation at telecommunication wavelengths. In this work, we present strongly enhanced NIR absorption via the hybridization between plasmon resonance and mid-gap states in Au-hyperdoped Si layers, prepared by ion implantation and pulsed laser melting. The Au-hyperdoped Si layers exhibit high-quality recrystallization with the substitution of Au atoms into the Si matrix and the formation of Au nanoparticles on the surface. Surprisingly, the Au-hyperdoped Si layers exhibit a NIR absorption with spectral response extending up to 1650 nm and a maximum absorptance up to 30%. According to electromagnetic simulations, the enhanced infrared photoresponse can be attributed to the mid-gap states induced by substitutional Au atoms and the localized surface plasmon resonance associated with the Au nanoparticles. This work presents a simplified one-step process to gain significant enhancement of NIR absorption, which paves a way for the realization of Si-based photodetectors with room-temperature operation and outstanding performance.
- Open Access
- 2 June 2024
- Published by Wiley in Physica Status Solidi (a)
- Vol. 221 (24)
Extended Infrared Absorption in Nanostructured Si Through Se Implantation and Flash Lamp Annealing
Nanostructured silicon can reduce reflectance loss in optoelectronic applications, but intrinsic silicon cannot absorb photons with energy below its 1.1 eV bandgap. However, incorporating a high concentration of dopants, i.e., hyperdoping, to nanostructured silicon is expected to bring broadband absorption ranging from UV to short‐wavelength IR (SWIR, <2500 nm). In this work, we prepare nanostructured silicon using cryogenic plasma etching, which is then hyperdoped with selenium (Se) through ion implantation. Besides sub‐bandgap absorption, ion implantation forms crystal damage, which can be recovered through flash lamp annealing. We study crystal damage and broadband (250–2500 nm) absorption from planar and nanostructured surfaces. We first show that nanostructures survive ion implantation hyperdoping and flash lamp annealing under optimized conditions. Secondly, we demonstrate that nanostructured silicon has a 15% higher sub‐bandgap absorption (1100–2500 nm) compared to its non‐hyperdoped nanostructure counterpart while maintaining 97% above‐bandgap absorption (250–1100 nm). Lastly, we simulate the sub‐bandgap absorption of hyperdoped Si nanostructures in a 2D model using the finite element method. Simulation results show that the sub‐bandgap absorption is mainly limited by the thickness of the hyperdoped layer rather than the height of nanostructures.
- 2 June 2024
- Published by Wiley in Physica Status Solidi (a)
- Vol. 221 (24)
Open AccessExtended Infrared Absorption in Nanostructured Si Through Se Implantation and Flash Lamp Annealing
Nanostructured silicon can reduce reflectance loss in optoelectronic applications, but intrinsic silicon cannot absorb photons with energy below its 1.1 eV bandgap. However, incorporating a high concentration of dopants, i.e., hyperdoping, to nanostructured silicon is expected to bring broadband absorption ranging from UV to short‐wavelength IR (SWIR, <2500 nm). In this work, we prepare nanostructured silicon using cryogenic plasma etching, which is then hyperdoped with selenium (Se) through ion implantation. Besides sub‐bandgap absorption, ion implantation forms crystal damage, which can be recovered through flash lamp annealing. We study crystal damage and broadband (250–2500 nm) absorption from planar and nanostructured surfaces. We first show that nanostructures survive ion implantation hyperdoping and flash lamp annealing under optimized conditions. Secondly, we demonstrate that nanostructured silicon has a 15% higher sub‐bandgap absorption (1100–2500 nm) compared to its non‐hyperdoped nanostructure counterpart while maintaining 97% above‐bandgap absorption (250–1100 nm). Lastly, we simulate the sub‐bandgap absorption of hyperdoped Si nanostructures in a 2D model using the finite element method. Simulation results show that the sub‐bandgap absorption is mainly limited by the thickness of the hyperdoped layer rather than the height of nanostructures.
- Open Access
- 15 May 2024
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 179
Room-temperature telecom Si:Te PIN planar photodiodes: A study on optimizing device dimensions
- 15 May 2024
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 179
Open AccessRoom-temperature telecom Si:Te PIN planar photodiodes: A study on optimizing device dimensions
- Open Access
- 1 April 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (14)
Charge transport in n-type As- and Sb-hyperdoped Ge
This paper presents a systematic study of the charge transport behavior of heavily doped n-type Ge layers with As and Sb. A nonequilibrium method ion implantation followed by milliseconds flash lamp annealing is applied to synthesize the n++ Ge layers (Ge:As and Ge:Sb). The resulting materials contain free electrons with a density above 3 × 1019 cm−3 and mobility more than 220 cm2/(V s). Quantum corrections to the conductance in a magnetic field are observed at low temperatures. Weak localization persists up to 30 K in Ge:Sb, while only up to 10 K in Ge:As. Using the Hikami–Larkin–Nagaoka model to fit the magnetoconductance data, we obtain the phase coherence length lϕ of the hyperdoped Ge samples in the range of 70–163 nm. This study may pave a way to explore possible applications for quantum technologies utilizing As- and Sb-hyperdoped Ge.
- 1 April 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (14)
Open AccessCharge transport in n-type As- and Sb-hyperdoped Ge
This paper presents a systematic study of the charge transport behavior of heavily doped n-type Ge layers with As and Sb. A nonequilibrium method ion implantation followed by milliseconds flash lamp annealing is applied to synthesize the n++ Ge layers (Ge:As and Ge:Sb). The resulting materials contain free electrons with a density above 3 × 1019 cm−3 and mobility more than 220 cm2/(V s). Quantum corrections to the conductance in a magnetic field are observed at low temperatures. Weak localization persists up to 30 K in Ge:Sb, while only up to 10 K in Ge:As. Using the Hikami–Larkin–Nagaoka model to fit the magnetoconductance data, we obtain the phase coherence length lϕ of the hyperdoped Ge samples in the range of 70–163 nm. This study may pave a way to explore possible applications for quantum technologies utilizing As- and Sb-hyperdoped Ge.
- Open Access
- 7 January 2024
- Published by Elsevier in Applied Surface Science
- Vol. 652
Tunable magneto-transport properties in ultra-high Bi-doped Si prepared by liquid phase epitaxy
- 7 January 2024
- Published by Elsevier in Applied Surface Science
- Vol. 652
Open AccessTunable magneto-transport properties in ultra-high Bi-doped Si prepared by liquid phase epitaxy